Densities,Ultrasonic Speeds,Viscosities and Refractive Indices of Binary Mixtures of Benzene with Benzyl Alcohol,Benzonitrile, Benzoyl Chloride and Chlorobenzene at 303.15 K

Densities,ρ, ultrasonic speeds, u, viscosities,η, and refractive indices, n, of pure benzene, benzyl alcohol (BA), benzonitrile (BN), benzoyl chloride (BC), chlorobenzene (CB) and their thirty six binary mixtures, with benzene as common component, were measured at 303.15 K over the entire mole fraction range. From these experimental data the values of deviations in ultrasonic speed, △u, isentropic compressibility, △k_s,excess acoustic impedance, Z^E, deviation in viscosity, Dh, and excess Gibbs free energy of activation of viscous flow, G^*E, and partial molar isentropic compressibility, Kφ,2⁰ of BA, BN, BC and CB in benzene were computed. The variation of these derived functions with composition of the mixtures suggested the increased cohesion (molecular order) in the solution and that interaction (A-B)＞(A-A) or (B-B).Moreover, theoretical prediction of ultrasonic speed, viscosity and refractive index of all the four binary mixtures was made on the basis of empirical and semi-empirical relations by using the experimental values of the pure components. Comparison of theoretical results with the experimental values was made in order to assess the suitability of these relations in reproducing the experimental values of u, η and n. Also, molecular radii of pure liquids and the average molecular radii of binary mixtures were evaluated using the corresponding refractive indices of pure liquids and binary mixtures. The average molecular radii of binary mixtures were found to be additive with respect to mole fraction of the pure component.     

Refractive Indices, Densities and Excess Molar Volumes of Monoalcohols + Water

The refractive index, n _D , and density, ρ, of binary mixtures of monoalcohols + water, have been measured at a temperature of 298.15,K and atmospheric pressure. The variation of the refractive indices of these solutions has also been determined with temperature in the range T = (278.15 to 338.15) K and atmospheric pressure. A comparative study has been made of the refractive indices obtained experimentally and those calculated by means of the Lorentz-Lorenz [Theory of Electrons, Dover Phoenix (1952)] and Gladstone-Dale relations [Trans. R. Soc. London 148:887–902 (1858)]; in all cases, the Gladstone–Dale equation was seen to afford values similar to those obtained experimentally. Calculations have been made of the excess molar volumes, V ^E, and the molar refraction deviations, ΔR, of these mixtures and the differences between the experimental values for refractive index and those obtained by means of the Gladstone–Dale equation. Values of V ^E were compared with others in the literature. In all cases the V ^E values were negative, and in all cases, except in the methanol + water, ΔR showed a maximum for x = 0.8.     

Densities,Viscosities and Speeds of Sound of Binary Mixtures of Ethyl Benzoate + Hydrocarbons at (303.15, 308.15 and 313.15) K

Densities, viscosities and speeds of sound of binary mixtures of ethyl benzoate with cyclohexane, n-hexane, heptane and octane have been measured over the entire range of composition at (303.15, 308.15 and 313.15) K and at atmospheric pressure. From these experimental values, excess molar volume (V ^E), deviation in viscosity (Δη) and deviation in isentropic compressibility (ΔK _s) have been calculated. The viscosities of binary mixtures were calculated theoretically from the pure component data by using various empirical and semi-empirical relations and the results compared with the experimental findings.     

Volumetric Properties and Refractive Indices for Binary Mixtures of 1-Propyronitrile-3-hexylimidazolium Bromide + Ethanol at Temperatures from 293.15 to 323.15 K

Densities and refractive indices have been measured for binary mixtures of 1-propyronitrile-3-hexylimidazolium bromide + ethanol in the temperature range 293.15–323.15 K. From the experimental data the excess molar volume V ^E, refractive index deviation Δn _D, and the coefficient of thermal expansion α were calculated and fitted to fifth- and third-order Redlich–Kister type equations, respectively. Using the measured densities, the apparent molar volumes (V _ϕ ), limiting apparent molar volumes (V_f⁰V_{phi}^{0}) and limiting apparent molar expansivities (E_f ⁰E_{phi} ^{0}) were also determined and the details are discussed.     

On the viscosity Arrhenius temperature for methanol + N,N-dimethylformamide binary mixtures over the temperature range from 303.15 to 323.15 K

Excess properties calculated from literature values of experimental density and viscosity in N,N-dimethylformamide (DMF) + methanol (Met) binary mixtures (from 303.15 to 323.15 K) can lead us to test different correlation equations as well as their corresponding derivative properties. Inspection of the Arrhenius activation energy (E_a) and the enthalpy (ΔH*) of activation of viscous flow shows very close values; here, we can define partial molar activation energies E_a1 and E_a2 for N,N-DMF and Met, respectively, along with their individual contribution separately. Correlation between the two Arrhenius parameters of viscosity in all compositions shows existence of main distinct interaction behaviours delimited by particular mole fractions in N,N-DMF. In addition, we add that correlation between Arrhenius parameters reveals interesting Arrhenius temperature that is closely related to the vaporisation temperature in the liquid vapour equilibrium, and the limiting corresponding partial molar properties can permit us to estimate the boiling points of the pure components.     

Changes of Refractive Indices for the Ternary Mixture Acetone + Methanol + N-Hexane at 288.15 and 298.15 K

Abstract

The refractive indices of the ternary mixture acetone + methanol + n-hexane have been measured at 288.15 and 298.15 K and atmosphere in the whole composition diagram. Parameters of polynomial equations which represent the composition dependence of physical and derived property are gathered. the use of a multicomponent extension of Heller equation in order to predict excess molar volumes from refractive indices on mixing are tested against literature data, a comparative accuracy with currently available models being obtained.     

Excess molar volumes of (cyclohexanone+trichloromethane,or 1,2-dichloroethane,or trichloroethene,or 1,1,1-trichloroethane,or cyclohexane) at T=308.15 K,and of (cyclohexanone+dichloromethane) at T=303.15 K

Excess molar volumes V_m^E have been measured using a dilatometric technique for mixtures of cyclohexanone (C₆H₁₀O) with trichloromethane (CHCl₃), 1,2-dichloroethane (CH₂ClCH₂Cl), trichloroethene (CHClCCl₂), 1,1,1-trichloroethane (CCl₃CH₃), and cyclohexane (c-C₆H₁₂) at T=308.15 K, and for cyclohexanone+dichloromethane (CH₂Cl₂) at T=303.15 K. Throughout the entire range of the mole fraction χ of C₆H₁₀O, V_m^E has been found to be positive for χ C₆H₁₀O+(1−χ)c-C₆H₁₂, and negative for χ C₆H₁₀O+(1−χ)CH₂Cl₂, χ C₆H₁₀O+(1−χ)CHClCCl₂, χ C₆H₁₀O+(1−χ)CHCl₃, and χ C₆H₁₀O+(1−χ) CCl₃CH₃. For χ C₆H₁₀O+(1−χ)CH₂ClCH₂Cl, V_m^E has been found to be positive at lower values of χ and negative at high values of χ, with inversion of sign from positive to negative values of V_m^E for this system occurring at χ∼0.78. Values of V_m^E for the various systems have been fitted by the method of least squares with smoothing equation, and have been discussed from the viewpoint of the existence specific interactions between the components.     

Densities and Viscosities for the Binary Mixtures (2-Methyl-1-Chloropropane + Isomeric Butanol) at 298.15 and 313.15 K

Abstract

This paper reports excess volumes, V^E , and viscosity deviations, Δ\eta, for binary mixtures of 2-methyl-1-chloropropane with an isomer of butanol at the temperatures 298.15 K and 313.15 K. These properties were obtained from density and viscosity measurements. The results are correlated by means of a Redlich-Kister type equation, and interpreted in terms of molecular interactions. The systems show positive values of V^E except in a short range of compositions for mixtures containing primary butanols (1-butanol at both temperatures and 2-methyl-1-propanol at 298.15 K), whereas Δ\eta presents negative values at both temperatures over the whole composition range.     

Measurement and Correlation of Viscosities, Densities, and Water Activities for the System Poly(propylene glycol) + MgSO4 + H2O at 25°C

Viscosities, densities, and water activities for binary and ternary systems of poly(propylene glycol) 425 + H₂O and poly(propylene glycol) 425 + MgSO₄ + H₂O have been measured at 25°C. From density and viscosity measurements, excess volumes and excess viscosities of the binary poly(propylene glycol) 425 + H₂O, over the entire composition range, were obtained and correlated by means of a Redlich–Kister type equation. Viscosity, density. and water activity data for ternary system of poly(propylene glycol) 425 + MgSO₄ + H₂O were correlated by using a semiempirical equation.     

Excess properties and spectroscopic studies of binary system 1,4-butanediol + water at T = (293.15, 298.15, 303.15, 308.15, 313.15 and 318.15) K

Density and dynamic viscosity data were measured over the whole concentration range for the binary system 1,4-butanediol (1) + water (2) at T = (293.15, 298.15, 303.15, 308.15, 313.15, and 318.15) K as a function of composition under atmospheric pressure. Based on density and dynamic viscosity data, excess molar density (ρ^E), dynamic viscosity deviation (Δν) and excess molar volume (V_m^E) were calculated. From the dynamic viscosity data, excess Gibbs energies (ΔG*^E), Gibbs free energy of activation of viscous flow (ΔG*), enthalpy of activation for viscous flow (ΔH*) and entropy of activation for viscous flow (ΔS*) were also calculated. The ρ^E, V_m^E, Δν and ΔG*^E values were correlated by a Redlich?Kister-type function to obtain the coefficients and to estimate the standard deviations between the experimental and calculated quantities. Based on FTIR and UV spectral results, the intermolecular interaction of 1,4-butanediol with H₂O was discussed.     

Densities and Excess Molar Volumes of Alkane (Heptane, Octane, Nonane, or Decane) + Thiophene from T=293.15 to 313.15 K

Densities of four binary systems composed of an alkane (heptane, octane, nonane, or decane) and thiophene were measured at temperatures from 293.15 to 313.15?K at atmospheric pressure (0.7?atm). Measurements were made covering the full range of compositions for all systems studied and for the pure compounds by using a vibrating-tube densimeter (VTD). Excess molar volumes have been obtained from these experimental results and were fitted to a Redlich?CKister type expansion. The excess molar volumes exhibit positive deviations from ideal behavior for all of the binary systems studied here.     

Liquid Densities and Excess Molar Volumes for Binary Systems (Ionic Liquids + Methanol or Water) at 298.15, 303.15 and 313.15 K,and at Atmospheric Pressure

Binary excess molar volumes, V _m ^E, have been evaluated from density measurements, using a vibrating tube densimeter over the entire composition range for binary liquid mixtures of ionic liquids 1-ethyl-3-methyl-imidazolium diethyleneglycol monomethylethersulphate [EMIM]⁺[CH₃(OCH₂CH₂)₂OSO₃]⁻ or 1-butyl-3-methyl-imidazolium diethyleneglycol monomethylethersulphate [BMIM]⁺[CH₃(OCH₂CH₂)₂OSO₃]⁻ or 1-methyl-3-octyl-imidazolium diethyleneglycol monomethylethersulphate [MOIM]⁺[CH₃(OCH₂CH₂)₂OSO₃]⁻+methanol and [EMIM]⁺[CH₃(OCH₂CH₂)₂OSO₃]⁻+water at 298.15, 303.15 and 313.15 K. The V _m ^E values were found to be negative for all systems studied. The V _m ^E results are explained in terms of intermolecular interactions and packing effects. The experimental data were fitted by the Redlich-Kister polynomial.     

Viscosities,densities and speeds of sound of the binary systems: 2-propanol with octane,or decane,or dodecane at T=(293.15, 298.15, and 303.15) K

Viscosities, densities and speed of sound have been measured over the whole composition range for (2-propanol with octane, or decane, or dodecane) at T=(293.15, 298.15, and 303.15) K and atmospheric pressure along with the properties of the pure components. Excess molar volumes, isentropic compressibility, deviations in isentropic compressibility and viscosity deviations for the binary systems at the above-mentioned temperatures were calculated and fitted to Redlich–Kister equation to determine the fitting parameters and the root-mean-square deviations. Prediction of the dynamic viscosities of this binary mixture from UNIFAC-VISCO and ASOG-VISCO methods has been determined.     

Kinetics and mechanism of the CF3 + NO2, reaction at T = 298 K

The rate constant for the CF₃ + NO₂ reaction (k₂) was measured at room temperature in the range of total pressures 300–600 torr. The measurements were performed using the ruby-laser-induced pulsed photodissociation of CF₃NO in the presence of NO and NO₂ in combination with time-resolved detection of the absorption of He(SINGLE BOND)Ne laser radiation by CF₃NO. The use of the CF₃ + NO reaction as a reference gives k₂ = (3.2 ± 0.7) × 10⁻¹¹ cm³/s. Analysis of the end products of the CF₃ + NO₂ reaction shows that the contribution of the association reaction channel, which leads to the formation of CF₃NO₂, is rather significant (about 30% total yield). A reaction mechanism is suggested to account for the products observed. © 1997 John Wiley & Sons, Inc. Int J Chem Kinet 29: 203–208, 1997.     

Densities,speeds of sound and refractive indices for binary and ternary mixtures of {diethylcarbonate (1) + p-chloroacetophenone (2) + 1-hexanol (3)} at 303.15 K for the liquid region and at ambient pressure

Densities (ρ), speeds of sound (u) and refractive indices (n_D ), of the ternary mixture (diethylcarbonate + p-chloroacetophenone + 1-hexanol) and the involved binary mixtures (diethylcarbonate + p-chloroacetophenone, diethylcarbonate + 1-hexanol, and p-chloroacetophenone + 1-hexanol) have been measured over the whole composition range at 303.15 K for the liquid region and at ambient pressure. The data obtained are used to calculate isentropic compressibilities k_s , isentropic compressibility deviations Δk_s and refractive index deviations Δn_D , of the binary and ternary mixtures. The data of isentropic compressibility deviations and refractive index deviations of the binary systems were fitted to the Redlich–Kister equation while the best correlation method for the ternary system was found using the Cibulka equation. The experimental data of the constitute binaries and ternaries are analysed to discuss the nature and strength of intermolecular interactions in these mixtures.     

Isopiestic Determination of the Osmotic and Activity Coefficients of Li2SO4(aq) at T=298.15 and 323.15 K, and Representation with an Extended Ion-Interaction (Pitzer) Model

Isopiestic vapor-pressure measurements were made for Li₂SO₄(aq) from 0.1069 to 2.8190 mol?kg^?1 at 298.15 K, and from 0.1148 to 2.7969 mol?kg^?1 at 323.15 K, with NaCl(aq) as the reference standard. Published thermodynamic data for this system were reviewed, recalculated for consistency, and critically assessed. The present results and the more reliable published results were used to evaluate the parameters of an extended version of Pitzer’s ion-interaction model with an ionic-strength dependent third-virial coefficient, as well as those of the standard Pitzer model, for the osmotic and activity coefficients at both temperatures. Published enthalpies of dilution at 298.15 K were also analyzed to yield the parameters of the ion-interaction models for the relative apparent molar enthalpies of dilution. The resulting models at 298.15 K are valid to the saturated solution molality of the thermodynamically stable phase Li₂SO₄?H₂O(cr). Solubilities of Li₂SO₄?H₂O(cr) at 298.15 K were assessed and the selected value of m(sat.)=3.13±0.04 mol?kg^?1 was used to evaluate the thermodynamic solubility product K _s(Li₂SO₄?H₂O, cr, 298.15 K) = (2.62±0.19) and a CODATA-compatible standard molar Gibbs energy of formation Δ_f G _m ^o (Li₂SO₄?H₂O, cr, 298.15 K) = ?(1564.6±0.5) kJ?mol^?1.