Thermal stability of ketoprofen��active substance and tablets

Simultaneous thermoanalytical techniques were used for the characterization of the thermal decomposition of ketoprofen??active substance and tablets. DTA and DSC curves showed that ketoprofen melts before the decomposition. A kinetic study regarding the ketoprofen??active substance??s thermal decomposition was performed under non-isothermal conditions and in a nitrogen atmosphere at five heating rates: 2.5, 5, 7.5, 10 and 15 °C min^?1. The kinetic parameters of thermal decomposition process were obtained from TG/DTG curves using the following differential methods: Friedman isoconversional, Chang, respectively, integral methods: Flynn?CWall?COzawa, Kissinger?CAkahira?CSunose, Coats?CRedfern and Madhusudanan. The careful treatment of the kinetic parameters obtained in certain thermal conditions was confirmed to be necessary as well as a different strategy of experimental data processing.     

Inclusion of α-lipoic acid in β-cyclodextrin. Physical–chemical and structural characterization

The inclusion of α-lipoic acid (LA) in β-cyclodextrin (β-CD) by increasing the aqueous solubility and photostability can enhance its medicinal use in the oral administration. Different preparation methods were employed to obtain an α-lipoic acid-β-cyclodextrin (LA-β-CD) inclusion complex and to determine the physical–chemical characteristics and the interactions present in this compound. The formation of the solid inclusion compound was confirmed by X-ray powder diffraction, differential scanning calorimetry (DSC) and infrared spectroscopy (FTIR). FTIR and DSC data confirm the new obtained compound. The crystalline structure of this compound belongs to the monoclinic system with four molecules in the unit cell. ¹H NMR spectroscopic method was employed to study the inclusion process in aqueous solution. Job plots derived from the ¹H NMR spectral data demonstrated an 1:1 stoichiometry of the inclusion complex in liquid state. 2D NMR data suggest the orientation of LA with the carboxyl group near to narrower rim of the β-CD.     

Physical–chemical and microstructural study of shells of the Lucina Pectinata species

Journal of Thermal Analysis and Calorimetry - Lucina pectinata, popularly called Lambreta, is a delicacy very consumed in Bahian cuisine. The shell is composed of nacreous layers formed by keratin,...     

Thermodynamic characterization of proflavine–DNA binding through microcalorimetric studies

The interaction of an important acridine dye, proflavine hydrochloride, with double stranded DNA was investigated using isothermal titration calorimetry and differential scanning calorimetry. The equilibrium constant for the binding reaction was calculated to be (1.60 ± 0.04) · 10⁵ · M⁻¹ at T = 298.15 K. The binding of proflavine hydrochloride to DNA was favored by both negative enthalpy and positive entropy contributions to the Gibbs energy. The equilibrium constant for the binding reaction decreased with increasing temperature. The standard molar enthalpy change became increasingly negative while the standard molar entropy change became less positive with rise in temperature. However, the standard molar Gibbs free energy change varied marginally suggesting the occurrence of enthalpy–entropy compensation phenomenon. The binding reaction was dominated by non-polyelectrolytic forces which remained virtually unchanged at all the salt concentrations studied. The binding also significantly increased the thermal stability of DNA against thermal denaturation.     

Thermoanalytical and spectroscopic characterization ofβ-cyclodextrin/ketoprofen inclusion complexes

A method to determine the composition and hydration state of the complexes formed in aqueous solution by cyclodextrins (CD) is presented and applied to the -CD/ketoprofen system; it is based on a combination of spectroscopic, calorimetric, and thermogravimetric analyses. The complexes have, on average and per -CD mole, more than eleven water molecules, which are present in completely different bound states.     

Physical–chemical properties of nickel analogs ionic liquid based on choline chloride

In this paper, a homogeneous, green analogs ionic liquid containing choline chloride and nickel chloride hexahydrate is formed. The structure of the analogs ionic liquid is preliminary investigated by Fourier transform infrared spectroscopy. It is shown that the nickel chloride hexahydrate bond via hydrogen bonds with choline chloride and urea. The physico-chemical properties of the analogs ionic liquid such as viscosity, conductivity, density, and thermal stability are measured as a function of temperature and composition. The thermal expansion coefficients (r), the molar Gibbs energy of activation (ΔG*) for viscous flow, the molar enthalpy of activation (ΔH*), and the molar entropy of activation (ΔS*) for viscous flow have been calculated. A straight-line equation is used to fit the density data while the Arrhenius equation is used to fit both viscosity and conductivity. Thermal stability of analogs ionic liquid was carried out from room temperature to 973.15 K. It indicates that analogs ionic liquid is stable from room temperature to 488.2 K.     

Physical–chemical characterization of new anti-inflammatory agent (LPSF/GQ-130) and evaluation of its thermal compatibility with pharmaceutical excipients

LPSF/GQ-130 is a drug candidate, according to reports about its significant anti-inflammatory activity and non-toxicity demonstrated in an acute preclinical study. Despite this, knowledge of its physical–chemical properties is insufficient for the development of medicines. Thus, this work aimed to characterize the raw material at its molecular, particle, and agglomerate level as well as evaluate its thermal compatibility to pharmaceutical excipients. Through spectrometric techniques the molecular structure of the substance was confirmed. For thermal analysis its melting (171.3–176.5 °C) and degradation (238.3–297.4 °C) ranges, besides its purity (99.37 %), were determined. The kinetic non-isothermal degradation supplied the order of thermal reaction (0), the activation energy (96.14 kJ mol^?1) and the frequency factor (3.130 × 10^?7 min^?1). The diffraction of X-rays presented well defined signs in the angles 5.5°, 16.3°, and 44.18° 2θ, suggesting crystalline structure. Scanning electronic microscopy exhibited needle morphology. LPSF/GQ-130 presented Type-III isotherm adsorption/desorption, with a superficial area of 81.3529 m² g^?1 and water content calculated at 1 % using the Karl Fisher method. Laser granulometry calculated its granulometry between 11.65 and 13.10 μm, thus it was characterized as a very fine powder. The prototype was classified as insoluble in water (<0.0187 μg mL^?1) and soluble in acetone and acetonitrile, and exhibits instability in basic pH (100 %) and oxidative conditions (30–70 %). In thermal compatibility the excipients PVP K-30, Compritol^® 888 ATO, and MYRJ^® 59 seem to exercise a protective thermal activity for the prototype.     

Surface sampling capillary electrophoresis–mass spectrometry for a direct chemical characterization of tissue and blood samples

Capillary electrophoresis (CE) is a powerful separation tool for non-targeted analysis of chemically complex samples, such as blood, urine, and tissue. However, traditionally CE requires samples in solution for analysis, which limits information on analyte distribution and heterogeneity in tissue. The recent development of surface sampling CE–mass spectrometry (SS-CE–MS) brings these advantages of CE to solid samples and enables chemical mapping directly from the tissue surface without laborious sample preparation. Here, we describe developments of SS-CE–MS to increase reproducibility and stability for metabolite, lipid, and protein extraction from tissue sections and dried blood spots. Additionally, we report the first electrokinetic sequential sample injection for high throughput analysis. We foresee that the wide molecular coverage from a distinct tissue region in combination with higher throughput will provide novel information on biological function and dysfunction.     

Physical–chemical study of water in contact with a hydrophilic polymer: Nafion

The study detailed in this paper is about the determination of the physical–chemical parameters of water, after keeping it in prolonged contact with the Nafion polymer. The parameters under study are: electrical conductivity, χ (μS cm^?1); heat of mixing with acid (HCl), ΔQ _mix ^HCl (J kg^?1) or basic (NaOH) solutions, ΔQ _mix ^NaOH  (J kg^?1), and pH. χ increases of up to two orders of magnitude, ΔQ _mix ^NaOH  (J kg^?1) is exothermic and increases as the electrical conductivity increases, with a roughly linear trend, up to one order of magnitude. The analogous ΔQ _mix ^HCl  (J kg^?1), on the contrary, is found to be null. The pH is quite acid and shows a very good linear correlation with log χ. The linear correlations hint at a single cause for the variation of the three very different physical–chemical parameters. This complex and hard to rationalize phenomenology, finds a good theoretical support in the work hypothesis of the formation of dissipative structures within the liquid. These are far-from-equilibrium systems outside the paradigm of classical thermodynamics. The work hypothesis of the formation of molecular aggregates of water molecules (dissipative structures, aqueous nanostructures, clusters, coherence domains, etc.) is shared with two other aqueous systems obtained with different preparation protocols, so we briefly recall them here: (1) EDS (extremely diluted solutions): obtained through an iterative process of successive dilutions and agitations. (2) IFW (iteratively filtered water): obtained through an iterative process of successive filtrations through sintered glass filters. (3) INW (iteratively nafionized water): obtained through an iterative process of successive drying and wetting of the Nafion polymer. Each protocol produces water exhibiting its own peculiarities, to the point that they can be considered different, albeit with the common element of a variation of the super-molecular structure of the water solvent. The physical–chemical properties of these perturbed waters cannot be framed by the paradigm of classical thermodynamics, but rather require the use of the thermodynamics of systems far from the equilibrium and of irreversible processes.     

Synthesis and characterization of palladium–tin bicolloids prepared by chemical liquid deposition

Palladium–tin bicolloids have been prepared by chemical liquid deposition. The metals were cocondensed at 77 K with ethanol, 2-propanol, 2-methoxyethanol, 2-butanone and acetone. The distribution of particle sizes was determined by transmission electron microscopy of the stables dispersions. The sizes ranged from 3.8 nm for 2-methoxyethanol to 8.3 nm for acetone colloids. Electrophoretic measurements such as colloid charge and zeta potential were achieved. lt was found that the colloids possess electrical charge; therefore, it is postulated that their stability is by simple solvatation. The colloids showed stability over 1 week at room temperature. The zeta-potential values are in agreement with the stability and electrophoretic mobility. The highest zeta potential was obtained for PdSn–2-methoxyethanol colloids with 379 mV and the lowest for 2-butanone with 114 mV. The colloids exhibit absorption bands in the UV region. In the visible region no plasma absorption was found. Active solids obtained by evaporation of the solvent contain a certain amount of the solvent incorporated, and owing to their reactivity they produce a mixture of tin oxide with palladium and tin. The presence of solvents can be observed by Fourier transform IR incorporation in the finely divided solids. Characteristic bands for each solvent were measured. By means of thermogravimetric analysis and differential scanning calorimetry the thermal stability of the solids and the transition heat give us the carbonaceous residues in the films. The elemental analysis of the powders was carried out.     

Validation of the RP–HPLC method for analysis of hydrochlorothiazide and captopril in tablets

A rapid and sensitive reverse-phase high performance liquid chromatography (RP–HPLC) method with ultra-violet (UV) detection for a routine control of hydrochlorothiazide and captopril in tablets was developed. The chromatographic system Hewlet Packard 1100 consisted of a HP 1100 pump, HP 1100 UV–VIS detector and HP ChemStation integrator. The samples were introduced through a Rheodyne injector valve with a 20-L sample loop. The isocratic system consisted of a Beckman Ultrasphere ODS 4.6 mm x 15 cm, 5-m-particle column and a mobile phase containing methanol/water (45:55 v/v). The pH of the mobile phase was adjusted to 3.8 with 85% ortophosphoric acid. Quantitation was accomplished using the internal standard method. At the selected conditions, the other excipients of the tablets did not interfere in the assay of active substances. The developed RP–HPLC method was validated, so linearity, precision, accuracy, robustness, limit of quantitation and limit of detection were investigated. For the robustness test, three factors were considered: the composition of the mobile phase , the pH of the mobile phase, and temperature. With the aid of response surface metodology (RSM), it was possible to precisely define the robustness of the method.     

Physical–chemical and catalytic properties of deposited MoO3 and V2O5

The deposition of molybdenum and vanadium oxides onto fumed silica, titania, and alumina as supports through dry milling has been carried out. The structure of prepared compositions has been investigated by means of XRD, DTA?CTG, FTIR, and UV?CVis spectroscopy, nitrogen adsorption. The deposited crystal phases are sufficiently uniformly distributed on support surface. The supported oxides are subjected to dispersion in process of milling to the state of oligomeric or isolated species. Milled bulk and deposited MoO₃ (first of all, on alumina) possesses improved catalytic performance in process of epoxidation of 1-octene. Vanadium pentoxide also has higher activity in this process.     

Application of TA–MS combined with PulseTA for characterization of materials

The thermal behavior of the anticancer drug-irinotecan was measured by Thermogravimetry–Differential thermal analysis (TG–DTA) to explore the application of TG–DTA in nanomedicine firstly. The TG–DTA result showed that the irinotecan was oxidized completely before 700 °C. When irinotecan was loaded onto nanosized mesoporous silica spheres, the loading capacity for irinotecan measured by TG–DTA was about 9.11% in the irinotecan/mesoporous SiO₂ composite, similar to the typical UV–Vis spectra results (10.5%), which showed that TG–DTA characterization provided an alternative method to determine the drug loading amount on inorganic carriers. Secondly, Thermogravimetry–Differential scanning calorimetry–Mass Spectrometry coupling techniques (TG–DSC–MS) were used to characterize the hydrogen adsorption temperature and capacity of TiCr_1.2 (V-Fe)_0.6 alloy. The MS result showed that the released region of hydrogen was 250–500 °C, which was consistent with the TG–DSC results. Lastly, TA–MS combined with pulse thermal analysis (PulseTA) were used for a simultaneous characterizing study in the changes of mass, determination and quantitative calibration of the evolved nitrogen formed during the thermal decomposition of the InN powder. The results showed that relative error of this method between measured value and theoretical value was 2.67% for the quantitative calibration of evolved N₂. It shows that TA–MS combined with PulseTA techniques offer a good tool for the quantification of the evolved nitrogen in the InN powder.     

Optical spectroscopy methods for the characterization of sol–gel materials

Journal of Sol-Gel Science and Technology - In this paper, structural, optical, and electrical features of undoped and copper-incorporated nickel oxide (Cu/NiO) films with different mole ratios...     

Synthesis and characterization of mesoporous Mn–Ni oxides for supercapacitors

Mesoporous Mn–Ni oxides with the chemical compositions of Mn_1-x Ni _x O _δ (x = 0, 0.2, and 0.4) were prepared by a solid-state reaction route, using manganese sulfate, nickel chloride, and potassium hydroxide as starting materials. The obtained Mn–Ni oxides, mainly consisting of the phases of α- and γ-MnO₂, presented irregular mesoporous agglomerates built from ultra-fine particles. Specific surface area of Mn_1–x Ni _x O _δ was 42.8, 59.6, and 84.5 m² g⁻¹ for x = 0, 0.2, and 0.4, respectively. Electrochemical properties were investigated by cyclic voltammetry and galvanostatic charge/discharge in 6 mol L⁻¹ KOH electrolyte. Specific capacitances of Mn_1-x Ni _x O _δ were 343, 528, and 411 F g⁻¹ at a scan rate of 2 mV s⁻¹ for x = 0, 0.2, and 0.4, respectively, and decreased to 157, 183, and 130 F g⁻¹ with increasing scan rate to 100 mV s⁻¹, respectively. After 500 cycles at a current density of 1.24 A g⁻¹, the symmetrical Mn_1–x Ni _x O _δ capacitors delivered specific capacitances of 160, 250, and 132 F g⁻¹ for x = 0, 0.2, and 0.4, respectively, retaining about 82%, 89%, and 75% of their respective initial capacitances. The Mn_0.8Ni_0.2O _δ material showed better supercapacitive performance, which was promising for supercapacitor applications.     

Thermal,chemical and antimicrobial characterization of bioactive titania synthesized by sol–gel method

Journal of Thermal Analysis and Calorimetry - Chemical stability, anticorrosive properties and photocatalytic activity of titanium dioxide (TiO2) are among the most important characteristics for...     

Structural characterization and cytotoxicity studies of ruthenium(II)–dmso–chloro complexes of chalcone and flavone derivatives

A synthetic precursor cis-[Ru^IICl₂(dmso)₄] is complexed separately with 3-(4-benzyloxyphenyl)-1-(2-hydroxylphenyl)-prop-2-en-1-one (L¹H) and 2-(4-benzyloxyphenyl)-3hydroxy-chromen-4-one (L²H). The resulting complexes are assigned the composition fac-[RuCl(S-dmso)₃(L¹)] 1 and fac-[RuCl(S-dmso)₃(L²)] 2 using elemental analyses, FAB mass data and spectroscopic (IR, ¹H NMR, UV–Vis, emission) spectral properties. The X-ray diffraction analysis shows that complexes self-associate through non-covalent interactions and provide 1D and 2D supramolecular structures. These complexes are assayed for their cytotoxicity studies on Dalton Lymphoma cell lines.