Monomer-on-monomer (MoM) Mitsunobu reaction: facile purification utilizing surface-initiated sequestration

A monomer-on-monomer (MoM) Mitsunobu reaction utilizing norbornenyl-tagged (Nb-tagged) reagents is reported, whereby purification was rapidly achieved by employing ring-opening metathesis polymerization, which was initiated by any of three methods utilizing Grubbs catalyst: (i) free catalyst in solution, (ii) surface-initiated catalyst-armed silica, or (iii) surface-initiated catalyst-armed Co/C magnetic nanoparticles.     

Synthesis of epoxybenzo[d]isothiazole 1,1-dioxides via a reductive-Heck, metathesis-sequestration protocol

An atom-economical purification protocol, using solution phase processing via ring-opening metathesis polymerization (ROMP) has been developed for the synthesis of tricyclic sultams. This chromatography-free method allows for convenient isolation of reductive-Heck products and reclamation of excess starting material via sequestration involving metathesis catalysts and a catalyst-armed Si-surface.     

Synthesis of polymer dielectric layers for organic thin film transistors via surface-initiated ring-opening metathesis polymerization

The use of surface-initiated ring-opening metathesis polymerization (SI-ROMP) for producing polymer dielectric layers is reported. Surface tethering of the catalyst to Au or Si/SiO2 surfaces is accomplished via self-assembled monolayers of thiols or silanes containing reactive olefins. Subsequent SI-ROMP of norbornene can be conducted under mild conditions. Pentacene semiconducting layers and gold drain/source electrodes are deposited over these polymer dielectric films. The resulting field effect transistors display promising device characteristics, demonstrating for the first time that SI-ROMP can be used in the construction of organic thin-film electronic devices.     

Surface-initiated, ring-opening metathesis polymerization: formation of diblock copolymer brushes and solvent-dependent morphological changes

In this article, we report the formation of diblock copolymer brushes on a gold surface by surface-initiated, ring-opening metathesis polymerization (SI-ROMP) with the newly developed ruthenium catalyst [(H2IMes)(3-Br-py)2(Cl)2Ru=CHPh]. Taking advantage of the highly improved activity of the ruthenium catalyst and the rapid initiation step of ROMP, we successfully formed thin films of well-defined block copolymers with 5-norbornene-2-endo,3-endo-dimethanol and norbornene carboxylic acid methyl esters (44:56 endo/exo). The catalyst was found to be active enough to polymerize endo isomers of norbonene derivatives from the surface as well as to form diblock copolymer brushes. SI-ROMP of diblock copolymers from the surface was confirmed by ellipsometry, infrared spectroscopy, and X-ray photoelectron spectroscopy. After the formation, the polymer-grafted substrates were immersed in various solvents, and the selective swelling characteristics of polymer brushes were investigated by atomic force microscopy.     

Quantitative determination of the chemical composition of silica-poly(norbornene) nanocomposites

Nanoparticle hybrid materials consisting of a silica core surrounded by a poly(norbornene) brush have been prepared by ring opening metathesis polymerization (ROMP). A quantitative determination of each stage of composite formation has been accomplished, including a determination of the density of surface-bound functional groups, catalyst molecules, and polymer chains. This analysis has enabled the determination of the reaction efficiency between the catalyst and the surface-bound functional groups as well as the determination of the fraction of metal-mediating species that initiate a polymer chain. Control of the chain density was demonstrated by two methods: the use of controlled reaction times between the catalyst and the surface, and the variation of the surface functional group density. Polymer chain densities resulting from composites prepared with different tether structures will also be reported. The resulting brush densities were found to span a wide range, including those previously reported for polymer layers formed by adsorption, grafting of preformed polymer chains, and surface-initiated polymerization (SIP).     

Alkene metathesis: the search for better catalysts

Alkene metathesis catalyst development has made significant progress over recent years. Research in metathesis catalyst design has endeavoured to tackle three key issues: those of (i) catalyst efficiency and activity, (ii) substrate scope and selectivity--particularly stereoselective metathesis reactions--and (iii) the minimization of metal impurities and catalyst recycling. This article describes a brief history of metathesis catalyst development, followed by a survey of more recent research, with a particular emphasis on ruthenium catalysts.     

Growth and structure of surface-initiated poly(n-alkylnorbornene) films

We report the surface-initiated growth of poly(alkylnorbornene) films via ring-opening metathesis polymerization (ROMP). The films are grown by exposure of a vinyl-terminated self-assembled monolayer (SAM) on gold to Grubbs first-generation catalyst and the subsequent exposure to an alkylnorbornene monomer. We investigate the influence of alkyl side chains on the structure, barrier, surface properties, and the growth kinetics of surface-initiated ROMP-type poly(norbornene) films. Rate constants for film growth are estimated for the comparison of monomer reactivity. The rate constant for film growth decreases by 3 orders of magnitude from norbornene to decylnorbornene, indicating a strong effect of chain length on initiation and/or propagation rates. Reflectance-absorption infrared spectroscopy is used to show the molecular level packing within the poly(alkylnorbornene) films is disrupted by the alkyl side chains. Tapping-mode atomic force microscopy is used to show that norbornene, butylnorbornene, and hexylnorbornene polymerize from the surface to form dense coatings, whereas decylnorbornene polymerizes to form isolated polymer clusters. The methyl terminus of the alkyl side chains increases the hydrophobicity of the poly(alkylnorbornene) films (thetaA(H2O) = 109-114 degrees) beyond that of a typical poly(norbornene) film (thetaA(H2O) approximately 106 degrees). The additional hydrophobicity throughout the film correlates with superior resistances against redox probes (Rf approximately 105 Omega.cm2) for poly(hexylnorbornene) when compared to polynorbornene (Rf approximately 104 Omega.cm2). The resistance of the poly(decylnorbornene) film (Rf approximately 102 Omega.cm2) is consistent with its nonuniform, cluster-like morphology.     

Surface grafting of electrochemically crosslinked poly(3,4-ethylenedioxythiophene) (PEDOT) brushes via surface-initiated ring-opening metathesis polymerization

Herein we demonstrated the preparation of 3,4-ethylenedioxythiophene (EDOT) containing polynorbornylene brushes on Au surfaces via surface-initiated ring-opening metathesis polymerization (SI-ROMP). Using solid-state oxidative crosslinking technique, these polymer brushes were electrochemically converted to conjugated polymer networks. Grazing-angle FTIR spectra of polymer brushes clearly showed the characteristic vibrations of EDOT and norbornylene groups. Furthermore, densely covered Au substrates with polynorbornylene brushes were characterized by using scanning electron microscopy and atomic force microscopy.     

A neutral, water-soluble olefin metathesis catalyst based on an N-heterocyclic carbene ligand

A water-soluble ruthenium-based olefin metathesis catalyst supported by a poly(ethylene glycol) conjugated N-heterocyclic carbene ligand is reported. The catalyst displays greater activity in aqueous ring-opening metathesis polymerization (ROMP) reactions than previously reported water-soluble metathesis catalysts.     

Highly active water-soluble olefin metathesis catalyst

A novel water-soluble ruthenium olefin metathesis catalyst supported by a poly(ethylene glycol) conjugated saturated 1,3-dimesityl-4,5-dihydroimidazol-2-ylidene ligand is reported. The catalyst displays improved activity in ring-opening metathesis polymerization, ring-closing metathesis, and cross-metathesis reactions in aqueous media.     

High-load, hybrid Si-ROMP reagents

The combination of norbornenyl-tagged (Nb-tagged) silica particles and functionalized Nb-tagged monomers for the generation of hybrid Si-ROMP reagents and scavengers is reported. Specifically Si-ROMP-derived bis-acid chloride, dichlorotriazine, and triphenylphosphine scavenger/reagents have been grafted from the surface of silica particles utilizing surface-initiated, ring-opening metathesis polymerization (ROMP). These hybrid polymeric materials combine the physical properties of current immobilized silica reagents and represent a key advancement in load by merging the inherent tunable properties of the ROMP-derived oligomers with silica supports for application in a parallel synthesis.     

锌卟啉修饰的双核钌卡宾烯烃复分解催化剂的合成及催化性能检测

为了得到稳定性更好、活性更高的烯烃复分解催化剂,本文采用有机合成的方法,以钌卡宾烯烃复分解催化剂为主体,用锌卟啉进行修饰,得到锌卟啉修饰的Grubbs-Hoveyda型双核钌卡宾烯烃复分解反应催化剂,产物结构使用核磁共振方法进行表征。 用0.1%化学计量催化剂催化几种代表性底物闭环复分解(RCM)反应产率能达到95%,对于特定的交叉烯烃复分解反应(CM),延长反应时间也能得到93%的较高产率。 研究结果为Grubbs-Hoveyda催化剂的修饰提供了新方法和理论依据。     

The activity of covalently immobilized Grubbs–Hoveyda type catalyst is highly dependent on the nature of the support material

A Hoveyda-type catalyst for olefin metathesis was synthesized and covalently attached via an amide bond to four different solid supports. One of these supports was a home-made hybrid silica support, where an ultra-thin copolymer of poly(styrene) and poly(acrylamide) was grafted on. The three other supports were commercially available, namely HypoGel 400, PEGA and Trisoperl. It was demonstrated that the catalysts were active in ring closing metathesis (RCM) reactions as well as in cross metathesis (CM) and ring opening metathesis (ROM) reactions, but the activity of the catalyst was highly dependent on the nature of the support.     

Mechanochemical Immobilisation of Metathesis Catalysts in a Metal–Organic Framework

A simple, one‐step mechanochemical procedure for immobilisation of homogeneous metathesis catalysts in metal–organic frameworks was developed. Grinding MIL‐101‐NH₂(Al) with a Hoveyda–Grubbs second‐generation catalyst resulted in a heterogeneous catalyst that is active for metathesis and one of the most stable immobilised metathesis catalysts. During the mechanochemical immobilisation the MIL‐101‐NH₂(Al) structure was partially converted to MIL‐53‐NH₂(Al). The Hoveyda–Grubbs catalyst entrapped in MIL‐101‐NH₂(Al) is responsible for the observed catalytic activity. The developed synthetic procedure was also successful for the immobilisation of a Zhan catalyst.     

Reaction pathways leading to arylene ethynylene macrocycles via alkyne metathesis

Mechanistic studies on the direct formation of arylene ethynylene macrocycles via alkyne metathesis catalyzed by a molybdenum complex are reported. Gel permeation chromatography (GPC) and matrix-assisted laser desorption ionization (MALDI) mass spectrometry on the products from metathesis of monomer 1 show the initial formation of linear oligomers and large macrocycles (n > 6), followed by their transformation into the thermodynamically most stable product distribution-mainly the cyclic hexamer. Variable temperature and scrambling experiments reveal the reversibility of macrocycle formation. Nearly identical product distributions are observed from the cross metathesis of hexacycle 2 with diphenylacetylene and from the metathesis of bis(phenylethynyl) substituted monomer 4, demonstrating that macrocycle formation is thermodynamically rather than kinetically controlled. The metathesis byproduct, 3-hexyne, is shown to inhibit the catalyst. It is suggested that the relative metathesis rates of dialkylalkynes versus diarylalkynes trap the catalyst in a nonproductive manifold, rendering it unavailable for the productive metathesis of aryl alkylalkyne substrates. This finding indicates that dialkyl-substituted alkyne byproducts should be avoided (or efficiently removed) if the metatheses of aryl substrates, especially those with electron-withdrawing groups, are to proceed to high conversion.     

Synthetic applications with use of a silica-supported alkyne metathesis catalyst

A highly active and durable fumed silica-supported heterogeneous molybdenum(VI) catalyst was applied to ring closing alkyne metathesis and cyclooligomerization reactions to give high yields of metathesis products near room temperature conditions.     

Activity and stereoselectivity of Ru-based catalyst bearing a fluorinated imidazolinium ligand

Grubbs II generation catalyst (3), bearing a fluorinated imidazolinium ligand, was investigated in cross metathesis (CM), ring closing metathesis (RCM) and ring opening polymerization metathesis (ROMP) for a variety of substrates. Kinetic studies showed reduced stability of the catalyst in methylene chloride following the first 15 minutes of reaction preventing a higher efficiency despite the very high activity. Beneficial solvent effects on the catalyst stability were observed by performing RCM in C₆F₆.      

Ring-closing olefin metathesis in the aqueous phase of amphiphilic conetworks consisting of fluorophilic and hydrophilic compartments

A Grubbs-Hoveyda-Type metathesis catalyst bearing a tris(perfluoroalkyl)silyl tag was immobilized in the fluorophilic phase of amphiphilic conetworks (APCNs). This catalytic system was applied to ring-closing metathesis (RCM) reactions in aqueous media. Different substrates were evaluated and with 10 mol% of catalyst at 60 °C good conversions were observed. Reuse of the catalytic system was possible, but resulted generally in lower conversions.     

Electrochemically reduced tungsten‐based active species as catalysts for cross‐metathesis reactions: cross‐metathesis of non‐functionalized olefins

The electrochemical reduction of WCl₆ results in the formation of an active olefin (alkene) metathesis catalyst. The application of the WCl₆–e^?–Al–CH₂Cl₂ catalyst system to cross‐metathesis reactions of non‐functionalized acyclic olefins is reported. Undesirable reactions, such as double‐bond shift isomerization and subsequent metathesis, were not observed in these reactions. Cross‐metathesis of 7‐tetradecene with an equimolar amount of 4‐octene generated the desired cross‐product, 4‐undecene, in good yield. The reaction of 7‐tetradecene with 2‐octene, catalyzed by electrochemically reduced tungsten hexachloride, resulted in both self‐ and cross‐metathesis products. The cross‐metathesis products, 2‐nonene and 6‐tridecene, were formed in larger amounts than the self‐metathesis products of 2‐octene. The optimum catalyst/olefin ratio and reaction time were found to be 1 : 60 and 24 h, respectively. The cross‐metathesis of symmetrical olefins with α‐olefins was also studied under the predetermined conditions. Copyright © 2003 John Wiley & Sons, Ltd.     

关环复分解反应(RCM)及其催化剂研究进展

综述了近年来关环复分解 (RCM )反应及其催化剂的研究进展 ,对RCM反应发展以来被广泛应用的催化剂 ,如Schrock催化剂和Grubbs催化剂等进行了归纳和总结 ,讨论了RCM反应在全合成中的应用