Scope and limitations of the Pd/BINAP-catalyzed amination of aryl bromides

Mixtures of Pd(2)(dba)(3) or Pd(OAc)(2) and BINAP catalyze the cross-coupling of amines with a variety of aryl bromides. Primary amines are arylated in high yield, and certain classes of secondary amines are also effectively transformed. The process tolerates the presence of several functional groups including methyl and ethyl esters, enolizable ketones, and nitro groups provided that cesium carbonate is employed as the base. Most reactions proceed to completion with 0.5-1.0 mol % of the palladium catalyst; in some cases, catalyst levels as low as 0.05 mol % Pd may be employed. Reactions are considerably faster if Pd(OAc)(2) is employed as the precatalyst, and the order in which reagents are added to the reaction has a substantial effect on reaction rate. It is likely that the catalytic process proceeds via bis(phosphine)palladium complexes as intermediates. These complexes are less prone to undergo undesirable side reactions which lead to diminished yields or catalyst deactivation than complexes of the corresponding monodentate triarylphosphines.     

Versatile synthesis of meso-aryloxy- and alkoxy-substituted porphyrins via palladium-catalyzed C-O cross-coupling reactions

[reaction: see text] meso-Aryloxy- and alkoxy-substituted porphyrins were conveniently synthesized by direct reactions of meso-halogenated porphyrins with alcohols via palladium-catalyzed C-O cross-coupling reactions. Using a combination of palladium precursor Pd(OAc)(2) or Pd(2)(dba)(3) and phosphine ligand DPEphos or Xantphos allowed both 5-bromo-10,20-diarylporphyrin and 5,15-dibromo-10,20-diarylporphyrin, as well as their zinc complexes, to be effectively coupled with a variety of alcohols to give the corresponding mono- and bis-substituted meso-aryloxy/alkoxyporphyrins in moderate to high yields under mild conditions.     

Efficient palladium-catalyzed homocoupling reaction and Sonogashira cross-coupling reaction of terminal alkynes under aerobic conditions

An efficient method for palladium-catalyzed homocoupling reaction of terminal alkynes in the synthesis of symmetric diynes is presented. The results showed that both Pd(OAc)(2) and CuI played crucial roles in the reaction. In the presence of 2 mol % Pd(OAc)(2), 2 mol % CuI, 3 equiv of Dabco, and air, homocoupling of various terminal alkynes afforded the corresponding symmetrical diynes in moderate to excellent yields, whereas low yields were obtained without either Pd(OAc)(2) or CuI. Moreover, high TONs (turnover numbers; up to 940 000 for the reaction of phenylacetylene) for the homocoupling reaction were observed. Under similar reaction conditions, cross-coupling of 1-iodo-4-nitrobenzene with phenylacetylene was also carried out smoothly in quantitative yield. However, the presence of CuI disfavored the palladium-catalyzed Sonogashira cross-coupling reactions of the less active aryl iodides and bromides. In the presence of 0.01-2 mol % Pd(OAc)(2), a number of aryl iodides and bromides were coupled with terminal alkynes in good to excellent yields. It is noteworthy that this protocol employs mild, efficient, aerobic, copper-free, and ligand-free conditions.     

Drastic effect of bidentate phosphine ligands on Pd-catalyzed hydroarylation of ethyl propiolate: a simple route to arylbutadienes

Palladium complexes with bidentate phosphine ligands, Pd(dppe)(OAc)(2) and Pd(dppm)(OAc)(2), were found to be effective catalysts for reactions of simple arenes with ethyl propiolate, affording arylbutadiene derivatives selectively.     

Efficient route to 1,3-Di-N-imidazolylbenzene. A comparison of monodentate vs bidentate carbenes in Pd-catalyzed cross coupling

A new bis(carbene) ligand architecture has been developed and was evaluated in the Suzuki-Miyaura cross-coupling reaction of various aryl halides with phenylboronic acid. Several new bis(carbene) ligands were tested in different carbene:Pd ratios. Pd(OAc)(2) and Pd(2)(dba)(3) were compared for efficiency as a Pd source. It was found that the Pd(OAc)(2)/bis(carbene) system formed a catalyst for the activation of chlorobenzene. [reaction: see text]     

Dabco as an inexpensive and highly efficient ligand for palladium-catalyzed Suzuki-Miyaura cross-coupling reaction

An inexpensive and highly efficient Pd(OAc)(2)/Dabco catalytic system has been developed for the cross-coupling of aryl halides with arylboronic acids. A combination of Pd(OAc)(2) and Dabco (triethylenediamine) was observed to form an excellent catalyst, which affords high TONs (turnover numbers; TONs up to 950 000 for the reaction of PhI and p-chlorophenylboronic acid) for Suzuki-Miyaura cross-coupling of various aryl iodides and bromides with arylboronic acids. [reaction: see text]     

Oxidative cross-coupling of acrylates with vinyl carboxylates catalyzed by a Pd(OAc)2/HPMoV/O2 system

Oxidative cross-coupling of acrylates with vinyl carboxylates was first successfully achieved by the use of a Pd(OAc)(2)/HPMoV/O(2) system in fair to good yields. For instance, the reaction of n-butyl acrylate with vinyl acetate in the presence of catalytic amounts of Pd(OAc)(2) and H(4)PMo(11)VO(40).nH(2)O under O(2) in acetic acid at 70 degrees C for 12 h afforded the corresponding cross-coupling product, n-butyl 5-(acetoxy)-2,4-pentadienoate, in 70% yield.     

Pd(OAc)(2)-catalyzed oxidative C-H/C-H cross-coupling of electron-deficient polyfluoroarenes with simple arenes

Pd(OAc)(2)-catalyzed intermolecular C-H/C-H cross-coupling reactions between electron-deficient polyfluoroarenes and simple arenes for the synthesis of fluorinated biaryls have been developed. Deuterium-labeling experiments suggested that C-H bond cleavage of the simple arenes rather than the polyfluoroarenes is involved in the rate-limiting step.     

Rate and mechanism of the reaction of alkenes with aryl palladium complexes ligated by a bidentate P,P ligand in Heck reactions

The regioselectivity of the Heck reaction is supposed to be highly affected by the electronic properties of the alkene and the ionic or neutral character of the aryl palladium(II) complexes involved in the reaction with alkenes. In Heck reactions performed in dmf, [Pd(dppp){dppp(O)}Ph](+) (dppp=1,2-bis(diphenylphosphino)propane) is generated in the oxidative addition of PhI with [Pd(0)(dppp)(OAc)](-) formed in situ from Pd(OAc)(2) associated to two equivalents of dppp. [Pd(dppp){dppp(O)}Ph](+) is not very reactive with alkenes (styrene or methyl acrylate); however, it reacts with iodide ions (released in the catalytic reactions) to give [Pd(dppp)IPh] and with acetate ions (used as base) to give [Pd(dppp)(OAc)Ph]. [Pd(dppp)(OAc)Ph] reacts with styrene and methyl acrylate exclusively by an ionic mechanism, that is, via the cationic complex [Pd(dppp)(dmf)Ph](+) formed by dissociation of the acetate ion. The reaction of [Pd(dppp)IPh] is more complex and substrate dependent. It reacts with styrene exclusively by the ionic mechanism via [Pd(dppp)(dmf)Ph](+). [Pd(dppp)IPh] (neutral mechanism) and [Pd(dppp)(dmf)Ph](+) (ionic mechanism) react in parallel with methyl acrylate. [Pd(dppp)(dmf)Ph](+) is more reactive than [Pd(dppp)IPh] but is always generated at lower concentration.     

PEG-400 promoted Pd(OAc)2/DABCO-catalyzed cross-coupling reactions in aqueous media

PEG-400 [poly(ethylene glycol-400)] was found to improve the Pd(OAc)₂/DABCO-catalyzed aqueous Suzuki-Miyaura and Stille cross-coupling reactions. In the presence of Pd(OAc)₂, DABCO, and PEG-400, a variety of aryl halides were coupled with arylboronic acids or organotin compounds efficiently to afford the corresponding cross-coupled products in moderate to excellent yields. The turnover numbers was up to 900,000 for the Suzuki-Miyaura reaction and up to 9800 for the Stille reaction. The catalyst system was also effective for Heck and Sonogashira cross-coupling reactions to some extent.     

Controlled Pd(0)/t-Bu(3)P-Catalyzed Suzuki Cross-Coupling Polymerization of AB-Type Monomers with PhPd(t-Bu(3)P)I or Pd(2)(dba)(3)/t-Bu(3)P/ArI as the Initiator

Controlled Pd(0)/t-Bu(3)P-catalyzed Suzuki cross-coupling polymerizations of AB-type monomers via the chain-growth mechanism with an ArPd(t-Bu(3)P)I complex as the initiator are described. ArPd(t-Bu(3)P)I complexes, either prepurified or generated in situ from Pd(2)(dba)(3)/t-Bu(3)P/ArI (dba = dibenzylideneacetone) without separation/purification, were found to be efficient initiators in general for the controlled Suzuki cross-coupling polymerization, with narrow polydispersity indexes (PDIs) of 1.13-1.35 being observed. The Pd(2)(dba)(3)/t-Bu(3)P/p-BrC(6)H(4)I combination was identified as a highly robust initiator system, with PDIs of ≤1.20 in general and as low as 1.13 being obtained. Higher number-average molecular weights (M(n)) were achieved without a significant increase in the PDI (from 1.14 for a polymer with a M(n) = 9500 to 1.20 for a polymer with M(n) = 31?400) by using a smaller amount of the Pd(2)(dba)(3)/t-Bu(3)P/p-BrC(6)H(4)I initiator in the polymerization.     

N-heterocyclic carbene tethered amido complexes of palladium and platinum

With a view to applications in bifunctional catalysis, a modular cross-coupling strategy has been used to prepare amine bis(imidazolium) salts (3a and 3b) and an amine mono(imidazolium) salt (6) as precursors to chelating amido-NHC ligands. Treating the pro-ligands 3 with 3 equivalents of the bulky base KHMDS and Pd(OAc)(2) or PtCl(2)(COD) gave the four amido bis(N-heterocyclic carbene) pincer complexes [CNC-R]M-I [M = Pd (7) or Pt (8); R = i-Pr (a) or n-Bu (b)], including the first examples of platinum complexes of a CNC ligand. The reaction of 7a with AgOTf in pyridine gave the cationic complex {[CNC-i-Pr]Pd-py}OTf (9a). Heating a mixture of amine mono(imidazolium) salt 6 with PdCl(2) or K(2)PtCl(4), K(2)CO(3) and KI in pyridine at 100 °C gave the complexes [C,NH]MI(2)py [M = Pd (10) or Pt (11)], in which the amine arm of the NHC ligand is not deprotonated and does not coordinate to the metal. For a solution of 10 in 1,4-dioxane, deprotonation of the amine occurred in a biphasic reaction with aqueous KOH at 40 °C, giving the dimeric amido complex {[C,N]Pd(μ-OH)}(2) (12). The more inert Pt analogue 11 was unreactive under the same conditions. Solid-state structures of the complexes 7a, 7b, 9a, 10, 11 and 12 have been determined by single crystal X-ray diffraction.     

General synthesis of meso-amidoporphyrins via palladium-catalyzed amidation

A series of meso-amidoporphyrins were facilely synthesized by direct reactions of meso-brominated porphyrins with amides via palladium-catalyzed amidation reaction. Using a combination of palladium precursor Pd(OAc)(2) or Pd(2)(dba)(3) and phosphine ligand Xantphos, both 5-bromo-10,20-diphenylporphyrin and 5,15-dibromo-10,20-diphenylporphyrin, as well as their zinc complexes, can be effectively coupled with a wide variety of amides to give the corresponding mono- and bis-substituted meso-amidoporphyrins in high yields under mild conditions. [reaction: see text]     

A mild and efficient method for the stereoselective formation of C-O bonds: palladium-catalyzed allylic etherification using zinc(II) alkoxides

[reaction: see text] A highly chemo- and stereoselective palladium-catalyzed allylic etherification reaction is described. The use of zinc(II) alkoxides proved effective in promoting the addition of the oxygen nucleophile derived from aliphatic alcohols to eta(3)-allylpalladium complexes. Using diethylzinc (0.5 equiv), 5 mol % of Pd(OAc)(2), and 7.5 mol % of 2-di(tert-butyl)phosphinobiphenyl in THF, the cross-coupling reaction between various aliphatic alcohols and allylic acetates proceeded at ambient temperature to furnish allylic ethers with high stereoselectivity.     

New palladium-catalyzed cross-coupling routes to carbon functionalized metallatricarbadecaboranes

A general method for the synthesis of cage-carbon-functionalized cyclopentadienyl iron and cyclopentadienyl ruthenium tricarbadecaboranyl complexes has been developed that employs palladium-catalyzed Sonogashira, Heck, and Stille cross-coupling reactions directed at a cage-carbon haloaryl substituent. The key Li(+)[6-(p-XC(6)H(4))-nido-5,6,9-C(3)B(7)H(9)(-)] (X = I (1), Br (2), Cl (3)) haloaryl-tricarbadecaboranyl anionic ligands were synthesized in high yields via the reaction of the arachno-4,6-C(2)B(7)H(12)(-) anion with the corresponding p-halobenzonitriles (p-XC(6)H(4)-CN). The reactions of the salts 1-3 with (η(5)-C(5)H(5))Fe(CO)(2)I and (η(5)-C(5)H(5))Ru(CH(3)CN)(3)PF(6) were then used to produce the haloaryl complexes 1-(η(5)-C(5)H(5))-2-(p-XC(6)H(4))-closo-1,2,3,4-MC(3)B(7)H(9) (M = Fe, X = I (4), Br (5), Cl (6) and M = Ru, X = I (7), Br (8), Cl (9)). The sonication-promoted Sonogashira coupling reactions of 4 with terminal alkynes catalyzed by Pd(dppf)(2)Cl(2)/CuI yielded the alkynyl-linked derivatives 1-(η(5)-C(5)H(5))-2-p-RC(6)H(4)-closo-1,2,3,4-FeC(3)B(7)H(9) (R = (PhC≡C)- (10), (CH(3)CH(2)C(O)OCH(2)C≡C)- (11), ((η(5)-C(5)H(5))Fe(η(5)-C(5)H(4)C≡C))- (12)). Heck reactions of 4 with terminal alkenes catalyzed by Pd(OAc)(2) yielded the alkene-functionalized products 1-(η(5)-C(5)H(5))-2-p-RC(6)H(4)-closo-1,2,3,4-FeC(3)B(7)H(9) (R = (PhCH(2)CH═CH)- (13), (CH(3)(CH(2))(2)CH═CH)- (14)), while the Stille cross-coupling reactions of 4 with organotin compounds catalyzed by Pd(PPh(3))(2)Cl(2) afforded the complexes 1-(η(5)-C(5)H(5))-2-p-RC(6)H(4)-closo-1,2,3,4-FeC(3)B(7)H(9) (R = Ph- (15), (CH(2)═CH)- (16), (CH(2)═CHCH(2))- (17)). These reactions thus provide facile and systematic access to a wide variety of new types of functionalized metallatricarbadecaboranyl complexes with substituents needed for potential metallocene-like biomedical and/or optoelectronic applications.     

Palladium(II) complexes of bowls, pinwheels, cages, and N,C,N-pincers of starburst ligands 1,3,5-Tris(di-2-pyridylamino)benzene and 2,4,6-Tris(di-2-pyridylamino)-1,3,5-triazene

The reactions of Pd(II) ions with starburst ligands 1,3,5-tris(di-2-pyridylamino)benzene (tdab) and 2,4,6-tris(di-2-pyridylamino)-1,3,5-triazene (tdat) have been investigated. Complexes with the Pd:tdab (or tdat) ratio being 1:1 and 3:1 have been isolated and characterized. The structures of five new Pd(II) complexes containing the starburst ligands have been determined by X-ray diffraction analyses, which include chelate compounds [PdCl(2)(tdab)], 1, [(PdCl(2))(3)(tdab)], 2, [(Pd(OAc)(2))(3)(tdab)], 4, and [(Pd(OAc)(2))(3)(tdat)], 5, and a cyclometalated compound [Pd(OAc)(NCN-tdab)], 3. The Pd(II) ion in the 1:1 compound 1 is chelated by two pyridyl groups. Similarly, each Pd(II) center in the 3:1 compounds 2, 4, and 5 is chelated by two pyridyl groups. However, these three compounds display distinct structural features: 2 adopts a "bowl-shaped" structure, 4 has a "pinwheel"-like structure, and 5 has a "up-and-down" structure. Compounds 4 and 5 were examined in solution by variable-temperature (1)H NMR, which revealed that both compounds retain the "pinwheel" and the "up-and-down" structure, respectively. The observed structural preference by 4 and 5 is attributed to both electronic and steric factors.     

Connecting binuclear Pd(III) and mononuclear Pd(IV) chemistry by Pd-Pd bond cleavage

Oxidation of binuclear Pd(II) complexes with PhICl(2) or PhI(OAc)(2) has previously been shown to afford binuclear Pd(III) complexes featuring a Pd-Pd bond. In contrast, oxidation of binuclear Pd(II) complexes with electrophilic trifluoromethylating ("CF(3)(+)") reagents has been reported to afford mononuclear Pd(IV) complexes. Herein, we report experimental and computational studies of the oxidation of a binuclear Pd(II) complex with "CF(3)(+)" reagents. These studies suggest that a mononuclear Pd(IV) complex is generated by an oxidation-fragmentation sequence proceeding via fragmentation of an initially formed, formally binuclear Pd(III), intermediate. The observation that binuclear Pd(III) and mononuclear Pd(IV) complexes are accessible in the same reactions offers an opportunity for understanding the role of nuclearity in both oxidation and subsequent C-X bond-forming reactions.     

Coordination chemistry of silanedithiolato ligands derived from cyclotrisilathiane: synthesis and structures of complexes of iron(II), cobalt(II), palladium(II), copper(I), and silver(I)

The coordination chemistry of chelating silanedithiolato ligands has been investigated on Fe(II), Co(II), Pd(II), Cu(I), and Ag(I). Treatment of M(OAc)(2) (M = Fe, Co, Pd) with cyclotrisilathiane (SSiMe(2))(3) in the presence of Lewis bases resulted in formation of Fe(S(2)SiMe(2))(PMDETA) (1), Fe(S(2)SiMe(2))(Me(3)TACN) (2), Co(S(2)SiMe(2))(PMDETA) (3), and Pd(S(2)SiMe(2))(PEt(3))(2) (4) (PMDETA = N,N,N',N',N' '-pentamethyldiethylenetriamine; Me(3)TACN = 1,4,7-trimethyl-1,4,7-triazacyclononane). The analogous reactions of M(OAc) (M = Cu, Ag) in the presence of PEt(3) gave rise to the dinuclear complexes M(2)[(SSiMe(2))(2)S](PEt(3))(3) [M = Cu (5), Ag (6)]. Complexes were characterized in solution by (1)H, (31)P[(1)H], and (29)Si[(1)H] NMR and in the solid state by single-crystal X-ray diffraction. Mononuclear complexes 1-3 have a four-membered MS(2)Si ring, and these five-coordinate complexes adopt trigonal-bipyramidal (for the PMDETA adducts) or square-pyramidal (for the Me(3)TACN adduct) geometries. In dimer 6, the (SSiMe(2))(2)S(2)(-) silanedithiolato ligand bridges two metal centers, one of which is three-coordinate and the other four-coordinate. The chelating effect of silanedithiolato ligands leads to an increase in the stability of silylated thiolato complexes.     

Pd(II) complexes of N,S-heterocyclic carbenes with pendant and coordinated allyl function and their Suzuki coupling activities

3-(2-Propenyl)benzothiazolium bromide () provides a direct and simple entry to Pd(ii) complexes with N,S-heterocyclic carbene (NSHC) ligands functionalized with an allyl pendant with hemilabile potential. Addition of salt to Pd(OAc)(2) eliminates HOAc and affords the bis(carbene) complexes cis-[PdBr(2)(NHSC)(2)] (cis-, NSHC = 3-(2-propenyl)benzothiazolin-2-ylidene) and trans-[PdBr(2)(NHSC)(2)] (trans-) along with the monocarbene complexes [PdBr(2)(NSHC)] () and trans-[PdBr(2)(benzothiazole-kappaN)(NSHC)] () as minor side products. Salt-metathesis of cis- with AgO(2)CCF(3) yields the mixed dicarboxylato-bis(carbene) complex cis-[Pd(O(2)CCF(3))(2)(NSHC)(2)] (). Complexes cis-, trans- and were characterized by multinuclear NMR spectroscopies, ESI mass spectrometry and elemental analysis. The molecular structures of complexes cis-, and have been determined by X-ray single crystal diffraction. Complexes cis- and as well as an in situ mixture of Pd(OAc)(2) and salt are active toward Suzuki-Miyaura coupling of aryl bromides and activated aryl chlorides giving good conversions.     

Coordination properties of 2,5-dimesitylpyridine: an encumbering and versatile ligand for transition-metal chemistry

To overcome the unfavorable steric pressures associated with 2,6-disubstitution in encumbering pyridine ligands, the coordination chemistry of a 2,5-disubstituted variant, namely, 2,5-dimesitylpyridine (2,5-Mes(2)py), is reported. This diaryl pyridine shows good binding ability to a range of transition-metal fragments with varying formal oxidation states and coligands. Treatment of 2.0 equiv of 2,5-Mes(2)py with monovalent Cu and Ag triflate sources generates complexes of the type [M(2,5-Mes(2)py)(2)]OTf (M = Cu, Ag; OTf = OSO(2)CF(3)), which feature long M-OTf distances and a substrate-accessible primary coordination sphere. Combination of 2,5-Mes(2)py with Cu(OTf)(2) and Pd(OAc)(2) produces four-coordinate complexes featuring cis- and trans-2,5-Mes(2)py orientations, respectively. The four-coordinate palladium complex Pd(OAc)(2)(2,5-Mes(2)py)(2) is found to resist py-ligand dissociation at room temperature in solution, but functions as a precatalyst for the aerobic C-H bond olefination of benzene at elevated temperatures. This C-H bond activation chemistry is compared with a similar Pd-based system featuring 2,6-disubstituted pyridines. 2,5-Mes(2)py also readily supports mono- and dinuclear divalent Co complexes, and the solution-phase equilibria between such species are detailed. The coordination studies presented highlight the potential of 2,5-Mes(2)py to function as an encumbering ancillary for the stabilization of low-coordinate complexes and as a supporting ligand for metal-mediated transformations.