Evaluation of a valveless thermal desorption system for organic aerosols and vapors. Transfer lines and preconcentration module

Semivolatile organic compounds (SVOCs) are distributed in the atmosphere between the gas- and aerosol-phases. The low vapor pressures of some SVOCs makes thermal extraction and transfer through gas chromatographic (GC) systems difficult. We evaluated a programmable temperature vaporization (PTV) GC inlet, which served as the preconcentration module, and four open-tubular capillaries (Silcosteel- and Siltek-treated stainless steel, Silcosteel-treated stainless steel coated with 100% dimethylpolysiloxane, and deactivated fused silica) as transfer lines in a valveless, whole-sample analytic system. Thermal extraction of C(9)-C(36)n-alkanes at 300 and 320 degrees C from fused silica and quartz wool in the PTV inlet was equally efficient. Adsorptive losses of C(22)-C(36)n-alkanes to stainless steel surfaces that protruded into the PTV inlet were suspected. Thus, treatment of the outer surfaces of transfer lines is recommended for effective thermal transfer of SVOCs. Transfer efficiencies began to decline after n-C(24), n-C(28), and n-C(30) in Silcosteel-treated stainless steel, deactivated fused silica, and Siltek-treated stainless steel transfer lines, respectively. Thus, quantitative recovery at 320 degrees C of compounds with vapor pressures less than about 3 x 10(-8)Pa is not expected in valveless SVOC thermal desorption systems that use Siltek-treated stainless steel transfer lines and fused silica or quartz wool as preconcentration substrates.     

Surface tensions of linear and branched alkanes from Monte Carlo simulations using the anisotropic united atom model

The anisotropic united atoms (AUA4) model has been used for linear and branched alkanes to predict the surface tension as a function of temperature by Monte Carlo simulations. Simulations are carried out for n-alkanes ( n-C5, n-C6, n-C7, and n-C10) and for two branched C7 isomers (2,3-dimethylpentane and 2,4-dimethylpentane). Different operational expressions of the surface tension using both the thermodynamic and the mechanical definitions have been applied. The simulated surface tensions with the AUA4 model are found to be consistent within both definitions and in good agreement with experiments.     

Temperature-programmed gas chromatography linear retention indices of all C4-C30 monomethylalkanes on methylsilicone OV-1 stationary phase. Contribution towards a better understanding of volatile organic compounds in exhaled breath

Monomethylated alkanes have been proposed to be contained in exhaled breath, their concentration pattern serving for identification of lung carcinoma, breast carcinoma and rejection of foreign tissue after heart transplant rejection. Improving the accuracy of identification for monomethylated alkanes will enhance work on their biochemical background which presently is unknown. The programmed temperature linear retention indices of all 196 C(4)-C(30) monomethylalkanes on OV-1 stationary phase were measured with an average repeatability of +/-0.07 index units (i.u.). The mixture of C(9)-C(30) monomethylalkanes was prepared by methylene insertion reaction to C(8)-C(29)n-alkanes mixture. The preliminary identification of monomethylalkanes was performed on the basis of the dependence of homomorphy factors on the number of carbon atoms of individual homologous series of monomethylalkanes (retention indices extrapolated with s=0.15 i.u.). The prediction of retention of isomers with new position of methyl group beginning at higher carbon atoms number, as well as for second, third, fourth, etc., member of homologous series allowed the dependence H(P)=f(C(n)) for first, second, third, etc., members of beginning homologous of monomethylalkane series (retention indices extrapolated with s=0.17 i.u.). The identification was confirmed by mass spectrometry. All gas chromatographic unseparated monomethylalkane isomers with methyl-group near the middle of molecule carbon chain were resoluted by mass spectrometric deconvolution. Obtained regular dependences H(P)=f(C(n)) allow precise retention prediction of monomethylalkanes C(30).     

Molecular dynamics in n-alkanes: premelting phenomena and rotator phases

Molecular dynamics simulations of the n-alkanes C18H38, C19H40, and C20H42 are reported for temperatures just below the melting point. Besides thermodynamic and average structural data for the ordered phase, we discuss the molecular motions initiating the rotator phases observed in spontaneous phase transitions in isothermal, isostress simulations. The RI phase of C19H40 is initiated by particular cork-screw-like jumps combining a quarter turn about the long molecular axis and a half-chain-period translation along the axis. This motion occurs between the minimum-energy conformation of the ordered crystal and a secondary minimum. Transient analogs of the RI and RII phases of the odd alkanes are found on melting C18H38 and C20H42. Collective motions within lamellae of molecules are prominent in the dynamics.     

Characterization of a lipid-rich fraction synthesized by Streptomyces avermitilis

Isolation of the macrocyclic lactone parasiticide avermectin and other closely related natural products produced by Streptomyces avermitilis also yields a lipid-rich fraction. The latter has been characterized by techniques based on gas-liquid chromatography (GLC) and mass spectrometry (MS). Initial examination of the lipid-rich fraction by direct probe electron-impact (EI) MS and packed-column GLC showed that it consists primarily of a mixture of triglycerides possessing C14-C17 acyl groups. Further examination of this fraction by capillary column GLC-MS demonstrated that it contains low levels of C15-C17 free fatty acids, squalene and diglycerides and, as the major components, at least ten mixed acyl triglycerides (total number of acyl carbon atoms ranging from 43 to 50). Prominent among the triglycerides were a C15-C15-C16 species, a C15-C16-C16 species and a C15-C16-C17 species. Capillary-column GLC and GLC-MS of the fatty acid methyl esters resulting from transesterification demonstrated that the major triglyceride acyl groups are anteiso-C15 (12-methyltetradecanoyl), iso-C16 (14-methylpentadecanoyl), n-C16 (hexa-decanoyl) and anteiso-C17 (14-methylhexadecanoyl). Lower levels of the methyl esters of the following fatty acids were observed: iso-C14 (12-methyltridecanoic), n-C14 (tetradecanoic), iso-C15 (13-methyltetradecanoic), n-C15 (pentadecanoic), iso-C17 (15-methylhexadecanoic) and n-C17 (heptadecanoic). Little evidence was seen for either unsaturated acyl groups or acyl groups of less than 13 or more than 18 carbon atoms. Desorption chemical ionization MS (ammonia reagent gas) analysis confirmed the nature of the lipid-rich fraction, and is an attractive one-step approach for determining the molecular weights and distribution of triglycerides in a mixture.     

Molecular simulation and macroscopic modeling of the diffusion of hydrogen, carbon monoxide and water in heavy n-alkane mixtures

The self-diffusion coefficient of hydrogen (H(2)), carbon monoxide (CO) and water (H(2)O) in n-alkanes was studied by molecular dynamics simulation. Diffusion in a few pure n-alkanes (namely n-C(8), n-C(20), n-C(64) and n-C(96)) was examined. In addition, binary n-C(12)-n-C(96) mixtures with various compositions as well as more realistic five- and six-n-alkane component mixtures were simulated. In all cases, the TraPPE united atom force field was used for the n-alkane molecules. The force field for the mixture of n-alkanes was initially validated against experimental density values and was shown to be accurate. Moreover, macroscopic correlations for predicting diffusion coefficient of H(2), CO and H(2)O in n-alkanes and mixtures of n-alkanes were developed. The functional form of the correlation was based on the rough hard sphere theory (RHS). The correlation was applied to simulation data and an absolute average deviation (AAD) of 5.8% for pure n-alkanes and 3.4% for n-alkane mixtures was obtained. Correlation parameters vary in a systematic way with carbon number and so they can be used to provide predictions in the absence of any experimental or molecular simulation data. Finally, in order to reduce the number of adjustable parameters, for the n-alkane mixtures the "pseudo-carbon number" approach was used. This approach resulted in relatively higher deviation from MD simulation data (AAD of 18.2%); however, it provides a convenient and fast method to predict diffusion coefficients. The correlations developed here are expected to be useful for engineering calculations related to the design of the Gas-to-Liquid process.     

Solvation enthalpies and heat capacities of n-alkanes in four polymer phases by capillary gas chromatography

Molar solvation enthalpy (deltasol H(o)298) and molar heat capacity changes (deltasol C(o)p) were determined by gas chromatography for the C6-C12 n-alkanes on four preferred stationary phases (100% polydimethyl siloxane, 50% diphenyl-50% dimethyl polysiloxane, 50% trifluoropropyl methylsiloxane, and polyethylene glycol) in commercial FSOT. Statistical evaluation indicated the temperature independence of deltasol C(o)p in the range 303-393 K. Deltasol H(o)298 depends linearly on the number of carbon atoms in the n-alkanes, but no linearity could be established for deltasol C(o)p of higher homologues on polar columns, which may be due to a more ordered state on the liquid phase. The homologues for which a linear temperature dependence exists demonstrated that deltasol C(o)p is related linearly to the van der Waals volume and the temperature derivative of the density of the stationary phase. The results are consistent with a simple physical explanation at the molecular level.     

A method of calculating the second dimension retention index in comprehensive two-dimensional gas chromatography time-of-flight mass spectrometry

A method was developed to calculate the second dimension retention index of comprehensive two-dimensional gas chromatography time-of-flight mass spectrometry (GC×GC/TOF-MS) data using n-alkanes as reference compounds. The retention times of the C(7)-C(31) alkanes acquired during 24 isothermal experiments cover the 0-6s retention time area in the second dimension retention time space, which makes it possible to calculate the retention indices of target compounds from the corresponding retention time values without the extension of the retention space of the reference compounds. An empirical function was proposed to show the relationship among the second dimension retention time, the temperature of the second dimension column, and the carbon number of the n-alkanes. The proposed function is able to extend the second dimension retention time beyond the reference n-alkanes by increasing the carbon number. The extension of carbon numbers in reference n-alkanes up to two more carbon atoms introduces <10 retention index units (iu) of deviation. The effectiveness of using the proposed method was demonstrated by analyzing a mixture of compound standards in temperature programmed experiments using 6 different initial column temperatures. The standard deviation of the calculated retention index values of the compound standards fluctuated from 1 to 12 iu with a mean standard deviation of 5 iu.     

有机膦、胂、(月弟)合钨、钼聚多酸盐的研究 Ⅳ.烷基膦合钼聚多酸盐的制备

本文是作者在合成了一系列有机胂、有机(月弟)的钨、钼聚多酸盐后,有关若干有机膦合钼聚多酸“柄状”化合物的合成报导以及一些光学性质的测定。有关有机基团是C_2H_5,n-C_3H_7,n-C_4H_9,n-C_5H_(11)及C_6H_5CH_2。发现pH为3～5时,在不同的投料比例下都只形成一种类型的化合物[(RP)_2Mo_5O_(21)]~(4-),与相应的有机胂衍生物既可形成[(RAs)_2Mo_5O_(21)]~(4-)又可形成[(RAs)_2Mo_6O_(24)]~(4-)有较大的差异。     

Total synthesis of phorboxazole A. 2. Assembly of subunits and completion of the synthesis

[Structure: see text] Subunits of phorboxazole A containing C1-C2, C3-C8, C9-C19, C20-C32, C33-C41, and C42-C46 were connected in a sequence that first linked C32 with C33 and then C41 with C42. A C3-C8 fragment was joined to C9-C19, and the assembled unit was then joined with the left half of 1. Closure of the macrolide was accomplished by esterification of the C24 alcohol followed by intramolecular Horner-Wadsworth-Emmons condensation to set the (E)-C2-C3 alkene.     

Enantioselective self-assembly of bimetallic [Mn(II) (delta)-Cr(III)(C2O4)3]- and [Mn(II) (lambda)-Cr(III)(C2O4)3]- layered anionic networks templated by the optically active (Rp)- and (Sp)-[1-CH2N(n-C3H7)3-2-CH3-C5H3Fe-C5H5]+ ions

The ferrocenic ammonium (Rp)- and (Sp)-[1-CH2NR(3-)-2-CH3-C5H3Fe-C5H5] iodide salts with R=CH3, C2H5, n-C3H7, n-C4H9, were synthesized starting from the (Rp)- and (Sp)-[1-CH2N(CH3)2-2-CH3-C5H3Fe-C5H5] amines obtained in their optically active forms through asymmetric cyclopalladation of [C5H5Fe-C5H4CH2N(CH3)2]. 1H NMR studies of these planar chiral 1,2-disubstituted ferrocenic ammonium iodide salts in the presence of the (Delta)-(tris(tetrachlorobenzenediolato)phosphate(V) anion), [(Delta)-Trisphat] support the formation of specific diastereomeric ion pairs. Such intermolecular interactions can be related to the self-assembly of the two-dimensional optically active compounds [[(Sp)-1-CH2N(n-C3H7)3-2-CH3-C5H3Fe-C5H5][Mn (Delta)-Cr(C2O4)3]] and [[(Rp)-1-CH2N(n-C3H7)3-2-CH3-C5H3Fe-C5H5][Mn (Lambda)-Cr(C2O4)3]] starting from the resolved (Rp)- and (Sp)-[1-CH2N(n-C3H7)3-2-CH3-C5H3Fe-C5H5]+ ion associated to the racemic anionic building block rac-[Cr(C2O4)3]3- and Mn2+. Both enantiomeric forms of the networks behave as ferromagnets with a Curie temperature of 5.7 K.     

Comparison of lattice and continuum treatments of n-alkanes with experimental data

Using a homologous series of n-alkanes as a model system, we compare the predictions of a lattice Born-Green-Yvon (BGY) theory and a continuum BGY theory with experimental results. We find that both theories are capable of describing the fluid properties and critical points of alkanes ranging from heptamers (n-C7) to nonadecamers (n-C19). We probe the connection between the lattice and continuum BGY models and extend our discussion to include a sampling of other lattice and continuum treatments.     

Protonation and methylation of an Anderson-type polyoxoanion [IMo6O24]5-

A series of protonated and methylated Anderson-type molybdoperiodates as well as the unprotonated [IMo6O24]5- have been synthesized and structurally characterized as tetra-n-butylammonium salts: [(n-C4H9)4N]5[IMo6O24] [monoclinic, space group C2/c, a = 33.6101(3) A, b = 15.2575(1) A, c = 24.0294(2) A, beta = 126.9569(3) degrees , Z = 4], [(n-C4H9)4N]4[IMo6O23(OH)] [monoclinic, space group P21/c, a = 9.5587(1) A, b = 24.1364(2) A, c = 18.2788(2) A, beta = 90.1562(5) degrees , Z = 2], [(n-C4H9)4N]3[IMo6O22(OH)2].2DMF [monoclinic, space group P21/a, a = 17.6105(4) A, b = 15.5432(5) A, c = 29.3316(9) A, beta = 91.475(3) degrees , Z = 4], [(n-C4H9)4N]4[IMo6O23(OMe)].3H2O [orthorhombic, space group Pbca, a = 17.0679(4) A, b = 25.6998(6) A, c = 20.7428(4) A, Z = 4], [(n-C4H9)4N]3[IMo6O22(OMe)2] [monoclinic, space group P21/n, a = 10.4009(1) A, b = 14.6658(3) A, c = 23.5395(4) A, beta = 100.324(1) degrees , Z = 2]. In all of these compounds, the [IMo6O24]5- anion is protonated or methylated selectively at O atoms shared by two Mo atoms. The results have also revealed that the protonated Anderson-type molybdoperiodates readily react with methanol in a very selective manner, while the unprotonated [IMo6O24]5- anion does not react with methanol under similar conditions.     

Phase behavior of undecane-tetradecane mixtures confined in SBA-15

Phase behavior of undecane-tetradecane (n-C11H24-C14H30, C11-C14) mixtures in bulk and confined in SBA-15 have been studied using differential scanning calorimetry. The bulk C11-C14 system shows multiple phase regions due to rotator phase. Confined in the pores of SBA-15 (pore diameters 3.8-7.8 nm), the mixtures only show a melting boundary of a straight line and a curve, respectively. In SBA-15 (17.2 nm), phase behavior of themixtures has some similarity to that of the bulk. Under confinement, the phase diagrams of the mixtures vary with the pore size, temperature, and compositions.     

高效液相色谱法同时测定化妆品中的3种苯扎氯铵同系物

建立了采用高效液相色谱-二极管阵列检测器(HPLC-DAD)同时检测化妆品中3种苯扎氯铵同系物(n-C12H25-C9H13NCl、n-C14H29-C9H13NCl、n-C16H33-C9H13NCl)的方法。采用含0.5%甲酸的甲醇超声提取样品,以CAPCELL PAK SCX色谱柱(250 mm×4.6 mm, 5 μm)分离,流动相为40 mmol/L乙酸铵水溶液(含0.1%三乙胺,pH 4.0)和乙腈,梯度洗脱,流速1.0 mL/min,检测波长260 nm,柱温25 ℃,进样量20 μL。该方法的检出限50.0 mg/kg,定量限200.0 mg/kg,线性范围5.0～3000.0 mg/L,加标回收率92.5%～102.1%,相对标准偏差为3.81%～6.66%。结果表明,该方法快速、准确,能够同时测定化妆品中3种苯扎氯铵同系物。     

基于费谢尔判别法的原油、燃料油鉴别技术研究

对原油、燃料油的鉴别方法进行了研究.以来自不同国家和地区的30个原油样品以及不同产地、不同种类的24个燃料油样品中的正构烷烃(n-C7～30)、植烷(Ph)、姥鲛烷(Pr)的含量构成训练集.借助SPSS 16.0进行费谢尔(Fisher)判别分析,建立Fisher判别函数.将判别变量值代入后,得到样本的空间位置,再计算样本至各组重心的距离,据此判断分类情况.结果表明,Fisher判别法可以很好地用于原油和燃料油的鉴别,具有快速、准确等特点.     

Tween80/BmimPF6/醇/甲苯体系的相行为

以环境友好型的Tween80为表面活性剂, 以醇(乙醇、正丁醇、正己醇、正辛醇、正癸醇和异戊醇)为助表面活性剂, 对离子液体1-丁基-3-甲基咪唑六氟磷酸盐(bmimPF6)和甲苯进行了微乳化实验, 绘制了不同条件下Tween80离子液体的微乳体系的拟三元相图, 考察了醇的种类、含量对单相微乳区的影响, 并用电导法研究了在乙醇为助表面活性剂情况下, 单相微乳区的结构转变. 结果表明, 当醇(异戊醇)固定时, 随着表面活性剂/醇的质量比增加, 单相微乳区的面积逐渐增大; 不同链长的直链醇对单相微乳区的面积影响与该醇在离子液体中的溶解情况有关, 单相微乳区的面积随着直链醇链长的增加而越小; 当乙醇作助表面活性剂时, 所得到的单相微乳区的面积最大, 且单相微乳区存在着O/IL(oil-in-ionic liquid)、双连续相和IL/O(ionic liquid-in-oil)三种微结构. 尤其对离子液体微乳体系的电导随油的含量的增加而最初增大的现象进行了解释, 这一现象是由于油主要起到减少离子液体中离子对或离子的积聚, 提高带电离子淌度的作用.     

Crystal structure of N,N,N',N'-tetrakis(methyldiphenylphosphino)-bis(2'-phenoxy)-3,6-dioxaoctane.

The title molecule, [C70H68N2O4P4], is a polydentate podand consisting of four etheral oxygens, two tertiary amine nitrogens and four diphenylphosphin groups. It crystallizes in the triclinic space group P1, and there is only one half a molecule in the asymmetric unit. The coordinations around the N and P atoms are pyramidal. The conformations about C20-C21, O2-C21 and O2-C22 are gauche, anti and anti, respectively.     

Synthesis and Surface Properties of N-Alkyl-N-methylgluconamides and N-Alkyl-N-methyllactobionamides

Three series of nonionic N-alkylaldonamides, N-alkyl-N-methylgluconamides (Cn-MGA, Cn: n-C(10)H(21), n-C(12)H(25), n-C(14)H(29), n-C(16)H(33), and n-C(18)H(37)), N-alkyl-N-methyllactobionamides (Cn-MLA, alkyl as above-mentioned), and N-oleyl-N-methylglucon/lactobionamide, were synthesized in the reaction of an appropriate N-alkyl-N-methylamine with delta-D-glucolactone and lactobionic acid, respectively. Krafft temperatures of aqueous solutions and surface properties of these surfactants at 20 degrees C, i.e., surface excess concentration, Gamma(cmc), surface area demand per molecule, A(min), efficiency in surface tension reduction, pC(20), effectiveness in surface tension reduction, Pi(cmc), critical micelle concentration, CMC, and CMC/C(20) parameter as well as standard free energies of adsorption, DeltaG degrees (ads), and of micellization, DeltaG degrees (mic), were determined. It was shown that introduction of the methyl group to the amide nitrogen increased the solubility of the surfactants, which was confirmed by their Krafft temperatures. Lactobionamides are more water soluble than gluconamides. On the other hand, the Cn-MGA surfactants are more surface active than the respective Cn-MLA ones. This observation is based on the determined adsorption and micellization parameters. The presence of one double bond in a hydrocarbon chain as in oleyl-amides increases their hydrophilic character compared with that of saturated C18 derivatives. No distinct differences were observed between the A(min) values obtained for both series studied, although they differ markedly in the size of the hydrophilic groups. Copyright 2001 Academic Press.     

Measurements of the 12C/13C kinetic isotope effects in the gas-phase reactions of light alkanes with chlorine atoms

The carbon kinetic isotope effects (KIEs) of the reactions of several light non-methane hydrocarbons (NMHC) with Cl atoms were determined at room temperature and ambient pressure. All measured KIEs, defined as the ratio of the Cl reaction rate constants of the light isotopologue over that of the heavy isotopologue (Clk12/Clk13) are greater than unity or normal KIEs. For simplicity, measured KIEs are reported in per mil according to Clepsilon=(Clk12/Clk13 -1)x1000 per thousand unless noted otherwise. The following average KIEs were obtained (all in per thousand): 10.73+/-0.20 (ethane), 6.44+/-0.14 (propane), 6.18+/-0.18 (methylpropane), 3.94+/-0.01 (n-butane), 1.79+/-0.42 (methylbutane), 3.22+/-0.17 (n-pentane), 2.02+/-0.40 (n-hexane), 2.06+/-0.19 (n-heptane), 1.54+/-0.15 (n-octane), 3.04+/-0.09 (cyclopentane), 2.30+/-0.09 (cyclohexane), and 2.56+/-0.25 (methylcyclopentane). Measurements of the 12C/13C KIEs for the Cl atom reactions of the C2-C8 n-alkanes were also made at 348 K, and no significant temperature dependence was observed. To our knowledge, these 12C/13C KIE measurements for alkanes+Cl reactions are the first of their kind. Simultaneous to the KIE measurement, the rate constant for the reaction of each alkane with Cl atoms was measured using a relative rate method. Our measurements agree with published values within+/-20%. The measured rate constant for methylcyclopentane, for which no literature value is available, is (2.83+/-0.11)x10-10 cm3 molecule-1 s-1, 1sigma standard error. The Clepsilon values presented here for the C2-C8 alkanes are an order of magnitude smaller than reported methane Clepsilon values (Geophys. Res. Lett., 2000, 27, 1715), in contrast to reported OHepsilon values for methane (J. Geophys. Res. (Atmos.), 2001, 106, 23, 127) and C2-C8 alkanes (J. Phys. Chem. A, 2004, 108, 11537), which are all smaller than 10 per thousand. This has important implications for atmospheric modeling of saturated NMHC stable carbon isotope ratios. 13C-structure reactivity relationship values (13C-SRR) for alkane-Cl reactions have been determined and are similar to previously reported values for alkane-OH reactions.