以金属凝胶纤维为模板制备环境响应型共聚物一维纳米结构

分别以4-乙烯基吡啶(4VP)、丙烯酸(AAc)和N-异丙基丙烯酰胺(NIPAM)为共聚单体,以金属凝胶纤维为模板,通过自由基共聚合得到了具有环境响应性的共聚物一维纳米结构.采用红外光谱(FTIR)、流变仪和透射电子显微镜(TEM)等表征了共聚物一维纳米结构的组成、强度及微观形貌.结果表明,共聚单体与模板的配位能力强弱对所得到的共聚物一维纳米结构的产率、强度和形貌有很重要的影响.3种共聚物都具有相应的p H响应性和温度响应性,并且共聚单体含量越高,响应性越明显.     

超疏水导电聚苯胺的界面聚合

采用界面聚合和无模板法相结合的方法, 以具有疏水链的全氟癸二酸(PFSEA)为掺杂剂, 通过调节苯胺单体和FeCl₃氧化剂的浓度实现了聚苯胺三维微/纳米结构形貌和尺寸的可控制备. 扫描电子显微镜测量结果显示, 聚苯胺是由一维纳米纤维自组装形成的三维微球结构; 红外吸收光谱和紫外-可见吸收光谱结果表明, 聚苯胺微球为掺杂态. 室温下, 该微/纳米结构聚苯胺微球的电导率为 9.6×10^-3 S/cm, 表面水接触角为161.4°, 表现出半导体特性和超疏水性.     

Coordinated organogel templated fabrication of silver/polypyrrole composite nanowires

A new method to fabricate metal/conducting polymer composite nanowires is presented by taking silver/polypyrrole composite nanowires as an example.A silver(Ⅰ)-coordinated organogel as template was prepared firstly,and redox-polymerization of pyrrole took place on the gel fiber,giving product of silver/polypyrrole nanowires.The silver/polypyrrole nanowires were characterized by multiple techniques.This strategy could be carried out in one-step procedure at room temperature,and it proves the utility of coordinated organogels in template synthesis of polymer nanostructures.     

Template synthesis of hydrogel composite hollow spheres against polymeric hollow latex

Hierarchically structured hydrogel hollow spheres with functional hydrogels located at desired sites are expected to have new properties. We have developed a facile swelling polymerization route using a polymer hollow sphere as template to synthesize hierarchically structured hydrogel hollow spheres. It is significant to pre-swell the template shell with good solvents, such as chloroform containing oil-soluble initiators to control interaction, thus, polymerization locus of different water-soluble functional monomers. Some representative hydrogel composite hollow spheres such as poly(N-isopropylarylamide) and poly(acrylic acid) with different morphologies have been synthesized. Hydrogels with functional groups can favorably complex with desired materials; hierarchically structured inorganic or polymer composite hollow spheres are synthesized by a sol–gel process of the inorganic precursor by using different hydrogel composite hollow spheres as templates.     

Recent Development on Controlled Synthesis of Metal Sulfides Hollow Nanostructures via Hard Template Engaged Strategy: A Mini‐Review

In this mini‐review, we highlighted the recent progresses in the controlled synthesis of metal sulfides hollow nanostructures via hard template technique. After a brief introduction about the formation mechanism of the inorganic hollow nanostructures via hard template technique, the discussions primarily focused on the emerging development of metal sulfides hollow nanostructures. Various synthetic strategies were summarized concerning the use of the hard template engaged strategies to fabricate various metal sulfides hollow nanostructures, such as hydrothermal method, solvothermal method, ion‐exchange, sulfidation or calcination etc. Finally, the perspectives and summaries have been presented to demonstrate that a facile synthetic technique would be widely used to fabricate metal sulfides hollow nanostructures with multi‐shells and components.     

Prepared and characterization of new macrocyclic Schiff bases and their binuclear copper complexes

The new five macrocyclic ligands were synthesized by reaction of 2,6-diaminopyridine and various dialdehydes. Then, their copper(II) perchlorate complexes were synthesized by template effect by reaction of 2,6-diaminopyridine, Cu(ClO(4))(2).6H(2)O and aldehydes. The ligands and their complexes have been characterized by elemental analysis, IR, (1)H and (13)C NMR, UV-vis spectra, magnetic susceptibility, conductivity measurements, mass spectra. All complexes are diamagnetic and binuclear. The diamagnetic behaviour of the binuclear complexes may be explained by a very strong anti-ferromagnetic interaction in the Cu-Cu pair.     

Supramolecular Chirality in Organo‐, Hydro‐, and Metallogels Derived from Bis‐amides of L‐(+)‐Tartaric Acid: Formation of Highly Aligned 1D Silica Fibers and Evidence of 5‐c Net SnS Topology in a Metallogel Network

A series of bis‐amides derived from L ‐(+)‐tartaric acid was synthesized as potential low‐molecular‐weight gelators. Out of 14 bis‐amides synthesized, 13 displayed organo‐, hydro‐, and ambidextrous gelation behavior. The gels were characterized by methods including circular dichroism, differential scanning calorimetry, optical and electron microscopy, and rheology. One of the gels derived from di‐3‐pyridyltartaramide ( D‐3‐PyTA ) displayed intriguing nanotubular morphology of the gel network, which was exploited as a template to generate highly aligned 1D silica fibers. The gelator D‐3‐PyTA was also exploited to generate metallogels by treatment with various Cu^II/Zn^II salts under suitable conditions. A structure–property correlation on the basis of single‐crystal and powder X‐ray diffraction data was attempted to gain insight into the structures of the gel networks in both organo‐ and metallogels. Such study led to the determination of the gel‐network structure of the Cu^II coordination‐polymer‐based metallogel, which displayed a 2D sheet architecture made of a chloride‐bridged double helix that resembled a 5‐c net SnS topology.     

One‐pot synthesis of surface‐functionalized molecularly imprinted polymer microspheres by iniferter‐induced “living” radical precipitation polymerization

This article describes for the first time the development of a new polymerization technique by introducing iniferter‐induced “living” radical polymerization mechanism into precipitation polymerization and its application in the molecular imprinting field. The resulting iniferter‐induced “living” radical precipitation polymerization (ILRPP) has proven to be an effective approach for generating not only narrow disperse poly(ethylene glycol dimethacrylate) microspheres but also molecularly imprinted polymer (MIP) microspheres with obvious molecular imprinting effects towards the template (a herbicide 2,4‐dichlorophenoxyacetic acid (2,4‐D)), rather fast template rebinding kinetics, and appreciable selectivity over structurally related compounds. The binding association constant K_a and apparent maximum number N_max for the high‐affinity sites of the 2,4‐D imprinted polymer were determined by Scatchard analysis and found to be 1.18 × 10⁴ M^?1 and 4.37 μmol/g, respectively. In addition, the general applicability of ILRPP in molecular imprinting was also confirmed by the successful preparation of MIP microspheres with another template (2‐chloromandelic acid). In particular, the living nature of ILRPP makes it highly useful for the facile one‐pot synthesis of functional polymer/MIP microspheres with surface‐bound iniferter groups, which allows their direct controlled surface modification via surface‐initiated iniferter polymerization and is thus of great potential in preparing advanced polymer/MIP materials. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3217–3228, 2010     

一种有机酰腙类配体及其金属凝胶的结构及性能

设计合成了一种带有长链烷基和配位基团的新型有机配体2-吡啶甲醛-4'-十二烷氧基苯甲酰腙(简称L),并采用核磁(1H-NMR)、红外(FTIR)、电喷雾质谱(ESI-MS)和元素分析确认其结构.在乙醇和水的混合溶剂中,配体L可使溶剂凝胶化,并可与多种金属离子(Co(Ⅱ),Ni(Ⅱ),Zn(Ⅱ)和Cu(Ⅱ)作用,形成金属凝胶.采用扫描电镜分析表明,L自身形成的凝胶及金属凝胶的微观形貌均为相互搭接的纤维状结构.采用紫外光谱分析表明在乙醇溶液中L分子形成了聚集体.采用平板流变仪分析表明引入金属离子可提高凝胶的强度.进一步合成了L与Cu(Ⅱ)的配合物,通过对比配合物与金属凝胶的红外光谱和紫外光谱,证明金属凝胶中配体L与金属离子间形成了配位作用.     

Strongly Coupled Pt–Ni2GeO4 Hybrid Nanostructures as Potential Nanocatalysts for CO Oxidation

A facile and low‐cost method has been developed to successfully fabricate 3D flower‐like and sphere‐like Ni₂GeO₄ nanostructures with tunable sizes and shapes. It is found that the hard template, polymethyl methacrylate (PMMA) nanopsheres, is essential to the formation of the final products. The as‐prepared nanostructures can serve as an outstanding support for Pt nanoparticles after surface modification with L ‐lysine. In the catalytic test of CO oxidation, Pt–Ni₂GeO₄ nanoflowers exhibited much higher catalytic performance compared with Pt–Ni₂GeO₄ nanospheres, representing a typical size‐dependent catalytic property.     

Synthesis of branched polystyrene by ATRP exploiting divinylbenzene as branching comonomer

Branched polystyrenes have been synthesized using atom transfer radical polymerization (ATRP) of styrene in the presence of divinyllbenzene (DVB) as branching comonomer. The synthesis was completed via facile one pot approach. Mole ratio of styrene to DVB in range of 5:1-30:1 was employed to obtain soluble polymers. The kinetics of the polymerization and evolution of polymer compositions were revealed by determining the conversions of reactants by gas chromatography (GC). The growth of molecular weight was monitored by GPC and the results indicate that the branched polymers were formed by self-condensing vinyl polymerization (SCVP) of AB^∗ monomer or macromonomers. The branched structure of the resulting polymers was confirmed by the remarkable discrepancies of the weight average molecular weights determined by GPC and multi angle laser light scattering (MALLS). The specific viscosity of the resulting polymer is also much lower compared with that of linear analogues. The influence of dosage of initiator and catalyst on the yield and molecular weights of the resulting polymers was also investigated.     

Bicontinuous ceramics with high surface area from block copolymer templates

Mesoporous polymers with gyroid nanochannels can be fabricated from the self-assembly of degradable block copolymer, polystyrene-b-poly(L-lactide) (PS-PLLA), followed by hydrolysis of PLLA block. Well-defined polymer/ceramic nanohybrid materials with inorganic gyroid nanostructures in a PS matrix can be obtained by using the mesoporous PS as a template for sol-gel reaction. Titanium tetraisopropoxide (TTIP) is used as a precursor to give a model system for the fabrication of metal oxide nanostructures from reactive transition metal alkoxides. By controlling the rates of capillary-driven pore filling and sol-gel reaction, the templated synthesis can be well-developed. Also, by taking advantage of calcination, bicontinuous TiO(2) with controlled crystalline phase (i.e., anatase phase) can be fabricated after removal of the PS template and crystallization of TiO(2) by calcination leading to high photocatalytic efficiency. This new approach provides an easy way to fabricate high-surface-area and high-porosity ceramics with self-supporting structure and controlled crystalline phase for practical applications. As a result, a platform technology to fabricate precisely controlled polymer/ceramic nanohybrids and mesoporous ceramic materials can be established.     

Selected-control synthesis of ZnO nanowires and nanorods via a PEG-assisted route

Long-chain polymer-assisted growth of one-dimensional (1D) nanostructures has been investigated in previous research. This kind mild method has lots of merits such as not requiring complex procedures, without template supporting etc. Can the short-chain polymer also be used to grow long nanowires? In the present work, a short-chain polymer (PEG400) was found to promote the formation of 1D ZnO nanostructures, which cannot be obtained by long-chain polymers (such as PEG10000). Moreover, nanowires and nanorods can be selectively synthesized by using short-chain polymers. The influence factors for the formation of 1D ZnO nanostructures were also investigated in detail. The XRD, Raman spectrum, XPS, SEM, TEM, ED, HRTEM, EDXA, and PL spectra have been provided for the characterization of the as-obtained nanowires and nanorods.     

Template atom transfer radical polymerization of a diaminopyrimidine‐derivatized monomer in the presence of a uracil‐containing polymer

Uracil‐derivatized monomer 6‐undecyl‐1‐(4‐vinylbenzyl)uracil and diaminopyrimidine‐derivatized monomer 2,6‐dioctanoylamido‐4‐methacryloyloxypyrimidine (DMP) were synthesized and polymerized by atom transfer radical polymerization (ATRP). A well‐defined, highly soluble, uracil‐containing polymer, poly[6‐undecyl‐1‐(4‐vinylbenzyl)uracil] (PUVU), was prepared in dioxane at 90 °C with CuBr/1,1,4,7,10,10‐hexamethyltriethylenetetramine as the catalyst and methyl α‐bromophenylacetate as the initiator. PUVU was further used as a template for the ATRP of DMP. The enhanced apparent rate constant of the DMP polymerization in the presence of PUVU indicated that the ATRP of DMP occurred along the PUVU template. The template polymerization produced a stable and insoluble macromolecular complex, PUVU/poly(2,6‐dioctanoylamido‐4‐methacryloyloxypyrimidine). An X‐ray diffraction study confirmed that the complex had strandlike domains. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6607–6615, 2006     

Template-free one-step electrochemical formation of polypyrrole nanowire array

Oriented polypyrrole nanowire (nanorod) array readily forms using one-step pyrrole electropolymerization without using a template. These nanostructures having diameter in the range of 40–120 nm are obtained by electrogenerating polypyrrole in the presence of jointly non-acidic and weak-acidic anions. The latter are essential, their presence leads to the formation of an overoxidized polypyrrole thin layer that surrounds the polypyrrole nanostructure base. This simple and convenient method allows direct polymer nanowire array fabrication on various conductive substrates, the length of nanostructures being controlled by the polymerization time. Finally, a reaction mechanism involving oxidation of pyrrole and water and polypyrrole overoxidation is discussed.     

Modification of Adhesive and Latex Properties for Starch Nanoparticle‐Based Pressure Sensitive Adhesives

Starch nanoparticle (SNP)‐based pressure sensitive adhesives (PSAs) with core‐shell particle morphology (starch nanoparticle core/acrylic polymer shell) are produced via seeded, semi‐batch emulsion polymerization at 15 wt% SNP loading (relative to total polymer weight) and 40 wt% latex solids. Crosslinker and chain transfer agent (CTA) are introduced to the acrylic shell polymer formulation at a range of concentrations according to a 3² factorial design to tailor the latex and adhesive properties of SNP‐based latexes. The crosslinker and CTA show no significant effect on polymerization kinetics, particle size, and viscosity. Latex gel content is predicted using an empirical model, which is a function of crosslinker and CTA concentration. Both the gel content and glass transition temperature strongly affect the adhesive properties (tack, peel strength, and shear strength) of the SNP‐based latex films. 3D response surfaces for the adhesive properties are constructed to facilitate the design of SNP‐based PSAs with desired properties.     

A facile route for shape-selective synthesis of silica nanostructures using poly-L-lysine as template

A facile method for the shape-selective synthesis of silica nanostructures using a reversemicroemulsion -mediated template(RMMT) technique is reported.In this method,positive poly-Llysine (PLL) is selected as template due to its configuration diversity.By adjusting pH and concentration, PLL demonstrates various secondary structures containing random coil,α-helix andβ-sheet,which result in the formation of silica nanorods,silica nanospheres and silica nanotubes in the reversemicroemulsion system,respectively.Thus,the shape-selective synthesis of silica nanostructures might be achieved by using PLL as structural template in the reverse-microemulsion system.     

Colloidal chemical approaches to inorganic micro- and nanostructures with controlled morphologies and patterns

The controlled synthesis of inorganic micro- and nanostructures with tailored morphologies and patterns has attracted intensive interest because the properties and performances of micro- and nanostructured materials are largely dependent on the shape and structure of the primary building blocks and the way in which the building blocks are assembled or integrated. This review summarizes the recent advances on the solution-phase synthesis of inorganic micro- and nanostructures with controlled morphologies and patterns via three typical colloidal chemical routes, i.e., synthesis based on catanionic micelles, reactive templates, and colloidal crystal templates, with focus on the approaches developed in our lab. Firstly, catanionic micelles formed by mixed cationic/anionic surfactants are used as effective reaction media for the shape-controlled synthesis of inorganic nanocrystals and the solution growth of hierarchical superstructures assembled by one-dimensional (1D) nanostructures. Secondly, reactive template-directed chemical transformation strategy provides a simple and versatile route to fabricate both hollow structures and 1D nanostructures. Thirdly, colloidal crystals are employed as very effective templates for the facile solution-phase synthesis of novel inorganic structures with controlled patterns, such as three-dimensionally (3D) ordered macroporous materials and two-dimensionally (2D) patterned nanoarrays and nanonets. Finally, a brief outlook on the future development in this area is presented.     

Fabrication of Defined Polydopamine Nanostructures by DNA Origami‐Templated Polymerization

A versatile, bottom‐up approach allows the controlled fabrication of polydopamine (PD) nanostructures on DNA origami. PD is a biosynthetic polymer that has been investigated as an adhesive and promising surface coating material. However, the control of dopamine polymerization is challenged by the multistage‐mediated reaction mechanism and diverse chemical structures in PD. DNA origami decorated with multiple horseradish peroxidase‐mimicking DNAzyme motifs was used to control the shape and size of PD formation with nanometer resolution. These fabricated PD nanostructures can serve as “supramolecular glue” for controlling DNA origami conformations. Facile liberation of the PD nanostructures from the DNA origami templates has been achieved in acidic medium. This presented DNA origami‐controlled polymerization of a highly crosslinked polymer provides a unique access towards anisotropic PD architectures with distinct shapes that were retained even in the absence of the DNA origami template.     

Efficient synthesis of narrowly dispersed molecularly imprinted polymer microspheres with multiple stimuli-responsive template binding properties in aqueous media

A facile, general, and highly efficient approach to obtain narrowly dispersed molecularly imprinted polymer microspheres with multiple stimuli-responsive template binding properties in aqueous media by successive RAFT polymerization is described.