Micellization behaviour and thermodynamic parameters of 12-2-12 gemini surfactant in (water + organic solvent) mixtures

The effect of organic solvents on micellization behaviour and thermodynamic parameters of a cationic gemini (dimeric) surfactant, C₁₂H₂₅(CH₃)₂N⁺–(CH₂)₂–N⁺(CH₃)₂C₁₂H₂₅·2Br^?, (12-2-12) was studied in aqueous solutions over the range of T = (293.15 to 323.15) K using the conductometric technique. Ethylene glycol (EG), dimethylsulfoxide (DMSO) and 1,4-dioxan (DO) were used as organic solvents with three different contents. The critical micelle concentration (cmc) and the degree of counter ion dissociation (α) of micelles in the water and in the (water + organic solvent) mixtures including 10%, 20%, and 30% solvent contents were determined. The standard Gibbs free energy $(\mathrm{\Delta }{G}_{\text{m}}^{°})$, enthalpy $(\mathrm{\Delta }{H}_{\text{m}}^{°})$ and entropy $(\mathrm{\Delta }{S}_{\text{m}}^{°})$ of micellization were estimated from the temperature dependence of the cmc values. It was observed that the critical micelle concentration of the gemini surfactant and the degree of counter ion dissociation of the micelle increased as the volume percentage of organic solvent, and temperature increased. The standard Gibbs free energy of micellization was found to be less negative with the increase in the organic solvent content and temperature.     

The influence of solvent structure on the solvolysis of a ruthenium(II) complex in water–acetonitrile mixtures

The solvent effect on the rate of aquation of trans-[Ru(py)₄Cl₂] has been investigated by u.v. spectroscopy in the 40–55 °C range in MeCN–H₂O media. The thermodynamic activation parameters are calculated and discussed in terms of solvation effects. Log k was correlated with the reciprocal of the dielectric constant. A non-linear correlation was obtained and is discussed on the basis of specific solvation.     

Thermodynamic models for determination of the solubility of dibenzothiophene in (methanol + acetonitrile) binary solvent mixtures

In this paper, we focused on solubility and solution thermodynamics of dibenzothiophene. By the gravimetric method, the solubility of dibenzothiophene was measured in (methanol + acetonitrile) binary solvent mixtures at temperatures from (278.15 to 333.15) K under atmosphere pressure. The solubility data were fitted using a modified Apelblat equation, a variant of the combined nearly ideal binary solvent/Redich–Kister (CNIBS/R–K) model and Jouyban–Acree model. Computational results showed that the modified Apelblat equation was superior to the other two equations. In addition, the thermodynamic properties of the solution process, including the Gibbs free energy, enthalpy, and entropy, were calculated by the van’t Hoff analysis. The experimental results showed that methanol could be used as effective anti-solvents in the crystallization process.     

Effective dispersion of fullerene with methacrylate copolymer in organic solvent and poly(methyl methacrylate)

Dispersion of fullerene, C₆₀, by addition of polymethacrylate dispersant in methyl methacrylate (MMA) and incorporation of C₆₀ into poly(methyl methacrylate) (PMMA) were investigated. Copolymers synthesized by radical copolymerization of MMA and 2-naphthyl methacrylate (NMA), poly(MMA-co-NMA), effectively dispersed C₆₀ in MMA to form clusters of 20?nm. In these cases, addition of minimal 110 naphthyl groups per unit C₆₀ molecule afforded to give clusters with minimum of 20?nm sizes. Furthermore, block copolymers, poly(MMA-b-NMA) with MMA/NMA mole ratio from 12:1 to 20:1, also efficiently dispersed C₆₀ to give formation of clusters of 20?nm size by addition of minimal 40 naphthyl groups per unit C₆₀ molecule, which was corresponding to approximate nine layers of naphthyl group in block copolymer adsorbed on the surface of the cluster. Hybrid films of C₆₀/PMMA, prepared by casting of C₆₀-dispersed solution containing PMMA, exhibited absorbance at 400?nm linearly increased with C₆₀ content.     

Intermediates in reactions of the diimine complex trisferrozineiron(II) with hydroxide or cyanide in binary aqueous solvent mixtures and in micelles

Summary Kinetic and spectroscopic observations are reported for the reaction of tris-ferrozineiron(II) with hydroxide in DMSO- and DMF-H₂O mixtures and with cyanide in MeOH- and DMSO-H₂O mixtures. Micellar effects (CTAB) are described for the reactions of tris-ferrozineiron(II) and of tris-5-sulphonato-1,-10-phenanthrolineiron(II) with hydroxide. Results for the ferrozine complex are discussed in terms of mechanisms involving intermediates formed by attack of hydroxide or cyanide at the coordinated ligand.     

Micropartioning and solubilization enhancement of 1,2-bis(bis(4-chlorophenyl) methyl)diselane in mixed micelles of binary and ternary cationic-nonionic surfactant mixtures

The aqueous solubilization of the organoselenium compound viz., 1,2-bis(bis(4-chlorophenyl)methyl)diselane [(ClC(6)H(4))(2)CHSe](2) has been investigated experimentally in micellar solutions of two cationic (hexadecyltrimethylammonium bromide, CTAB, hexadecyltrimethylammonium chloride, CTAC) and one nonionic (polyoxyethylene(20)mono-n-hexadecyl ether, Brij 58) surfactants possessing the same hydrocarbon "tail" length and in their single as well as equimolar binary and ternary mixed states. Solubilization capacity determined with spectrophotometry and tensiometry has been quantified in terms of molar solubilization ratio and micelle-water partition coefficient. FTIR, UV-vis, fluorescence and zeta potential measurements have been utilized to ascertain the interaction of organochalcogen compound with surfactants. Equimolar cationic-nonionic surfactant combinations show better solubilization capacity than pure cationics or nonionics, whereas equimolar cationic-cationic-nonionic ternary surfactant systems exhibit intermediate solubilization efficiency between their single and binary counterparts. Locus of solubilization of [(ClC(6)H(4))(2)CHSe](2) in different micellar solutions was probed by UV-visible spectroscopy. The investigation has presented precious information for the preference of mixed surfactants for solubilizing water-insoluble compounds. Indeed the solubilization aptitude of these surfactants is not merely related to molar capacity. The results furnish adequate support to justify comprehensive exploration of the surfactant properties that influence solubilization.     

Effect of alkyl chain length and size of the headgroups of the surfactant on solvent and rotational relaxation of Coumarin 480 in micelles and mixed micelles

The effect of alkyl chain length and size of the headgroups of the surfactant on the solvation dynamics and rotational relaxation of Coumarin 480 (C-480) has been investigated using dynamic Stokes' shift of C-480 in different types of alkyltrimethylammonium bromide micelles and mixed micelles. The rotational relaxation time increases with increase in alkyl chain length of the surfactant. The increase in the number of alkyl chains of the surfactant leads to the more close packed micelles, hence the microviscosity of the micelles increases and consequently rotational relaxation time increases. Solvation time also increases due to the increase in number of alkyl chains of the surfactant. The change in solvation and rotational relaxation time is more prominent in micelles compared to mixed micelles. The solvation and rotational relaxation time also increase with the increase in size of the headgroup of the surfactant.     

Acidity in aqueous mixed solvent systems—III : Influence of the organic solvent molecular structure on the acidity of aquo-organic mixtures (acidity function,water structure,hydrophilic and hydrophobic effects)

The acidity functions Ho and H_R have been determined for different aqueous organic mixtures (diols, carbohydrates) at constant acid concentration. We have checked, with a reaction involving a slow proton transfer, that Ho and H_R vary in direct proportion to the acidity of the systems.The results are interpreted in terms of the variations of the proton activity which is dependent on the modifications of the water structure by the organic cosolvent.     

The role of the surfactant head group in the emulsification process: binary (nonionic-ionic) surfactant mixtures

Dilute emulsions of dodecane in water were prepared under constant flow rate conditions with binary surfactant systems. The droplet size distribution was measured as a function of the mixed surfactant composition in solution. The systems studied were (a) the mixture of anionic sodium dodecyl sulfate (SDS) with nonionic hexa(ethyleneglycol) mono n-dodecylether (C12E6) and (b) the mixture of cationic dodecyl pyridinium chloride (DPC) with C12E6. At a constant concentration of SDS or DPC surfactant in solution (below the CMC) the mean emulsion droplet size decreases with the increase in the amount of C12E6 added to the solution. However, a sharp break of this droplet size occurs at a critical concentration and beyond this point the mean droplet size did not significantly change upon further increase of the C12E6. This point was found to corresponded to the CMC of the mixed surfactant systems (as previously determined from microcalorimetry measurements) and this result suggested the mixed adsorption layer on the emulsion droplet was similar to the surfactant composition on the mixed micelles. The emulsion droplet size as a function of composition at the interface was also studied. The mean emulsion droplet size in SDS-C12E6 solution was found to be lower than that in DPC-C12E6 system at the equivalent mole fraction of ionic surfactant at interface. This was explained by the stronger interactions between sulphate and polyoxyethylene head groups at the interface, which facilitate the droplet break-up. Counterion binding parameter (beta) was also determined from zeta-potential of dodecane droplets under the same conditions and it was found that (beta) was independent of the type of the head group and the mole fraction of ionic surfactant at interface.     

Ionic equilibria in aqueous organic solvent mixtures the dissociation constants of acids and salts in tetrahydrofuran/water mixtures

The dissociation constants of several acids (perchloric, hydrochloric, phosphoric, acetic and benzoic acids) and of some sodium salts (chloride, acetate and benzoate) have been conductometrically determined in tetrahydrofuran/water mixtures up to a 90% of tetrahydrofuran in volume. The results demonstrate that conductometry can be successfully applied to determine the dissociation constants of salts and moderately weak and strong acids in the studied mixtures. The dissociation constants of the acids and some bases taken from the literature have been fitted to solvent composition through a previously derived equation, which is based on a preferential solvation model. The fitting parameters obtained allow calculation of the dissociation constant for any solvent composition inside the applicability solvent composition range. From the pK value, the pH of any buffered solution, such as those used in liquid chromatography, can be calculated for the particular tetrahydrofuran/ water composition of interest. Appreciable ion-pairing for sodium salts and strong acids has been observed for tetrahydrofuran contents higher than 60% in volume. Therefore, the accurate calculation of the pH values of buffers in tetrahydrofuran-rich solutions must take into account the pK values of the acid and salt.     

Autoprotolysis constants and standardization of the glass electrode in acetonitrile-water mixtures. Effect of solvent composition

Standard e.m.f.s for the cell GE/HCl/AgCl/Ag/Pt (GE=glass electrode) in acetonitrile-water mixtures containing 0–70% (w/w) of acetonitrile were obtained. Values of the autoprotolysis constant, K_ap, of these mixed solvents were also determined from e.m.f. measurements of the cell GE/KCl + KS/AgCl/Ag/Pt. The influence of variations in the solvent composition on pK_ap values was evaluated. Over the whole of the composition range studied the pK_ap values were linearly correlated with the mole fraction of acetonitrile and with the reciprocal of the relative permittivity of solvent mixtures. Linear relationships were also obtained for pK_ap values vs. the Kamlet-Taft π^★ polarizability/dipolarity parameter in the range 0–50% (w/w).     

Effect of composition on the width of the calorimetric glass transition in polymer–solvent and solvent–solvent mixtures

The calorimetric glass‐transition temperature (T_g) and transition width were measured over the full composition range for solvent–solvent mixtures of o‐terphenyl with tricresyl phosphate and with dibutyl phthalate and for polymer–solvent mixtures of polystyrene with three dialkyl phthalates. T_g shifted smoothly to higher temperatures with the addition of the component with the higher T_g for both sets of solvent–solvent mixtures. The superposition of the differential scanning calorimetry traces showed almost no composition dependence for the width of the transition region. In contrast, the composition dependence of T_g in polymer–solvent mixtures was different at high and low polymer concentrations, and two distinct T_g's were observed at intermediate compositions. These results were interpreted in terms of the local length scale and associated local composition variations affecting T_g. The possible implications of these results for the dynamics of miscible polymer blends were examined. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1155–1163, 2004     

Small-angle neutron-scattering study and micellar model of the gemini (phenylenedimethylene)bis(n-octylammonium)dibromide surfactant micelles in water

The microstructure of the micelles formed in aqueous solution by gemini surfactants with aromatic spacers, [Br(CH₃)₂N⁺(C _m H_{2 m +1})-(Ph)-(C _m H_{2 m +1})N⁺(CH₃)₂Br, m=8 and Ph = o-, m- or p-phenylenedimethylene] has been examined by small-angle neutron scattering. Aggregation of the gemini surfactants with an o-phenylenedimethylene spacer brings about formation of premicelles and small micelles at concentrations below the second critical micelle concentration, while above this concentration marked micellar growth and variation in shape occurs. It is suggested that the minimum aggregate formed at this critical micelle concentration may be the trimer or tetramer and that this result supports the mechanism of “gemini → submicelle → assembly” for micellar growth. Received: 8 September 1998 Accepted in revised form: 27 November 1998     

Kinetics of the periodate oxidation of octacyanomolybdate(IV) in ethanol-water solvent mixtures

The kinetics of the oxidation of Mo(CN) ₈ ^4– by IO ₄ ^– has been studied in ethanol—water solvent mixtures over a temperature range of 15–35 °C. The effect of solvent composition on the reaction rate and the mechanism has been investigated. Activation parameters are given. An inner-sphere mechanism, consistent with the kinetic results, is proposed.

---

Kinetik der Periodat-Oxidation von Octacyanomolybdat(IV) in Ethanol-Wasser

Zusammenfassung Die Kinetik der Oxidation von Mo(CN) ₈ ^4– mit IO_4/– wurde in Ethanol—Wasser über einen Temperaturbereich von 15–35 °C untersucht. Der Effekt der Lösungsmittelzusammensetzung auf die Reaktionsgeschwindigkeit und der Mechanismus der Reaktion werden diskutiert. Die Aktivierungsparameter sind angeführt. Es wird ein Inner-Sphere-Mechanismus vorgeschlagen, der mit den kinetischen Ergebnissen konsistent ist.

     

Voltammetric behaviour of rhenium(I) complexes with phosphine and carbon monoxide ligands in acetonitrile solvent

Summary The anodic and cathodic behaviour of the complexesmer-[ReCl(CO)₃(PMe₂Ph)₂],fac[ReCl(CO)₃(PMe₂Ph)₂],mer-[ReCl(CO)₃(PPh₃)₂], and [ReCl(CO)₂(PMe₂Ph)₃] in acetonitrile solvent were studied using platinum and mercury electrodes. Cyclic voltammetry and controlled potential coulometry were the main electroanalytical techniques employed. The nature of the electrolysis products and of the electrode oxidation and reduction processes were investigated. In particular, [ReCl(CO)(MeCN)₂(PMe₂Ph)₃][ClO₄]₂, [ReCl₃(CO)₂(PMe₂Ph)₂], and a not completely defined rhenium(-I) complex were electrochemically synthesized and characterized by means of i.r. and¹H n.m.r. spectroscopy, and by elemental analysis.     

Coupling of acetonitrile deproteinization and salting-out extraction with acetonitrile stacking for biological sample clean-up and the enrichment of hydrophobic compounds (porphyrins) in capillary electrophoresis

A new sample pretreatment approach in CE was developed for concurrent biological sample clean-up and the concentration of hydrophobic compounds based on the combination of ACN deproteinization with salting-out extraction. Further enhancement in concentration detection sensitivity was achieved by coupling (offline) salting-out extraction with an online CE sample enrichment technique known as "ACN stacking". By optimizing the pH of salting-out extraction, a number of model compounds (hydrophobic porphyrins with clinical significances), i.e. zinc-protoporphyrin, protoporphyrin, and coproporphyrin (CP) III and I, can be efficiently extracted from the aqueous sample into a smaller volume organic solvent (ACN) phase and an enrichment factor of ca. 100 can be obtained. The pressure injection of the enriched ACN phase (containing ca.1% NaCl) into the CE capillary at 10% capillary volume resulted in additional concentration of the various hydrophobic porphyrins, allowing for a combined enrichment factor of ca.1000 to be obtained. Calibration curves obtained for the determination of a pair of positional isomers with significant diagnostic value, urinary CPIII and CPI, were found to be linear between 10-300 ng/mL (with R2 = 0.999), and LODs (absorbance detection at 400 nm) were ca. 0.8 ng/mL (1.1 nmol/L of CPIII or CPI). Based on a single salting-out extraction, intraday precisions (nine consecutive injections) for both CPIII and CPI (at spiked concentrations of 10-300 ng/mL into urine) in terms of migration time and peak area were found to be within the range of 0.2-0.5 and 0.8-2.9%, respectively.