Cell adhesion and surface properties of polystyrene surfaces grafted with poly(N-isopropylacrylamide)

Cell adhesion plays a key role in various aspects of biological and medical sciences. In this study, poly(Nisopropylacrylamide) (PNIPAM) was grafted on polystyrene surfaces using different solvents under UV radiation. Moreover, the relation between surface roughness and cell adhesion were evaluated by gravimetric, SEM, AFM, contact angle measurement and cellular analyses. The gravimetric analysis clearly indicated an increase in the grafting by adding 10% methanol to water. The study of surface topography by AFM images showed an increase in the surface roughness and as a result of which, a decrease in wettablity was observed. At 37 °C, epithelial cells were well attached and proliferated on the grafted surfaces, while these cells were spontaneously detached below 32 °C in the absence of any enzymes. Moreover, MTT assay and SEM images indicated good cell viability and an increase in cell adhesion caused by the roughness increase. The results of this study reveal the great potential of PNIPAM-grafted polystyrene for being used in the biomedical fields such as drug delivery systems, tissue engineering and cell separation.     

Ultrathin poly(N-isopropylacrylamide) grafted layer on polystyrene surfaces for cell adhesion/detachment control

We investigated physicochemical properties of two types of poly(N-isopropylacrylamide) (PIPAAm)-grafted tissue culture polystyrene (TCPS) surfaces, to elucidate the influential factors for thermally regulated cell adhesion and detachment to PIPAAm-grafted surfaces. The two types of PIPAAm-grafted surfaces were prepared by the electron beam polymerization method. Attenuated total reflection Fourier transform infrared spectroscopy revealed that amounts of the grafted polymers were 1.4 +/- 0.1 microg/cm2 for PIPAAm-1.4 and 2.9 +/- 0.1 microg/cm2 for PIPAAm-2.9. Both PIPAAm-grafted surfaces showed hydrophobic/hydrophilic property alterations in response to temperature. However, PIPAAm-1.4 surfaces were more hydrophobic (cos theta = 0.21 at 37 degrees C and cos theta = 0.35 at 20 degrees C) than PIPAAm-2.9 (cos theta = 0.42 at 37 degrees C and cos theta = 0.50 at 20 degrees C) both above and below the PIPAAm's transition temperature. Thicknesses of the grafted PIPAAm layers were estimated to be 15.5 +/- 7.2 nm for PIPAAm-1.4 and 29.5 +/- 8.4 nm for PIPAAm-2.9, by the use of UV excimer laser and atomic force microscope. Bovine carotid artery endothelial cells (ECs) adhere to the surfaces of PIPAAm-1.4 and proliferate to form confluent cell monolayers. The cell monolayers were harvested as single cell sheets by temperature decrease from 37 to 20 degrees C. On the contrary, ECs did not adhere to the surfaces of PIPAAm-2.9. This phenomenon was correlated with an adsorption of cell adhesion protein, fibronectin, onto surfaces ofPIPAAm-1.4 and -2.9. In the case of nano-ordered thin grafted surfaces, the surface chain mobility is strongly influenced by the thickness of PIPAAm grafted layers because dehydration of PIPAAm chains should be enhanced by the hydrophobic TCPS surfaces. PIPAAm graft amounts, that is, thickness of the PIPAAm grafted layers, play a crucial role in temperature-induced hydrophilic/hydrophobic property alterations and cell adhesion/detachment behavior.     

Tailoring thermoresponsive nanostructured poly(N-isopropylacrylamide) hydrogels made with poly(acrylamide) nanoparticles

The thermoresponsive behavior and mechanical properties of nanostructured hydrogels, which consist of poly(acrylamide) nanoparticles embedded in a cross-linked poly(N-isopropylacrylamide) hydrogel matrix, are reported here. Nanostructured hydrogels exhibit a tuned volume phase transition temperature (T _VPT), which varies with nanoparticle content in the range from 32 up to 39–40 °C. Moreover, larger equilibrium water uptake, faster swelling and de-swelling rates, and larger equilibrium swelling at 25 °C were obtained with nanostructured hydrogels compared with those of conventional ones. Elastic and Young’s moduli were larger than those of conventional hydrogels at similar swelling ratios. The tuned T _VPT and the de-swelling rate were predicted with a modified Flory–Rehner equation coupled with a mixing rule that considers the contribution of both polymers. These behaviors are explained by a combination of hydrophilic/hydrophobic interactions and by the controlled inhomogeneities (nanoparticles) introduced by the method of synthesis.     

Cell attachment and proliferation on poly(carbonate urethanes) with various degrees of nanophase separation

In this work, we synthesized six 4,4'-diphenylmethane diisocyanate (MDI)-based poly(carbonate urethanes) (PCU) by using the macrodiol poly(1,6-hexyl, 1,2-ethyl carbonate) diol (MW = 2,017) in different molar ratios to MDI. The bulk and surface properties of cast PCU films were analyzed. The glass transition temperatures measured by dynamic mechanical analysis (DMA) and surface images obtained from atomic force microscopy (AFM) indicated that these PCU had various degrees of nanophase separation that changed with the time and film casting temperatures. The degree of nanophase separation correlated very well with endothelial cell attachment and proliferation on PCU.     

Adsorption of poly(N-isopropylacrylamide) on glass substrata

The adsorption of poly(N-isopropylacrylamide) (PNIPAAM), a well known thermosensitive polymer, on glass was investigated by X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). The polymer was dissolved in water at low (0.02 g/L) and high (2 g/L) concentration and the tested temperatures were below (25 degrees C) and above (50 degrees C) the lower critical solubility temperature (LCST). Whatever the conditions, a smooth layer of adsorbed molecules spread along the surface was observed. The thickness was about twice higher for high concentration compared to low concentration. The cohesion in the adsorbed layer, as revealed by scraping tests performed by AFM, was higher above the LCST than below the LCST. On top of this adsorbed layer, single-chain coils, globules, or aggregates were present, depending on concentration and temperature. The observation of these additional adsorbed entities was poorly reproducible, presumably due to the lack of shear control upon rinsing. These results emphasize the importance of the characterization of surface morphology to interpret amounts of adsorbed polymers.     

Polystyrene latex particles coated with crosslinked poly(N-isopropylacrylamide)

Thermoresponsive colloidal particles were prepared by seeded precipitation polymerization of N-isopropylacrylamide (NIPAM) in the presence of a crosslinking monomer, N,N-methylenebisacrylamide (MBA), using polystyrene latex particles (ca. 50 nm in diameter) as seeds in aqueous dispersion. Phase transitions of the prepared poly(N-isopropylacrylamide), PNIPAM, shells on polystyrene cores were studied in comparison to colloidal PNIPAM microgel particles, in H₂O and/or in D₂O by dynamic light scattering, microcalorimetry and by ¹H NMR spectroscopy including the measurements of spin–lattice (T1) and spin–spin (T2) relaxation times for the protons of PNIPAM. As expected, the seed particles grew in hydrodynamic size during the crosslinking polymerization of NIPAM, and a larger NIPAM to seed mass ratio in the polymerization batch led to a larger increase of particle size indicating a product coated with a thicker PNIPAM shell. Broader microcalorimetric endotherms of dehydration were observed for crosslinked PNIPAM on the solid cores compared to the PNIPAM microgels and also an increase of the transition temperature was observed. The calorimetric results were complemented by the NMR spectroscopy data of the ¹H-signal intensities upon heating in D₂O, showing that the phase transition of crosslinked PNIPAM on polystyrene core shifts towards higher temperatures when compared to the microgels, and also that the temperature range of the transition is broader.     

Thermoresponsive poly(N-isopropylacrylamide) nanogels/poly(acrylamide) nanostructured hydrogels

Here we report the preparation and characterization of nanostructured thermo-responsive poly(acrylamide) (PAM)-based hydrogels. The addition of slightly crosslinked poly(N-isopropylacrylamide) (PNIPA) nanogels to AM reactive aqueous solution produces nanostructured hydrogels that exhibit a volume phase transition temperature (T_VPT). Their swelling kinetics, T_VPT's and mechanical properties at the equilibrium-swollen state (H_eq) are investigated as a function of the concentration of PNIPA nanogels in the nanostructured hydrogels. Nanostructured hydrogels with PNIPA nanogels/AM mass ratios of 20/80 and above exhibit higher H_eq and longer time to reach the equilibrium swelling than those of the conventional PAM hydrogels. However, the PNIPA nanogels possess thermo-responsive character missing in conventional PAM hydrogels. The T_VPT of nanostructured hydrogels depends on PNIPA nanogel content but their elastic and Young moduli are larger than those of conventional hydrogels at similar swelling ratios. Swelling kinetics, T_VPT, and mechanical properties are explained in terms of the controlled in-homogeneities introduced by the PNIPA nanogels during the polymerization.     

Fluorocarbon- containing hydrophobically modified poly(N-isopropylacrylamide)

A fluorocarbon-modified poly(N-isopropylacrylamide) has been synthesized by copolymerization of N-isopropyl acrylamide with a small amount of acrylate or methacrylate containing a perfluoroalkyl group. It was found that the hydrophilicity of macromolecular backbone is an important factor to the solution properties of the copolymers and that hydrophobic association between fluorocarbon groups is stronger than that between the corresponding hydrocarbon analogies. The viscosity of some of the copolymer solutions was very sensitive to temperature. It was dilatant at higher fluorocarbon comonomer content ( > 0.20-1.0 mol%) and was Newtonian at very low fluorocarbon comonomer content (0.03-0.2 mol% ) . Evidence for hydrophobic association of the fluorocarbon groups was obtained from the effects of adding Nad and surfactants on the solution viscosity. The LC-ST properties of these copolymers were studied by DSC method and this was also found to be consistent with hydrophobic association between the fluorocarbo     

Fluorescence studies on volume phase transition in poly(acrylamide) and poly(N-isopropylacrylamide) gels

The changes in microenvironments during the volume phase transition of poly(acrylamide) and poly(N-isopropylacrylamide) gels induced by pH change or the change in solvent composition were studied by using dansyl or pyrenyl fluorescent probes.     

Swelling kinetics of poly(N-isopropylacrylamide) minigels

We synthesize poly(N-isopropylacrylamide) (PNIPAM) gels with different sizes in the micrometer scale by a slight variation of a recent emulsion polymerization method (ref 1). The procedure is different than that typically used for obtaining macroscopic PNIPAM hydrogels. The resultant minigel suspension is polydisperse thus allowing the swelling kinetics for different gel sizes to be studied; we do so at temperatures below the volume-transition temperature by wetting with water previously dried particles. The resultant swelling is followed by optical video microscopy. We find that the characteristic swelling time scales with the inverse of the particle dimension squared, in agreement with theoretical predictions (ref 2). The proportionality constant is the network diffusion coefficient D, which for the minigels under consideration appears to be in between that of PNIPAM macrogels and the self-diffusion coefficient of water.     

Water flow in poly(N-isopropylacrylamide) gels

Friction between a polymer network of poly(N-isopropylacrylamide) gels and solvent water was investigated. The gel was mechanically constrained in a glass capillary at gelation, and hydrostatic pressure was directly applied to the cross section of the cylinder. The temperature dependence of the flow velocity was extensively measured in the vicinity of the transition temperature for gels with different lengths, l(0), at gelation. As the temperature increased, the friction slightly decreased at the transition point and increased rapidly in the collapsed phase. Although the flow velocity depended on l(0), the friction in the vicinity of the transition point was well scaled by l(0) based on the Hagen-Poiseuille equation for the flux of water flow in a capillary. The results suggested that the assumption that the gel is a bundle of microcapillaries was applicable to the water flow through the hydrogel, which was largely deformed not only by the pressure applied to the solvent but also by the shrinking force caused by the temperature increment. Macroscopic deformation did not affect the friction between the three-dimensional polymer network and water.     

Aggregation behavior of poly(N-isopropylacrylamide) microspheres

Electrophoretic mobility and aggregation in suspensions of three types of microspheres (Ms 1, Ms 2 and Ms 3) are studied at different pH, ionic strengths and temperatures of the medium. Here Ms 1 is a core particle composed of poly(N-isopropylacrylamide-co-styrene). Ms 2 is a core-shell microsphere consisting of Ms 1 as the particle core covered with a surface layer of poly(N-isopropylacrylamide) hydrogel. Ms 3 is also a core-shell microsphere composed of MS-1 covered with a surface layer of poly(N-isopropylacrylamide-co-acrylic acid) hydrogel. The charge density zN and the softness parameter 1/λ of the microspheres were obtained from the electrophoretic mobility data on the basis of an electrokinetic theory of soft particles. It is shown that when zN is large, suspensions of microspheres are always stable, showing no aggregation. When zN is small, the suspensions are stable for large 1/λ but show strong aggregation for small 1/λ.     

Surface-grafted block copolymer brushes with continuous composition gradients of poly(poly(ethylene glycol)-monomethacrylate) and poly(N-isopropylacrylamide)

Surface-grafted block copolymer brushes with continuous composition gradients containing poly(poly(ethylene glycol) monomethacrylate) (P(PEGMA)) and poly(N-isopropylacrylamide) (PNIPAAm) chains were fabricated by integration of the surface-initiated atom transfer radical polymerization (SI-ATRP) and continuous injection method.Three types of copolymer gradients were prepared: (1) a uniform P(PEGMA) layer was block copolymerized with a gradient PNIPAAm layer (PP1);(2) a gradient P(PEGMA) layer was block copo...     

Swelling and deswelling kinetics of poly(N-isopropylacrylamide) gels

Swelling and deswelling kinetics was investigated for three types of cylindrical poly(N-isopropylacrylamide) (PNIPA) gels differing in crosslink density. The temperature dependence curves of the volume of the gel specimens were different from one another. One of the gel specimens was considered as a critical gel showing the continuous volume phase transition. The volume change process of the specimens after a temperature jump was examined. In the deswelling processes with temperature jumps to temperatures higher than 35 degrees C, a phase separation was observed in the gel specimens and the volume change slowed down due to the homogenization after the phase separation. The value of the diffusion constant obtained without the phase separation decreased rapidly as temperature approaches the transition temperature. The rapid decrease for the critical gel indicates the emergence of the critical slowing-down. The value of the critical exponent for the correlation length suggests that the universality class for the volume phase transition of the critical PNIPA gel belongs to the class for the classical theory.     

Synthesis and characterization of surface-cyanofunctionalized poly (N-isopropylacrylamide) latexes

 A series of P[N-isopropylacrylamide (NIPAM)] latexes with different contents of cyano groups were successfully prepared by either seeded or shot-growth polymerizations of an aqueous solution containing acrylonitrile (AN) onto a seed P[NIPAM] latex, respectively, and further characterized by FT-IR, ¹H-NMR, elemental analysis, as well as by quasielastic light scattering (QELS) and scanning electron microscopy (SEM). All prepared surface-cyanofunctionalized P[NIPAM] latexes exhibited the same range of lower critical solution temperature (LCST) as a pure P[NIPAM] latex. The shot polymerization process proved more efficient at yielding cyano derivatized latexes than the seeded polymerization technique. The amount of incorporated cyano groups onto the particles was determined with a good correlation both by ¹H-NMR and elemental analysis. The higher the amount of initially introduced AN monomer in the reaction mixture, the more cyano groups were incorporated onto the particles. The surface of the particles with high content of cyano groups appeared quite rough by SEM in comparison with that of the pure P[NIPAM] particles. Received: 25 February 1998 Accepted: 23 June 1998     

Polystyrene and polystyrene-butadiene latexes stabilized by poly(N-isopropylacrylamide)

Latexes stabilized by poly(N-isopropylacrylamide) (polyNIPAM) were prepared by polymerizing NIPAM in the presence of polystyrene and polystyrene-butadiene latex or by styrene emulsion polymerization in the presence of NIPAM. In 0.01 M CaCl₂ polyNIPAM stabilized latexes exhibited critical flocculation temperatures in the range 32–35°C, which is approximately equal to the lower critical solution temperature of polyNIPAM in water. Partial substitution of NIPAM with some acrylamide (AM) gave higher flocculation temperatures. Coagulation studies with cleaned latex indicated that the polyNIPAM or polyNIPAM-co-AM polymer chains were anchored to the latex particle surfaces.     

Drying dissipative structures of poly(N-isopropylacrylamide) homopolymer

Drying dissipative patterns of the linear-type thermosensitive homopolymer poly(N-isopropylacrylamide) lpNIPAm in deionized aqueous solution and suspension were observed on a cover glass, a watch glass, and a Petri glass dish at 22 and 50 °C, respectively. The size and ζ potential of the globule aggregates of lpNIPAm at 47.5 °C were 140 nm in diameter and ?22 mV from the electrophoretic light-scattering measurements. A single broad ring formed in the inner region (on a cover glass and a watch glass) and near the outside edge (in a glass dish) in the macroscopic drying pattern at 22 °C. On the other hand, two to three kinds of broad rings were observed at the outside edge and inner region at 50 °C. Microscopic drying structures of ordered rings, flickering ordered spoke-lines, and net structures of the agglomerated particles were observed. Formation of the similar-sized agglomerates and their ordered arrays were observed during the course of dryness. These results of lpNIPAm at 50 °C are quite similar to the agglomeration and the ordering of the thermosensitive gel spheres of poly(N-isopropylacrylamide), pNIPAm. The surface structures of the similar-sized agglomerates of lpNIPAm will be similar to those of pNIPAm gel spheres, since the chemical components of the homopolymers and the gels are almost the same. The role of the electrical double layers around the agglomerates and their interaction with the substrates are important for the ordering. Dendritic large aggregates (from 50 to 600 μm in size) formed in the presence of sodium chloride.     

Thermodynamics of aqueous solutions containing poly (N-isopropylacrylamide)

Hydrogels undergo reversible and discontinuous volume changes in response to variation of solution conditions such as solvent composition, temperature, salt concentration, and pH. In this contribution we focus our attention on the experimental and theoretical investigation of these swelling equilibria of aqueous cross-linked poly (N-isopropylacrylamide) solutions as well as on the connected demixing behavior of the linear polymer dissolved in water. For the experimental study of the (liquid + liquid) equilibrium an alternative method based on refractive index measurements is suggested. In order to calculate the swelling behavior a model combining an expression for the Gibbs free energy of mixing with an expression for the elastic network is applied. As a model for the Gibbs free energy of mixing the UNIQUAC-approach and the Koningsveld–Kleintjens model are used. For the elastic network contribution again two different theories, namely the phantom network theory and the affine network theory, were applied. Whereas the type of network theory has only a small influence on the calculation results, the Gibbs free energy of mixing has a large impact. Using the UNIQUAC-approach the swelling equilibria can be correlated close to the experimental data, however, this model predicts a homogeneous mixture for linear polymer chains in water. In contrast to this situation the Koningsveld–Kleintjens model does a good job in calculating the swelling equilibria as well as the demixing curve, however, the adjustable parameter must be changed slightly.