Preparation of styrene/acrylonitrile copolymer microspheres and their composites with metal particles

 Monodispersed poly(styrene-co-acrylonitrile) [P(St-co-AN)] microspheres were prepared by emulsifier-free emulsion copolymerization of St with AN. Fourier transform IR spectroscopy and elemental analysis were used to measure the content of AN in the poly(St-co-AN) microspheres. X-ray photoelectron spectroscopy (XPS) measurements indicated the presence of an AN unit on the surface of the microspheres. The combined results of the elemental analysis and the XPS measurements showed that the copolymer on the surface of the P(St-co-AN) particles was rich in AN compared with that in the interior of the particles. P(St-co-AN)–metal composite particles were prepared by chemical metal deposition. The addition of nickel could improve the distribution of cobalt on surface of the polymer microspheres. The preparation of polymer–bimetal composite particles was tried. Transmission electron microscopy and XRD were used to study the distribution and structure of the deposited metal particles. Received: 30 June 1999/Accepted in revised form: 16 September 1999     

Preparation of silver-poly(acrylamide-co-methacrylic acid) composite microspheres with patterned surface structures

Acrylamide (AM) and methacrylic acid (MAA) copolymer microgels were prepared by a reverse suspension polymerization technique. The microgels were used as templates for the preparation of silver-poly(acrylamide-co-methacrylic acid) [Ag-P(AM-co-MAA)] composite microspheres. The surface structures of the microspheres prepared in this way are characterized by zigzag-like structures. It was found that the composition of the microgels, the nature and dosage of surfactants, the quantity of the metal, and even the reduction methods employed have a significant effect upon the surface structures of the microspheres. X-ray diffraction analysis confirmed that Ag formed during the process is in a crystal state of a face-centered cubic structure.     

Preparation of thermoresponsive core–shell polymeric microspheres and hollow PNIPAM microgels

A reliable and efficient route for preparing thermoresponsive hollow microgels based on cross-linked poly(N-isopropyl acrylamide) (PNIPAM) was developed. Firstly, monodisperse thermoresponsive core–shell microspheres composed of a P(styrene (St)-co-NIPAM) core and a cross-linked PNIPAM shell were prepared by seeded emulsion polymerization using P(St-co-NIPAM) particles as seeds. The size of the P(St-co-NIPAM) core can be conveniently tuned by different dosages of sodium dodecyl sulfate. The thickness of the cross-linked PNIPAM shell can be controlled by varying the dosage of NIPAM in the preparation of PNIAPM shell. Then, hollow PNIPAM microgels were obtained by simply dissolving the P(St-co-NIPAM) core with tetrahydrofuran. The core–shell microspheres and the hollow microgels were characterized by transmission electron microscopy, dynamic light scattering, atomic force microscopy, and Fourier-transform infrared spectroscopy.     

Monodisperse thermosensitive particles prepared by emulsifier-free emulsion polymerization with microwave irradiation

The emulsifier-free emulsion polymerization of styrene (St) and N-isopropylacrylamide (NIPAAm) was successfully carried out with microwave irradiation, and the monodisperse thermoresponsive poly(styrene-co-N-isopropylacrylamide) (poly(St-co-NIPAAm)) particles with diameters in the range 100–130 nm were prepared. The morphology, size and size distribution of the poly(St-co-NIPAAm) particles were characterized by transmission electron microscopy, scanning electron microscopy (SEM) and photon correlation spectroscopy (PCS), respectively. The results showed that poly(St-co-NIPAAm) particles had spherical morphology, and the poly(St-co-NIPAAm) particles prepared by emulsifier-free emulsion polymerization with microwave irradiation were smaller, more uniform than those obtained with conventional heating. The hydrodynamic diameters of poly(St-co-NIPAAm) particles were decreased as the temperature increased from 25 °C to 40 °C, and poly(St-co-NIPAAm) particles collapsed remarkably at 32 °C, which is the lower critical solution temperature of the poly(N-isopropylacrylamide). The morphology of the assembled poly(St-co–NIPAAm) particles was observed by SEM, it was found that monodisperse poly(St-co-NIPAAm) particles could assemble to form the two-dimensional order structures.     

Ag-polymer composite microspheres with patterned surface structures

Novel silver-poly(acrylamide-co-methacrylic acid) [Ag-P(AM-co-MAA)] composite microspheres, in tens of micrometer size range, with patterned surface and core/shell structures were prepared by chemical reduction of Ag₂CrO₄-P(AM-co-MAA) composite microspheres in ethanol. Characterization with various techniques revealed that the chemical composition of the “shell” is dominated by Ag, but the “core” is dominated by the template, P(AM-co-MAA). It was also demonstrated that the surface morphology of the Ag-polymer composite microspheres is similar to that of their precursors and can be controlled to a certain extent by varying the composition of template copolymer, approaches, and amount of Ag₂CrO₄ deposited. This morphology transfer technique is also applicable for other silver salts-polymer composite microspheres. The same silver-polymer composite microspheres with very different morphology have also been prepared by utilizing this technique, but the different precursor microspheres, Ag₃PO₄-P(AM-co-MAA), were used. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Preparation of hollow composite spheres with raspberry‐like structure based on hydrogen‐bonding interaction

The hollow composite spheres with a raspberry‐like structure were prepared by a self‐assemble heterocoagulation based on the inter‐particle hydrogen‐bonding interaction between the amide groups of hollow poly (N,N′‐methylenebisacrylamide‐co‐N‐isopropyl acrylamide) (P(MBA‐co‐NIPAAm)) microspheres and the carboxylic acid groups of poly(ethyleneglycol dimethacrylate‐co‐methacrylic acid) (P(EGDMA‐co‐MAA)) nanoparticles, in which P(EGDMA‐co‐MAA) nanoparticle acted as the corona and the hollow P(MBA‐co‐NIPAAm) microsphere behaved as the core. The control coverage of the corona particles on the surface of hollow core microspheres of P(MBA‐co‐NIPAAm)/P(EGDMA‐co‐MAA) hollow composite sphere was studied in detail through adjustment of the mass ratio between the core and corona particles. The effect of the pH on the stability of the raspberry‐like hollow spheres was investigated. The polymer particles and the resultant heterocoagulated raspberry‐like hollow spheres were characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Copyright © 2008 John Wiley & Sons, Ltd.     

Preparation of styrene/acrylic acid copolymer microspheres: polymerization mechanism and carboxyl group distribution

 Poly(styrene-co-acrylic acid) (St/AA) copolymer microspheres were prepared by batch emulsifier-free emulsion copolymerization of St with AA. The monomer conversion, the morphology and the composition of the particles along the polymerization process were monitored by a gravimetric method, transmission electron microscopy observation and Fourier transform IR analysis, respectively. A shift of the polymerization locus from inside the particles to “outside” the particles in the postnucleation stage was proposed. The results of the study of the distribution of carboxyl groups by a combination of elemental and X-ray photoelectron spectroscopy analyses implied a core/shell structure for the St/AA copolymer microspheres. By chemical metal deposition, nickel particles were formed and deposited on the surface of St/AA microspheres, forming polymer/metal composite particles. Received: 16 February 2001 Accepted: 8 August 2001     

Fabrication of macroporous foam and microspheres of polystyrene by Pickering emulsion polymerization

Poly(styrene-co-methacrylic acid) (PS-co-MAA) particles were synthesized via surfactant-free emulsion polymerization and then used as particulate emulsifiers for preparation of Pickering emulsions. Our results showed that adjusting the solution pH can tune the wettability of PS-co-MAA particles to stabilize either water-in-oil (W/O) or oil-in-water (O/W) Pickering emulsions. Stable W/O emulsions were obtained with PS-co-MAA particles at low pH values due to their better affinity to the dispersed oil phase. In contrast, increasing the pH value significantly changed the stabilizing behavior of the PS-co-MAA particles, leading to the phase inversion and formation of stable O/W emulsions. We found that the oil/water ratio had a significant influence on pH value of the phase inversion. It decreased with decreasing the oil/water ratio, and no phase inversion occurred when the styrene volume fraction reduced to 10 %. Additionally, macroporous polystyrene (PS) foam and PS microspheres were obtained via polymerization of Pickering high internal phase emulsion (Pickering HIPE) and O/W Pickering emulsion, respectively.     

Electrospun microfibrous poly(styrene-alt-maleic anhydride)/poly(styrene-co-maleic anhydride) mats tailored for enzymatic remediation of waters polluted by endocrine disruptors

Novel bicomponent microfibrous mats containing targeted amount of reactive maleic anhydride groups were prepared by electrospinning of mixed solutions of poly(styrene-alt-maleic anhydride) and poly(styrene-co-maleic anhydride). Then, amino-functionalized P(St-alt-MA)/P(St-co-MA) mats were obtained by reaction with p-phenylenediamine. ATR-FTIR and XPS spectroscopy were used to characterize pristine and modified P(St-alt-MA)/P(St-co-MA) mats. On the next step, laccase from Trametes versicolor was covalently attached onto the modified mats; the average amount of immobilized enzyme was 40 ± 0.7 mg/g mat. The catalytic activity of the immobilized enzyme was studied in respect to bisphenol A (BPA) endocrine disruptor. The optimum activity of the immobilized enzyme was reached at maximum flow rate of 1.3 mL/s. After 90 min the BPA concentration was reduced by 60% and the catalytic activity of microfibrous mats remained stable for about 30 successive reuses. In addition, the relative activity of laccase immobilized on the microfibrous mats was displayed in a broader pH range as compared to that of the free one.     

Preparation of P(MBA‐co‐MAA)/Zr(OH)4/P(EGDMA‐co‐MAA)/TiO2 Tetra‐layer Hybrid Microspheres and the Corresponding ZrO2/TiO2 Double‐shelled Hollow Microspheres

Double‐shelled zirconia/titania (ZrO₂/TiO₂) hollow microspheres were prepared by the selective removal of the polymer components via the calcination of the corresponding tetra‐layer poly(N,N′‐methylenebisacryl amide‐co‐methacrylic acid) (P(MBA‐co‐MAA))/Zr(OH)₄/poly(ethyleneglycol dimethacrylate‐co‐methacrylic acid) (P(EGDMA‐co‐MAA))/TiO₂ hybrid microspheres. These tetra‐layer microspheres were synthesized by the combination of the distillation copolymerization of N,N(‐methylenebisacryl amide‐co‐methacrylic acid (MBA) or ethyleneglycol dimethacrylate (EGDMA) crosslinker and methacrylic acid (MAA) for the preparation of polymer core and third‐layer as well as the controlled sol‐gel hydrolysis of inorganic precursors for the construction of zirconium hydroxide (Zr(OH)₄) and titania (TiO₂) layers. The thicknesses of zirconia and titania shell‐layers were conveniently controlled via varying the feed of zirconium n‐butoxide (Zr(OBu)₄) and titanium tetrabutoxide (TBOT) during the sol‐gel hydrolysis, while the sizes of polymer layers were tuned through a multi‐stage distillation precipitation copolymerization. The structure and morphology of the resultant microspheres were characterized by transmission electron microscopy (TEM), X‐ray diffractometer (XRD), X‐ray photoelectronic spectroscopy (XPS), and thermogrametric analysis (TGA).     

Synthesis of P(MBA-co-MAA) microsphere-grafted PAMAM dendrimers and their application as supporters for gold nanoparticles

Poly(N,N′-methylenebisacrylamide-co-acrylic acid) microsphere-supported polyamidoamine (PAMAM) dendrimers up to third generation (G) were grown onto the surface as well as the gel-layer of P(MBA-co-MAA) microspheres by a divergent method. The P(MBA-co-MAA) supported PAMAM dendrimers were used as heterogeneous stabilizers for the gold nanoparticles by an in situ reduction of HAuCl₄ via the efficient coordination interaction between the amino groups of the supported PAMAM dendrimers and the gold atoms. The effects of the generations of the P(MBA-co-MAA) supported PAMAM dendrimer on the loadings and the catalytic activity of the heterogeneous Au nanoparticles were systematically investigated with the reduction of 4-nitrophenol to 4-aminophenol as a model reaction.     

Synthesis of tri-layer hybrid microspheres with magnetic core and functional polymer shell

Tri-layer magnetite/silica/poly(divinylbenzene) (Fe₃O₄/SiO₂/PDVB) core-shell hybrid microspheres were prepared by distillation precipitation polymerization of divinylbenzene (DVB) in the presence of magnetite/3-(methacryloxyl)propyl trimethoxysilane (MPS) modified silica core-shell particles as seeds. The polymerization of DVB was performed in neat acetonitrile with 2,2′-azobisisobutyronitrile (AIBN) as initiator to coat magnetite/MPS-modified silica particles through the capture of DVB oligomers with the aid of vinyl groups on the surface of inorganic seeds in absence of any stabilizer or surfactant. Other magnetite/silica/polymer tri-layer hybrid particles, such as magnetite/silica/poly(ethyleneglycol dimethacrylate) (Fe₃O₄/SiO₂/PEGDMA) and magnetite/silica/poly(ethyleneglycol dimethacrylate-co-methacrylic acid) (Fe₃O₄/SiO₂/P(EGDMA-co-MAA)) with various polarity and functionality, were also prepared by this procedure. Magnetite/silica/poly(N,N′-methylenebisacrylamide-co-methacrylic acid) (Fe₃O₄/SiO₂/P(MBAAm-co-MAA)) were synthesized with unmodified magnetite/silica particles as seeds. The resultant tri-layer hybrid particles were characterized by transmission electron microscopy (TEM), Fourier transform infrared spectra (FT-IR), dynamic light scattering, and vibrating sample magnetometer (VSM).     

Reparation of silica/poly(methacrylic acid)/poly(divinylbenzene-co-methacrylic acid) tri-layer microspheres and the corresponding hollow polymer microspheres with movable silica core

 Hollow poly(divinylbenzene-co-methacrylic acid) (P(DVB-co-MAA)) microspheres were prepared by the selective dissolution of the non-crosslinked poly(methacrylic acid) (PMAA) mid-layer in ethanol from the corresponding silica/PMAA/P(DVB-co-MAA) tri-layer hybrid microspheres, which were afforded by a three-stage reaction. Silica/PMAA core-shell hybrid microspheres were prepared by the second-stage distillation polymerization of methacrylic acid (MAA) via the capture of the oligomers and monomers with the aid of the vinyl groups on the surface of 3-(methacryloxy)propyl trimethoxysilane (MPS)-modified silica core, which was prepared by the Stöber hydrolysis as the first stage reaction. The tri-layer hybrid microspheres were synthesized by the third-stage distillation precipitation copolymerization of functional MAA monomer and divinylbenzene (DVB) crosslinker in presence of silica/PMAA particles as seeds, in which the efficient hydrogen-bonding interaction between the carboxylic acid groups played as a driving force for the construction of monodisperse hybrid microspheres with tri-layer structure. The morphology and the structure of silica core, silica/PMAA core-shell particles, the tri-layer hybrid microspheres and the corresponding hollow polymer microspheres with movable silica cores were characterized by transmission electron microscopy (TEM), Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy (XPS).     

Synthesis and characterization of saccharide‐based latex particles

The synthesis of new polymer colloids based on renewable resources, such as sugar‐derived monomers, is nowadays a matter of interest. These new polymeric particles should be useful in biomedical applications, such as drug delivery, because of their assumed biodegradability. In this work, two new families of polymer latex particles, based on a sugar‐derived monomer, 3‐O‐methacryloyl‐1,2:5,6‐di‐O‐isopropylidene‐α‐D ‐glucofuranose (3‐MDG), were produced and characterized. The syntheses of poly(3‐MDG) crosslinked particles and those obtained by copolymerization with methacrylic acid (MAA), poly(3‐MDG‐co‐MAA) crosslinked particles, were prepared by surfactant‐free emulsion polymerization in a batch reactor. The average particle diameter evolutions, the effect of pH of the dispersion medium on the final average diameters, together with the microscopic and morphological analysis of the particle's surface and inner dominium, were analyzed. Poly(3‐MDG‐co‐EGDMA) stable particles were obtained by adding low amounts of initiator. The surface‐charge density of these particles corresponded to the sulfate groups coming from the initiator. In the second family of latices, poly(3‐MDG‐co‐MAA‐co‐EGDMA) particles, DCP measurements and SEM and TEM observations showed that the sizes and surface characteristics depended on the amounts of MAA and crosslinker used in the reaction mixture. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 443–457, 2006     

Synthesis and characteristics of poly(methacrylic acid‐co‐N‐isopropylacrylamide) thermosensitive composite hollow latex particles and their application as drug carriers

In this work, the poly(methacrylic acid‐co‐N‐isopropylacrylamide) thermosensitive composite hollow latex particles was synthesized by a three‐step reaction. The first step was to synthesize the poly(methyl methacrylate‐co‐methacrylic acid) (poly(MMA‐MAA)) copolymer latex particles by the method of soapless emulsion polymerization. The second step was to polymerize methacrylic acid (MAA), N‐isopropylacrylamide (NIPAAm), and N,N′‐methylenebisacrylamide in the presence of poly(MMA‐MAA) latex particles to form the linear poly(methyl methacrylate‐co‐methacrylic acid)/crosslinking poly(methacrylic acid‐co‐N‐isopropylacrylamide) (poly(MMA‐MAA)/poly(MAA‐NIPAAm)) core–shell latex particles. In the third step, the core–shell latex particles were heated in the presence of ammonia solution to form the crosslinking poly(MAA‐NIPAAm) thermosensitive hollow latex particles. The morphologies of poly(MMA‐MAA)/poly(MAA‐NIPAAm) core–shell latex particles and poly(MAA‐NIPAAm) hollow latex particles were observed. The influences of crosslinking agent and shell composition on the lower critical solution temperature of poly(MMA‐MAA)/poly(MAA‐NIPAAm) core–shell latex particles and poly(MAA‐NIPAAm) hollow latex particles were, respectively, studied. Besides, the poly(MAA‐NIPAAm) thermosensitive hollow latex particles were used as carriers to load with the model drug, caffeine. The effect of various variables on the amount of caffeine loading and the efficiency of caffeine release was investigated. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5203–5214     

Controlled Dispersion of Silver Nanoparticles into the Bulk of Thermosensitive Polymer Microspheres: Tunable Plasmonic Coupling by Temperature Detected by Surface Enhanced Raman Scattering

By in situ reduction of Ag⁺ ions pre‐dispersed inside thermosensitive microspheres of poly[(N‐isopropylacrylamide)‐co‐(methacrylic acid)] (P(NIPAM‐co‐MAA)), a 3D copolymer‐supported network of silver nanoparticles is created and extensively characterized by surface‐enhanced Raman scattering (SERS). The effective dispersion and the suitable density of the silver nanoparticles in the composite microspheres are demonstrated by the thermal‐induced SERS signal and its high reproducibility during thermocycling. When the temperature of the system increases above 32 °C, spatial separation of the silver nanoparticles decreases and the numbers of Ag nanoparticles and P(NIPAM‐co‐MAA) microspheres under illumination spot increase as a result of the shrinkage of the P(NIPAM‐co‐MAA) chains, leading to the ramp of the SERS effect. By means of the high reversibility of the thermosensitive phase transition of the P(NIPAM‐co‐MAA) microspheres, SERS activity of the silver nanoparticle network embedded in the microsphere can be well controlled by thermal‐induced variation of special separation.

     

Metal Nanoparticle/Polymer Hybrid Particles: The Catalytic Activity of Metal Nanoparticles Formed on the Surface of Polymer Particles by UV-Irradiation

Summary: Polymer particles decorated with metal nanoparticles were prepared by UV-irradiation of polystyrene latex particles incorporating polymethylphenylsilane (PS/PMPS) and P[S-co-NIPAM]/PMPS particles (NIPAM: N-isopropyl acrylamide) in the presence of metal salts. The metal nanoparticle/polymer hybrid particles were used as a catalyst for the reduction of 4-nitrophenol with NaBH₄. The Pd- and Ag-P(S-co-NIPAM)/PMPS hybrid particles had larger metal nanoparticles and the lower catalytic activity than those of Pd- and Ag-PS/PMPS, respectively. The surface functional group of the polymer particles affected the formation of the metal nanoparticles and their catalytic activity.     

Metal Nanoparticle/Polymer Hybrid Particles: The Catalytic Activity of Metal Nanoparticles Formed on the Surface of Polymer Particles by UV-Irradiation

Summary: Polymer particles decorated with metal nanoparticles were prepared by UV-irradiation of polystyrene particles incorporating polymethylphenylsilane (PS/PMPS) and P[S-co-NIPAM]/PMPS particles (NIPAM: N-isopropyl acrylamide) in the presence of metal salts. The metal nanoparticle/polymer hybrid particles were used as a catalyst for the reduction of 4-nitrophenol with NaBH₄. The Pd- and Ag-P(S-co-NIPAM)/PMPS hybrid particles had larger metal nanoparticles and the lower catalytic activity than those of Pd- and Ag-PS/PMPS, respectively. The surface functional group of the polymer particles affected the formation of the metal nanoparticles and their catalytic activity.     

Synthesis, characterization, and temperature-dependent colloidal stability of poly(N-isopropylacrylamide)-grafted polystyrene/poly(styrene-co-4-vinylbenzyl N, N-diethyldithiocarbamate) hairy particles

Poly(N-isopropylacrylamide)-grafted polystyrene/poly(styrene-co-4-vinylbenzyl N, N-diethyldithiocarbamate) [PNIPAM-grafted PS/P(St-co-VBDC)] hairy particles were synthesized by photo-polymerizing N-isopropylacrylamide monomer in the presence of PS/P(St-co-VBDC) core particles. Here, the VBDC unit, which was incorporated into the surface of core particles by seeded soap-free emulsion copolymerization, acted as a photo-iniferter. By varying the polymerization conditions, a series of hairy particles having different grafting heights and grafting densities was successfully obtained. The hairy particles exhibited well-defined core/shell morphology. PS/P(St-co-VBDC) formed the core which was surrounded by PNIPAM shell. The determination of critical coagulation concentration (CCC) indicated that the hairy particles were stabilized via both electrostatic and steric mechanisms (i.e., electrosteric mechanism) at a temperature lower than LCST of PNIPAM. However, these particles gave much lower CCCs when heated to the temperature higher than LCST, exhibiting temperature-dependent colloidal stability.     

ABA triblock copolymers with pendant hydroxyl groups prepared by controlled cationic polymerization and their use as delivery carrier for paclitaxel

To improve the hydrophilicity of poly(styrene-b-isobutylene-b-styrene) (SIBS), this study focuses on the synthesis of novel functional ABA triblock copolymer thermoplastic elastomers (TPEs) with polyisobutylene (PIB) as rubbery segments. The precursor poly{(styrene-co-4-[2-(tert-butyldimethylsiloxy) ethyl]styrene)-b-isobutylene-b-(styrene-co-4-[2-(tert-butyldimethylsiloxy)ethyl]styrene)}(P(St-co-TBDMES)-PIB-P(St-co-TBDMES)) triblock copolymer was first synthesized by living sequential cationic copolymerization of isobutylene (IB) with styrene (St) and 4-[2-(tert-butyldimethylsiloxy) ethyl]styrene (TBDMES) using 1,4-di(2-chloro-2-propyl)benzene (DiCumCl)/titanium tetrachloride (TiCl₄)/2,6-di-tert-butylpyridine (DtBP) as the initiating system. Then, P(St-co-TBDMES)-PIB-P(St-co-TBDMES) was hydrolyzed in the presence of tetra-butylammonium fluoride to yield poly{[styrene-co-4-(2-hydroxyethyl)styrene]-bisobutylene-b-[styrene-co-4-(2-hydroxyethyl)styrene]} (P(St-co-HOES)-PIB-P(St-co-HOES)) with pendant hydroxyl groups. P(St-co-HOES)-PIB-P(St-co-HOES) used as the paclitaxel carrier was also investigated in this study. Comparing with SIBS, P(St-co-HOES)-PIB-P(St-co-HOES) has exhibited better compatibility with paclitaxel and higher release rate.