Effect of solvent on the crystal structures of copper(II) complexes based on 4′-(4-methoxyphenyl)-2,2′:6′,2″-terpyridine and 4′-(3-chlorophenyl)-2,2′:6′,2″-terpyridine

Four homoleptic copper(II) complexes, [Cu(Meophtpy)₂](ClO₄)₂ (Meophtpy = 4′-(4-methoxylphenyl)- 2,2′:6′,2″-terpyridine) (I), [Cu(Meophtpy)₂](ClO₄)₂ · 2H₂O (II), [Cu₂(m-Clphtpy)₄](ClO₄)₄ (m-ClPhtpy = 4′-(3-chlorophenyl)-2,2′:6′,2″-terpyridine) (III), and [Cu₂(m-ClPhtpy)₄](ClO₄)₄ (IV) have been synthesized by hydrothermal methods and characterized by IR, elemental analysis and single crystal X-ray diffraction (CIF files CCDC nos. 963375 (I), 885457 (II), 963377 (III), and 963376 (IV)). Complex II is a polymorph of I and complex IV is a polymorph of III. All these complexes are obtained with 95% ethanol solution or 50% ethanol solution and the solvent control on the crystallization are obviously found. In all complexes, the face-to-face interactions between pyridyl rings or phenyl rings facilitate the construction of 3D network in the crystal in addition to hydrogen bonds. The fluorescence properties of these complexes have been investigated.     

Effect of a rigid,non-polar solute on the dielectric anisotropy,the splay and bend elastic constants,and on the rotational viscosity coefficient of 4-4′-n-heptylcyanobiphenyl

The effect of mixing a rigid, non-polar, non-mesogenic solute, biphenyl (C₆H₅-C₆H₅), in the nematic solvent 7CB (4,4′-n-heptylcyanobiphenyl) is investigated. The solute is found to reduce the nematic order and a two-phase region appears. We report measurements of the transition temperatures, dielectric anisotropy, and splay and bend elastic constants, as well as the rotational viscosity coefficient by the method of electric field-induced Fréedericksz transition for biphenyl concentrations up to 8.0%.     

Influence of solvent on the photochemistry of 4,4′-diaminostilbene

Studies on the fluorescence and direct trans-cis photoisomerization of 4,4′-diaminostilbene in a variety of solvents, indicate a marked effect of solvent polarity. With increasing solvent polarity there is a decrease in fluorescence yield and lifetime and an increase in the rate of photoisomerization. The results are discussed in terms of a polarity effect on the energy barrier to photoisomerization.     

Influence of 4-[(E)-(4′-Heptyloxyphenyl)diazenyl]phthalonitrile on the Properties of a Cyanobiphenyl Liquid Crystal Mixture

Russian Journal of General Chemistry - The mesomorphic properties of 4-[(E)-(4′-heptyloxyphenyl)diazenyl]phthalonitrile (7O-AB-CN2) were studied by polarization microscopy and DSC method....     

Investigations in the region of 2,3′-biquinolyl 4. Alkylation of the dianion of 2,3′-biquinolyl

With alkyl chlorides and alkyl phenyl ethers the dianion of 2,3-biquinolyl forms the products from alkylation at position 4. Their treatment with alkyl halides or water gives 1, 4-dialkyl-1, 4-dihydro-2,3-biquinolyls or 4-alkyl-1,4-dihydro-2,3-biquinolyls respectively.For communication 3, see [1].Stavropol State University, Stavropol, Russia 355009. Russian Chemical Technology University, Moscow 125190. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 9, pp. 1214–1217, September, 1998.     

First Total Syntheses of 4′-0-Geranylisoliquiritigenin And 4′-O-Geranylnarigenin

The title compounds, 4'-0-geranylisoliquiritigenin and 4'-0-geranylnaringenin isolated from Millettia ferruginea and Borania coerulescens respectively, were first synthesized starting from geranyl bromide, 4-hydroxybenzaldehyde and O-hydroxy acetophenones by the condensation reaction and demethoxymethylation as key steps.     

Studies on the Cyclisation of 4-[2′-Cyclohexenyl]-3-hydroxy[1]benzopyran-2-one

The bicyclic coumarin derivative-1, 3 propano-2-bromo-1,2-dihydro-3H-pyrano [2, 3-c] [1]benzo-pyran-5-one (8) was synthesised by a sequence of reaction viz. acetylation of 4-[2′-cyclohexenyl] -3-hydroxy [1] benzopyran-2-one (4), addition of bromine to cyclohexenyl double bond and treating the resulting acetyldi-bromo derivative (7) with 4% alcoholic KOH. Benzofuro [2, 3-c] [1] -benzopyran-6-one (10) was synthesised from 4 via oxymercuration with mercuric acetate in methanol followed by dehydrogenative damercuration with Pd-C in refluxing diphenyl ether.     

IR spectroscopic study of the conformational lability of 4′-ethyl-4-cyanobiphenyl

The conformational lability of 4-ethyl-4-cyanobiphenyl molecules in solid crystal (SC) and isotropic liquid (IL) states was investigated by IR spectroscopic techniques (experiment and theory). IR absorption spectra were measured at 28°C–95°C in the frequency range 400 cm^–1–4000 cm^–1. Spectrum simulation was performed using the fragment method with allowance for the conformational fluctuations of molecules. The experimental and calculated spectra were compared and analyzed, and it was shown that in the IL, the samples are mixtures of conformers. The temperature changes in the spectra in the stated range are caused by the conformational lability of molecules.Original Russian Text Copyright © 2004 by L. M. Babkov, I. I. Gnatyuk, G. A. Puchkovskaya, and S. V. TrukhachevTranslated from Zhurnal Strukturnoi Khimii, Vol. 45, No. 3, pp. 398–405, May–June, 2004.     

Crystal Structure of infin; 2[Cu2I2(μ-4-4′-bipyridine)] and Investigations on the Thermal Decomposition of CuX-4,4′-bipyridine Coordination Polymers

Summary.  The inorganic-organic coordination polymer _infin; ²[Cu₂I₂(μ-4-4′-bipyridine)] was prepared by the reaction of Cu(I)I and 4,4^′-bipyridine in acetonitrile. Its structure consists of staircase-like CuX double chains which are connected to sheets by the 4,4^′-bipyridine ligands. The thermal decomposition of the corresponding 1:1 copper(I) halide-4,4^′-bipyridine compounds _infin; ²[CuX(μ-4-4′-bipyridine)] (X = Cl, Br, I) was investigated using simultaneous difference thermal analysis and thermogravimetry (DTA-TG), thermomicroscopy, and temperature resolved X-ray powder diffraction in air or argon. Upon heating _infin; ²[CuX(μ-4-4′-bipyridine)], several changes in sample mass are observed which correspond to a stepwise loss of the organic ligands. Temperature-resolved X-ray powder diffraction proves that _infin; ²[CuX(μ-4-4′-bipyridine)] transforms to _infin; ²[Cu₂ X ₂(μ-4-4′-bipyridine)] during the decomposition; the latter looses the remaining ligands when heated further, forming the corresponding copper(I)halides. When the experiments were performed under an argon atmosphere, the 2:1 coordination polymers were obtained as phase-pure compounds. Received March 1, 2001. Accepted April 11, 2001     

Study of the inhibiting activity of 4-(4′-hydroxyphenyl)-and 4-(2′-hydroxy-5′-methylphenyl)methyl cyclohexane carboxylic acid ethyl esters in photooxidation of petroleum phosphors

4-(4′-hydroxyphenyl)-and 4-(2′-Hydroxy-5′-methylphenyl)methyl cyclohexane carboxylic acid ethyl esters were synthesized from phenol and para-cresol. The structure of the esters synthesized was studied, and their inhibiting activity in photooxidation of a petroleum phosphor produced from the heavy pyrolysis tar fraction was examined.     

The cavity size effect on the fluorescence properties of 4′-dimethylaminoacetophenone complexed with cyclodextrins

Fluorescence properties of excited 4^′-dimethylaminoacetophenone (DMAAP) complexed with α-, β-, and γ-cyclodextrins (CDs) were studied by means of steady state and time-resolved laser spectroscopy. The 1:2 DMAAP–α-CD and 1:1 DMAAP–β-CD complexes exhibited dual fluorescence in neutral aqueous solutions while only the fluorescence from the locally excited state was observed in the case of DMAAP complexed with γ-CD. The CD cavity size effect on the excited state dynamics of DMAAP–CD complexes was further discussed. It revealed that polarity effect introduced by the hydrophobic cavity is more important in controlling of the photochemistry of DMAAP than the restriction of molecular motion inside the CD cavity.     

Understanding the role of flexible 4′-functionalized polyethylene glycoxy chains on the behavior of platinum(II) (4′-(ethylene glycoxy)-2,2′:6′,2′′-terpyridine: a kinetic and a mechanistic study

The ligand substitution kinetics of 4′-functionalized mononuclear Pt(II) (4′-(ethylene glycoxy)-2,2′:6′,2′′-terpyridine complexes, [Pt(nY-tpy)Cl)Cl] (where Y = ethylene glycoxy, n = number of ethylene, glycoxy units = 1, 2, 3, and 4, and tpy = 2,2′:6′,2′′-terpyridine), with thiourea, 1,3-dimethyl-2-thiourea, 1,1,3,3-tetramethyl-2-thiourea, and iodide were investigated under pseudo-first-order conditions as a function of concentration and temperature by conventional stopped-flow technique. The observed first-order rate constants followed the simple rate law k_obs = k₂[Nu]. The data obtained show that the ethylene glycoxy pendant, trans to the leaving group, acts as a σ-donor into the terpyridine ligand and is effective only up to n = 1, beyond which the substitution reactivity of the complexes are controlled by the steric influence of the appended ethylene glycoxy pendant units, which decreases with increase in the number of ethylene glycoxy units. The activation parameters obtained support an associative mechanism, where bond formation in the transition state is favored. The observed reactivity trends were supported by density functional theory calculations.     

Effect of thermal curing on the properties of thin films based on benzophenonetetracarboxylic dianhydride and 4,4′-diamino-3,3′-dimethyldiphenylmethane

The processing of polyimide films from polyamidic acid solutions involves the simultaeous loss of solvent and chemical conversion, and may imply structural reorganization such as orientation or crystallization. The effect of thermal treatment on the thermal, mechanical and dielectric properties of polymer films based on benzophenonetetracarboxylic dianhydride and 4,4’-diamino-3,3’-dimethyl diphenylmethane have been investigated. The thermal treatment of polyamidic acid at different temperatures led to compounds with different degree of imidization; it turned out that the imidization process took place with high speed until 240 °C and then remained constant. The dynamic mechanical analysis (DMA), contact angles, and dielectric measurements revealed that the storage modulus and contact angles increased with increasing of curing temperature while the dielectric constant decreased.     

The influence of the nature of the solvent on the crystal structure and the character of formation of hydrogen bonds inN′-(5-nitrofurfurylidene)isonicotinehydrazide

N(5-Nitrofurfurylidene)isonicotinehydrazide (1) was synthesized in the reaction of nicotinic acid hydrazide with 5-nitrofurfurol in anhydrous or aqueous ethanol. Crystals of different shape and color were obtained depending on the conditions of synthesis and the nature of the solvent. As was established by IR spectroscopy, compound1 in the crystalline state forms solvates of various types. An X-ray study of two different crystals, one obtained by recrystallization from methanol (1a), and the other obtained from aqueous acetic acid (1b), was performed. In the crystal structure of1a intermolecular hydrogen bonds (IMHB) of the NH...N(Py) type occur; the crystals1b are built of solvates with one molecule of acetic acid in which the components are bonded by the IMHB (Ac)O-H..N(Py). The solvates are linked in an infinite chain by the amidohydrate IMHB C=O...W...H-N.Translated fromlzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 2263–2268, September, 1996.