Au nanoparticles stabilised by PEGylated low generation PAMAM dendrimers: design, characterisation and properties

The preparation and characterisation of a series of well-defined low generation (poly)amidoamine (PAMAM)-based dendrimers with end-grafted ethylene glycol ether moieties of type N(CH(2)CH(2)C(O)NHCH(2)CH(2)NR(2))(3) (3a, R=CH(2)CH(2)C(O)OCH(2)CH(2)OCH(3); 3b, R=CH(2)CH(2)C(O)O(CH(2)CH(2)O)(2)C(2)H(5); 3c, R=CH(2)CH(2)C(O)O(CH(2)CH(2)O)(9)CH(3)), [CH(2)N(CH(2)CH(2)C(O)NHCH(2)CH(2)NR(2))(2)](2) (4, R=CH(2)CH(2)C(O)O(CH(2)CH(2)O)(2)C(2)H(5)) and (R(2)NCH(2)CH(2)NHC(O)CH(2)CH(2))N[CH(2)CH(2)N(CH(2)CH(2)C(O)NHCH(2)CH(2)NR(2))(2)](2) (5a, R=CH(2)CH(2)C(O)OCH(2)CH(2)OCH(3); 5b, R=CH(2)CH(2)C(O)O(CH(2)CH(2)O)(2)C(2)H(5); 5c, R=CH(2)CH(2)C(O)O(CH(2)CH(2)O)(9)CH(3)) and their application for the stabilisation of gold nanoparticles (Au NPs) is described. These dendrimers were prepared by a consecutive divergent synthesis methodology including Michael addition and amidation cycles. For comparison, amidoamine related model compounds N(C(3)H(7))R(2) (1, R=CH(2)CH(2)C(O)O(CH(2)CH(2)O)(2)C(2)H(5)) and [CH(2)NR(2)](2) (2, R=CH(2)CH(2)C(O)O(CH(2)CH(2)O)(2)C(2)H(5)) were also synthesised to estimate the minimum required donating capabilities of the stabiliser. Loading the appropriate dendritic templates with H[AuCl(4)] (12) and subsequent reduction of the respective metallodendrimers with Na[BH(4)] produced dendrimer encapsulated gold colloids. The dendrimeric scaffold, the length of the ethylene glycols, the adjusted stabilizer:gold ratio and the duration of reaction time affects the average Au particle diameter in a range of 4.0 (±0.9) to 58.5 (±14.5) nm. Furthermore, depending on the nature of the stabiliser, nanoparticles were formed having spherical or multiple morphologies. Characterisation by transmission electron microscopy (TEM), dynamic light scattering (DLS), UV/vis, and IR spectroscopy revealed that Au NPs are formed and protected inside the dendrimer scaffold.     

双冠醚化合物的合成研究 III. 一类新的双冠醚的合成

邻苯二酚、3,5-二叔丁基邻苯二酚分别与1,5-二氯-3-氧(杂)戊烷在碱性条件下反应, 合成了开链冠醚化合物(1a-b)。1a-b与环氧氯丙烷在氢氧化钠正丁醇中缩合, 得到相应的6-羟基二苯并-16-冠-5(2a-b)。化合物2a-b分虽与丁二酰氯、壬二酰氯在无水苯中反应, 生成了两种新的酯型双冠醚化合物3a-b; 2a-b分别与1,3-二溴丙烷、1,4-二溴丁烷、1,5-二溴戊烷、1,8-二氯-3,6-二氧(杂)辛烷及1,11-二氯-3,6,9-三氧(杂)十一烷在无水二氧六环中反应, 得到了四种新的醚型双冠醚化合物4a-e。     

Tunable N-substitution in zwitterionic benzoquinonemonoimine derivatives: metal coordination, tandemlike synthesis of zwitterionic metal complexes, and supramolecular structures

Full details on a very efficient transamination reaction for the synthesis of zwitterionic N,N-dialkyl-2-amino-5-alcoholate-1,4-benzoquinonemonoiminium derivatives [C6H2(=NHR)2(=O)2] 5-16 are reported. The molecular structures of zwitterions 5 (R=CH3) in 5.H2O, 13 (R=CH2CH2OMe), 15 (R=CH2CH2NMe2), and of the parent, unsubstituted system [C6H2(=NH2)2(=O)2] 4 in 4.H2O have been established by single-crystal X-ray diffraction. This one-pot preparation can be carried out in water, MeOH, or EtOH and allows access to new zwitterions with N-substituents bearing functionalities such as -OMe (13), -OH (9-12), NR1R2 with R1 = or not equal R2 (14-16) or an alkene (8), leading to a rich coordination chemistry and allowing fine-tuning of the supramolecular arrangements in the solid state. As previously described for 15, which reacted with Zn(acac)2 to afford the octahedral Zn(II) complex [Zn[C6H2(NCH2CH2NMe2)O(O)(NHCH2CH2NMe2)]2] (20), ligands 13 and 16 with coordinating "arms" afforded with Zn(acac)2 the 2:1 adducts [Zn[C6H2(NCH2CH2X)O(=O)(NHCH2CH2NX)]2] 19 (X=OMe) and 21 (X=NHEt), with N2O4 and N4O2 donor sets around the octahedral Zn(II) center, respectively. Furthermore, zwitterions 15 and 16 reacted with ZnCl2 to give the stable, crystallographically characterized Zn(II) zwitterionic complexes [ZnCl2[C6H2(NCH2CH2NR1R2)O(=O)(NHCH2CH2NHR1R2)]] 22 (R1=R2=Me) and 23 (R1=Et, R2=H) by means of an unprecedented, tandemlike synthesis in which 1) the two pendant amino groups of the organic benzoquinonemonoimine zwitterionic precursor favor metal coordination and proton transfer and 2) the saturated linker prevents pi-conjugation between the charges. The nature of the structural arrangements in the solid state for both inorganic (20, 22, 23) and organic (5, 9, 13, and 15) molecules is determined by subtle variations in the nature of the N-substituent on the zwitterion precursor.     

Structural diversity in bishydroxylamine complexes of gallium

Reactions of bishydroxylamines of the type HON(R)CH2CH2N(R)OH (R=Me, tBu) with trimethyl- and triisopropylgallium gave bicyclic metalla cages of the formula R'2GaO(R)NCH2CH2N(R)OGaR'2 [R'=Me, R=Me (), tBu (); R'=iPr, R=Me (), tBu ()] with six-membered Ga2O2N2-rings. While the complexes show the same core constitution in the solid state, NMR spectra reveal the steric influence of the isopropyl substituent of the compounds / on its behaviour in solution. The reaction of the sterically more demanding substituted tri-tert-butylgallium with HON(Me)CH2CH2N(Me)OH yielded a heterodimeric complex O'-[HON(Me)CH2CH2NH(Me)O(tBu2Ga)]-cyclo-(tBu2Ga)-O,N'-[ON(Me)CH2CH2N(Me)O] () with two gallium atoms of different surrounding and two different bishydroxylamine ligands, one doubly deprotonated and one protonated, but at one end in its tautomeric aminoxide form. Further condensation of was observed to give a tricyclic compound cyclo-[(tBuGa)ON(Me)CH2CH2N(Me)O]2 () with a central Ga2O2N2 ring resulting from two Ga-N donor-acceptor bonds.     

Addition products of a P(III)-isothiocyanate to dialkyl acetylenedicarboxylates: a spirocyclic phosphinimine and a triphosphorus heterocycle with tetra- and penta-coordinate phosphorus

Treatment of the P(III) isothiocyanate CH2[6-t-Bu-4-Me-C6H2O]2PNCS (1) with dimethyl acetylenedicarboxylate (DMAD) or diethyl acetylenedicarboxylate (DEAD) yields the spirocyclic phosphinimines CH2[6-t-Bu-4-Me-C6H2O]2P[NC(S)C(CO2R)C(CO2R)][R=Me (2), Et (3)], in a reaction unlike those of organic isocyanates. From the reaction of 1 with DEAD, a second product, the triphosphorus compound 5, with the composition [2x1+3] but with a completely reorganized structure {CH2[6-t-Bu-4-Me-C6H2O]2P=C(CO2Et)C(CO2Et)=CN-}{CH2[6-t-Bu-4-Me-C6H2O]2P(NCS)}-SC=N-P(S)[(OC6H2-6-t-Bu-4-Me)2CH2] with tetra- and penta-coordinate phosphorus, is also isolated. Structure and reactivity of these compounds are discussed. Addition of 2,2,2-trifluoroethanol to 2 or 3 leads to the pentacoordinate phosphorus compounds [CH2(6-t-Bu-4-Me-C6H2O)2P(OCH2CF3){C(CO2R)C(CO2R)-C(S)-NH-}][R=Me (6), Et (7)]. The phosphonate [CH2(6-t-Bu-4-Me-C6H2O)2P(O)C(CO2Et)=C(CO2Et)-C(S)-NH2] (8) is obtained by evaporating a solution of 7 in open air.     

Primary and secondary phosphine complexes of iron porphyrins and ruthenium phthalocyanine: synthesis, structure, and P-H bond functionalization

Reduction of [Fe(III)(Por)Cl] (Por = porphyrinato dianion) with Na2S2O4 followed by reaction with excess PH2Ph, PH2Ad, or PHPh2 afforded [Fe(II)(F20-TPP)(PH2Ph)2] (1a), [Fe(II)(F20-TPP)(PH2Ad)2] (1b), [Fe(II)(F20-TPP)(PHPh2)2] (2a), and [Fe(II)(2,6-Cl2TPP)(PHPh2)2] (2b). Reaction of [Ru(II)(Pc)(DMSO)2] (Pc = phthalocyaninato dianion) with PH2Ph or PHPh2 gave [Ru(II)(Pc)(PH2Ph)2] (3a) and [Ru(II)(Pc)(PHPh2)2] (4). [Ru(II)(Pc)(PH2Ad)2] (3b) and [Ru(II)(Pc)(PH2Bu(t))2] (3c) were isolated by treating a mixture of [Ru(II)(Pc)(DMSO)2] and O=PCl2Ad or PCl2Bu(t) with LiAlH4. Hydrophosphination of CH2=CHR (R = CO2Et, CN) with [Ru(II)(F20-TPP)(PH2Ph)2] or [Ru(II)(F20-TPP)(PHPh2)2] in the presence of (t)BuOK led to the isolation of [Ru(II)(F20-TPP)(P(CH2CH2R)2Ph)2] (R = CO2Et, 5a; CN, 5b) and [Ru(II)(F20-TPP)(P(CH2CH2R)Ph2)2] (R = CO2Et, 6a; CN, 6b). Similar reaction of 3a with CH2=CHCN or MeI gave [Ru(II)(Pc)(P(CH2CH2CN)2Ph)2] (7) or [Ru(II)(Pc)(PMe2Ph)2] (8). The reactions of 4 with CH2=CHR (R = CO2Et, CN, C(O)Me, P(O)(OEt)2, S(O)2Ph), CH2=C(Me)CO2Me, CH(CO2Me)=CHCO2Me, MeI, BnCl, and RBr (R = (n)Bu, CH2=CHCH2, MeC[triple bond]CCH2, HC[triple bond]CCH2) in the presence of (t)BuOK afforded [Ru(II)(Pc)(P(CH2CH2R)Ph2)2] (R = CO2Et, 9a; CN, 9b; C(O)Me, 9c; P(O)(OEt)2, 9d; S(O)2Ph, 9e), [Ru(II)(Pc)(P(CH2CH(Me)CO2Me)Ph2)2] (9f), [Ru(II)(Pc)(P(CH(CO2Me)CH2CO2Me)Ph2)2] (9g), and [Ru(II)(Pc)(PRPh2)2] (R = Me, 10a; Bu(n), 10b; Bn, 10c; CH2CH=CH2, 10d; CH2C[triple bond]CMe, 10e; CH=C=CH2, 10f). X-ray crystal structure determinations revealed Fe-P distances of 2.2597(9) (1a) and 2.309(2) A (2bx 2 CH2Cl2) and Ru-P distances of 2.3707(13) (3b), 2.373(2) (3c), 2.3478(11) (4), and 2.3754(10) A (5b x 2 CH2Cl2). Both the crystal structures of 3b and 4 feature intermolecular C-H...pi interactions, which link the molecules into 3D and 2D networks, respectively.     

Functionalized carbosilane dendritic species as soluble supports in organic synthesis

A new methodology, which is compatible with the use of reactive organometallic reagents, has been developed for the use of carbosilane dendrimers as soluble supports in organic synthesis. Hydroxy-functionalized dendritic carbosilanes Si[CH2CH2CH2SiMe2(C6H4CH(R)OH)]4 (G0-OH, R = H or (S)-Me) and Si[CH2CH2CH2Si[CH2CH2CH2SiMe2(C6H4CH(R)OH)]3]4 (G1-OH, R = H or (S)-Me) were prepared and subsequently converted into the esters Si[CH2CH2CH2SiMe2(C6H4CH(R)OC(O)CH2Ph)]4 (R = H or (S)-Me) and Si[CH2CH2CH2Si[CH2CH2CH2SiMe2(C6H4CH(R)OC(O)CH2C6H4 R')]3]4 (R = H and R' = H or R = (S)-Me and R' = H or R = H and R' = Br). As an example the latter compound was functionalized under Suzuki conditions. The functionalized carboxylic acid was obtained in high yield after cleavage from the dendritic support. Moreover, the ester functionalized dendrimers were converted to the corresponding zinc enolates followed by a condensation reaction with an imine to a beta-lactam in excellent yield and purity. Furthermore, it was demonstrated that a small combinatorial library of beta-lactams could be prepared starting from a carbosilane dendrimer functionalized with different ester moieties. These results show that carbosilane dendrimers can be applied as soluble substrate carriers for the generation of low molecular weight organic molecules. In combination with nanofiltration techniques, separation and recycling of the dendrimers can be realized.     

Synthesis, characterization and ethylene reactivity of 2-diphenylphosphanylbenzamido nickel complexes

Addition of primary amines to N-[2-(diphenylphosphanyl)benzoyloxy]succinimide affords 2-diphenylphosphanylbenzamides, Ph2PC6H4C(O)NHR (R = C(CH3)3, 3; R = H, 4; R = CH2CH2CH3, 5; R = CH(CH3)2, 6). Addition of NiCl(eta3-CH2C6H5)(PMe3) to the deprotonated potassium salts of the amides and subsequent treatment of two equivalents of B(C6F5)3 to the resulting products furnishes eta3-benzyl zwitterionic nickel(II) complexes, [Ph2PC6H4C(O)NR-kappa2N,P]Ni(eta3-CH2C6H5) (R = C6H5, 9; R = C(CH3)3, 10; R = H, 11; R = CH2CH2CH3, 12; R = CH(CH3)2, 13). Solid structures of 9, 11, 13 and the intermediate eta1-benzyl nickel(II) complexes, [Ph2PC6H4C(O)NR-kappa2N,P]Ni(eta1-CH2C6H5)(PMe3) (R = C6H5, 7; R = C(CH3)3, 8) were determined by X-ray crystallography. When ethylene is added to the eta3-benzyl zwitterionic nickel(II) complexes, butene is obtained by the complexes 9-12 but complex 13 provides very high molecular-weight branched polyethylene (Mw, approximately 1300000) with excellent activity (up to 5200 kg mol-1 h-1 at 100 psi gauge).     

Unusual neutral ligand coordination to arsenic and antimony trifluoride

The preparations and spectroscopic characterisation of the hydrolytically unstable As(III) complexes, [AsF(3)(OPR(3))(2)] (R = Me or Ph) and [AsF(3){Me(2)P(O)CH(2)P(O)Me(2)}] are described and represent the first examples of complexes of AsF(3) with neutral ligands. The crystal structure of [AsF(3){Me(2)P(O)CH(2)P(O)Me(2)}] contains dimers with bridging diphosphine dioxide, but there are also long contacts between the dimers to neighbouring phosphine oxide groups, completing a very distorted six-coordination at arsenic and producing a weakly associated polymer structure. The reaction of AsF(3) with OAsPh(3) affords Ph(3)AsF(2), and no arsine oxide complex was formed. Reaction of SbF(3) with OER(3) (R = Me or Ph, E = P or As), Me(2)P(O)CH(2)P(O)Me(2) and Ph(2)P(O)(CH(2))(n)P(O)Ph(2) (n = 1 or 2) in MeOH produces [SbF(3)(OER(3))(2)], [SbF(3){Me(2)P(O)CH(2)P(O)Me(2)}] and [SbF(3){Ph(2)P(O)(CH(2))(n)P(O)Ph(2)}] respectively. The X-ray structures reveal that the complexes contain square pyramidal SbF(3)O(2) cores with apical F and cis disposed pnictogen oxides. However, whilst [SbF(3)(OER(3))(2)] (R = Ph: E = P or As; R = Me: E = As) and [SbF(3){Ph(2)P(O)CH(2)P(O)Ph(2)}] are monomeric, [SbF(3){Me(2)P(O)CH(2)P(O)Me(2)}] is a dimer with bridging diphosphine dioxides producing a twelve-membered ring, and [SbF(3){Ph(2)P(O)(CH(2))(2)P(O)Ph(2)}] is a chain polymer with diphosphine dioxide bridges. In the OAsR(3) reactions with SbF(3), R(3)AsF(2) are also formed. Notably the Sb-O(P) bonds are shorter than As-O(P), despite the covalent radii (As < Sb), consistent with very weak coordination of the AsF(3). IR and multinuclear ((1)H, (19)F and (31)P) NMR data are reported and discussed. BiF(3) does not react with pnictogen oxide ligands under similar conditions and halide exchange of bismuth chloro complexes with Me(3)SnF gave BiF(3).     

Syntheses, structures, and reactivity of new pentamethylcyclopentadienyl-rhodium(III) and -iridium(III) 4-acyl-5-pyrazolonate complexes

New [CpM(Q)Cl] complexes (M = Rh or Ir, Cp = pentamethylcyclopentadienyl, HQ = 1-phenyl-3-methyl-4R(C=O)-pyrazol-5-one in general, in detail HQ(Me), R = CH(3); HQ(Et), R = CH(2)CH(3); HQ(Piv), R = CH(2)-C(CH(3))(3); HQ(Bn), R = CH(2)-(C(6)H(5)); HQ(S), R = CH-(C(6)H(5))(2)) have been synthesized from the reaction of [CpMCl(2)](2) with the sodium salt, NaQ, of the appropriate HQ proligand. Crystal structure determinations for a representative selection of these [CpM(Q)Cl] compounds show a pseudo-octahedral metal environment with the Q ligand bonded in the O,O'-chelating form. In each case, two enantiomers (S(M)) and (R(M)) arise, differing only in the metal chirality. The reaction of [CpRh(Q(Bn))Cl] with MgCH(3)Br produces only halide exchange with the formation of [CpRh(Q(Bn))Br]. The [CpRh(Q)Cl] complexes react with PPh(3) in dichloromethane yielding the adducts CpRh(Q)Cl/PPh(3) (1:1) which exist in solution in two different isomeric forms. The interaction of [CpRh(Q(Me))Cl] with AgNO(3) in MeCN allows generation of [CpRh(Q(Me))(MeCN)]NO(3).3H(2)O, whereas the reaction of [CpRh(Q(Me))Cl] with AgClO(4) in the same solvent yields both [CpRh(Q(Me))(H(2)O)]ClO(4) and [CpRh(Cl)(H(2)O)(2)]ClO(4); the H(2)O molecules derive from the not-rigorously anhydrous solvents or silver salts.     

有机磷化合物研究XVIII α-砜基膦酸酯的合成和反应

本文报道α-砜基碳阴离子和磷酰氯的反应,提供了合成α-砜基膦酸酯和α,β-不饱和砜的新方法,此方法具有原料易得、反应步骤少、得率较高等优点.还讨论了α-芳砜基膦酸酯的质谱.     

Synthesis, characterisation and molecular structure of Re(III) 2-oxacyclocarbenes stabilised by a benzoyldiazenido ligand

A family of new Fischer-type rhenium(III) benzoyldiazenido-2-oxacyclocarbenes of formula [(ReCl2[eta1-N2C(O)Ph][=C(CH2)nCH(R)O](PPh3)2][n = 2, R = H (2), R = Me (3); n = 3, R = H (4), R = Me (5)] have been prepared by reaction of [ReCl2[eta2-N2C(Ph)O](PPh3)2] (1) with omega-alkynols, such as 3-butyn-1-ol, 4-pentyn-1-ol, 4-pentyn-2-ol, 5-hexyn-2-ol in refluxing THF. The correct formulation of the carbene derivatives 2-5 has been unambiguously determined in solution by NMR analysis and confirmed for compounds 2-4 by X-ray diffraction methods in the solid state. All complexes are octahedral with the benzoyldiazenido ligand, Re[N2C(O)Ph], adopting a "single bent" conformation. The coordination basal plane is completed by an oxacyclocarbene ligand and two chlorine atoms. Two triphenylphosphines in trans positions with respect to each other complete the octahedral geometry around rhenium. The reactivity of 1 towards different alkynes and alkenes including propargyl- and allylamine has been also studied. With propargyl amine, monosubstituted or bisubstituted complexes, [(ReCl2[eta1-N2C(O)Ph][eta1-NH2CH2C triple bond CH]n(PPh3)(3-n)][n= 1 (6); n = 2 (7)], have been isolated depending on the reaction conditions. In contrast, the reaction with allylamine gave only the disubstituted complex [(ReCl2[eta1-N2C(O)Ph][eta1-NH2CH2CH=CH2]2(PPh3)] (8). The molecular structure of the monosubstituted adduct has been confirmed by X-ray analysis in the solid state.     

Reactivity of the isolable disilene R*PhSi=SiPhR* (R* = SitBu3)

The disilene R*PhSi=SiPhR* (R* = supersilyl = SitBu3), which can be quantitatively prepared by dehalogenation of the disilane R*PhClSi-SiBrPhR* with NaR* (yellow, water- and air-sensitive crystals; decomp at ca. 70 degrees C; Si=Si distance 2.182 A), is comparatively reactive. It transforms 1) with Cl2, Br2, HCl, HBr, and HOH under 1,2-addition into disilanes R*PhXSi-SiX'PhR* (X/X' = Hal/Hal, H/Hal, H/OH), 2) with O2, S8, and Sen under insertion into 1,3-disiletanes R*PhSi(-Y-)2SiPhR* (Y = O, S, Se), 3) with Me2C=CH2 under ene reaction into the disilane R*PhRSi-SiHPhR* (R = CH2-CMe=CH2), 4) with N2O, Ten, tBuN identical to C, and Me3SiN=N=N under [2 + 1] cycloaddition into disiliranes -R*PhSi-Y-SiPhR*- (Y = O, Te, C=NtBu, NSiMe3; P4 adds 2 molecules of disilene), 5) with CO2, COS, PhCHO, and Ph2CS under [2 + 2] cycloaddition into disiletanes -R*PhSi-SiPhR*-Y-CO- (Y = O, S) as well as -R*PhSi-SiPhR*-Y-CRPh- (Y/R = O/H, S/Ph), 6) with CS2 and CSe2 under [2 + 3] cycloaddition into ethenes R*2Ph2Si2Y2C = CY2Si2Ph2R*2 (Y = S, Se), and 7) with CH2 = CMe-CMe=CH2 and Ph2CO under [2 + 4] cycloaddition into "Diels-Alder adducts". X-ray structure analyses of seven of these compounds are presented.     

Diverse modes of reactivity of dialkyl azodicarboxylates with P(III) compounds: synthesis, structure, and reactivity of products other than the Morrison-Brunn-Huisgen intermediate in a Mitsunobu-type reaction

The reactivity of diethyl azodicarboxylate (DEAD)/diisopropyl azodicarboxylate (DIAD) with P(III) compounds bearing oxygen or nitrogen substituents is explored. Compounds with structures quite different from that of Morrison-Brunn-Huisgen intermediate R'(3)P(+)N(CO(2)R)N(-)(CO(2)R) (1), observed in the Mitsunobu reaction, have been established by using X-ray crystallography and NMR spectroscopy. Thus reactions with X(6-t-Bu-4-Me-C(6)H(2)O)(2)P-NH-t-Bu [X = S (8), CH(2) (9)] or XP(mu-N-t-Bu)(2)P-NH-t-Bu [X = Cl (14) or NH-t-Bu (15)] and DEAD/DIAD lead to phosphinimine-carbamate-type of products X[6-t-Bu-4-Me-C(6)H(2)O](2)P[N-t-Bu][N(CO(2)R)NH(CO(2)R)] [X = S, R = Et (16); X = CH(2), R = Et (17); X = CH(2), R = i-Pr (18)] or XP(mu-N-t-Bu)(2)P(N-t-Bu)[N-(CO(2)-i-Pr)-N(H)(CO(2)-i-Pr) [X = Cl (19), NH-t-Bu (20)]. Treatment of 19 with 2,2,2-trifluoroethanol afforded the product [(CF(3)CH(2)O)P(mu-N-t-Bu)(2)P(+)(NH-t-Bu)[N(CO(2)-i-Pr)(HNCO(2)-i-Pr)]][Cl(-)] (21) whose structure is close to one of the intermediates proposed in the Mitsunobu reaction. The isocyanate CH(2)(6-t-Bu-4-Me-C(6)H(2)O)(2)P-NCO (10) underwent 1,3-(P,C) cycloaddition with DEAD/DIAD to lead to CH(2)(6-t-Bu-4-Me-C(6)H(2)O)(2)P[N(CO(2)R)N(CO(2)R)-C(O)-N] [R = Et (22), i-Pr (23)]. Reaction of 22-23 with 1,1'-bi-2-naphthol or catechol leads to novel tetracoordinate CH(2)(6-t-Bu-4-Me-C(6)H(2)O)(2)P(2,2'-OC(10)H(6)-C(10)H(6)-OH)[NC(O)-(CO(2)R)NH(CO(2)R)] [R = Et (24), i-Pr (25)] or pentacoordinate CH(2)(6-t-Bu-4-Me-C(6)H(2)O)(2)P(1,2-O(2)C(6)H(4))[NHC(O)-N(CO(2)R)NH(CO(2)R)] [R = Et (26), i-Pr (27)] compounds in which the original NCO residue is retained; this mode of reactivity is quite different from that observed for the MBH betaine 1. In 27, the nitrogen, rather than the oxygen, occupies an apical position of the trigonal bipyramidal phosphorus violating the commonly assumed preference rules for apicophilicity. It is shown that the previously reported azide derivative 3, obtained from the reaction of 11 with DIAD, undergoes a Curtius-type rearrangement to lead to the fused cyclodiphosphazane [(CH(2)(6-t-Bu-4-Me-C(6)H(2)O)(2))P(OC(O-i-Pr)NN(CO(2)-i-Pr)N)](2) (28); this compound is in equilibrium with its monomeric form in solution at >300 K. Finally, reaction of S(6-t-Bu-4-Me-C(6)H(2)O)(2)P(OPh) (13) with DIAD gave the hexacoordinate compound S[6-t-Bu-4-Me-C(6)H(2)O](2)P(OPh)[N(CO(2)-i-Pr)NC(O-i-Pr)O] (30) with an intramolecular S-->P bond. X-ray crystallographic evidence for compounds 16, 19, 21, 22, 25, 27, 28, and 30 has been provided.     

Structural diversity of the oxovanadium organodiphosphonate system: a platform for the design of void channels

The hydrothermal reactions of a vanadium source, an appropriate diphosphonate ligand, and water in the presence of HF provide a series of compounds with neutral V-P-O networks as the recurring structural motif. When the {O3P(CH2)(n)PO3}4- diphosphonate tether length n is 2-5, metal-oxide hybrids of type 1, [V2O2(H2O){O3P(CH2)(n)PO3}] x xH2O, are isolated. The type 1 oxides exhibit the prototypical three-dimensional (3-D) "pillared" layer architecture. When n is increased to 6-8, the two-dimensional (2-D) "pillared" slab structure of the type 2 oxides [V2O2(H2O)4{O3P(CH2)6PO3}] is encountered. Further lengthening of the spacer to n = 9 provides another 3-D structure, type 3, constructed from the condensation of pillared slabs to give V-P-O double layers as the network substructure. When organic cations are introduced to provide charge balance for anionic V-P-O networks, oxides of types 4-7 are observed. For spacer length n = 3, a range of organodiammonium cations are accommodated by the same 3-D "pillared" layer oxovanadium diphosphonate framework in the type 4 materials [H3N(CH2)(n)NH3][V4O4(OH)2 {O3P(CH)3PO3}2] x xH2O [n = 2, x = 6 (4a); n = 3, x = 3 (4b); n = 4, x = 2 (4c); n = 5, x = 1 (4d); n = 6, x = 0.5 (4e); n = 7, x = 0 (4f)] and [H3NR]y[V4O4(OH)2 {O3P(CH)3PO3}2] x xH2O [R = -CH2(NH3)CH2CH3, y = 1, x = 0 (4g); R = -CH3, n = 2, x = 3 (4h); R = -CH2CH3, y = 2, x = 1 (4i); R = -CH2CH2CH3, y = 2, x = 0 (4j); cation = [H2N(CH2CH3)2], y = 2, x = 0 (4k)]. These oxides exhibit two distinct interlamellar domains, one occupied by the cations and the second by water of crystallization. Furthermore, as the length of the cation increases, the organodiammonium component spills over into the hydrophilic domain to displace the water of crystallization. When the diphosphonate tether length is increased to n = 5, structure type 5, [H3N(CH2)2NH3][V4O4(OH)2(H2O){O3P(CH2)5PO3}2] x H2O, is obtained. This oxide possesses a 2-D "pillared" network or slab structure, similar in gross profile to that of type 2 oxides and with the cations occupying the interlamellar domain. In contrast, shortening the diphosphonate tether length to n = 2 results in the 3-D oxovanadium organophosphonate structure of the type 7 oxide [H3N(CH2)5NH3][V3O3{O3P(CH2)2PO3}2]. The ethylenediphosphonate ligand does not pillar V-P-O networks in this instance but rather chelates to a vanadium center in the construction of complex polyhedral connectivity of 7. Substitution of piperazinium cations for the simple alkyl chains of types 4, 5, and 7 provides the 2-D pillared layer structure of the type 6 oxides, [H2N(CH2CH2)NH2][V2O2{O3P(CH)(n)PO3H}2] [n = 2 (6a); n = 4 (6b); n = 6 (6c)]. The structural diversity of the system is reflected in the magnetic properties and thermal behavior of the oxides, which are also discussed.     

Merging organometallic chemistry with polyoxometalate chemistry

A series of polyoxomolybdate-incorporated organometallic complexes has been obtained by reaction of [MBr(CO)5] or solvated M(CO)3+ ions (M = Mn or Br) with (nBu4N)2[Mo2O7] in methanol, sometimes in the presence of triols of the type RC(CH2OH)3 (R = Me or CH2OH). Their molecular structures are related to those of previously described polyoxoalkoxomolybdates through the formal replacement of fac-MoO2(OR)+ units by topologically equivalent fac-M(CO)3+ units. Representative pairs of structurally related clusters include [Mo2O6(OMe)4-Re(CO)32]2- and [Mo4O10(OMe)6]2-, [Mo2O4MeC(CH2O)32Mn(CO)3]- and [Mo3O6(OMe)MeC(CH2O)32]-, [Mo2O4HOCH2C(CH2O)32Mn(CO)32] and [Mo4O8(OEt)2MeC(CH2O)32], [Mo6O16(OMe)2MeC(CH2O)32-Mn(CO)32]2- and [Mo8O20(OMe)4-MeC(CH2O)32]2-. Although the frameworks of the majority of derivatives are based on tetranuclear units which display the common rhomb-like structure, the alternative cubane-type arrangement is observed in [Mo2O5(OMe)5M(CO)32]-.     

Reactions of a platinum(III) dimeric complex with alkynes in water: novel approach to alpha-aminoketone, alpha-iminoketone, and alpha,beta-diimine via ketonyl-Pt(III) dinuclear complexes

Reaction of the platinum(III) dimeric complex [Pt(2)(NH(3))(4)((CH(3))(3)CCONH)(2)(NO(3))(2)](NO(3))(2) (1), prepared in situ by the oxidation of the platinum blue complex [Pt(4)(NH(3))(8)((CH(3))(3)CCONH)(4)](NO(3))(5) (2) with Na(2)S(2)O(8), with terminal alkynes CH[triple bond]CR (R = (CH(2))(n)CH(3) (n = 2-5), (CH(2))(n)CH(2)OH (n = 0-2), CH(2)OCH(3), and Ph), in water gave a series of ketonyl-Pt(III) dinuclear complexes [Pt(2)(NH(3))(4)((CH(3))(3)CCONH)(2)(CH(2)COR)](NO(3))(3) (3, R = (CH(2))(2)CH(3); 4, R = (CH(2))(3)CH(3); 5, R = (CH(2))(4)CH(3); 6, R = (CH(2))(5)CH(3); 7, R = CH(2)OH; 8, R = CH(2)CH(2)OH; 9, R = (CH(2))(2)CH(2)OH; 10, R = CH(2)OCH(3); 11, R = Ph). Internal alkyne 2-butyne reacted with 1 to form the complex [Pt(2)(NH(3))(4)((CH(3))(3)CCONH)(2)(CH(CH(3))COCH(3))](NO(3))(3) (12). These reactions show that Pt(III) reacts with alkynes to give various ketonyl complexes. Coordination of the triple bond to the Pt(III) atom at the axial position, followed by nucleophilic attack of water and hydrogen shift from the enol to keto form, would be the mechanism. The structures of complexes 3.H(2)O, 7.0.5C(3)H(4)O, 9, 10, and 12 have been confirmed by X-ray diffraction analysis. A competitive reaction between equimolar 1-pentyne and 1-pentene toward 1 produced complex 3 and [Pt(2)(NH(3))(4)((CH(3))(3)CCONH)(2)(CH(2)CH(OH)CH(2)CH(2)CH(3))](NO(3))(3) (14) at a molar ratio of 9:1, suggesting that alkyne is more reactive than alkene. The ketonyl-Pt(III) dinuclear complexes are susceptible to nucleophiles, such as amines, and the reactions with secondary and tertiary amines give the corresponding alpha-amino-substituted ketones and the reduced Pt(II) complex quantitatively. In the reactions with primary amines, the once formed alpha-amino-substituted ketones were further converted to the iminoketones and diimines. The nucleophilic attack at the ketonyl group of the Pt(III) complexes provides a convenient means for the preparation of alpha-aminoketones, alpha-iminoketones, and diimines from the corresponding alkynes and amines.     

Di-, tri-, and tetranuclear zinc hydroxamate complexes as structural models for the inhibition of zinc hydrolases by hydroxamic acids

Attempts to produce Zn analogues of the structural model complexes [M2(mu-O2CR)2(O2CR)2(mu-H2O)(tmen)2] (M = Ni, Co, Mn; R = CH(3), C(CH3)3, CF3) by the reaction of a series of zinc carboxylates with N,N,N',N'-tetramethylethylenediamine (tmen), resulted in the mononuclear complexes [Zn(OAc)(2)(tmen)] (1) and [Zn(crot)2(tmen)].(0.5)H2O (2) for R = CH3 and (CH)2CH3, respectively, and the dinuclear complexes [Zn(2)(mu-piv)(2)(piv)(2)(mu-H2O)(tmen)2] (3) and [Zn2(mu-OAc(F))2(OAc(F))2(mu-H2O)(tmen)2] (4) for R = C(CH3)3 and CF3, respectively. In contrast to the analogous imidazole series, i.e., [M2(mu-O2CR)2(O2CR)2(mu-H2O)(Im)4] (M = Ni, Co, Mn; R = CH3, C(CH3)3, CF3), zinc carboxylates react with imidazole to give only the mononuclear complexes [Zn(OAc)2(Im)2] (5), [Zn(crot)2(Im)2].H2O (6), [Zn(piv)2(Im)2].(0.5)H2O (7), and [Zn(OAc(F))2(Im)2] (8). Reaction of 1, 2, and 3 with either acetohydroxamic acid (AHA) or benzohydroxamic acid (BHA) gives the dinuclear complexes [Zn2(O2CR)3(R'A)(tmen)], where R'A = acetohydroxamate (AA) (9, 10, 11) or benzohydroxamate (BA) (13, 14, 15). In these complexes, the zinc atoms are bridged by a single hydroxamate and two carboxylates, with a capping tmen ligand on one zinc and a monodentate carboxylate bonded to the second zinc atom. This composition models closely the observed structure of the active site of the p-iodo-d-phenylalanine hydroxamic acid inhibited Aeromonas proteolyticaaminopeptidase enzyme. In contrast, 4 reacts with AHA to give [Zn2(OAc(F))3(tmen)2(AA)] (12) with an additional tmen ligand so that both Zn atoms are 6-coordinate, whereas reaction with BHA gives the trinuclear complex [Zn3(OAc(F))4(tmen)2(BA)2] (16). Reactions of 3 and 4 with glutarodihydroxamic acid (GluH2A2) produce the tetranuclear complexes [Zn4(piv)6(tmen)4(GluA2)] (18) and [Zn4(OAc(F))6(tmen)4(GluA2)] (19).     

Polymerization of methyl methacrylate catalyzed by nickel complexes with hydroxyindanone-imine ligands

A series of new hydroxyindanone-imine ligands [PhN=CC2H3(CH3)C6H2(CH3)OH] (HL1) and [ArN=CC2H3(CH3)C6H2(R)OH] (Ar = 2,6-i-Pr(2)C(6)H(3), R = Me (HL2), R = H (HL3), and R = Cl (HL4)) were synthesized and characterized. Reactions of hydroxyindanone-imines with Ni(OAc)(2).4H(2)O result in the formation of the trinuclear hexa(indanone-iminato)tri(nickel(II)) complex Ni(3)[PhN=CC2H3(CH3)C6H2(CH3)O](6) (1) and the mononuclear bis(indanone-iminato)nickel(II) complexes Ni[ArN=CC2H3(CH3)C6H2(R)O](2) (Ar = 2,6-i-Pr(2)C(6)H(3), R = Me (2), R = H (3), and R = Cl (4)). All nickel complexes were characterized by their IR, NMR spectra and elemental analyses. In addition, X-ray structure analyses were performed for complexes 1 and 2. After being activated with methylaluminoxane (MAO), these nickel(II) complexes can be used as catalysts for the polymerization of methyl methacrylate (MMA) to produce syndiotactic-rich PMMA. Catalytic activities and the degree of syndiotacticity of PMMA have been investigated for various reaction conditions.     

甾族化合物不对称合成的研究XV: 光学活性3-氧杂-A-失碳甾族化合物的合成

我们在寻找新的甾体口服避孕药的研究中,设计了A-失碳-3,9(10)-二烯-18-甲基甾体(1)作为全合成研究的目的物.前文已报道从5’-甲基呋喃二噻烷阴离子2b与消旋甾体CD环合成原3b的共轭加成,合成了两个新的消旋3-氧杂-A-失碳甾体4b和5b.本文报道