Isolation and synthesis of glutamine and glutarimide derivatives fromCroton humilis

Extract ofCroton humilis L. were shown to contain N - [N - (2 - methylpropanoyl) -l - glutaminoyl] - 2 - phenylethylamine, N - [N - 2R - methylbutanoyl) -l - glutaminoyl] - 2 - phenylethylamine, 2 - [N- (2 - methylpropanoyl)] - N - phenylethylglutarimide and 2 - [N- (2R - methylbutanoyl)] - N - phenylethylglutarimide. Structural proof was based on acid degradation, spectral studies as well as the synthesis of N - [N- (2- methylpropanoyl) -l - glutaminoyl] - 2 - phenylethylamine and 2 - [N - (2 - methylpropanoyl] - N - phenylethylglutarimide.     

Spectrophotometric study of the reaction mechanism between DDQ Pi- and iodine sigma-acceptors and chloroquine and pyrimethamine drugs and their determination in pure and in dosage forms

Two simple and accurate spectrophotometric methods are presented for the determination of anti-malarial drugs, chloroquine phosphate (CQP) and pyrimethamine (PYM), in pure and in different pharmaceutical preparations. The charge transphere (CT) reactions between CQP and PYM as electron donors and 2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ) pi-acceptor and iodine sigma-acceptor reagents to give highly coloured complex species have been spectrophotometrically studied. The optimum experimental conditions have been studied carefully. Beer' law is obeyed over the concentration range of 1.0-15 microg ml(-1) for CQP and 1.0-40 microg ml(-1) for PYM using I(2) and at 5.0-53 microg ml(-1) for CQP and 1.0-46 microg ml(-1) for PYM using DDQ reagents, respectively. For more accurate results, Ringbom optimum concentration range is calculated and found to be 10-53 and 8-46 microg ml(-1) for CQP and PYM using DDQ, respectively and 5-15 and 8-40 microg ml(-1) for CQP and PYM using iodine, respectively. The Sandell sensitivity is found to be 0.038 and 0.046 g cm(-2) for DDQ method and 0.0078 and 0.056 g cm(-2) for I(2) method for CQP and PYM, respectively which indicates the high sensitivity of both methods. Standard deviation (S.D.=0.012-0.014 and 0.013-0.015) and relative standard deviation (R.S.D.=0.09-1.4 and 1.3-1.5%) (n=5) for DDQ and I(2) methods respectively, refer to the high accuracy and precision of the proposed methods. These results are also confirmed by between day precision of percent recovery of 99-100.6%, and 98-101% for CQP and PYM by DDQ method and 99-102% and 99.2-101.4% for CQP and PYM by I(2) method respectively. These data are comparable to those obtained by British and American pharmacopoeias assay for the determination of CQP and PYM in raw materials and in pharmaceutical preparations.     

Spectrophotometric study of the reaction mechanism between DDQ as pi-acceptor and potassium iodate and flucloxacillin and dicloxacillin drugs and their determination in pure and in dosage forms

Two simple and accurate spectrophotometric methods are presented for the determination of beta-lactam drugs, flucloxacillin (Fluclox) and dicloxacillin (Diclox), in pure and in different pharmaceutical preparations. The charge transfer (CT) reactions between Fluclox and Diclox as electron donors and 2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ) pi-acceptor and potassium iodate via oxidation reduction reaction where the highly coloured complex species or the liberated iodine have been spectrophotometrically studied. The optimum experimental conditions have been studied carefully. Beer's law is obeyed over the concentration range of 2-450 microg ml(-1) for Fluclox and 10-450 microg ml(-1) for Diclox using DDQ reagent and at 50-550 microg ml(-1) for Fluclox and 50-560 microg ml(-1) for Diclox using iodate method, respectively. For more accurate results, Ringbom optimum concentration range is calculated and found to be 6-450 and 15-450 microg ml(-1) for Fluclox and Diclox using DDQ, respectively, and 65-550 and 63-560 microg ml(-1) for Fluclox and Diclox using iodine, respectively. The Sandell sensitivity is found to be 0.018 and 0.011 microg cm(-2) for DDQ method and 0.013 and 0.011 microg cm(-2) for iodate method for Fluclox and Diclox, respectively, which indicates the high sensitivity of both methods. Standard deviation (S.D.=0.01-0.80 and 0.07-0.98) and relative standard deviation (R.S.D.=0.13-0.44 and 0.11-0.82%) (n=5) for DDQ and iodate methods, respectively, refer to the high accuracy and precision of the proposed methods. These results are also confirmed by between-day precision of percent recovery of 99.87-100.2 and 99.90-100% for Fluclox and Diclox by DDQ method and 99.88-100.1 and 99.30-100.2% for Fluclox and Diclox by iodate method, respectively. These data are comparable to those obtained by British and American pharmacopoeias assay for the determination of Fluclox and Diclox in raw materials and in pharmaceutical preparations.     

Synthesis and characterization of some chalcones and their cyclohexenone derivatives

A series of chalcones and their derivatives have been synthesized. Chalcones, 1-(1,3-benzodioxol-5-yl)-3-(aryl)-prop-2-en-1-ones were prepared by the aldol condensation of 1-(1,3-benzodioxol-5-yl)ethanones and aryl aldehydes. Based-catalyzed condensation of 1-(1,3-benzodioxol-5-yl)-3-(aryl)prop-2-en-1-ones with ethyl acetoacetate yields corresponding ethyl 4-(1,3-benzodioxol-5-yl)-6-(aryl)-2-oxocyclohex-3-ene-1-carboxylates. Some of the synthesized chalcones were reported in the literature; the newly synthesized compounds were characterized by single crystal X-ray studies, IR, ¹H-NMR and LCMS mass spectral analysis.     

Halide ions complex and deprotonate dipicolinamides and isophthalamides: assessment by mass spectrometry and UV-visible spectroscopy

The F(-), Cl(-), and Br(-) binding selectivity of bis(p-nitroanilide)s of dipicolinic and isophthalic acids was studied by using competitive electrospray mass spectrometry and UV-Visible spectroscopy. Both hosts prefer binding Cl(-) over either F(-) or Br(-). Host deprotonation was observed to some extent in all experiments in which the host was exposed to halide ions. When F(-) was present, host deprotonation was often the major process, whereas little deprotonation was observed by Cl(-) or Br(-), which preferred complexation. A solution of either host changed color when mixed with a F(-), H(2)PO(4)(-), di- or triphenylacetate solution.     

Isolation and identification of the anti-isohumulones and the anti-acetylhumulinic acids

The anti-isohumulones [5-(3-methylbutanoyl)-2-(3-methylbut-2-enyl)-4-hydroxy-4-(4-methylpent-3-enoyl)-cyclopentane-1,3-diones] and the anti-acetylhumulinic acids [5-(3-methylbutanoyl)-2-(3-methylbut-2-enyl)-4-ethanoyl-4-hydroxy-cyclopentane 1,3-diones] have been isolated from an isomerisation reaction mixture of humulone [2-(3-methylbutanoyl)-4,6-di(3-methylbut-2-enyl)-6-hydroxy-cyclohexane-l,3,5-trione] by counter-current distribution and identified by spectroscopic techniques. The formation mechanism is presented and the stereochemical consequences are discussed. The anti-isohumulones are the most bitter hop compounds presently known.     

Synthesis and Structure of 1- and 2-Isomers of (Trimethoxysilylmethyl) and (Silatranylmethyl)benzotriazole

We have synthesized 1- and 2-(trimethylsilylmethyl)- and 1- and 2-(trimethoxysilylmethyl)benzotriazoles by reaction of 1,2,3-benzotriazolylsodium with trimethyl- or trimethoxy(chloromethyl)silane. We obtained 1- and 2-(silatranylmethyl)benzotriazoles by transesterification of the latter with triethanolamine.     

Simultaneous extraction and determination of anionic surfactants in waters and sediments

A new method has been developed for the simultaneous determination of the most frequently used anionic surfactants - linear alkylbenzene sulfonates (LAS), alkyl ethoxysulfates (AES) and alkyl sulfates (AS) - in aqueous and sediment samples. Preconcentration and purification of water samples are carried out by means of solid-phase extraction (SPE). The efficiency of two different extraction methods for the analysis of sediments - Soxhlet extraction and pressurized liquid extraction (PLE) - has been compared. Identification and quantification of the target compounds is performed using a liquid chromatography - mass spectrometry (LC-MS) system equipped with an electrospray interface (ESI) in negative ion-mode. Homologue recoveries are 85-123% for SPE, 94-112% for Soxhlet extraction and 81-125% for PLE in the case of LAS, and 60-94% for SPE, 61-109% for Soxhlet extraction and 55-99% for PLE in the case of AES, whereas the limits of detection are 0.1-0.5 ngml(-1) in water and 1-5 ngg(-1) in sediment. This method has been applied to the determination of anionic surfactants in the Guadalete estuary (SW Spain), and LAS concentration levels from 538 to 1014 ngg(-1) in sediments and from 25.1 to 64.4 ngml(-1) in waters have been found. AES values from 168 to 536 ngg(-1) in sediments and from 4.5 to 11.9 ngml(-1) in waters are reported for the first time in European rivers.     

Ternary complexes of the Cu(II) and Ni(II) chelates of edta and dcta with cyanide and ethylenediamine

The formation of the ternary complexes CuEDTA(en)(2-), CuEDTA(CN)(3-), CuDCTA(CN)(3-), NiDCTA(CN)(3-) and NiEDTA(en)(2-) has been established spectrophotometrically. The stability constants found were log K = 2.87 +/- 0.03, 3.76 +/- 0.06, 2.64 +/- 0.35, 2.41 +/- 0.21 and 2.74 +/- 0.35 respectively. For the system CuDCTA(2-) + en no ternary complex was observed, instead Cu(en)(2)(2+) was formed. No reaction was found for the systems CoEDTA(2-) + N(3)(-), CoDCTA(2-) + N(3)(-), NiDCTA(2-) + en, NiDCTA(2-) + phen, NiEDTA(2-) + phen, NiDCTA(2-) + N(3)(-), NiEDTA(2-) + N(3)(-), CrEDTA(-) + NH(3), CrEDTA(-) + CN(-), CuEDTA(2-) + N(3) and CuEDTA(2-) + N(3)(-). The systems CoEDTA(2-) + en and CoDCTA(2-) + en involve more than one equilibrium. The absorption spectra of the ternary complexes between 500 and 850 nm are reported.     

Synthesis and characterization of new thiazolidinones containing coumarin moieties and their antibacterial and antioxidant activities

New coumarin derivatives, namely (2-(4-methyl-2-oxo-2H-chromen-7-yloxy)-N-(4-oxo-2-phenylthiazolidin-3-yl)acetamide, N-(2-(3-methoxyphenyl)-4-oxothiazolidin-3-yl)-2-(4-methyl-2-oxo-2H-chromen-7-yloxy)acetamide, 2-(4-methyl-2-oxo-2H-chromen-7-yloxy)-N-(4-oxo-2-(2,3,4trimethoxyphenyl)thiazolidin-3-yl)acetamide and N-(2-(4-bromophenyl)-4-oxothiazolidin-3-yl)-2-(4-methyl-2-oxo-2H-chromen-7-yloxy)acetamide) were synthesized starting from 4-methyl-7-hydroxycoumarin. The structures of the obtained compounds were confirmed by analytical IR and NMR spectra to elucidate the different positions of protons and carbons and as well as theoretical studies (DFT/B3LYP). The new compounds were screened for antibacterial activity. Most of them are more active against E. coli S. aureus and B. subtilis than standard references.     

Structures,fragmentation, and protonation of trideoxynucleotide CCC mono- and dianions

Both quantum chemical calculations and ESI mass spectrometry are used here to explore the gas-phase structures, energies, and stabilities against collision-induced dissociation of a relatively small model DNA molecule--a trideoxynucleotide with the sequence CCC, in its singly and doubly deprotonated forms, (CCC-H)(-) and (CCC-2H)(2-), respectively. Also, the gas-phase reactivity of these two anions was measured with HBr, a potential proton donor, using an ESI/SIFT/QqQ instrument. The computational results provide insight into the gas-phase structures of the electrosprayed (CCC-2H)(2-) and (CCC-H)(-) anions and the neutral CCC, as well as the proton affinities of the di- and monoanions. The dianion (CCC-2H)(2-) was found to dissociate upon CID by charge separation via two competing channels: separation into deprotonated cytosine (C-H)(-) and (CCC-(C-H)-2H)(-), and by w(1)(-)/a(2)(-) cleavage of the backbone. The monoanion (CCC-H)(-) loses a neutral cytosine upon CID, and an H/D-exchangeable proton, presumably residing on one of the phosphate groups, is transferred to the partially liberated (C-H)(-) before dissociation. This was confirmed by MS/MS experiments with the deuterated analog. The reaction of (CCC-2H)(2-) with HBr was observed to be rapid, k=(1.4+/-0.4) x 10(-9) cm(3) molecule(-1) s(-1), and to proceed both by addition (78%) and by proton transfer (22%) while (CCC-H)(-) reacts only by HBr addition, k=(7.1+/-2.1) x 10(-10) cm(3) molecule(-1) s(-1). This is in accord with the computed proton affinities of (CCC-2H)(2-) and (CCC-H)(-) anions that bracket the known proton affinity of Br(-).     

Singlet and triplet photocycloaddition reactions of 2-pyridones with propenoate and 2,4-pentadienotes,and the frontier molecular orbital analysis

Regioselective photocycloadditions of 2-pyridones ( 1 ) with 2,4-pentadienoates ( 3 ) were analysed and compared with the reactions with propenoate ( 2 ), and origins of the different regioselectivities were inferred from frontier molecular orbital properties by the use of PM3-CI method. Direct photoreactions of 1 with 3 being α,β,γ,δ-unsaturated carboxylates gave four types of regio-selective [2+2]cycloadducts, 3-β:4-α-4, 5, 3-δ:4-γ-6,7,5-δ: 6-γ-8, 9 and 5-δ:6-γ-[2+2]cycloadducts 10,11. Sensitized photoreactions of 1 with 3 did not occur, and fluorescence of 1 was weakly quenched by 3. Otherwise, main cycloadducts in the sensitized reactions of 1 with 2 have been obtained as 5-α:6-β-[2+2]cycloadducts, which were different from main 3-β:4-α-[2+2]cycloadducts of the direct reactions, and these site-and regio-selectivities were inferred from the different frontier molecular orbital coefficients at the. 3-and 6-positions of 1 for the triplet and singlet states. Formations of 4–7 were also interpreted by both effects of frontier orbital HSOMO-LUMO interactions and of the electrostatic interaction between 1 and 3. The other site-and regioselective adducts 8–11 were inferred to be formed by the electrostatic interactions similar to 2-pyridone photodimerization.     

Synthesis of 1,2,4-triazol-5-ylidenes and their interaction with acetonitrile and chalcogens

Two new, more convenient methods for the synthesis of 1,2,4-triazol-5-ylidenes are described. Four new 1,2,4-triazol-5-ylidenes have been prepared using these methods: 1-(1-adamantyl)-3,4-diphenyl-1,2,4-triazol-5-ylidene (2a), 1-(1-adamantyl)-3-phenyl-4-(p-bromophenyl)-1,2,4-triazol-5-ylidene (2b), 1-(1-adamantyl)-3-phenyl-4-(alpha-naphthyl)-1,2,4-triazol-5-ylidene (2c), and 1-(1-adamantyl)-3,4-di(p-bromophenyl)-1,2,4-triazol-5-ylidene (2d). The X-ray crystal structures of 2d and the precursor salt 1-(1-adamantyl)-3,4-di(p-bromophenyl)-1,2,4-triazolium bromide (1e) are described. Compound 2a reacts with CH(3)CN via C-H insertion to form 1-(1-adamantyl)-3,4-diphenyl-5-cyanomethyl-5H-1,2,4-triazoline (3), and 2a and 2d react with elemental sulfur and elemental selenium, respectively, to form the corresponding thione (4) and selenone (5).     

Kinetics and products of the gas-phase reactions of divinyl sulfoxide with OH and NO3 radicals and O3

Using relative rate methods, rate constants for the gas-phase reactions of divinyl sulfoxide [CH 2CHS(O)CHCH 2; DVSO] with NO 3 radicals and O 3 have been measured at 296 +/- 2 K, and rate constants for the reaction with OH radicals have been measured over the temperature range of 277-349 K. Rate constants obtained for the NO 3 radical and O 3 reactions at 296 +/- 2 K were (6.1 +/- 1.4) x 10 (-16) and (4.3 +/- 1.0) x 10 (-19) cm (3) molecule (-1) s (-1), respectively. For the OH radical reaction, the temperature-dependent rate expression obtained was k = 4.17 x 10 (-12)e ((858 +/- 141)/ T ) cm (3) molecule (-1) s (-1) with a 298 K rate constant of (7.43 +/- 0.71) x 10 (-11) cm (3) molecule (-1) s (-1), where, in all cases, the errors are two standard deviations and do not include the uncertainties in the rate constants for the reference compounds. Divinyl sulfone was observed as a minor product of both the OH radical and NO 3 radical reactions at 296 +/- 2 K. Using in situ Fourier transform infrared spectroscopy, CO, CO 2, SO 2, HCHO, and divinyl sulfone were observed as products of the OH radical reaction, with molar formation yields of 35 +/- 11, 2.2 +/- 0.8, 33 +/- 4, 54 +/- 6, and 5.4 +/- 0.8%, respectively, in air. For the experimental conditions employed, aerosol formation from the OH radical-initiated reaction of DVSO in the presence of NO was minor, being approximately 1.5%. The data obtained here for DVSO are compared with literature data for the corresponding reactions of dimethyl sulfoxide.     

Highly stereocontrolled and regiocontrolled syntheses of 2,3,4-trisubstituted alkanoates and lactones

New chlorodiols (±)-3 and (±)-5 are densely functionalized and versatile synthons. They are converted in one step on a gram scale into 2-chlorolactones (±)-6 and (±)-7 and into 4-hydroxy glycidate esters (±)-9 and (±)-10. The 4-hydroxy glycidate esters (±)-9 and (±)-10 are converted stereospecifically and regiospecifically into oxazolines (±)-13 and (±)-14 and into cyclic carbamates (±)-18-(±)-20. The 4-hydroxy glycidate ester (±)-10 undergoes stereocontrolled and regiocontrolled epoxide opening by sodium azide to form the 2-azido-3,4-dihydroxy alkanoate (±)-21. Finally, chlorodiol (±)-5 reacts stereospecifically with silver triflate to form the 2,3-dihydroxyfuranone (±)-26.     

Synthesis and Structure of Indole-, Pyridine-, and Benzimidazole-Containing Nitroethenes

Previously unknown 2-(1,2-dimethylindol-3-yl)-1-nitroethene was synthesized, and procedures for preparing 2-(1-methylbenzimidazol-2-yl)- and 2-(3-pyridyl)-1-nitroethens were improved. The structures of the products were determined by spectroscopic methods and from their dipole moments. According to single crystal X-ray diffraction data, the (E)-2-(1-methylbenzimidazol-2-yl)-1-nitroethene molecules are virtually planar and are packed in stacks in the crystal lattice, with appreciable stacking interaction.     

粤航一号稻米及其亲本抗性淀粉含量的测定与比较

为确定航天品种功能稻米——粤航一号抗性淀粉含量,给临床观察膳食干预后果判断提供实验参考数据,并了解航天育种对该品种大米抗性淀粉含量的影响,用Goni测定方法测定了粤航一号、富硒粤航一号、长丝占、粳籼89 4种稻米的抗性淀粉含量。结果表明,粤航一号、富硒粤航一号、长丝占、粳籼89 4种稻米的抗性淀粉含量分别是(0.30±0.11)%、(0.47±0.37)%、(0.31±0.66)%、(0.36±0.62)%。可见粤航一号与亲本长丝占,及与富硒品种富硒粤航一号,和非航天品种优质大米粳籼89在抗性淀粉含量上无差异,航天育种对该品种稻米抗性淀粉生成遗传特征无影响。     

Kinetics and mechanisms of bromine chloride reactions with bromite and chlorite ions

Chloride ion catalyzes the reactions of HOBr with bromite and chlorite ions in phosphate buffer (p[H(+)] 5 to 7). Bromine chloride is generated in situ in small equilibrium concentrations by the addition of excess Cl(-) to HOBr. In the BrCl/ClO(2)(-) reaction, where ClO(2)(-) is in excess, a first-order rate of formation of ClO(2) is observed that depends on the HOBr concentration. The rate dependencies on ClO(2)(-), Cl(-), H(+), and buffer concentrations are determined. In the BrCl/BrO(2)(-) reaction where BrCl is in pre-equilibrium with the excess species, HOBr, the loss of absorbance due to BrO(2)(-) is followed. The dependencies on Cl(-), HOBr, H(+), and HPO(4)(2)(-) concentrations are determined for the BrCl/BrO(2)(-) reaction. In the proposed mechanisms, the BrCl/ClO(2)(-) and BrCl/BrO(2)(-) reactions proceed by Br(+) transfer to form steady-state levels of BrOClO and BrOBrO, respectively. The rate constant for the BrCl/ClO(2)(-) reaction [k(Cl)(2)]is 5.2 x 10(6) M(-1) s(-1) and for the BrCl/BrO(2)(-) reaction [k(Br)(2)]is 1.9 x 10(5) M(-1) s(-1). In the BrCl/ClO(2)(-) case, BrOClO reacts with ClO(2)(-) to form two ClO(2) radicals and Br(-). However, the hydrolysis of BrOBrO in the BrCl/BrO(2)(-) reaction leads to the formation of BrO(3)(-) and Br(-).     

Synthesis and application of precursors of hetero-anthracenes : 2-halo- and 2,2′-dihalodiphenylmethanes and methine substituted derivatives

In the diphenylmethane series, the synthesis of 2,2′ - diiododiphenylmethane (4g) and the improved synthesis of 2,2′ - dibromodiphenylmethane (4e) are reported. The triphenylmethane derivatives, 2-bromo-, 2-iodo-, 2,2′-dichloro-, 2,2′-dibromo- and 2,2′-diiodotriphenylmethane (4f, 4h, 4i, 4j and 4k, respectively) have been prepared. Via an entirely different approach, 1-(2-bromophenyl)- and 1 - (2 - chlorophenyl) - 1 - phenyl - 2,2 - dimethylpropane (4m and 4l) were obtained as derivatives of t-butyldiphenylmethane. Examples are given for the application of the new compounds in the synthesis of 9,10 - dihydro - 9 - heteroanthracenes (1, 2 and 3) via the formation of the corresponding organometallic derivatives.     

Synthesis and structural characterisation of stable pyridine- and phosphine-functionalised N-heterocyclic carbenes

Stable, uncoordinated (1-[2-(6-trimethylsilyl)pyridyl]-3-[(2,6- diisopropyl)phenyl]imidazol-2-ylidene), I, and (1-[beta-(diphenylphosphino)ethyl]-3-[(2,6-diisopropyl)phenyl]imidazol- 2-ylidene), II, have been synthesised; in the solid state they adopt a conformation with the lone pairs in a mutually anti arrangement.