Simultaneous spectrophotometric determination of molybdenum and selenium,and of molybdenum and tellurium

A method is reported for the extraction of molybdenum-phenylfluorone by chloroform. The extraction is complete whether perchlorate ions are present or not but the extractions in the presence of perchlorate ions gave a somewhat more sensitive procedure for the spectrophotometric determination of molybdenum in the solvent phase as the molybdenum-phenylfluorone complex.A procedure is reported for the simultaneous determination of molybdenum and selenium, and molybdenum and tellurium. The method involves first the formation and solvent extraction of the molybdenum-phenylfluorone complex by chloroform in the presence of perchlorate ions, followed by determination of selenium in the remaining aqueous phase as selenium-diethyldithiocarbamate complex after solvent extraction with 2-ethyl-1-hexanol in the presence of perchlorate ions. A similar procedure is reported for the simultaneous determination of molybdenum and tellurium except that in the determination of molybdenum, the phenylfluorone complex is extracted by chloroform in the absence of perchlorate ions. Tellurium is determined in the remaining aqueous phase as tellurium-diethyldithiocarbamate complex after solvent extraction by 2-ethyl-1-hexanol solvent extraction in the presence of perchlorate ions.     

Sizes of atoms and ions and covalency of bonding in molecules and crystals

A new system of atomic radii for the elements up to barium inclusive is constructed. Values of the radii are chosen so as the dependence between the dissociation energy of diatomic homonuclear molecules and a depth of atom overlapping is monotonous, and the scatter of data is minimal. The depth of overlapping is calculated as a difference between the sum of atomic radii and an experimental interatomic distance. Conclusions are made that: the radii of free atoms and ions are determined by the value of the electron density equal to 0.01 au; they considerably change in molecules and crystals only as a result of the charge transfer from cation to anion; covalent bonding is well described by the overlapping of free atoms (ions), confined by the surface of the given radius, and its energy depends upon the depth of overlapping of valence electron densities of atoms. A method of overlapping atoms is proposed for the approximate estimation of ionic sizes and charges in bound systems.     

Direct and sensitized photoprocesses of bis-benzimidazole dyes and the effects of surfactants and DNA

The photoprocesses of two bis-benzimidazole dyes, Hoechst 33258 (1) and an analog, where the phenolic group in p-position is replaced by an ethoxy group, Hoechst 33342 (2), were studied. For 1 and 2 in aqueous solution the quantum yield of fluorescence is strongly pH dependent; it decreases from a maximum value of phi f = 0.4 at pH 5 to phi f = 0.02 at pH 8. The effects of absorption and fluorescence, induced by sodium dodecyl sulfate surfactants below and above the critical micelle concentration and by double-stranded DNA, are interpreted by assuming that in bulk aqueous solution the dyes are essentially present as monomers. The strong enhancement of phi f, when the dye is bound to double-stranded DNA or solubilized in micelles, is suggested to be due to different environments at the benzimidazole rings. A quinoid intermediate with absorption maximum at 380 nm is formed for 1 at neutral pH using lambda exc = 248 or 308 nm. N-centered radicals of 1 or 2 in aqueous solution were observed by laser flash photolysis after electron ejection using wavelengths of 193 or 248 nm (mono and biphotonic, respectively). The precursor radical cation escaped observation but is transformed into the above radicals by deprotonation. Electron transfer from 1 in aqueous solution to triplet acetone takes place, and subsequent deprotonation is proposed to yield N-centered radicals. In addition, energy transfer from acetone to 1 is suggested, leading to T-T absorption with the maximum at 700 nm. The photoprocesses are discussed and the results compared with those known from pulse radiolysis.     

Kinetics and mechanisms of hydrolysis and aminolysis of thioxocephalosporins

The effect of replacing the beta-lactam carbonyl oxygen in cephalosporins by sulfur on their reactivity has been investigated. The second-order rate constant for alkaline hydrolysis of the sulfur analogue is 2-fold less than that for the natural cephalosporin. The thioxo derivative of cephalexin, with an amino group in the C7 side chain, undergoes beta-lactam ring opening with intramolecular aminolysis by a reaction similar to that for cephalexin itself. However, the rate of intramolecular aminolysis for the S-analogue is 3 orders of magnitude greater than that for cephalexin. Furthermore, unlike cephalexin, intramolecular aminolysis in the S-analogue occurs up to pH 14 with no competitive hydrolysis. The rate of intermolecular aminolysis of natural cephalosporins is dominated by a second-order dependence on amine concentration, whereas that for thioxocephalosporins shows only a first-order term in amine. The Bronsted beta(nuc) for the aminolysis of thioxo-cephalosporin is +0.39, indicative of rate-limiting formation of the tetrahedral intermediate with an early transition state with relatively little C-N bond formation.     

蟹,虾壳微观形貌与结构研究

用Ｘ射线衍射与扫描电镜研究了蟹壳，虾壳的形貌与微观结构，蟹壳中以方解石晶型存在的碳酸钙分布在网状结构的有机质中，网孔的尺寸约５～２５μｍ有机基质脱去蛋白后留下的甲壳质呈片层状结构，它的重复距离为０．９６ｎｍ。     

Structure and dynamics of surfaces of thin films and water microdroplets

Systems containing 3456 water molecules in a periodic rectangular cell are studied by molecular dynamics simulation. The cell parameter along the z axis noticeably exceeds parameters along the x and y axes. Thin film with a thickness of about 30 Å is formed in a cell. Some molecules are transferred into the vapor phase; however, due to the periodicity along the z axis, they are poured into periodic images of the simulated layer above or below this layer. The width of the transition surface layer is about 6–7 Å in density upon passage from the liquid to vapor phases is generally related to the roughness of the surface rather than to a decrease in a local density. The self-diffusion coefficient of molecules in the surface layer is greatly larger than inside the film. Noticeable anisotropy in the diffusion motion of molecules in the surface layer is not revealed. As all of the cell parameters increase, the film is transformed into nearly spherical micro-droplet with a strongly roughed surface. The self-diffusion coefficient of surface molecules of microdroplet is also larger than for molecules inside the droplet.     

Amount of sterols and triterpenoids in leaves and petioles of leaf-shedding and standard lines of cotton plant

The amount of free and bound sterols and triterpenoids in the leaf blades and petioles of the variety Tashkent-1 and the deciduous lines L-275 and L-470 in the budding-flowering, maturing, and leaf-fall phases have been compared. In the leaf blades, the maximum accumulation of free sterols in the deciduous lines is observed in an earlier phase than in the variety Tashkent-1, and this is most characteristic for sterols saturated in the C-17 side chain. The dynamics of the change in the content of unsaturated sterols is individual for each line. The nature of the change in the amount of free sterols in the petioles is typical for each line and does not depend on the nature of the sterol for the variety Tashkent-1 this index falls sharply in the leaf-fall phase while for L-275 the process is retarded between the second and third phases, and for L-470 in the same period the amount of these substances rises sharply. In the leaf blades, as a rule, the level of sterol esters changes in parallel with the levels of free sterols, and in the petioles in the antiparallel direction between the first and second phases. In all the samples free and bound amyrin was detected. The dynamics of the change in the amounts of these substances in the three lines were different.Institute of the Chemistry of Plant Substances, Uzbek SSR Academy of Sciences, Tashkent. Institute of Experimental Plant Biology, Uzbek SSR Academy of Sciences, Tashkent. Translated from Khimiya Prirodnykh Soedinenii, Vol. 6, pp. 796–805, November–December, 1989.     

Amount of sterols and triterpenoids in leaves and petioles of leaf-shedding and standard lines of cotton plant

The amount of free and bound sterols and triterpenoids in the leaf blades and petioles of the variety Tashkent-1 and the deciduous lines L-275 and L-470 in the budding-flowering, maturing, and leaf-fall phases have been compared. In the leaf blades, the maximum accumulation of free sterols in the deciduous lines is observed in an earlier phase than in the variety Tashkent-1, and this is most characteristic for sterols saturated in the C-17 side chain. The dynamics of the change in the content of unsaturated sterols is individual for each line. The nature of the change in the amount of free sterols in the petioles is typical for each line and does not depend on the nature of the sterol for the variety Tashkent-1 this index falls sharply in the leaf-fall phase while for L-275 the process is retarded between the second and third phases, and for L-470 in the same period the amount of these substances rises sharply. In the leaf blades, as a rule, the level of sterol esters changes in parallel with the levels of free sterols, and in the petioles in the antiparallel direction between the first and second phases. In all the samples free and bound amyrin was detected. The dynamics of the change in the amounts of these substances in the three lines were different. Institute of the Chemistry of Plant Substances, Uzbek SSR Academy of Sciences, Tashkent. Institute of Experimental Plant Biology, Uzbek SSR Academy of Sciences, Tashkent. Translated from Khimiya Prirodnykh Soedinenii, Vol. 6, pp. 796–805, November–December, 1989.     

Kinetics of pyrolysis and combustion of pine needles and cones

A wide kinetic study has been carried out under different conditions in TG and TG–MS for each material, at different operating conditions. Runs were carried out at three different atmospheres: N₂, N₂:O₂ 4:1 and N₂:O₂ 9:1. In addition to the dynamic runs carried out at constant heating rate, other runs were performed in an isothermal regime (constant heating rate until the set temperature is reached and then the set temperature is maintained constant).In addition, a study of the thermal decomposition for both materials was also carried out in a dynamic run using TG–MS in order to observe the evolution of the major compounds and to discuss the information that could be obtained.From the overall analysis of the data, schemes of reactions and kinetic values were calculated by integration of the differential equations and minimizing the squared differences between the experimental and calculated values. It is important to emphasise that the same set of parameters is proposed for the runs for each material, and depends on neither the heating rate in dynamic runs nor whether the run is carried out in a dynamic or isothermal mode.     

Ignition and combustion characteristics of compound of magnesium and boron

Compound of magnesium and boron (MB) is promising to be the ideal substitute of amorphous boron which is usually used as the raw material of boron-based fuel-rich propellants. In this study, the physical characteristics of MB and amorphous boron were studied by the scanning electron microscope, X-ray diffraction and X-ray photoelectron spectroscopy. The thermal reaction characteristics and the ignition and combustion characteristics were investigated through TG/DSC experiments and laser ignition experiments. The experimental results show that the MB particle is much more regular than amorphous boron, which favors for the preparation of boron-based fuel-rich propellants. Magnesium exists in the form of elementary substance, and boron oxide is produced during the preparation of MB which results in the longer ignition delay time of MB. The content of magnesium and the pressure have effects on the MB combustion performance. Although the combustion of magnesium can provide much heat for the combustion of boron, MB with moderate content of magnesium shows the best combustion performance. On the contrast, the ignition delay time of MB is independent on the content of magnesium and the pressure.     

Aggregation and reactivity of the dilithium and dicesium enediolates of 1-naphthylacetic acid

UV-vis spectra of the dilithium, 1-Li, and dicesium, 1-Cs, enediolates of alpha-naphthylacetic acid show no systematic change with concentration in dilute THF solution, but addition of small amounts of HMPA causes a bathochromic shift in the spectrum of 1-Li. These results indicate that these salts are aggregated and that HMPA breaks up the aggregates of 1-Li. The quantitative effect of small increments of HMPA indicates that 1-Li is a dimer. Alkylation reactions of 1-Cs show half-order kinetics in enediolate indicating that this salt is also dimeric but that the small amount of monomer in equilibrium is the actual reactant. Alkylation of 1-Li, however, is much slower and shows first-order kinetics interpreted as a direct reaction of the dimer; the amount of monomer in this case is too small to compete. A solution of 1-Li in THF containing 10% HMPA is much more reactive in alkylation than 1-Li alone and the first-order dependence in 1-Li is now interpreted as reaction of the monomer. Compound 1-Li is found to form a mixed aggregate with LDA, a finding that has possible synthetic significance since enediolates used in syntheses are frequently prepared using LDA. Structures of these compounds are suggested based on model ab initio computations.     

Kinetics and mechanism of HCN evolution from nylon 66 and design of apparatus

The evolution of HCN from the oxidation of nylon 66 has been studied in three apparatuses of different design (all based on stream flow) over a temperature range from 390 to 700°C. Although the numerical values for rate constants (diffusion controlled) and energies of activation differ, the same mechanism is deduced from the results of the three designs. It is concluded that a simple horizontal tube in a furnace is the most efficient apparatus as far as sweeping out volatile products is concerned. The mechanism of thermal oxidative degradation has been evaluated in detail. It is shown that mechanisms where the first reaction step is not the slowest or the slowest one of first or second order all fit the experimental results. However, it is concluded that the mechanism where the first step is first order and the slowest one is the most likely one. The respective parameters have been evaluated for the results obtained from the horizontal tube apparatus.     

Stability and reactivity of all-metal aromatic and antiaromatic systems in light of the principles of maximum hardness and minimum polarizability

It is demonstrated that among various possible isomers of all-metal aromatic compounds such as Al(4)(2-) and their complexes the most stable isomer with the minimum energy is the hardest and the least polarizable. A similar situation is observed for different isomers of all-metal antiaromatic compounds such as Al(4)(4-) and their complexes. It is shown that linear Al(4)(4-) is energetically more stable than its cyclic isomer. The reaction energies associated with the complexation processes highlight the stability of those complexes. The difference in energy, hardness, and polarizability between a cyclic molecule and its linear counterpart convincingly shows that an aromatic molecule exhibits negative changes in energy and polarizability but positive changes in hardness as expected from the principles of minimum energy, minimum polarizability, and maximum hardness. Although the aromaticity of Al(4)(2-) is unequivocally established through this study, the antiaromaticity picture in the case of Al(4)(4-) is shown to be poorly understood;however, the present analysis sheds light on this controversy.     

Cellulose and chitin esters,and the reactivity of cellulose and chitin

Summary On comparison of the reactivities of chitin and cellulose in their conversion into ethers and esters it is found that chitin is considerably less reactive than cellulose, which is to be attributed to a difference in the internal active surfaces.Paper read at a General Meeting of the Division of Chemical Sciences, Academy of Sciences, USSR, Moscow, March 10, 1961     

Extraction and spectrophotometric determination of cobalt(II) with thiobenzoylacetone and simultaneous determination of cobalt and nickel

Thiobenzoylacetone in benzene is used for the extraction and spectrophotometric determination of cobalt at pH 8.4-9.1. The orange-yellow complex is measured at 460 nm. The system conforms to Beer's law over the range 0.20-4.58 microg ml of extract. The colour of the complex is stable for at least 144 hr. Cobalt(II) is quantitatively extracted and determined in the presence of 200:1 (w w ratios) of various ions. The method is made selective by using common sequestering agents such as thiourea or fluoride or by selective extraction with mesityl oxide, tributylphosphate and acetylacetone. It is possible to determine cobalt in the presence of nickel by simultaneous spectrophotometry. The method is rapid, simple, selective and sensitive.     

肝癌与肝硬化腹水微量元素Cu、Zn测定的临床诊断价值

腹水是一种病理性腹腔渗出液或漏出波．肝癌、肝硬化晚期，腹膜炎等多种疾病可致病人出现腹水，由于引起腹水病因不同，腹水中各物质含量亦有所不同．关于腹水中微量元素含量的研究尚少见报道。为此作者分三组测定了４８份腹水中的Ｃｕ、Ｚｎ含量，进行了分析比较，结果如下：１．Ｃｕ含量．其它组高于肝癌组，肝癌组高于肝硬化组，各组间差异非常显著，Ｐ＜０．０１。２．Ｚｎ含量，肝癌组高于肝硬化组，肝硬化组高于其它组，各组间差异显著，Ｐ＜０．０５．３．以上结果说明，测定腹水中Ｃｕ、Ｚｎ含量是一项了解腹水性质较敏感指标，尤其是肝硬化癌变时，Ｃｕ、Ｚｎ含量有明显的变化．     

Kinetics and mechanisms of chlorine dioxide and chlorite oxidations of cysteine and glutathione

Chlorine dioxide oxidation of cysteine (CSH) is investigated under pseudo-first-order conditions (with excess CSH) in buffered aqueous solutions, p[H+] 2.7-9.5 at 25.0 degrees C. The rates of chlorine dioxide decay are first order in both ClO2 and CSH concentrations and increase rapidly as the pH increases. The proposed mechanism is an electron transfer from CS- to ClO2 (1.03 x 10(8) M(-1) s(-1)) with a subsequent rapid reaction of the CS* radical and a second ClO2 to form a cysteinyl-ClO2 adduct (CSOClO). This highly reactive adduct decays via two pathways. In acidic solutions, it hydrolyzes to give CSO(2)H (sulfinic acid) and HOCl, which in turn rapidly react to form CSO3H (cysteic acid) and Cl-. As the pH increases, the (CSOClO) adduct reacts with CS- by a second pathway to form cystine (CSSC) and chlorite ion (ClO2-). The reaction stoichiometry changes from 6 ClO2:5 CSH at low pH to 2 ClO2:10 CSH at high pH. The ClO2 oxidation of glutathione anion (GS-) is also rapid with a second-order rate constant of 1.40 x 10(8) M(-1) s(-1). The reaction of ClO2 with CSSC is 7 orders of magnitude slower than the corresponding reaction with cysteinyl anion (CS-) at pH 6.7. Chlorite ion reacts with CSH; however, at p[H+] 6.7, the observed rate of this reaction is slower than the ClO2/CSH reaction by 6 orders of magnitude. Chlorite ion oxidizes CSH while being reduced to HOCl, which in turn reacts rapidly with CSH to form Cl-. The reaction products are CSSC and CSO3H with a pH-dependent distribution similar to the ClO2/CSH system.     

印楝素的合成、结构修饰及生物活性研究进展

自印楝素被分离鉴定以来, 其广谱而独特的生物活性受到人们的广泛关注, 已成为一种近乎完美的植物源杀虫剂; 且在医药、保健、日化等领域都有广泛的应用．其复杂而独特的分子结构使得科研工作者进行了大量的全合成尝试、结构修饰及构效关系等研究. 综述了印楝素A的片段合成、全合成和印楝素有关的结构修饰以及生物活性等方面的研究进展.