Synthesis,curing, and decomposition of allylamine-adducted 3,3′-bismaleimidodiphenylsulphone resins

A series of 3,3′-bismaleimidodiphenylsulphone/allylamine (3,3′-BDS/A) adducts were prepared by reacting 3,3′-BDS with various molar percentages of allylamine (A). The reaction path, revealed by a model compound study of n-phenylmaleimide reacting with allylamine, indicates that the imido ring of 3,3′-BDS was opened by allylamine resulting in the formation of two amido groups. The infrared and mass spectra of curing 3,3′-BDS/A adducts indicate that the allylamino groups cleaved with the recovery of imido ring of 3,3′-BDS and then participated in the cure reactions. The cure reaction paths depend on the amount of allylamino groups in the 3,3′-BDS/A adducts. When it is in a small amount, the cleaved allylamines will accelerate the homopolymerization of 3,3′-BDS through the maleimide double bonds. When allylamino groups are plentiful, the cleaved allylamines might polymerize by themselves through the allyl groups. A decomposition mechanism of 3,3′-BDS/A adducts was suggested by mass spectra. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2469–2478, 1997     

Expedient Synthesis,on Large Scale,of Aliphatic Chaetomellic Anhydrides from N-Allyl-2,2-dichlorocarboxyamides

Chaetomellic anhydride A and an analog (with two additional carbons) were obtained, on a preparative scale, starting from amides derived from the acylation of 2-(2-propenylamino)pyridine with 2,2-dichloropalmitic or 2,2-dichlorostearic acid. An alternative approach, in which the methyl substituent of the target anhydride is introduced by the carboxylic acid reactant and the long aliphatic chain is added through the allylamino moiety, proved unviable.     

Synthesis and attempted polymerization of N-arylmaleimides substituted with allylamino or cyclopropylamino groups at 2-position

Several N-substituted chloromaleimides were prepared by dehydrating the corresponding chloromaleamic acids. Treatment of chloromaleimides with allylamine or cyclopropylamine produced N-aryl-2-(allylamino)maleimides and N-aryl-2-(cyclopropylamino)maleimides, respectively. Neither the N-substituted chloromaleimides nor the N-aryl-2-(allylamino) or N-aryl-2-(cyclopropylamino)maleimides polymerized free radically or anionically. The difficulty of achieving good pi-pi overlap and stiric effects at the propagation step prevented the cyclopolymerization of the prepared 1,5-dienes.     

Photodegradation of poly(amidoamine) dendrimers peripherally modified with 1,8-naphthalimide units

This paper presents the photophysical and photochemical characteristics of four new poly(amidoamine) dendrimers of zero and second generation whose periphery has been modified with 1,8-naphthalimide units. Nitro- and allylamino groups have been used as substitutents at the C-4 position of the 1,8-naphthalimide fluorophores. The discussion is focused on the photodegradation of the dendrimers in N,N-dimethylformamide and dioxan solutions. Investigations have shown that the photodegradation of the dendrimers with 4-nitro substituted 1,8-naphthalimide proceed with yellow colour development in the solvent while no colour changes followed the same process in dendrimers with allylamino group substituent. The results also show that the photostability of the dendrimers depends on their generation.     

Straightforward palladium-mediated synthesis of N-substituted 1,2-dihydrobenz[g]isoquinoline-5,10-diones

Related to our research on structural modifications of pentalongin, the active principle of the medicinal plant Pentas longiflora Oliv., a new synthesis of N-protected 1,2-dihydrobenz[g]isoquinoline-5,10-diones and their 4-methyl derivatives, which represent a new class of compounds, is reported. In both cases, the benz[g]isoquinoline skeleton was constructed by an intramolecular Heck reaction of N-protected 2-((allylamino)methyl)-3-bromo-1,4-dimethoxynaphthalenes and N-protected 2-((allylamino)methyl)-3-bromo-1,4-naphthoquinones, respectively.     

Synthesis of new borazines containing crosslinkable groups

Three new functional group containing borazine derivatives, 2,4,6-tri（allylamino）borazine, 2,4,6-tri（3-ethynylanilino）borazine, and 2,4,6-tri（4-propargyl oxyanilino）borazine were synthesized by aminolysis reaction of 2,4,6-trichloroborazine ClaB3N3H3（TCB）. The new compounds were characterized by infrared （IR） spectra, nuclear magnetic resonance （NMR）, and mass spectrometry （MS）.     

One-pot combination of the Wittig olefination with oxidation, hydrogenation, bromination, and photocyclization reactions

Co-polycondensation of tetramethoxysilane, 2-diphenyl(phosphino)ethyltri(ethoxy)silane, and N-2-(aminoethyl)-3-aminopropyltri(methoxy)silane forms a heterogenized tertiary phosphine reagent (HPR) that reacts with benzyl chlorides and aldehydes to give alkenes. This Wittig condensation can be coupled, as a one-pot process, with hydrogenation, oxidation, bromination or photocyclization.     

Molecular and crystal structure of ethyl-3(allylamino)-9,9-dimethyl-7,11-dioxo-1,5-diphenylspiro [5.5]undec-2-en-2-carboxylate

New multicomponent condensation of dimedone, benzaldehyde, acetacetic ester, and allylamine in the 1:2:1:1 molar ratio respectively is revealed. It proceeds with the formation of ethyl-3(allylamino)-9,9-dimethyl-7,11-dioxo-1.5-diphenyl-spiro[5.5]undec-2-en-2-carboxylate whose crystal structure is determined by single crystal X-ray diffraction.     

Nature of the active component in the catalytic system prepared from titanium(III) chloride(AA), ethylaluminum dichloride,and tetrakis(dimethylamino)silane,in the polymerization of propylene

The chemistry of the titanium(III) chloride(AA)–ethylaluminum dichloride–tetrakis-(dimethylamino)silane system for the polymerization of propylene was studied. A complex of ethylaluminum dichloride with tetrakis(dimethylamino)silane was isolated. It was shown that this complex contains ethylaluminum dichloride and tetrakis(dimethylamino)silane in the ratio of 2:1. This complex with titanium(III) chloride is responsible for the polymerization activity.     

The sila-explosives Si(CH2N3)4 and Si(CH2ONO2)4: silicon analogues of the common explosives pentaerythrityl tetraazide, C(CH2N3)4, and Pentaerythritol Tetranitrate, C(CH2ONO2)4

The reaction of tetrakis(chloromethyl)silane, Si(CH2Cl)4, with sodium azide afforded tetrakis(azidomethyl)silane (sila-pentaerythrityl tetraazide, Si(CH2N3)4 (1b)). Nitration of tetrakis(hydroxymethyl)silane, Si(CH2OH)4, with nitric acid resulted in the formation of tetrakis(nitratomethyl)silane (sila-pentaerythritol tetranitrate, Si(CH2ONO2)4 (2b)). Compounds 1b and 2b are extremely shock-sensitive materials and very difficult to handle. Spectroscopic data were obtained as good as sensitivity and safety allowed for umambiguous identification. Quantum chemical calculations (DFT) of the C/Si pairs C(CH2OH)4/Si(CH2OH)4, 1a/1b, and 2a/2b regarding the structures and electronic populations were performed.     

Time‐of‐flight SIMS characterization of hydrolysed organofunctional and non‐organofunctional silanes deposited on Al,Zn and Al–43.4Zn–1.6Si alloy‐coated steel

In this paper Al, Zn and Al–43.4Zn–1.6Si (AlZn) alloy‐coated steel have been treated with the organofunctional silane γ‐mercaptopropyltrimethoxysilane (γ‐MPS) and the non‐organofunctional silane 1,2‐bis(triethoxysilyl)ethane (BTSE). Also, a two‐step treatment of metal substrates was performed: the metal substrates were treated with the BTSE silane followed by a γ‐MPS treatment. The influence of metal substrate and the pH value of the silane film properties were investigated using time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS). The results show that the BTSE silane is fully hydrolysed but the γ‐MPS silane is not. The presence of negative ions of the type HSi_xO_y^? indicates that both types of silane films are highly cross‐linked via Si–O–Si bonds. The two‐step treatment gave a γ‐MPS silane layer on top of the BTSE silane layer but the thickness of the total silane film become thinner than for a single BTSE film, indicating that some of the BTSE is dissolved during the γ‐MPS deposition step. Furthermore, the ToF‐SIMS results show that the thiol group of the γ‐MPS silane is oxidized. Finally, no major influence, either in the positive or the negative mass spectra, from the different metal substrates could be detected for the silane films investigated. Copyright © 2003 John Wiley & Sons, Ltd.     

Synthesis and heterocyclization of allyl derivatives of 8-aminoquinoline

We have shown that heterocyclization of N-tosyl- and N-acetyl derivatives of 8-(allylamino)quinoline with iodine occurs with formation of 3-iodomethyl-1-p-toluenesulfonyl-2,3-dihydropyrazino[3,2,1-i,j]quinolinium and 1-acetyl-3-iodomethyl-2,3-dihydropyrazino[3,2,1-i,j]quinolinium iodides.Chelyabinsk State University, Chelyabinsk 454136. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 6, pp. 781–784, June, 1997.     

Morphology,electrical resistance,electromagnetic interference shielding and mechanical properties of functionalized MWNT and poly(urea urethane) nanocomposites

The functionalized multi‐walled carbon nanotubes (MWNT) had been prepared by free radical reaction with vinyltriethoxysilane. Polydimethylsiloxane (PDMS)‐based poly(urea urethane) (PUU) was also synthesized. PUU was further end‐capped with aminopropyltriethoxysilane (A‐silane), or with phenyltrimethoxysilane (P‐silane). Fourier transform infrared (FTIR), Raman spectra and thermogravimetric analysis (TGA) confirmed the functionalization of MWNT. The M_n and M_w of PUU were 85,123 and 235,876 g/mol, respectively. Both A‐silane end‐capped PUU and P‐silane end‐capped PUU showed improved dispersion of MWNT compared with that of PUU and MWNT. Moreover, the reduced discrepancy of surface electrical resistance of the two sides of the MWNT/PUU nanocomposite film was found due to the homogeneous dispersion of MWNT. The microwave absorption and tensile strength of MWNT/PUU were also improved by the well dispersion of MWNT in PUU matrix. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1096–1105, 2006     

Preparation, Curing Reactivity and Thermal Properties of Titanium-doped Silicone Resins

Novel titanium-doped silicone resins were synthesized from low-cost silane monomers and tetrabutyl titanate as raw materials and hydrochloric acid as catalyst, with titanium element as dopant into principal chain of Si-O-Si. The resins were characterized by means of FTIR, 1 H NMR and 13 C NMR spectra, their thermal properties and curing properties were investigated and their corresponding films were determined. The results show that the thermal stability and storage stability of the resins were influenced by the types of silane monomers containing different carbon atomicities of organic group. The thermal stability of the titanium-doped silicone resin with a molar ratio of silane monomer B(n-propyl triethoxysilane) to silane monomer C(n-octyl triethoxysilane) being 1:1 is superior to that of the resin with a molar ratio of silane monomer B to silane monomer C being 1:3. However, the storage stability of the former is inferior to that of the latter.This work also showed that the synthesized titanium-doped silicone resins have the highest thermal stability up to 450―500 °C with an atomicity molar ratio of 1:4 of titanium to silicon in the reactants. But the best storage stability of the resin prepared from the reactants with an atomicity molar ratio of 1:6[n(Ti):n(Si)] was obtained. The effect of the type and content of curing agent on the curing properties of the resin was also studied. Moreover, thermal mechanism and curing mechanism were proposed in this work.     

XPS and AES characterization of hydrolysed γ‐mercaptopropyltrimethoxysilane deposited on Al,Zn and Al–43.4Zn–1.6Si alloy‐coated steel

In this paper Al, Zn and Al–43.4Zn–1.6Si (AlZn) alloy‐coated steel have been treated with the organofunctional silane γ‐mercaptopropyltrimethoxysilane (γ‐MPS). The influence of different metal substrates on the structure and composition of the silane films was investigated with XPS and AES. The films were obtained by dipping the substrates in the silane solution followed by a blow‐dry procedure in nitrogen gas. The results show that the surface concentration of the deposited silane is independent of the metal substrate and that the thickness of the silane film is non‐uniform. The AES measurements indicate that the silane film covers the entire substrate surface and XPS analysis of the silane‐treated substrate surfaces at different take‐off angles indicates that the γ‐MPS molecule is randomly orientated. Also, the results show that the silane is well hydrolysed under the solution conditions used. Finally, in the zinc‐containing silane‐metal systems, i.e. the silane‐treated AlZn and Zn substrates, the results indicate that the γ‐MPS molecules can bond to the substrate surfaces via the thiol group of the molecule. Copyright © 2004 John Wiley & Sons, Ltd.     

Synthesis of N-heterocyclic compounds via ene-yne metathesis reactions

Propargylamino and allylamino derivatives of cyclohexene and norbornene were subjected to tandem metathesis reactions with first and second generation Grubbs' catalysts 1 and 2. Results show that the method is compatible with suitably protected nitrogen-containing compounds. Cyclohexenes gave intriguing results in terms of the possibility to perform ring rearrangement metathesis (RRM) reactions, showing a difference with the analogous allyl and propargyl ether substrates.     

Formation of hypervalent complexes of trifluorosilanes with pyridine and with 4-methoxypyridine, through intermolecular silicon...nitrogen interactions

Herein we report that trifluorohexylsilane (2), trifluorophenylsilane (3) and trifluoro(pentafluorophenyl)silane (4) form new hypervalent complexes with pyridine (py) and with 4-methoxypyridine (MeO-py), through intermolecular Si...N interactions. In general, stronger and more efficient binding is observed for the more electron poor (Si atom in) silane 4 and for the more electron rich (N atom in) 4-methoxypyridine. Binding constants of 15+/-2, 25+/-5, and 550+/-100 M(-1) at 25 degrees C in benzene were measured for the formation of the pentacoordinate 2.py, 3.py, and 3.MeO-py complexes, respectively. In addition, silane 3 also forms the hexacoordinate 3-2py and 3-2MeO-py complexes at low temperatures and silane 4 forms the 4-2py complex below room temperature and the 4-2MeO-py complex already at room temperature and in a high concentration. The various types of hypervalent complexes and different binding strengths described here for silanes 2-4 and previously for trifluoro(phenylethynyl)silane (1) and the possibility to modulate the binding modes (penta- vs hexacoordination) of these complexes (by the type of amine used, concentration, and the temperature applied) suggest that such new intermolecular Si...N interactions could be used as efficient and versatile binding motifs in supramolecular chemistry.     

Hydrolysis-Condensation Kinetics of Different Silane Coupling Agents

Abstract

The hydrolysis kinetics of 14 alkoxy silane coupling agents were carried out in an ethanol:water 80:20 (w/w) solution under acidic conditions and were monitored by ¹H, ¹³C, and ²⁹Si NMR spectroscopy. Acidic conditions were selected in order to enhance the silanol formation and to slow down the self-condensation between the resulting hydrolysed silanol groups. In situ ²⁹Si NMR spectroscopy allowed the determination of the intermediate species as a function of the reaction time. Thus, the following silane coupling agents were studied: 3-methacryloxypropyl trimethoxy silane (MPMS), 3-mercaptopropyl trimethoxy silane (MRPMS), 3-cyanopropyl triethoxy silane (CPES), triethoxy vinyl silane (VES), trimethoxy (2-phenylethyl) silane (PEMS), octyl triethoxy silane (OES), trimethoxy (7-octen-1-yl) silane (OEMS), 3-aminopropyl triethoxy silane (APES), 3-aminopropyl trimethoxy silane (APMS), 3-(2-aminoethylamino)propyl trimethoxy silane, (DAMS), 3-[2-(2-aminoethylamino)-ethylamino]propyl trimethoxy silane (TAMS), 4-amino-3,3-dibutyl trimethoxy silane (ADBMS), trimethoxy [3-(phenylamino)propyl] silane (PAPMS), and triethoxy-3-(2-imidazolin-1-yl) propyl silane (IZPES). A parameter quantifying the grafting potentiality of each silane coupling agent towards OH-rich solid substrates (such as cellulose) was established as a function of the nature of the alkoxy groups (methoxy or ethoxy), as well as that of the fourth substituent (vinyl, aminopropyl, etc.) of the silane studied.

GRAPHICAL ABSTRACT     

Cyclopolymerization. VI. Preparation and Properties of Crosslinked Polyamines by Cyclopolymerization

Crosslinked polymer and copolymers containing tertiary amino groups were prepared from a number of allylamino monomers by cyclopolymerization. The effects of the initiator residue, reaction conditions, monomer structure, and degree of crosslinking on specific properties such as ion-exchange capacity, pKa, and range of nitrogen basicities were investigated.     

How to prepare reproducible, homogeneous, and hydrolytically stable aminosilane-derived layers on silica

Five functional silanes--3-aminopropyltriethoxysilane (APTES), 3-aminopropyltrimethoxysilane (APTMS), N-(2-aminoethyl)-3-aminopropyltriethoxysilane (AEAPTES), N-(2-aminoethyl)-3-aminopropyltrimethoxysilane (AEAPTMS), and N-(6-aminohexyl)aminomethyltriethoxysilane (AHAMTES)--were assessed for the preparation of hydrolytically stable amine-functionalized silica substrates. These can be categorized into three groups (G1, G2, and G3) based on the intramolecular coordinating ability of the amine functionality to the silicon center. Silanizations were carried out in anhydrous toluene as well as in the vapor phase at elevated temperatures. Aminosilane-derived layers prepared in solution are multilayers in nature, and those produced in the vapor phase have monolayer characteristics. In general, vapor-phase reactions are much less sensitive to variations in humidity and reagent purity, are more practical than the solution-phase method, and generate more reproducible results. Intramolecular catalysis by the amine functionality is found to be important for both silanization and hydrolysis. The primary amine group in the G1 silanes (APTES and APTMS) can readily catalyze siloxane bond formation and hydrolysis to render their silane layers unstable toward hydrolysis. The amine functionality in the G3 silane (AHAMTES) is incapable of intramolecular catalysis of silanization so that stable siloxane bonds between the silane molecules and surface silanols do not form easily. The secondary amine group in the G2 silanes (AEAPTES and AEAPTMS), on the other hand, can catalyze siloxane bond formation, but the intramolecular catalysis of bond detachment is sterically hindered. The G2 silanes are the best candidates for preparing stable amine-functionalized surfaces. Between the two G2 aminosilanes, AEAPTES results in more reproducible silane layers than AEAPTMS in the vapor phase due to its lower sensitivity to water content in the reaction systems.