Structure and Properties of Solid Solutions in the System YBaCuFeO<Subscript>5</Subscript>-YBaCuCoO<Subscript>5</Subscript>

The crystal structure parameters of solid solutions YBaCuFe_{1 − x} Co_xO₅ (0 ≤ x ≤ 1) were determined, and their thermal stability, thermal expansion, conductance, thermoelectromotive force, dielectric properties, and magnetic sensibility were studied.__________Translated from Zhurnal Prikladnoi Khimii, Vol. 78, No. 5, 2005, pp. 716–720.Original Russian Text Copyright © 2005 by Chizhova, Klyndyuk, Bashkirov, Petrov, Yanushkevich.     

Solid Electrolytes Based on KAlO<Subscript>2</Subscript>-TiO<Subscript>2</Subscript>: The Crystalline Structure and Conduction

The structure of solid high-conductance potassium electrolytes K_{1 − x} Al_{1 − x} Ti_xO₂ (x = 0.1; 0.2) at 25 and 575°C is studied by a powder neutron diffraction analysis with the application of full-profile Rietveld analysis. Inserting titanium ions removes in potassium aluminate the phase transition at 540°C and the conductance anisotropy typical for its low-temperature form. Both structures are identical (fcc lattice, space group Fd3m). Experiment and calculation coincide best under the assumption that the potassium sublattice is disordered. The conductance increase upon inserting ions Ti⁴⁺ is due, apart from stabilization of the fcc structure, to formation of additional potassium vacancies and larger channels for the migration of potassium cations (ions Ti⁴⁺ are larger than ions Al³⁺).__________Translated from Elektrokhimiya, Vol. 41, No. 7, 2005, pp. 878–883.Original Russian Text Copyright © 2005 by Burmakin, Voronin, Akhtyamova, Berger, Shekhtman.     

Thermodynamic study of Cu-Tl-Te system using EMF technique with Cu<Subscript>4</Subscript>RbCl<Subscript>3</Subscript>I<Subscript>2</Subscript> solid electrolyte

The EMF method with a solid Cu⁺-conducting electrolyte of Cu₄RbCl₃I₂ was sued to study the Cu-Tl-Te system in the temperature range of 300–420 K. A diagram of solid-phase equilibriums of this system is constructed, partial molar functions of copper in alloys, standard thermodynamic functions of formation and standard entropies of CuTlTe₂, CuTl₄Te₃, Cu₂TlTe₂, Cu₃TlTe₂, Cu₉TlTe₅ triple compounds and Cu _x Tl_{5 − x} Te₃ solid solutions (0 < x < 1) are calculated. The obtained results confirmed the assumption as to the possibility of using this modification for the EMF technique for thermodynamic studies of copper-containing triple systems, even if they contain a less noble component than copper.     

On the Possibility of Using Protonic Solid Electrolyte CsHSO<Subscript>4</Subscript> in Hydrogen Fuel Cells

Electrochemical parameters of an H₂|air fuel cell with a membrane of solid electrolyte CsHSO₄ or composites (1 − x)CsHSO₄/xSiO₂ (x = 0.1–0.3) and different electrodes are measured at 175 °C. The maximal power (3.5 mW/cm² at a voltage of 0.6 V) is obtained for a cell with platinum-black electrodes and an intermediate layer of a mixture of platinum black and the electrolyte material. In the absence of a platinum catalyst, CsHSO₄ and composites CsHSO₄/SiO₂ are chemically stable in hydrogen at the operating temperature of the fuel cell.__________Translated from Elektrokhimiya, Vol. 41, No. 5, 2005, pp. 556–559.Original Russian Text Copyright © 2005 by Lavrova, Russkikh, Ponomareva, Uvarov.     

The heat capacity of solid antimony telluride Sb<Subscript>2</Subscript>Te<Subscript>3</Subscript>

The literature data on the heat capacity of solid antimony telluride over the range 53–895 K were analyzed. The heat capacity of Sb₂Te₃ was measured over the range 350–700 K on a DSM-2M calorimeter. The equation for the temperature dependence was suggested. The thermodynamic functions of Sb₂Te₃ were calculated over the range 298.15–700 K.     

Electrochemical deposition of Bi<Subscript>2</Subscript>Te<Subscript>3</Subscript> for thermoelectric microdevices

The electrolyses of solutions of bismuth oxide and tellurium oxide in nitric acid with molar ratios of Bi:Te=3:3–4:3 lead to cathodic deposits of films of bismuth telluride (Bi₂Te₃), an n-type semiconductor. Current densities of 2–5 mA/cm² were applied. Voltammetric investigations showed that Bi₂Te₃ deposition occurred at potentials more negative than −0.125 V (Ag/AgCl, 3 M KCl). The deposit was identified as bismuth telluride (γ-phase) by X-ray analysis. Hall-effect measurements verified the n-type semiconducting behaviour. The films can be deposited in microstructures for thermoelectric microdevices like thermoelectric batteries or thermoelectric sensors.     

Forms of iron occurrence in a series of binary tellurides Fe<Subscript>x</Subscript>Ti<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Te<Subscript>1.45</Subscript>

Nonstoichiometric tellurides Fe_xTi_1–x Te_1.45 synthesized at 850°C were studied by X-ray phase and X-ray fluorescence analysis and by ⁵⁷Fe Mössbauer spectroscopy. The mutual iron-titanium substitution is limited in this series. The system contains four individual phases in which iron is in three different states: Fe²⁺ in an asymmetric environment, Fe²⁺ in a symmetric environment, and Fe⁰. The distribution of various iron states in the system depends not only on the Fe : Ti ratio, but also on the structure of phases.Translated from Zhurnal Obshchei Khimii, Vol. 74, No. 11, 2004, pp. 1761–1764.Original Russian Text Copyright © 2004 by Pankratova, Zabolotnaya, Panchuk, Semenov, Zvinchuk, Suvorov.This revised version was published online in April 2005 with a corrected cover date.     

Microstructure and Conduction of Composites Bi<Subscript>2</Subscript>CuO<Subscript>4</Subscript>-Bi<Subscript>2</Subscript>O<Subscript>3</Subscript> Near the Eutectic Melting Point

Microstructure and conduction of ceramic composites Bi₂CuO₄ + xBi₂O₃ (x = 5, 10, 15, 20 wt %) near the eutectic melting point (770°C) are studied. Bismuth oxide, initially randomly distributed over the ceramics bulk, after quenching from temperatures exceeding the eutectic melting point, becomes localized at triple junctions and grain boundaries in Bi₂CuO₄, which is caused by wetting grain boundaries and forming a liquid-channel structure. The jumpwise change in the composites’ conductivity near 730 and 770°C caused by polymorphic transformation of Bi₂O₃ and the eutectic melting with simultaneous formation of a liquid-channel structure. Transport numbers of the oxygen ion are measured at 770°C by coulomb-volumetric method. The conduction by oxygen ions increases in the composites with decreasing average size of Bi₂CuO₄ crystallites.__________Translated from Elektrokhimiya, Vol. 41, No. 5, 2005, pp. 596–601.Original Russian Text Copyright © 2005 by Lyskov, Metlin, Belousov, Tret’yakov.     

Phase formation in the V<Subscript>2</Subscript>O<Subscript>5</Subscript>-Ta<Subscript>2</Subscript>O<Subscript>5</Subscript>-MoO<Subscript>3</Subscript> system

Solid-phase interactions in the V₂O₅-Ta₂O₅-MoO₃ system were studied. The formation of com- pounds TaVO₅ and VTa₉O₂₅ in the V₂O₅-Ta₂O₅ binary system was verified. Tetragonal VTa₉O₂₅-base solid solutions of the general formula Ta_{5 + 4x} V_{5 − 4x} O₂₅ (x = 0.25–1) and TaVO₅-base solid solutions of the general formula Ta _x Mo_{1 − x} V_{2 − x} O_{8 − 3x} (x = 0.625–1) were found to form. Subsolidus phase equilibria in the V₂O₅-Ta₂O₅-MoO₃ were determined.     

ESR Study of the Formation of O<Stack><Subscript>2</Subscript><Superscript>−</Superscript></Stack> Radical Anions on Oxidized CeO<Subscript>2</Subscript> and CeO<Subscript>2</Subscript>/ZrO<Subscript>2</Subscript> Adsorbing a CO + O<Subscript>2</Subscript> Mixture

It is demonstrated by ESR measurements that O ₂ ⁻ (CO + O₂) radical anions result from CO + O₂ adsorption on the oxidized surface of CeO₂. These radical anions are stabilized in the coordination sphere of Ce⁴⁺ cations located in isolated and associated anionic vacancies. This reaction shows an activation behavior determined by CO adsorption. The variation of O ₂ ⁻ (CO + O₂) concentration with CO adsorption temperature suggests that surface carbonates and carboxylates participate in this reaction. In the (0.5– 10.0)%CeO₂/ZrO₂ system, O ₂ ⁻ forms on supported CeO₂ and is stabilized on Ce⁴⁺ and Zr⁴⁺ cations. The stability of O ₂ ⁻ -Ce⁴⁺ complexes is lower on supported CeO₂ than on unsupported CeO₂, indicating a strong interaction between the cerium cations and the support.__________Translated from Kinetika i Kataliz, Vol. 46, No. 3, 2005, pp. 423–429.Original Russian Text Copyright © 2005 by Il’ichev, Kuli-zade, Korchak.     

Phase relations in the Zn<Subscript>2</Subscript>V<Subscript>2</Subscript>O<Subscript>7</Subscript>-Cu<Subscript>2</Subscript>V<Subscript>2</Subscript>O<Subscript>7</Subscript> system from room temperature to melting

Phase relations in the Zn₂V₂O₇-Cu₂V₂O₇ system were studied by high-temperature X-ray diffraction and differential thermal analysis. The major phase constituents of the system are solid solutions based on Zn₂V₂O₇ and Cu₂V₂O₇ polymorphs and their coexistence regions. The generation of α-Zn_{2 − 2x} Cu_2x V₂O₇ solid solution, where 0 ≤ x ≤ 0.30, leaves almost unchanged the stabilization temperature of the high-temperature zinc pyrovanadate phase. The α-Cu_{2 − 2x} Zn_2x V₂O₇ homogeneity range is 5 mol % Zn₂V₂O₇. In the range 0.050 ≤ x ≤ 0.09 from 20 to ∼ 620°C, there is the two-phase field of α-Cu₂V₂O₇ and β-Cu₂V₂O₇ base solid solutions. At still higher temperatures, β-Zn_{2 − 2x} Cu_2x V₂O₇ and α-Cu_{2 − 2x} Zn_2x V₂O₇ coexist in the mixed-phase region. β-Zn_{2 − 2x} Cu_2x V₂O₇ solid solution, where 0 ≤ x ≤ 0.30, exists above 610 ± 5°C. The extent of the β′-Cu₂V₂O₇-base solid solution is 9 to 65 mol % Zn₂V₂O₇ at 615 ± 5°C, expanding to 0 mol % Zn₂V₂O₇ with rising temperature. Original Russian Text ￠ T.I. Krasnenko, M.V. Rotermel’, S.A. Petrova, R.G. Zakharov, O.V. Sivtsova, A.N. Chvanova, 2008, published in Zhurnal Neorganicheskoi Khimii, 2008, Vol. 53, No. 10, pp. 1755–1762.     

Reaction of <Emphasis Type="Italic">N</Emphasis>-Sulfinyltrifluoromethanesulfonamide CF<Subscript>3</Subscript>SO<Subscript>2</Subscript>N=S=O with Carbonyl Compounds

N-Sulfinyltrifluoromethanesulfonamide CF₃SO₂N=S=O reacts with salicylaldehyde, 2-furaldehyde, 2-thiophenecarbaldehyde, 3-methyl-1-phenyl-1H-pyrazole-4-carbaldehyde, and 2-phenyl-2H-1,2,3-triazole-4-carbaldehyde to afford the corresponding N-aryl(hetaryl)methylidenetrifluoromethanesulfonamides in high yields. Reactions of the latter with aniline give no adducts at the C=N bond but transamination products. The reaction of trifluoromethanesulfonamide with phenyl isocyanate led to formation of N,N′-diphenylurea instead of expected N-phenyl-N′-(trifluoromethylsulfonyl)urea.__________Translated from Zhurnal Organicheskoi Khimii, Vol. 41, No. 7, 2005, pp. 1006–1010.Original Russian Text Copyright © 2005 by Shainyan, Tolstikova.     

Second Dissociation Constant of H<Subscript>2</Subscript>Te and the Absorption Spectra of HTe<Superscript>–</Superscript>, Te<Superscript>2–</Superscript> and Te<Subscript>2</Subscript><Superscript>2–</Superscript> in Aqueous Solution

We have measured the second acid dissociation constant, K _2a , at several ionic strengths for hydrogen telluride (H₂Te) using the Charge Transfer to Solvent (CTTS) uv spectra of its anions HTe⁻ and Te²⁻. Since it is produced in our solutions, we have also determined the spectra of Te₂ ²⁻ both in the uv and in the visible regions. At 25 ^∘C, K _2a = (1.28 ± 0.02) × 10⁻¹² by extrapolation to zero ionic strength. Its value at an ionic strength equal to 0.5 mol.dm^-3 was estimated to be (8.7 ± 0.2) × 10⁻¹². The solution thermodynamics of these species are also discussed and comparisons are made to related acids.     

Ion Transfer in CdF<Subscript>2</Subscript>-based Iso- and Polyvalent Solid Solutions

The ionic conductivity of solid solution Cd_0.77Sr_0.23F₂ is 1.6 × 10⁻⁴ S/cm at 500 K. The conduction mechanism changes from a vacancy mechanism to an interstitial one at 523–553 K. In solid solutions Cd_0.9R_0.1F_2.1 (R = La-Lu, Y), the activation enthalpy of conduction decreases from 0.9 to 0.8 eV with decreasing ionic radius of R³⁺, raising the 500-K conductivity from 6 ×10⁻⁶ S/cm for La³⁺to 6 × 10⁻⁵ S/cm for Lu³⁺. For crystalline Cd_0.95In_0.05F_2.05, ionic and electronic conductivities at 313 K equal 5 × 10⁻⁴ and 5 − 10⁻⁶ S/cm.__________Translated from Elektrokhimiya, Vol. 41, No. 5, 2005, pp. 627–632.Original Russian Text Copyright © 2005 by Sorokin, Buchinskaya, Sul’yanova, Sobolev.     

Conduction and Ion Transport in LaYO<Subscript>3</Subscript> Doped with CaO

Values of partial conductions (ionic: protonic, oxygen, hole) and their activation energies in LaYO₃ are determined at 700–1050°C, pO₂ ranging from air to 10⁻¹⁵ Pa, and pH₂O = 0.04–13.5 kPa for different versions of doping with calcium (when introduced into the lanthanum or yttrium sublattices, or into both sublattices simultaneously). The conductivity increases in the series La_0.97Ca_0.03YO_{3 − α} < LaY_0.97Ca_0.03O_{3 − α} < La_0.985Y_0.985Ca_0.03O_{3 − α}, which means that the stoichiometric composition with a 1 : 1 ratio between Y and La has the highest conductivity.__________Translated from Elektrokhimiya, Vol. 41, No. 5, 2005, pp. 610–615.Original Russian Text Copyright © 2005 by Balakireva, Stroeva, Gorelov.     

Synthesis of nonequilibrium Ir<Subscript>x</Subscript>Re<Subscript>1-x</Subscript> solid solutions. Crystal structure of [Ir(NH<Subscript>3</Subscript>)<Subscript>5</Subscript>Cl]<Subscript>2</Subscript>[ReCl<Subscript>6</Subscript>]Cl<Subscript>2</Subscript>

Synthesis of five binary complex salts with an [Ir(NH₃)₅Cl]²⁺ complex cation is described. The counterions are [ReCl₆]^2–, [IrCl₆]^2–, [ReBr₆]^2–, and Cl^–. A polycrystal X-ray diffraction study has been performed for [Ir(NH₃)₅Cl]₂[ReCl₆]Cl₂, and its crystal structure has been determined. A series of Ir _x Re_1–x phases (0.5 x > 1) were obtained by reductive thermolysis. For the Ir-Re system, the history of the V/Z(x) dependence has been refined.Original Russian Text Copyright © 2004 by S. A. Gromilov, S. V. Korenev, I. V. Korolkov, K. V. Yusenko, and I. A. BaidinaTranslated from Zhurnal Strukturnoi Khimii, Vol. 45, No. 3, pp. 508–515, May–June 2004.     

NaBO<Subscript>2</Subscript>-Na<Subscript>2</Subscript>CO<Subscript>3</Subscript>-Na<Subscript>2</Subscript>MoO<Subscript>4</Subscript>-Na<Subscript>2</Subscript>WO<Subscript>4</Subscript> quaternary system

This is the first study of the NaBO₂-Na₂CO₃-Na₂MoO₄-Na₂WO₄ quaternary system by differential thermal analysis. Na₂[MoO_4(x)WO_{4(1 − x)}] solid solutions in the quaternary system are found to not decompose.     

Synthesis,crystal and molecular structure and magnetic properties of an extended two-dimensional fumarato-bridged polymeric cobalt(II) complex [Co(μ-fumarato)(γ-methylpyridine)<Subscript>2</Subscript>(H<Subscript>2</Subscript>O)<Subscript>2</Subscript>]<Subscript>∞</Subscript>

An extended hydrogen-bonded two-dimensional fumarato-bridged complex [Co(μ-fumarato)(γ-methylpyridine)₂(H₂O)₂]_∞ has been synthesized and its crystal structure determined by single crystal X-ray analysis. The X-ray analysis reveals that the cobalt atom is positioned in distorted octahedral surroundings. An extended twodimensional structure was formed through interchain hydrogen bonding. Magnetic measurements showed the presence of weak antiferromagnetic exchange interactions between the cobalt(II) ions within the chain, based on the spin Hamilitonian H = −2J ∑ S_i S_{i+ 1} (J = − 0.22 cm⁻¹).     

Computer Simulation of the Absorption of CO<Subscript>2</Subscript> Molecules by Water Cluster: 1. The Stability

The (CO₂)_i(H₂O)₁₀ clusters with the kinetic energy corresponding to a temperature of 233 K is simulated by the molecular dynamics method. The stability of these clusters with respect to thermal, mechanical, and dielectric perturbations, as well as to the absorption of CO₂ molecules, is studied. It is shown that the cluster composed of 10 water molecules remains thermodynamically stable if it captures one or two CO₂ molecules. Clusters are absolutely unstable when 3 ≤ i ≤ 9. A metastable state of clusters is achieved at i > 9.__________Translated from Kolloidnyi Zhurnal, Vol. 67, No. 3, 2005, pp. 308–314.Original Russian Text Copyright © 2005 by Galashev, Rakhmanova, Chukanov.     

Crystal chemistry, modulated structure, and electrical conductivity in the oxygen excess scheelite-based compounds La1−xThxNbO4+x/2 and LaNb1−xWxO4+x/2

For La_1−xTh_xNbO_4+x/2, three phases with broad homogeneity regions occur, for 0.075 ≤ x ≤ 0.37, 0.41 < x < 0.61, and 0.65 ≤ x ≤ 0.74. All are related to the scheelite structure type, with at least the first exhibiting an incommensurate structural modulation. An analogous structurally modulated phase was found for LaNb_1−xW_xO_4+x/2 for 0.11 ≤ x ≤ 0.22. Additional phases occur at La_0.2Th_0.8NbO_4.4 and LaNb_0.4W_0.6O_4.3. The electrical conductivity and the direction and wavelength of the structural modulation have been characterized for the La_1−xTh_xNbO_4+x/2 phase with 0.075 ≤ x ≤ 0.37.