水平磁场对双层流体热毛细对流的影响

三维数值研究了零重力时水平温度梯度作用下,B2O3封闭液与InP熔液组成的双层流体系统在水平磁场作用下的热毛细对流.结果显示,当磁场强度较小时,上层流体中对流涡的结构变化其微,而下层流体中的逆对流涡得到了抑制;随着磁场的增强,温度场分布逐渐趋于均匀,涡量强度逐渐减小,表明热毛细对流强度逐步地得到削弱.当磁场增强列Bx=0.4 T时,上层流体中的对流涡较均匀地充满上层流体区,而下层流体中对流涡紧贴着交界面.     

Diffraction of plane waves by the interface between black and soft/hard semi-planes

A theory of scattering, based on the non-perturbation of the incident field, is developed for the black bodies. The method is applied to the diffraction problem of plane waves by an interface between the black and soft/hard half-planes. The solutions are obtained in terms of infinite series and then transformed into Fresnel integrals. The scattered fields are investigated numerically.     

间隙区域的流动结构对压气机气动性能的影响

以一单级轴流压气机实验台为研究对象,对其内部流动进行了全工况的数值模拟。数值计算结果与实验测量结果对比分析表明程序很好地预测出了单级压气机的总性能和基元性能。数值分析峰值效率和失速边界工况下动叶和静叶间隙区域流动结构的变化表明:随着压气机的运行工况由峰值效率点向失速边界点移动,动、静叶间隙泄漏涡向下游发展过程中产生的阻塞效应明显增强,该阻塞效应是导致压气机失速的主要原因。     

Preliminary study of two immiscible liquid layers subjected to a horizontal temperature gradient

Marangoni convection, driven by interfacial instability due to a surface tension gradient, presents a significant problem in the crystal growth process. To achieve better materials processing, it is necessary to suppress and control this convection, especially in crystal growth using Liquid Encapsulated Czochralski techniques in which the melt is encapsulated in an immiscible medium. Marangoni convection can occur at the liquid-liquid interface and at the gas-liquid free surface. Buoyancy driven convection can also affect and complicate the flow. The present report studied Marangoni convection in a two-liquid layer system in an open and enclosed cavity. Flow in the cavity was subjected to a horizontal temperature gradient. Interactive flow near the liquid-liquid interface was measured by the Particle Image Velocimetry (PIV) technique. The measured flow field is in good agreement with numerical predictions.     

Ions at helium interfaces

The boundaries between different phases of condensed helium provide an interesting testing ground for studying ions in a quantum matter matrix. Here we consider the simplest positive and negative ions in helium — snowballs and electron bubbles, respectively — being trapped at the liquid-liquid interface of phaseseparated³He–⁴He mixtures and at the liquid-solid interface of⁴He. A comparison of experimental results for the trapping with predictions of the snowball and the bubble models shows that the models are in qualitative accord with the observations, but disagree in detail. It is suggested to use such studies for refinements of the ion models. In addition multielectron bubbles (=mesoscopic ions) and electrons on helium films are briefly discussed.     

Linear stability analysis on a spherical particle growing from a binary melt under the far-field flow

The solutions of temperature and solute fields around a spherical crystal growing from a binary melt under the far-field flow are obtained.Based on the results,a linear stability analysis on the spherical interface growing from the binary melt under the far-field flow is performed.It is found that the constitutional supercooling effect ahead of the spherical crystal interface under the far-field flow is enhanced compared with that without the flow.The growth rate of the perturbation amplitude at the up-wind side of the spherical crystal interface is larger than that at the down-wind side.The critical stability radius of the crystal interface decreases with the increasing far-field flow velocity.Under the far-field flow,the whole spherical interface becomes more unstable compared with that without the flow.     

单级高负荷向心透平三维黏性非定常计算

对一台单级高负荷向心透平进行了三维黏性定常和非定常计算,计算得到的动叶出口以及下游的周向平均流场与文献提供的实验结果符合良好。在此基础上对流动的非定常特性进行了分析,发现由于动叶转速较高,且动叶下游不存在下一级静叶的干涉,流动的非定常效应主要体现在叶片排之间的区域以及动叶通道进口,动叶出口以及下游流动的非定常特性并不明显。非定常计算结果透平的级效率随时间的波动幅度达到了1.3%。     

不同磁致纵向涡形式对空气对流换热的影响

为揭示不同磁致纵向涡对通道内空气对流换热的影响规律,分别就两极和四极钕铁硼永磁体作用下的矩形通道内的对流换热进行了数值模拟。模拟以通道入口段的流动和换热为对象,得到了不同Re和不同壁温下的流场和温度场, 对流换热的Nu和阻力系数,以及场协同数Fc。结果表明,不同纵向涡形式下的流场和温度场的协同性不同,具有八纵向涡形式的对流换热的协同性优于四纵向涡形式,强化效果也优于四纵向涡。     

Recent Developments in Flow Injection/Sequential Injection Liquid-Liquid Extraction for Atomic Spectrometric Determination of Metals and Metalloids

Abstract

This review aims to provide a critical overview of automated flow injection and sequential injection liquid-liquid extraction for preconcentration and/or separation of ultra-trace metal and metalloid species hyphenated with atomic spectrometric detection systems, including some new trends and applications in the subbranches of cloud point extraction (CPE), wetting film extraction (WFE), supported liquid membrane extraction (SLME), extraction chromatography (EChr), and liquid-phase microextraction (LPME) techniques. The analytical performance of flow-injection/sequential injection liquid-liquid extraction methods is markedly affected by the components of the flow network such as segmentor, extraction coil, and phase separator. Thus, an overall presentation of system components along with some novel strategies for interface with atomic spectrometers is discussed and exemplified with selected applications.     

磁场对水平温度梯度下双层流体热对流的影响

在水平温度梯度下,双层流体交界面的表面张力会出现梯度,驱动热毛细对流运动,造成热剪切层内的扰动.本文数值模拟了不同重力条件下,双层流体内的对流现象,得出了在微重力时,对流运动将引起热剪切层内强烈的扰动.为了减弱这种扰动,我们利用磁场对流体的运动进行控制.为此,又对微重力条件下,不同方向应用磁场下的热剪切层内扰动行为进行了数值研究,结果显示,磁场对热剪切层稳定性有促进作用,加入法向的应用磁场最为有效.     

多孔介质内轴对称流动与相变传热过程的双倒易边界元数值模拟

本文将轴对称双倒易边界元方法拓展应用于数值模拟多孔介质内轴对称的流动与相变传热过程,得到了其内非稳态温度场、压力场和速度场,及相变界面时间推进图象。     

Cavitation bubble collapse in a vicinity of a liquid-liquid interface – Basic research into emulsification process

The initial motivation for the study was to gain deeper understanding into the background of emulsion preparation by ultrasound (cavitation). In our previous work (Perdih et al., 2019) we observed rich phenomena occurring near the liquid-liquid interface which was exposed to ultrasonic cavitation. Although numerous studies of bubble dynamics in different environments (presence of free surface, solid body, shear flow and even variable gravity field) exist, one can find almost no reports on the interaction of a bubble with a liquid-liquid interface. In the present work we conducted a number of experiments where single cavitation bubble dynamics was observed on each side of the oil-water interface. These were accompanied by corresponding simulations. We investigated the details of bubble interface interaction (deformation, penetration). As predicted, by the anisotropy parameter the bubble always jets toward the interface if it grows in the lighter liquid and correspondingly away from the interface if it is initiated inside the denser liquid. We extended the analysis to the relationships of various bubble characteristics and the anisotropy parameter.Finally, based on the present and our previous study (Perdih et al., 2019), we offer new insights into the physics of ultrasonic emulsification process.     

A hybrid level set-volume constraint method for incompressible two-phase flow

A second-order hybrid level set-volume constraint method (HLSVC) for numerically simulating deforming boundaries is presented. We combine the HLSVC interface advection algorithm with a two phase flow solver in order to numerically capture deforming bubbles and drops whose actual volume (s) fluctuate about fixed “target” volume (s). Three novel developments are described: (1) a new method for enforcing a volume constraint in which the number of bubbles and drops can change due to merging or splitting, (2) a new, second order, semi-lagrangian narrow band level set reinitialization algorithm, and (3) validation of a two-phase flow numerical method by comparison with linear stability analysis results for a co-flowing liquid jet in gas. The new interface capturing method is tested on benchmark problems in which the velocity is prescribed (passive advection of interfaces) and in which the velocity is determined by the incompressible Navier–Stokes equations for two-phase flow. The error in interface position when using the hybrid level set-volume constraint method is reported for many benchmark problems in polar coordinates, cylindrical coordinates, and on an adaptive grid in which one criteria of adaptivity is the magnitude of the interface curvature.     

水平管内油水两相流流型及其转换规律研究

本文对水平放置圆管内的油水液液两相流的流型及其转变特性进行了实验研究,定义了不同流动条件下油水两相流的流型,并由实验所得数据给出了水平圆管内油水液液两相流的流型图。进而讨论了各流型之间的转变机理,并考察了影响流型的因素。采用无量纲准则数以及半理论公式对流型转变进行了预测,结果与实验数据基本吻合。并与他人的实验数据也进行了比较。     

A molecular dynamics study of effective parameters on nano-droplet surface tension

The main purpose of this paper is to numerically study the effect of droplet radius, temperature, and surface wettability on droplet surface tension. Moreover, the validity of Young-Laplace equation (Y-L) for nano-droplet is examined. Simulations of droplet surrounded by its vapor and droplet on solid surface are carried out and the results are compared to each other in order to comprehend the role of surface wettability on droplet surface tension. The pair potential for the liquid-liquid and liquid-solid interaction is considered using Lennard-Jones model. Different numbers of atoms and surface wettabilities are employed to generate droplet of different radiuses. In addition, contact angle of droplet on solid surface is computed. Pressure tensor and density profile is locally calculated. Furthermore, liquid pressure is evaluated far from the interface using the virial theorem and gas pressure is obtained using an equation of state. In order to calculate the surface tension, two different approaches are employed; Young-Laplace equation and direct molecular dynamics (MD) simulation. The surface tension increases with increase in droplet radius and it is seen that the surface wettability does not directly influence the surface tension.     

Analysis of natural frequency for imaging interface in liquid lens

Transmission beam can be modulated at the liquid–liquid interface inside an electrowetting liquid lens. The fluctuation characteristics of the interface has a decisive effect on the beam modulation. A closed cylinder in capillary constant scale is analyzed and the natural frequencies of a flat interface are obtained using capillary wave hydrodynamics. Results in modes0 and 1 are in good agreement with previous experiments in the literature. The influences of the radius, the height ratio and the height-to-diameter ratio of a liquid lens on the interface eigenfrequencies are analyzed.     

交变热流下燃烧室外对流传热特性数值研究

采用数值计算对水对流换热边界下天然气燃烧及外部对流传热特性进行了研究。研究了相同燃烧功率不同水入口流速下燃烧及传热特性,得到各个区域交界面温度分布及燃烧室内辐射换热与对流换热占总换热量比例。对天然气高温空气燃烧技术在工业锅炉等设备上的应用具有很好的指导意义。     

The role of Biot slow waves in electroseismic wave phenomena

The electromagnetic fields that are generated as a spherical seismic wave (either P or S) traverses an interface separating two porous materials are numerically modeled both with and without the generation of Biot slow waves at the interface. In the case of an incident fast-P wave, the predicted electric-field amplitudes when slow waves are neglected can easily be off by as much as an order of magnitude. In the case of an incident S wave, the error is much smaller (typically on the order of 10% or less) because not much S-wave energy gets converted into slow waves. In neglecting the slow waves, only six plane waves (reflected and transmitted fast-P, S, and EM waves) are available with which to match the eight continuity conditions that hold at each interface. This overdetermined problem is solved by placing weights on the eight continuity conditions so that those conditions that are most important for obtaining the proper response are emphasized. It is demonstrated that when slow waves are neglected, it is best to also neglect the continuity of the Darcy flow and fluid pressure across an interface. The principal conclusion of this work is that to properly model the electromagnetic (EM) fields generated at an interface by an incident seismic wave, the full Biot theory that allows for generation of slow waves must be employed.     

Non-equilibrium thermodynamics of interfaces including electromagnetic effects

The application of non-equilibrium thermodynamics to a system consisting of two bulk phases and their interface is extended to include electromagnetic effects. The interface is assumed to carry singular mass, energy, and entropy densities as well as singular electric charge, electric current, polarization and magnetization. Electric and magnetic fields are allowed to be discontinuous across the interface, but not singular.Maxwell's equations are used to derive relationships among electromagnetic quantities on the surface and boundary conditions for the bulk phases. An expression for the surface entropy production including electromagnetic effects is obtained, and the resulting linear laws relating thermodynamic forces and fluxes are investigated.     

An analysis of the semi-analytic solutions of a viscous fluid with old and new definitions of fractional derivatives

In this paper we present the natural convection flow of an incompressible viscous fluid subject to Newtonian heating and constant mass diffusion using a recently developed definition of the Caputo–Fabrizio fractional derivative. Boundary layer equations in dimensionless form are obtained by means of dimensionless variables. The expressions for the temperature, concentration and velocity fields are obtained in the Laplace transformed domain. The inverse Laplace transform for the temperature, concentration and velocity field are found numerically by means of Stehfest's and Tzou's algorithms. A comparative analysis has been carried between the Caputo–Fabrizio and the Caputo fractional model obtained by Vieru (2015) through graphical illustration. At the end, we can see the impact of the flow parameters, including the new fractional parameter, on the flow which is presented graphically. As a result, the fractional viscous fluid model with the Caputo–Fabrizio fractional derivative has a higher velocity than with the Caputo.