聚氧化乙烯/接枝SiO2复合物电解质研究

通过将聚氧化乙烯（PEO）分别与表面接枝聚丙烯酸锂和表面接枝二乙二醇甲醚的SiO2微粒共混，制备得PEO／接枝SiO2复合物膜，考察了复合物膜的形态和离子电导性。结果表明：接枝改性增强了SiO2微粒与PEO的相容性，降低了PEO的结晶性，显著提高了复合物膜的室温离子电导率。     

原位复合法制备(PEO)8LiClO4/TiO2聚合物电解质的研究

以聚氧化乙烯/高氯酸锂复合物[(PEO)8LiClO4]为基体,通过钛酸丁酯的水解缩合反应在其中原位生成TiO2,制备了(PEO)8LiClO4/TiO2复合聚合物电解质,采用SEM、DSC和交流阻抗方法研究了聚合物电解质的形态、玻璃化转变温度(Tg)、结晶度(Xc)和离子导电性能.结果表明原位生成的TiO2在基体中分散均匀,加入TiO2后聚合物电解质体系的Tg和Xc均有所降低,而电导率明显提高,当TiO2添加量为ω=0.05时电导率达到最大值5.5×10-5S·cm-1(20℃).     

Pd/CexZr1-xO2/SiO2催化剂的制备及其甲烷催化燃烧性能的研究

采用浸渍法制备了Pd质量分数为0.1%~1.0%的Pd/SiO2和Pd/5%CexZr1-xO2/SiO2（x0.0~1.0）系列催化剂，在微型固定床反应器上对催化剂的甲烷催化燃烧性能进行了评价，用XRD、H2-TPR等分析测试技术对催化剂的结构进行了表征。结果表明，Pd/SiO2和Pd/CexZr1-xO2/SiO2催化剂都具有较好的甲烷催化燃烧活性，CexZr1-xO2可以明显提高催化剂的催化活性，并且Ce和Zr的比值对催化剂催化活性也有显著的影响。XRD和TPR显示，Pd/CexZr1-xO2/SiO2催化剂中的CexZr1-xO2对PdO的分散性和还原性有较好的促进作用。     

全氟磺酸树脂/SiO2催化合成邻苯二甲酸二辛酯

全氟磺酸树脂/SiO2催化合成邻苯二甲酸二辛酯;固体酸;全氟磺酸离子交换膜;全氟磺酸树脂/SiO2复合物催化剂;邻苯二甲酸二辛酯     

超临界CO2中以PEG2000为模板制备TiO2/SiO2复合材料

超临界CO2;PEG;模板;TiO2/SiO2;复合材料     

TiO2/SiO2气凝胶对吡啶的光催化降解

TiO2/SiO2气凝胶对吡啶的光催化降解;吡啶     

In-Situ FT-IR Investigation Methane to Syngas over of Partial Oxidation of Rh/SiO2 Catalyst

Partial oxidation of methane to syngas （POM） over Rh/SiO2 catalyst was investigated using in-situ FT-IR. When methane interacted with 1.0wt%Rh/SiO2 catalyst, it was dissociated to adsorbed hydrogen and CHx species. The adsorbed hydrogen atoms were transferred to SiO2 surface by ＂spill-over＂ and reacted with lattice oxygen to form surface -OH species. POM mechanism was investigated over Rh/SiO2 catalyst using in-situ FT-IR. It was found that CO2 was formed before CO could be detected when CH4 and O2 were introduced over the preoxidized Rh/SiO2 catalyst, whereas CO was detected before CO2 was formed over the prereduced Rh/SiO2 catalyst.     

碱性纳米复合聚合物电解质研究

为了提高聚氧化乙烯(PEO)/KOH 基碱性聚合物电解质的电导率, 制电解质膜时分别将纳米 TiO2、纳米β-Al2O3和纳米 SiO2添加到 PEO/KOH 体系中, 制备出了兼顾电学和力学性能的碱性纳米复合聚合物电解质. 交流阻抗测试显示, 其室温(28 ℃)电导率可达到 10-3 S?cm-1数量级. 循环伏安研究表明, 制得的电解质膜在不锈钢惰性电极上的电化学稳定窗口约为 1.6 V. 分别研究了聚合物电解质膜中 KOH, H2O, 无机纳米粉末的含量以及温度对体系电导率的影响.     

LLDPE/纳米SiO2膜的光学性能

LLDPE;农膜;LLDPE/纳米SiO2膜的光学性能     

TiO2/SiO2纳米薄膜的光催化活性和亲水性

通过sol gel工艺在钠钙玻璃表面制备了均匀透明的TiO2/SiO2复合纳米薄膜.实验结 果表明: 当SiO2添加量较高时, TiO2/SiO2复合纳米薄膜的光催化活性明显降低;当SiO2添加 量较低时,TiO2/SiO2复合薄膜的光催化活性无明显变化.在TiO2薄膜中添加SiO2,可以抑制薄 膜中TiO2晶粒的长大,同时薄膜表面的羟基含量增加, 水在复合薄膜表面的润湿角下降, 亲 水能力增强.当SiO2含量为10％－20％（摩尔分数）时获得了润湿角为0°的超亲水性薄膜.     

Sc2MgGa2 and Y2MgGa2

Scandium magnesium gallide, Sc₂MgGa₂, and yttrium magnesium gallide, Y₂MgGa₂, were synthesized from the corresponding elements by heating under an argon atmosphere in an induction furnace. These intermetallic compounds crystallize in the tetragonal Mo₂FeB₂‐type structure. All three crystallographically unique atoms occupy special positions and the site symmetries of (Sc/Y, Ga) and Mg are m2m and 4/m, respectively. The coordinations around Sc/Y, Mg and Ga are pentagonal (Sc/Y), tetragonal (Mg) and triangular (Ga) prisms, with four (Mg) or three (Ga) additional capping atoms leading to the coordination numbers [10], [8+4] and [6+3], respectively. The crystal structure of Sc₂MgGa₂ was determined from single‐crystal diffraction intensities and the isostructural Y₂MgGa₂ was identified from powder diffraction data.     

Zur Kenntnis der Dialkalimetalldichalkogenide β-Na2S2, K2S2, α-Rb2S2, β-Rb2S2, K2Se2, Rb2Se2, α-K2Te2, β-K2Te2 und Rb2Te2

On Dialkali Metal Dichalcogenides β-Na₂S₂, K₂S₂, α-Rb₂S₂, β-Rb₂S₂, K₂Se₂, Rb₂Se₂, α-K₂Te₂, β-K₂Te₂ and Rb₂Te₂ The first presentation of pure samples of α- and β-Rb₂S₂, α- and β-K₂Te₂, and Rb₂Te₂ is described. Using single crystals of K₂S₂ and K₂Se₂, received by ammonothermal synthesis, the structure of the Na₂O₂ type and by using single crystals of β-Na₂S₂ and β-K₂Te₂ the Li₂O₂ type structure will be refined. By combined investigations with temperature-dependent Guinier-, neutron diffraction-, thermal analysis, and Raman-spectroscopy the nature of the monotropic phase transition from the Na₂O₂ type to the Li₂O₂ type will be explained by means of the examples α-/β-Na₂S₂ and α-/β-K₂Te₂. A further case of dimorphic condition as well as the monotropic phase transition of α- and β-Rb₂S₂ is presented. The existing areas of the structure fields of the dialkali metal dichalcogenides are limited by the model of the polar covalence.     

Crystal Structures of [Bu2Sn(O2PPh2)2], [Ph2Sn(O2PPh2)2], and [PhClSn(O2PPh2)OMe]2. Raman Spectra of [Ph2Sn(O2PPh2)2] and [PhClSn(O2PPh2)OMe]2

[(n‐Bu)₂Sn(O₂PPh₂)₂] ( 1 ), and [Ph₂Sn(O₂PPh₂)₂] ( 2 ) have been synthesized by the reactions of R₂SnCl₂ (R=n‐Bu, Ph) with HO₂PPh₂ in Methanol. From the reaction of Ph₂SnCl₂ with diphenylphosphinic acid a third product [PhClSn(O₂PPh₂)OMe]₂ ( 3 ) could be isolated. X‐ray diffraction studies show 1 to crystallize in the monoclinic space group P2₁/c with a = 1303.7(1) pm, b = 2286.9(2) pm, c = 1063.1(1) pm, β = 94.383(6)°, and Z = 4. 2 crystallizes triclinic in the space group , the cell parameters being a = 1293.2(2) pm, b = 1478.5(4) pm, c = 1507.2(3) pm, α = 98.86(3)°, β = 109.63(2)°, γ = 114.88(2)°, and Z = 2. Both compounds form arrays of eight‐membered rings (SnOPO)₂ linked at the tin atoms to form chains of infinite length. The dimer 3 consists of a like ring, in which the tin atoms are bridged by methoxo groups. It crystallizes triclinic in space group with a = 946.4(1) pm, b = 963.7(1) pm, c = 1174.2(1) pm, α = 82.495(6)°, β = 66.451(6)°, γ = 74.922(6)°, and Z = 1 for the dimer. The Raman spectra of 2 and 3 are given and discussed.     

Electrochemical study of (NEt4)2Cl2FeS2MoS2 and (NEt4)2Cl2FeS2MoS2FeCl2

Summary The ability of [MoS₄]^2–, anions to be used as ligands for transition metal ions has been widely demonstrated, especially with Fe²⁺. The present study has been restricted to linear complexes such as (NEt₄)₂ [Cl₂FeS₂MoS₂] and (NEt₄)₂[Cl₂FeS₂MoS₂FeCl₂]. Their electrochemical properties are described: upon electrochemical reduction, these compounds yield MoS₂, as a black precipitate, and an iron complex in solution, assumed to be [SFeCl₂]^2–. The electrochemical reduction goes through two electron transfers, coupled with the breakdown of the molecular skeleton: a DISPl and an ECE mechanism. Depending on the solvent, the following equilibrium may be observed: [Cl₄Fe₂MoS₄]^2–[Cl₂FeMoS₄]^2–+FeCl₂. The equilibrium constant, K_D, was evaluated by differential pulse polarography. K_D is tightly related to the donor number of the solvent.     

The alkali hypophosphites KH2PO2, RbH2PO2 and CsH2PO2

The structures of the hypophosphites KH₂PO₂ (potassium hypophosphite), RbH₂PO₂ (rubidium hypophosphite) and CsH₂PO₂ (caesium hypophosphite) have been determined by single‐crystal X‐ray diffraction. The structures consist of layers of alkali cations and hypophosphite anions, with the latter bridging four cations within the same layer. The Rb and Cs hypophosphites are isomorphous.     

Syntheses,Spectroscopic Studies,and Crystal Structures of Me2Sn(O2PPh2)2, Ph2Pb(O2PMe2)2, and Ph2Pb(O2PPh2)2

Me₂Sn(O₂PPh₂)₂ ( 1 ), Ph₂Pb(O₂PMe₂)₂ ( 2 ), and Ph₂Pb(O₂PPh₂)₂ ( 3 ) have been synthesized by the reactions of Me₂SnCl₂ or Ph₃PbCl with the corresponding diorganophosphinic acid in methanol. X‐ray diffraction studies show that the diorganophosphinate groups behave as double bridges between the metal atoms leading to polymeric ring‐chain structures with M₂O₄P₂ (M = Pb, Sn) eight‐membered rings. The organic groups bonded to the metal atoms are in trans‐position in the resulting octahedral arrangement around the metal atoms. The IR and the mass spectra were reported and discussed.     

Thermal decomposition of Me3SnO2PCl2, Me2Sn(O2PCl2)2 and Ph3SnO2PCl2

TG and DTA studies on Me₃SnO₂PCl₂, Me₂Sn(O₂PCl₂)₂ and Ph₃SnO₂PCl₂ were carried out under dynamic argon atmosphere. The results show that the decomposition proceeds in different stages leading to the formation of Sn₃(PO₄)₂ as a stable product. This compound was characterized by IR spectroscopy. Decomposition schemes involving reductive elimination reactions were proposed.