Photoactive rare earth (Eu3+, Tb3+) hybrids with organically modified silica covalently bonded polymeric chain

1,3-Bis(2-formylphenoxy)-2-propanol (BFPP) is grafted to 3-(triethoxysilyl)-propyl isocyanate (TESPIC) to prepare the organic precursor BFPP-Si. Then, the organic precursor BFPP-Si is coordinated with rare earth ion to obtain the luminescent center RE-BFPP-Si. Allylamine monomer (AM) is modified by TESPIC to form the precursor AM-Si which is then polymerized with the benzoyl peroxide as the initiator to form the polymer precursor PAM-Si. The other polymer precursor polyethylene glycol (PEG)-Si is achieved through the grafting reaction between PEG and TESPIC. Subsequently, the hybrid materials RE-BFPP-Si-PAM or RE-BFPP-Si-PEG are assembled in which RE-BFPP-Si and PAM-Si or PEG-Si connected with Si-O bonds through sol-gel process and characterized with scanning electronic microscopy, X-ray diffraction, and TG-DSC curves. Their photophysical properties are especially studied in details, indicating that the introduction of organic polymer chain is favorable for the luminescence lifetime and quantum efficiency.     

Lanthanide (Eu3+, Tb3+) centered hybrid materials using modified functional bridge chemical bonded with silica: molecular design, physical characterization, and photophysical properties

1,3-Bis(2-formylphenoxy)-2-propanol (BFPP) was first synthesized and then grafted to 3-(triethoxysilyl)propyl isocyanate (TESPIC) to achieve a molecular precursor BFPP-Si through the hydrogen-transfer nucleophilic addition reaction between the hydroxyl group of BFPP and the isocyanate group of TESPIC. Then, a chemically bonded lanthanide/inorganic/organic hybrid material (BFPP-Si-Ln) was constructed using BFPP-Si as a bridge molecule that can both coordinate to lanthanide ions (Eu3+ or Tb3+) and form an inorganic Si-O network with tetraethoxysilane (TEOS) after cohydrolysis and copolycondensation processes. Furthermore, two types of ternary rare-earth/inorganic/organic hybrids (BFPP-Si-Dipy-Ln and BFPP-Si-Phen-Ln) were assembled by the introduction of the second ligands (4,4'-bipyridyl and 1,10-phenanthroline) into the above system. All of these hybrid materials exhibit homogeneous microstructures and morphologies, suggesting the occurrence of self-assembly of the inorganic network and organic chain. Measurements of the photoluminescent properties of these materials show that the ternary rare-earth/inorganic/organic hybrids present stronger luminescent intensities, longer lifetimes, and higher luminescent quantum efficiencies than the binary hybrids, indicating that the introduction of the second ligands can sensitize the luminescence emission of the lanthanide ions in the ternary hybrid systems.     

Two series of multicomponent rare earth (Eu3+, Tb3+, Sm3+) polymeric hybrids: chemically bonded assembly and photophysical properties

In the present work, two new chemical linkages (BPDA-PAM, BPDA-DG) are synthesized through the reaction between 4,4'-biphthalic anhydride (BPDA) and acrylamide (AM), diethylene glycol (DG), respectively. Then two novel series of multicomponent rare earth (Eu(3+), Tb(3+), Sm(3+)) polymeric hybrids have been assembled through the coordination bonding: one is from the linkage BPDA-PAM to form the hybrids BPDA-PAM-RE-phen(bipy) (2,2'-bipyridine (bipy) and 1,10-penanthroline (phen)), the other is from the linkage BPDA-DG to compose the hybrids BPDA-DG-RE-PVP and PVP (PVP = poly vinylpyridine). These hybrids are characterized and especially the photophysical properties (luminescence spectra, lifetimes and quantum efficiencies) are discussed in detail.     

Optically hybrid lanthanide ions (Eu3+, Tb3+)‐centered materials with novel functional di‐urea linkages

The synthesis of 3‐(triethoxysilyl)‐propyl isocyanate (TEPIC) modified by (3‐aminopropyl)triethoxysilane (APS) and the preparation of the corresponding organic–inorganic molecular‐based hybrid material with the two components equipped with covalent bonds is described. The coupling agent moiety is a convolution of TEPIC and APS through ? NHC(?O)NH? groups, which is applied to coordinate to RE³⁺ and further formed Si? O backbones after hydrolysis and polycondensation processes. For comparison and luminescence efficiency purposes, we added 2,2‐bipyridyl to the above hybrids in order to increase the conjugating effects and sensitize rare earth ions emissions. Luminescence spectra were utilized to characterize the photophysical properties of the hybrid material obtained, and the above spectroscopic data reveal that the triplet energy of 2,2‐dipyridyl in this favorable hybrid system matches with the emissive energy level of RE³⁺. In this way, the intramolecular energy transfer process took place within these molecular‐based hybrids and strong green and red emissions of RE³⁺ have been achieved. Copyright © 2005 John Wiley & Sons, Ltd.     

Novel photofunctional multicomponent rare earth (Eu3+, Tb3+, Sm3+ and Dy3+) hybrids with double cross-linking siloxane covalently bonding SiO2/ZnS nanocomposite

Zinc sulfide (ZnS) quantum dot is modified with 3-mercaptopropyltrimethoxysilane (MPTMS) to obtain MPTMS functionalized SiO(2)/ZnS nanocomposite. Novel rare earth/inorganic/organic hybrid materials are prepared by using 3-(triethoxysilyl)-propyl isocyanate (TESPIC) as an organic bridge molecule that can both coordinate to rare earth ions (Eu(3+), Tb(3+), Sm(3+) and Dy(3+)) and form an inorganic Si-O-Si network with SiO(2) ZnS nanocomposite after cohydrolysis and copolycondensation through a sol-gel process. These multicomponent hybrids with double cross-linking siloxane (TESPIC-MPTMS) covalently bonding SiO(2)/ZnS and assistant ligands (Phen = 1,10-phenanthroline, Bipy = 2,2'-bipyridyl) are characterized and especially the photoluminescence properties of them are studied in detail. The luminescent spectra of the hybrids show the dominant excitation of TESPIC-MPTMS-SiO(2)/ZnS unit and the unique emission of rare earth ions, suggesting that TESPIC-MPTMS-SiO(2)/ZnS unit behaves as the main energy donor and effective energy transfer take place between it and rare earth ions. Besides, the luminescent performance of Bipy-RE-TESPIC-MPTM-SiO(2)/ZnS hybrids are superior to that of Phen-RE-TESPIC-MPTMS-SiO(2)/ZnS ones (RE=Eu, Tb, Sm, Dy), which reveals that Bipy or Phen only act as structural ligand within the hybrid systems.     

The Photophysical Properties of Quaternary Lanthanide (Eu3+, Tb3+, Sm3+, Dy3+) Functional Molecular Complexes

Summary. In this paper, according to the molecular fragment principle, a series of twelve quaternary luminescent lanthanide complex molecular systems were assembled. Both elemental analysis and infrared spectroscopy allowed to determine the complexes formula: Ln(Nic)₃(L)·H₂O, where Ln=Sm, Eu, Tb, Dy; HNic=pyridine-3-carboxylic acid; L=N,N-dimethylformamide (DMF), N,N-dimethylacetamide (DMA), pyrrolidone (pyro). The photophysical properties of these functional molecular systems were studied by recording both ultraviolet-visible absorption, phosphorescence, fluorescence excitation, and emission spectra. It was found that the conjugated pyridine-3-carboxylic acid acts as the main energy donor and luminescence sensitizer due to the suitable energy match and effective energy transfer to the luminescent Ln ³⁺ ions. Amide molecules (DMF, DMA, pyro) were only used as assistant structural ligands to enhance the luminescence. Especially the europium complexes show the strongest luminescence due to the optimum energy transfer between the HNic triplet state energy level and Eu³⁺.     

Solvothermal synthesis and characterization of Ln (Eu3+, Tb3+) doped hydroxyapatite

Luminescent Ln (Eu3+, Tb3+) doped hydroxyapatite (Eu:HAp, Tb:HAp) phosphors were successfully fabricated via the cetyltrimethylammonium bromide (CTAB)/n-octane/n-butanol/water microemulsion-mediated solvothermal process. The structure, morphology, and optical properties were systematically characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectra (XPS), Fourier transform infrared spectroscopy (FT-IR), and photoluminescence (PL) spectra as well as the kinetic decays, respectively. The XRD results reveal that the obtained Eu:HAp and Tb:HAp show the characteristic peaks of hydroxyapatite in a hexagonal lattice structure. It is observed that the as-prepared luminescent samples exhibit rod-like morphology with well dispersed and non-aggregated size distribution. Upon excitation by UV radiation, the phosphors demonstrate the characteristic 5D 0-7F 1-4 emission lines of Eu3+ and the characteristic 5D4-7F 3-6 emission lines of Tb3+. Moreover, the photoluminescence intensities (PL) of Eu3+ and Tb3+ can be tuned by altering the solvothermal temperature and the doping concentration of Eu3+ and Tb3+.     

Photoluminescence properties of rare earths (Eu3+, Tb3+, Dy3+ and Tm3+) activated NaInW2O8 wolframite host lattice

The photoluminescence (PL) studies on NaIn_1?xRE_xW₂O₈, with RE=Eu³⁺, Tb³⁺, Dy³⁺ and Tm³⁺ phases have shown that the relative contribution of the host lattice and of the intra-f–f emission of the activators to the PL varies with the nature of the rare earth cation. In the case of Dy³⁺ and Tm³⁺ activators, with yellow and blue emission, respectively, the energy transfer from host to the activator plays a major role. In contrast for Eu³⁺, with intense red emission, the host absorption is less pronounced and the intra-f–f transitions of the Eu³⁺ ions play a major role, whereas for Tb³⁺ intra-f–f transitions are only observed, giving rise to green emission.     

Photoluminescent Eu3+/Tb3+ hybrids from the copolymerization of organically modified silane

A novel series of organic/inorganic/polymeric hybrid materials have been constructed from covalently bonding rare earth complexes into the inorganic matrix and polymer backbone. Among functional linkage, 3-chloropropyltrimethoxysilane is used to modify the hydroxyl group of p-hydroxycinnamic acid via substitution reaction to form the precursor, and the precursor is subsequently used to covalently bonding to acrylic acid, methyl acrylate, and vinyltriethoxysilane, respectively, through copolymerization reaction to form the organic/inorganic/polymeric network. In addition, we introduce the monomer 1,10-phenanthroline as the second reagent ligand for constructing the ternary luminescent hybrid material systems (abbreviated as HC-PMA-RE, HC?=?p-hydroxycinnamic acid and 3-chloropropyltrimethoxysilane). The physical characterization and especially the photoluminescence property of ternary system are studied in detail, which present the regular microstructure and characteristic photoluminescence.     

Luminescent lanthanide (Eu3+, Tb3+) hybrids with 4-vinylbenzeneboronic acid functionalized Si-O bridges and beta-diketones

4-Vinylphenylboronic acid ligand (VPBA) is functionalized with two crosslinking reagents (3-(triethoxysilyl)-propylisocyanate [TEPIC] and 3-(trimethoxysilyl) propyl methacrylate [TMPMA]) to achieve the two special molecular bridge VPBA-TEPIC and VPBA-TMPMA. Meanwhile, beta-diketone ligands (2-thenoyltrifluoroacetone [TTA], acetyl acetone [ACAC]) as the second ligands play the role of the main energy donor, which absorb abundant energy in ultraviolet-visible extent and then transfer the energy to the corresponding lanthanide ions (Eu(3+), Tb(3+)) to sensitize their emission of them. Eight binary and ternary Eu(3+), Tb(3+) hybrids with VPBA-TEPIC (VPBA-TMPMA) and TTA (ACAC) have been constructed, whose photoluminescence properties are studied in depth and suggest that the ternary hybrids show the favorable characteristic luminescent properties (longer lifetime and higher quantum efficiency).     

Coordination bonding construction, characterization and photoluminescence of ternary lanthanide (Eu(3+), Tb(3+)) hybrids with phenylphenacyl-sulfoxide modified bridge and polymer units

A novel polysilsesquioxane bridge (PPSSi) is synthesized with methylene group modification of phenylphenacyl sulfoxide by isocyanate group from 3-(triethoxysilyl)propyl isocyanate (TEPIC). Then ternary lanthanide (Eu, Tb) hybrids of polysilsesquioxane bridge (PPSSi) and four kinds of polymer chain (polyacrylamide (PAM), polyvinylpyrrolidone (PVP), polymethyl methacrylate (PMMA) and polyethyl methacrylate (PEMA) were assembled wth coordination bonding. To explore the influence of the different polymeric chains on the properties of lanthanide hybrids, the microstructure and photoluminescent properties of these lanthanide coordination polymer hybrids (PPSSi-Ln-PAM (PVP, PMMA, PEMA)) are compared in detail. Four organic polymer chains with different structures not only can coordinate to the lanthanide ions by their own carbonyl groups, but also can form a polymeric matrix together with the inorganic Si-O network. The results show that all the obtained hybrids could show efficient intramolecular energy transfer and lead to excellent characteristic emission of lanthanide ions. Moreover, the different structures of the polymers induce different microstructures and different photoluminescent behavior (lifetime and quantum efficiency) for these hybrid systems. The PPSSi-Ln-PMMA hybrid leads to the longest lifetime and highest quantum efficiency.     

Memory devices based on lanthanide (Sm3+, Eu3+, Gd3+) complexes

Memory effects in single-layer organic light-emitting devices based on Sm3+, Gd3+, and Eu3+ rare earth complexes were realized. The device structure was indium-tin-oxide (ITO)/3,4-poly(ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT)/Poly(N-vinyl carbazole) (PVK): rare earth complex/LiF/Ca/Ag. It was found experimentally that all the devices exhibited two distinctive bistable conductivity states in current-voltage characteristics by applying negative starting voltage, and more than 10(6) write-read-erase-reread cycles were achieved without degradation. Our results indicate that the rare earth organic complexes are promising materials for high-density, low-cost memory application besides the potential application as organic light-emitting materials in display devices.     

Photoactive Hybrid Materials of Lanthanide (Eu3+, Tb3+, Sm3+) Beta‐Diketonates and Polymer Resin Through Ionic Liquid Bridge

A special multifunctional ionic liquid compound (1‐methyl‐3‐(2‐(thiocarboxyoxy)‐ethyl)‐2H‐imidazole‐1,3‐diium bromide (SHIL)) is used as the chemical bridge to link lanthanide beta‐diketonates and polymer resin, which are designated as Ln(L)₄‐SHIL‐WR/MR (Ln = Eu, Tb, Sm; L = thenoyltrifluoroacetonate (TTA), acetylacetonate (AA), dibenzoylmethane (DBM); WR = Wang resin, MR = Merrifield resin). Among SHIL and polymer resin are assembled to form covalently bonded system through condensation reaction. Then tetrakis lanthanide beta‐diketonates are linked to SHIL through ion‐exchange reaction. Physical characterization and especially the photoluminescent performance of the multicomponent hybrids are studied. The hybrid materials possess good stability and excellent luminescent property. The results provide useful path to obtain luminescent hybrids for further practical application.     

Highly luminescent Eu(3+) and Tb(3+) macrocyclic complexes bearing an appended phenanthroline chromophore

A two-component ligand system (1) containing 1,4,7,10-tetraazacyclododecane-1,4,7-triacetic acid (DO3A) as the hosting unit for the lanthanide cations and an appended asymmetrically functionalized 1,10-phenanthroline (phen) as the chromophore was synthesized. The 1:1 complexes with Eu(3+), Gd(3+), Tb(3+), and Yb(3+) have been prepared and studied in aqueous solution. For Gd.1, a relaxivity value of 2.4 mM(-1) s(-1) has been measured at 20 MHz and 25 degrees C, which indicates that there are no water molecules in the first coordination sphere of the metal ion. The analysis of high resolution (1)H NMR spectra of Yb.1 supports this view and suggests the direct involvement of the phen moiety in the coordination of the metal ion. For Eu.1 and Tb.1, the absorption and luminescence spectra, the overall luminescence efficiencies, and the metal-centered (MC) lifetimes were obtained; coordination features were also determined by comparing luminescence properties in water and deuterated water. For Eu.1 and Tb.1, the overall emission sensitization (se) process in air-equilibrated water was found to be notably effective with phi(se) = 0.21 and 0.11, respectively. A detailed study of the steps originating from light absorption at the phen unit and leading to MC sensitized emission was performed.     

Synthesis of New LnxBi2–xSe3 (Ln: Sm3+, Eu3+, Gd3+, Tb3+) Nanomaterials and Investigation of Their Optical Properties

New Ln_xBi_2–xSe₃ (Ln: Sm³⁺, Eu³⁺, Gd³⁺, Tb³⁺) based nanomaterials were synthesized by a co‐reduction method. Powder XRD patterns indicate that the Ln_xBi_2–xSe₃ crystals (Ln = Sm³⁺, Eu³⁺, x = 0.00–0.44 and Ln = Gd³⁺, Tb³⁺, x = 0.00–0.50) are isostructural with Bi₂Se₃. The cell parameter c decreases for Ln = Eu³⁺, Gd³⁺, Tb³⁺ upon increasing the dopant content (x), while a slightly increases. Changes in lattice parameters could be related to the radii of cations. SEM images show that doping of the lanthanide ions in the lattice of Bi₂Se₃ generally results in nanoflowers. For the terbium compound two kinds of morphologies (nanoflowers and nanobelts) were observed. UV/Vis absorption and emission spectroscopy reveals mainly electronic transitions of the Ln³⁺ ions. Emission spectra show intense transitions from the excited to the ground state of Ln³⁺ and energy transfer from the Bi₂Se₃ lattice. Emission spectra of europium‐doped materials, in addition to the characteristic red emission peaks of Eu³⁺, show an intense blue emission band centered at 432 nm, originating from the 4f⁶5d¹ to 4f⁷ configuration in Eu²⁺. EPR measurements confirm the existence of Eu²⁺ in the materials. Interestingly, for all samples starting at low Ln³⁺ concentration, the emission intensity rises to a maximum at a Ln³⁺ concentration of x = 0.2 and falls again steadily to a minimum at x = 0.45.     

Interaction of the Fungal Metabolite Harzianic Acid with Rare-Earth Cations (Pr3+, Eu3+, Ho3+, Tm3+)

Rare-earth elements (REEs) are in all respect a class of new contaminants that may have toxic effects on organisms and microorganisms and information on their interactions with natural ligands should be of value to predict and control their diffusion in natural environments. In the current study, we investigate interactions of tripositive cations of praseodymium, europium, holmium, and thulium with harzianic acid (H₂L), a secondary metabolite produced by selected strains of fungi belonging to the Trichoderma genus. We applied the same techniques and workflow previously employed in an analogous study concerning lanthanum, neodymium, samarium, and gadolinium tripositive cations. Therefore, in the current study, HPLC-ESI-HRMS experiments, circular dichroism (CD), and UV-Vis spectrophotometric absorption data, as well as accurate pH measurements, were applied to characterize bonding interactions between harzianic acid and Pr³⁺, Eu³⁺, Ho³⁺, and Tm³⁺ cations. Problems connected to the low solubility of harzianic acid in water were overcome by employing a 0.1 M NaClO₄/(CH₃OH + H₂O 50/50 w/w) mixed solvent. For Pr³⁺, Ho³⁺, and Tm³⁺, only the mono complexes PrL⁺, HoL⁺, and TmL⁺ were detected and their formation constant determined. Eu³⁺ forms almost exclusively the bis complex EuL2− for which the corresponding formation constant is reported; under our experimental conditions, the mono complex EuL⁺ is irrelevant. Combining the results of the present and previous studies, a picture of interactions of harzianic acid with rare-earth cations extending over 8 of the 17 REEs can be composed. In order to complement chemical information with toxicological information, a battery of bioassays was applied to evaluate the effects of praseodymium, europium, holmium, and thulium tripositive cations on a suite of bioindicators including Aliivibrio fischeri (Gram-negative bacterium), Raphidocelis subcapitata (green alga), and Daphnia magna (microcrustacean), and median effective concentration (EC50) values of Pr³⁺, Eu³⁺, Ho³⁺, and Tm³⁺ for the tested species were assessed.     

稀土离子(La3+,Ce3+,Tb3+,Y3+)对炎症及血小板聚集的影响

研究稀土离子(La3 ,Ce3 ,Tb3 ,Y3 )对炎症、血小板聚集及蛋白磷酸化的影响.采用二甲苯使小鼠耳部致炎,腹腔注射稀土离子,观察炎症的变化;利用血小板聚集仪观察稀土离子对血小板聚集的影响;用放射标记法测量稀土对血小板蛋白磷酸化程度的影响.结果表明,稀土离子在2.5×10-4mol·L-1·kg-1的注射剂量下,能显著加强炎症反应;1×10-3mol·L-1的轻稀土(La3 ,Ce3 )对由ADP诱导的血小板聚集有明显的抑制作用,而重稀土(Tb3 ,Y3 )有明显的促进作用;浓度在1×10-6～1×10-4mol·L-1时,轻、重稀土均可促进血小板蛋白磷酸化.稀土离子对炎症、血小板聚集及蛋白磷酸化的影响与稀土的种类和剂量有关.     

Efficient electroluminescence from new lanthanide (Eu3+, Sm3+) complexes

The syntheses, structures, and electroluminescent properties are described for two new lanthanide complexes Ln(HFNH)3phen [HFNH = 4,4,5,5,6,6,6-heptafluoro-1-(2-naphthyl)hexane-1,3-dione; phen = 1,10-phenanthroline; Ln = Eu3+ (1), Sm3+ (2)]. Both complexes exhibit bright photoluminescence at room temperature (RT) due to the characteristic emission of Eu3+ and Sm3+ ion. Several devices using the two complexes as emitters were fabricated. The performances of these devices are among the best reported for devices using europium complex and samarium complex as emitters. The device based on 1 with the structure ITO/TPD (50 nm)/1:CBP (10%, 40 nm)/BCP (20 nm)/AlQ (30 nm)/LiF (1 nm)/Al (200 nm) exhibits the maximum brightness of 957 cd/m2, current efficiency of 4.14 cd/A, and power efficiency of 2.28 lm/W with a pure red Eu3+ ion emission. Especially, at the high brightness of 200 cd/m2, the device of 1 still has a high current efficiency of 2.15 cd/A. The device of 2 with a three-layer structure of ITO/TPD (50 nm)/2 (50 nm)/BCP (20 nm)/LiF (1 nm)/Al (200 nm) gives the maximum brightness of 42 cd/m2, current efficiency of 0.18 cd/A. By the comparison of the electroluminescent properties of devices based on Eu(TTA3phen (TTA = 2-thenoyltrifluoroacteonate) and 1, we conclude that the polyfluoration on the alkyl group of the ligand and the introduction of the long conjugate naphthyl group into the ligand improve the efficiency of 1-doped devices, especially at high current densities.     

Synthesis and fluorescence properties of rare earth (Eu3+ and Gd3+) complexes with alpha-naphthylacetic acid and 1,10-phenanthroline

Rare earth binary complex Eu(NNA)3 (NNA, alpha-naphthylacetic acid), ternary complex Eu(NNA)3.phen (phen, 1,10-phenanthroline) and a series of dinuclear complexes with different mole ratios of Eu3+ to Gd3+ were synthesized. Many advanced approaches, such as element analysis, FTIR spectra, TG and DTA analysis, were used to determine the composition and structure of binary and ternary complex. Moreover, their fluorescence properties were studied by fluorescent spectra and lifetimes. The fluorescence spectra and decay curves of dinuclear complexes indicated that the fluorescence emission intensity was enhanced and the fluorescence lifetime was prolonged by Gd3+. The dinuclear complexes show the best properties when the mole ratio of Eu3+ to Gd3+ is 6:4. A new parameter Y, which was used to evaluate the effect of Gd3+, was introduced. In addition, the relationship of Y value and mole fraction of Gd3+ was analyzed by mathematical software. The results showed that Y value decreased by single exponential mode when the content of Gd3+ decreased.