Free-energy analysis of the electron-density fluctuation in the quantum-mechanical/molecular-mechanical simulation combined with the theory of energy representation

The relationship is investigated for QM/MM (quantum-mechanical/molecular-mechanical) systems between the fluctuations of the electronic state of the QM subsystem and of the solvation effect due to the QM-MM interaction. The free-energy change due to the electron-density fluctuation around its average is highlighted, and is evaluated through an approximate functional formulated in terms of distribution functions of the many-body coupling (pairwise non-additive) part of the QM-MM interaction energy. A set of QM/MM simulations are conducted in MM water solvent for QM water solute in ambient and supercritical conditions and for QM glycine solute in the neutral and zwitterionic forms. The variation of the electronic distortion energy of the QM solute in the course of QM/MM simulation is then shown to be compensated by the corresponding variation of the free energy of solvation. The solvation free energy conditioned by the electronic distortion energy is further analyzed with its components. It is found that the many-body contribution is essentially equal between the free energy and the average sum of solute-solvent interaction energy.     

A novel quantum mechanical/molecular mechanical approach to the free energy calculation for isomerization of glycine in aqueous solution

The free energy change associated with the isomerization reaction of glycine in water solution has been studied by a hybrid quantum mechanical/molecular mechanical (QM/MM) approach combined with the theory of energy representation (QM/MM-ER) recently developed. The solvation free energies for both neutral and zwitterionic form of glycine have been determined by means of the QM/MM-ER simulation. The contributions of the electronic polarization and the fluctuation of the QM solute to the solvation free energy have been investigated. It has been found that the contribution of the density fluctuation of the zwitterionic solute is estimated as -4.2 kcal/mol in the total solvation free energy of -46.1 kcal/mol, while that of the neutral form is computed as -3.0 kcal/mol in the solvation free energy of -15.6 kcal/mol. The resultant free energy change associated with the isomerization of glycine in water has been obtained as -7.8 kcal/mol, in excellent agreement with the experimental data of -7.3 or -7.7 kcal/mol, implying the accuracy of the QM/MM-ER approach. The results have also been compared with those computed by other methodologies such as the polarizable continuum model and the classical molecular simulation. The efficiency and advantage of the QM/MM-ER method has been discussed.     

Calculation of solvation free energy from quantum mechanical charge density and continuum dielectric theory

We have combined ultrasoft pseudopotential density functional theory utilizing plane wave basis with a Poisson-Boltzmann/solvent-accessible surface area (PB/SA) model to calculate the solvation free energy of small neutral organic compounds in water. The solute charge density obtained from density functional theory was directly used in solving the Poisson-Boltzmann equation to obtain the reaction field. The polarized electronic wave function of the solute in the solvent was solved by including the reaction field in the density functional Hamiltonian. The quantum mechanical and Poisson-Boltzmann equations were solved self-consistently until the charge density and reaction field converged. Using the solute charge density directly instead of a point-charge representation permitted asymmetric distortion and spreading out of the electron cloud. Because the electron density could leave the van der Waals surface to penetrate into the high-dielectric solvent, the reaction field generated by this density was generally smaller than that obtained by using the point-charge representation. In applying this model to calculate the solvation free energy of 31 small neutral organic molecules spanning a range of 25 kcal/mol, we obtained a root-mean-square error of only 1.3 kcal/mol if we allowed one adjustable parameter to shift the calculated solvation free energy.     

Novel quantum mechanical/molecular mechanical method combined with the theory of energy representation: free energy calculation for the Beckmann rearrangement promoted by proton transfers in the supercritical water

The Beckmann rearrangement of acetone oxime promoted by proton transfers in the supercritical water has been investigated by means of the hybrid quantum mechanical/molecular mechanical approach combined with the theory of energy representation (QM/MM-ER) recently developed. The transition state (TS) structures have been explored by ab initio calculations for the reaction of hydrated acetone oxime on the assumption that the reaction is catalyzed by proton transfers along the hydrogen bonds connecting the solute and the solvent water molecules. Up to two water molecules have been considered as reactants that take part in the proton transfers. As a result of the density functional theory calculations with B3LYP functional and aug-cc-pVDZ basis set, it has been found that participation of two water molecules in the reaction reduces the activation free energy by -12.3 kcal/mol. Furthermore, the QM/MM-ER simulations have revealed that the TS is more stabilized than the reactant state in the supercritical water by 2.7 kcal/mol when two water molecules are involved in the reaction. Solvation free energies of the reactant and the TS have been decomposed into terms due to the electronic polarization of the solute, electron density fluctuation, and others to elucidate the origin of the stabilization of the TS as compared with the reactant. It has been revealed that the promotion of the chemical reaction due to the hydration mainly originates from the interaction between the nonpolarized solute and the solvent water molecules at the supercritical state.     

An application of the novel quantum mechanical/molecular mechanical method combined with the theory of energy representation: An ionic dissociation of a water molecule in the supercritical water

A novel quantum chemical approach recently developed has been applied to an ionic dissociation of a water molecule (2H(2)O-->H(3)O(+)+OH(-)) in ambient and supercritical water. The method is based on the quantum mechanical/molecular mechanical (QM/MM) simulations combined with the theory of energy representation (QM/MM-ER), where the energy distribution function of MM solvent molecules around a QM solute serves as a fundamental variable to determine the hydration free energy of the solute according to the rigorous framework of the theory of energy representation. The density dependence of the dissociation free energy in the supercritical water has been investigated for the density range from 0.1 to 0.6 g/cm(3) with the temperature fixed at a constant. It has been found that the product ionic species significantly stabilizes in the high density region as compared with the low density. Consequently, the dissociation free energy decreases monotonically as the density increases. The decomposition of the hydration free energy has revealed that the entropic term (-TDeltaS) strongly depends on the density of the solution and dominates the behavior of the dissociation free energy with respect to the variation of the density. The increase in the entropic term in the low density region can be attributed to the decrease in the translational degrees of freedom brought about by the aggregation of solvent water molecules around the ionic solute.     

A microscopic view of substitution reactions solvated by ionic liquids

The solvation effect of the ionic liquid 1-N-butyl-3-methylimidazolium hexafluorophosphate on nucleophilic substitution reactions of halides toward the aliphatic carbon of methyl p-nitrobenzenesulfonate (pNBS) was investigated by computer simulations. The calculations were performed by using a hybrid quantum-mechanical/molecular-mechanical (QM/MM) methodology. A semiempirical Hamiltonian was first parametrized on the basis of comparison with ab initio calculations for Cl(-) and Br(-) reaction with pNBS at gas phase. In condensed phase, free energy profiles were obtained for both reactions. The calculated reaction barriers are in agreement with experiment. The structure of species solvated by the ionic liquid was followed along the reaction progress from the reagents, through the transition state, to the final products. The simulations indicate that this substitution reaction in the ionic liquid is slower than in nonpolar molecular solvents proper to significant stabilization of the halide anion by the ionic liquid in comparison with the transition state with delocalized charge. Solute-solvent interactions in the first solvation shell contain several hydrogen bonds that are formed or broken in response to charge density variation along the reaction coordinate. The detailed structural analysis can be used to rationalize the design of new ionic liquids with tailored solvation properties.     

Computation of the reduction free energy of coenzyme in aqueous solution by the QM/MM-ER method

In a recent development we proposed a quantum chemical approach to compute free energy change for chemical reactions in condensed phases by combining the QM/MM method with the theory of energy representation (QM/MM-ER). We extend in this Letter the novel approach to compute reduction free energy of isoalloxazine ring of FAD (flavin adenine dinucleotide) immersed in water within the framework of the QM/MM-ER method. The characteristic feature of our approach is that the excess electron to be attached on the FAD is identified as a solute. The reduction free energy has been obtained as −80.1 kcal/mol in the aqueous solution.     

Ab initio quantum mechanics-based free energy perturbation method for calculating relative solvation free energies

A free energy perturbation (FEP) method was developed that uses ab initio quantum mechanics (QM) for treating the solute molecules and molecular mechanics (MM) for treating the surroundings. Like our earlier results using AM1 semi empirical QMs, the ab initio QM/MM-based FEP method was shown to accurately calculate relative solvation free energies for a diverse set of small molecules that differ significantly in structure, aromaticity, hydrogen bonding potential, and electron density. Accuracy was similar to or better than conventional FEP methods. The QM/MM-based methods eliminate the need for time-consuming development of MM force field parameters, which are frequently required for drug-like molecules containing structural motifs not adequately described by MM. Future automation of the method and parallelization of the code for Linux 128/256/512 clusters is expected to enhance the speed and increase its use for drug design and lead optimization.     

Partition coefficients of methylated DNA bases obtained from free energy calculations with molecular electron density derived atomic charges

Partition coefficients serve in various areas as pharmacology and environmental sciences to predict the hydrophobicity of different substances. Recently, they have also been used to address the accuracy of force fields for various organic compounds and specifically the methylated DNA bases. In this study, atomic charges were derived by different partitioning methods (Hirshfeld and Minimal Basis Iterative Stockholder) directly from the electron density obtained by electronic structure calculations in a vacuum, with an implicit solvation model or with explicit solvation taking the dynamics of the solute and the solvent into account. To test the ability of these charges to describe electrostatic interactions in force fields for condensed phases, the original atomic charges of the AMBER99 force field were replaced with the new atomic charges and combined with different solvent models to obtain the hydration and chloroform solvation free energies by molecular dynamics simulations. Chloroform–water partition coefficients derived from the obtained free energies were compared to experimental and previously reported values obtained with the GAFF or the AMBER‐99 force field. The results show that good agreement with experimental data is obtained when the polarization of the electron density by the solvent has been taken into account, and when the energy needed to polarize the electron density of the solute has been considered in the transfer free energy. These results were further confirmed by hydration free energies of polar and aromatic amino acid side chain analogs. Comparison of the two partitioning methods, Hirshfeld‐I and Minimal Basis Iterative Stockholder (MBIS), revealed some deficiencies in the Hirshfeld‐I method related to the unstable isolated anionic nitrogen pro‐atom used in the method. Hydration free energies and partitioning coefficients obtained with atomic charges from the MBIS partitioning method accounting for polarization by the implicit solvation model are in good agreement with the experimental values. © 2018 Wiley Periodicals, Inc.     

Solvation Free Energy Calculations: The Combination between the Implicitly Polarized Fixed-charge Model and the Reference Potential Strategy

The IPolQ-Mod charges, which are the average of two charge sets fitted in vacuum state and condensed phase, take account of polarization effect implicitly in the solvation free energy calculation. However, the performance of the IPolQ-Mod charges sensitively depends on the QM levels used to generate the electrostatic potential from which the charges are fitted. In addition, the forces on atoms are not accurate theoretically in the molecular dynamics (MD) simulation as the solvent only feels the electrostatic potential of a half-polarized density of the solute according to the derivation of the IPolQ-Mod charges. To study these issues in detail, the IPolQ-Mod charges are combined with the reference potential (RP) strategy to predict the solvation free energies in the present study. It is found that the thermodynamic perturbation (TP) corrections utilizing total energy difference and interaction energy difference are almost the same and free of bias. The solvation free energies estimated by the RP method match very well with those obtained by applying IPolQ-Mod charges into MD simulation directly. By means of the RP strategy, the performances of the IPolQ-Mod charges with the change of the strength of the exact HF exchange in several DFT functionals are determined effectively. Although the “optimal” strengths are found in B3LYP and LC-ωPBE, the improvements over the default strength are not too much. In addition to the IPolQ-Mod charges, other charge models like bond charge correction (BCC) charges could also be combined with the RP strategy to study the thermodynamic properties like solvation free energy. © 2019 Wiley Periodicals, Inc.     

Coupled semiempirical quantum mechanics and molecular mechanics (QM/MM) calculations on the aqueous solvation free energies of ionized molecules

The aqueous solvation free energies of ionized molecules were computed using a coupled quantum mechanical and molecular mechanical (QM/MM) model based on the AM1, MNDO, and PM3 semiempirical molecular orbital methods for the solute molecule and the TIP3P molecular mechanics model for liquid water. The present work is an extension of our model for neutral solutes where we assumed that the total free energy is the sum of components derived from the electrostatic/polarization terms in the Hamiltonian plus an empirical “nonpolar” term. The electrostatic/polarization contributions to the solvation free energies were computed using molecular dynamics (MD) simulation and thermodynamic integration techniques, while the nonpolar contributions were taken from the literature. The contribution to the electrostatic/polarization component of the free energy due to nonbonded interactions outside the cutoff radii used in the MD simulations was approximated by a Born solvation term. The experimental free energies were reproduced satisfactorily using variational parameters from the vdW terms as in the original model, in addition to a parameter from the one-electron integral terms. The new one-electron parameter was required to account for the short-range effects of overlapping atomic charge densities. The radial distribution functions obtained from the MD simulations showed the expected H-bonded structures between the ionized solute molecule and solvent molecules. We also obtained satisfactory results by neglecting both the empirical nonpolar term and the electronic polarization of the solute, i.e., by implementing a nonpolarization model. ©1999 John Wiley & Sons, Inc. J Comput Chem 20: 1028–1038, 1999     

Modeling heme proteins using atomistic simulations

Heme proteins are found in all living organisms, and perform a wide variety of tasks ranging from electron transport, to the oxidation of organic compounds, to the sensing and transport of small molecules. In this work we review the application of classical and quantum-mechanical atomistic simulation tools to the investigation of several relevant issues in heme proteins chemistry: (i) conformational analysis, ligand migration, and solvation effects studied using classical molecular dynamics simulations; (ii) electronic structure and spin state energetics of the active sites explored using quantum-mechanics (QM) methods; (iii) the interaction of heme proteins with small ligands studied through hybrid quantum mechanics-molecular mechanics (QM-MM) techniques; (iv) and finally chemical reactivity and catalysis tackled by a combination of quantum and classical tools.     

Calculating distribution coefficients based on multi-scale free energy simulations: an evaluation of MM and QM/MM explicit solvent simulations of water-cyclohexane transfer in the SAMPL5 challenge

One of the central aspects of biomolecular recognition is the hydrophobic effect, which is experimentally evaluated by measuring the distribution coefficients of compounds between polar and apolar phases. We use our predictions of the distribution coefficients between water and cyclohexane from the SAMPL5 challenge to estimate the hydrophobicity of different explicit solvent simulation techniques. Based on molecular dynamics trajectories with the CHARMM General Force Field, we compare pure molecular mechanics (MM) with quantum-mechanical (QM) calculations based on QM/MM schemes that treat the solvent at the MM level. We perform QM/MM with both density functional theory (BLYP) and semi-empirical methods (OM1, OM2, OM3, PM3). The calculations also serve to test the sensitivity of partition coefficients to solute polarizability as well as the interplay of the quantum-mechanical region with the fixed-charge molecular mechanics environment. Our results indicate that QM/MM with both BLYP and OM2 outperforms pure MM. However, this observation is limited to a subset of cases where convergence of the free energy can be achieved.