Complex polarizability as used to analyze dielectric relaxation measurements

The effect of representing dielectric properties in terms of the complex polarizability ^c = – i is examined. Loss curves ( and tan ) are shifted towards higher frequencies, revealing the existence of new relaxations and allowing the clarifications of ones already known. We have calculated the shift ratios (at maximum or tan )/ (at maximum or tan ) from the more conventional empirical equations representing the dielectric behavior. Some examples are given.     

Theory of ring formation in a reversible system: general solutions

The enumeration theory is extended in this work into a more general theory, taking back-reactions into consideration. The solutions may faithfully reproduce real processes from arbitrary starting points to a steady-state. Therefore, the presented theory includes the equilibrium theory by Jacobson-Stockmayer, the numerical solution by Gordon-Temple, and the irreversible theory by the present authors. The solutions are described first in general forms of transition probabilities {P}, and then explicitly with the aid of rate equations; simple proofs are given. The presented theory was applied to an experimental data: the distribution of cyclic species in poly(ethylene terephthalate). We shall show that agreement between theory and experiment is nearly perfect.AB model N ₀ Total number of units - V System volume - C ₀=N ₀/N _A ·V Initial concentration (N _A : Avogadro's number) - L _x AB type chain x-mer; (AB)_x - N _x Number of AB type x-mers - R _x Ring x-mer - N _Rx Number of ring x-mers - E Small molecule eliminated by bond-formation - N _E Number of small molecules eliminated by bond-formation - h _k Number of reacted functional units (f.u.) in statek - _k Number of reacted functional units (f.u.) in chains in statek - _k Total number of units in chains in statek - D=h _k /N ₀ Extent of reaction in statek - D ^*= _k / _k Extent of reaction in chains in statek - k _L Chain-propagation rate constant - k _Rx Cyclization rate constant of chain x-mers - k _B Bond breakage rate constant of chains - k _B,Rx Bond breakage rate constant of cyclic x-mers - <k _Rx > _k Mean cyclization rate constant in statek - g(x)=k _B,Rx /k _B Ring-opening factor of cyclic x-mers - P _Lx,k Probability that a chain x-mer will be formed in statek - {P} Set of transition probabilities per single jump in forward direction or reverse direction (see the text on individual transition probabilities) AB model M _A Total AA monomer unit number - M _B Total BB monomer unit number - M ₀=M _A +M _B Total particle number - _A,i =2M _A –h _i Unreacted A functional unit (f.u.) number in statei - _B,i =2M _B –h _i Unreacted B f.u. number in statei - _Ax Unreacted A f.u. number on x-mers - h _i Number of reacted A (or B) f.u. in statei - _i Number of reacted A (or B) f.u. in chains in statei - _A,i =2M _A –h _i + _i A f.u. number in chains in statei - _B,i =2M _B –h _i + _i B f.u. number in chains in statei - _i =2(M ₀–h _i + _i ) Total f.u. number in chains in statei - D=h _i /M ₀ Extent of reaction in statei - D _A ^* = _i / _A,i Extent of reaction of A f.u. in chains in statei - D _B ^* = _i / _B,i Extent of reaction of B f.u. in chains in statei - D ^*=2 _i / _i Extent of reaction in chains in statei - L _x (AA-BB)_x-1-AA type chain x-mer;x=1,2,3,... - L _x BB-(AA-BB)_x type chain x-mer;x=0,1,2,... - L _x (AA-BB)_x type chain x-mer;x=1,2,3,... - N _x Number of type x-mers - N _x Number of type x-mers - N _x Number of type x-mers     

Structure of casein micelles II. α s1-casein

Following the earlier study of the- and-casein micelle structure, we will now report results from the _s1-casein. Static and dynamic light scattering measurements were performed in a concentration range from 0.5 to 6.0 mg/ml atT=35 °C. A constant apparent molecular weight of 3.4×10⁶ daltons was found over the whole range. The apparent radii of gyration and the diffusion coefficients also show no detectable concentration dependence. The ratio of the two radiiR _g /R _H =2.78+0.21 is characteristic of extended rigid structures.R _g is the radius of gyration andR _H the hydrodynamic radius defined via the Stokes-Einstein relationship from the translational diffusion coefficient. This is in agreement with the analysis of the pronounced angular dependence of the scattered light, which leads to the conclusion that _s1-casein forms very long worm-like micelles. The contour length of one cylinder was found to beL1600 nm and the chains appear to be composed of about 12 Kuhn segments. At higher concentrations, lateral aggregation proportional to the concentration is observed. Beyond the overlap concentrationc ^* the asymptotic scattering curve changes its shape, which is interpreted as the beginning of a reversible gelation.     

Interaction of Na+, K+, Li+ and Ca2+ ions in Tris-HCl buffer substrate with monolayers of phosphatidic acid and homologous phosphatidic acid alkyl esters

The interaction of ions (Na⁺, K⁺, Li⁺, Ca²⁺) with monolayers of phosphatidic acid alkyl esters (alkyl = methyl, ethyl,n-propyl,n-pentyl) were investigated at the air/water interface on Tris-HCl buffer, as well as on the electrolytes containing subphases.Qualitatively it can be stated that there are no considerable interactions between Na⁺ ions in the substrate and the head groups of phosphatidic acid esters in the monolayers. On the whole, the modification of the shape in the /a and v/a isotherms ( ^s = film pressure, v ^s = film potential) of the homologous phosphatidic acid esters as a function of the length of the ester group on the subphase containing NaCl, KCl, and LiCl corresponds to that on Tris-HCl buffer without admixture of electrolytes.On the other hand the strength of interaction between Ca²⁺ ions and the homologous phosphatidic acid esters depends on the length of the ester group. The film-condensing effect of Ca²⁺ ions becomes smaller with increasing length of the ester group.     

Scattering from concentration fluctuations in polymer blends: A monte carlo investigation

The collective scattering function S_coll( ), which describes light (neutron-, x-ray) scattering under wavevector , is obtained from Monte Carlo simulations for a symmetrical polymer mixture. The polymers are modelled by self-avoiding walks ofN _A=N_B=N steps on a simple cubic lattice, where a fraction _V of sites is left vacant, and an attractive energy occurs if two neighboring sites are taken by the same kind of monomer. Spinodal curves are estimated from linear extrapolation of S _coll ^–1 (0) vs./k _B T, whereT is the temperature. Also the single chain structure factor is obtained and the de Gennes random phase approximation (RPA) can thus be tested. Unexpectedly, strong deviations are found if one species is very dilute. The estimation of an effective Flory-Huggins-parameter from scattering data is also discussed.Contributed paper delivered at the Tagung der Deutschen Physikalischen Gesellschaft, Fachausschuß Polymerphysik, Hamburg, March 14–16, 1987.     

Conformational changes in the human serum albumin-indomethacin binding

The effect of a nonsteroidal anti-inflammatory drug, the indomethacin, on the conformation of human serum albumin is investigated by evaluating-helix,-structure and random coil structure contents from optical rotatory dispersion spectra. The observed structural changes may be attributed to the-helix-to--structure conversion, because the content of random coil is not largely changed. The increase in-structure is due to a loss in the degrees of freedom in albumin.     

Dielectric properties of moist CaCO3 filled polyethylene composites

The capacitance and the dielectric loss tangents of CaCO₃ filled polyethylene composites were studied. Composite samples, prepared by polymerizing ethylene on the surfaces of fillers, pre-treated by polymerization catalysts, were compared to normal mechanical mixtures. Dielectric dispersion,, and loss, , proved to be sensitive to heating or vacuum treatment. Investigation of samples under conditions of different relative humidities showed that the dielectric dispersion is due to adsorbed water. Both and increased with decreasing frequency and the ratio of loss and dispersion was nearly constant. Dielectric data measured at different relative humidities could be represented by a single Cole-Cole plot. Samples soaked in water for different periods yielded qualitatively similar but quantitatively different Cole-Cole plots. Composite samples showed higher losses at similar humidities.Possible interpretations in terms of a molecular relaxation model, an interfacial relaxation model, including a charged double layer mechanism, percolation theory and the universal response theory were examined, but none was able to fully explain the observed phenomena.     

Orientation of the diphenylene propane unit in stretched polycarbonate from two-dimensional magic-angle-spinning NMR

Two-dimensional magic-angle-spinning (2D-MAS) NMR has been used to measure the orientation parameter, P₂, of the diphenylene propane unit in bisphenol-A polycarbonate oriented by stretching to various extension ratios,, atT=295K andT= 403 K.P ₂ is proportional to the birefringencen, with a maximum birefringencen ₀= 0.189. There is some evidence that the order parameterP ₂ of the DPP units with respect to the chain axis deviates from unity.n ₀ is therefore expected to be different from the birefringence,n ₀ , of perfectly aligned chains of polycarbonate. The experimental results obtained forP ₂() are compared to those predicted by the aggregate model.     

Eigenvectors of the polyethylene chain with conformational defects calculated semianalytically by Green's function

Eigenvectors of vibrating polyethylene chains with (200) and (110) folds have been calculated by solving the phonon-scattering problem exactly with the method of Green's function. The results are applied to analyze the resonance modes of the (200) fold (ggtgg: 1353, 1356, 1374 cm^–1) and the (110) fold (approximately ggggtg: 820, 1288, 1342, 1348, 1372, 1374 cm^–1) in terms of the characteristic vibrations of smaller subunits of the (200) fold (gg, gtg) and the (110) fold (ggggtg, gggg, gtg) which can be identified spectroscopcally.Dedicated to Prof. Dr. W. Pechhold on the occasion of his 60th birthday     

Prediction of the non-Newtonian viscosity and shear stability of polymer solutions

The structure-property relationships derived here permit the prediction of both the zero-shear viscosity ₀, as well as the shear rate dependent viscosity . Using this molecular modeling it is now possible to predict over the whole concentration range, independently of the molecular weight, polymer concentration and imposed shear rate. However, the widely accepted concept: dilute — concentrated, is insufficient. Moreover it is necessary to take five distinct states of solution into account if the viscous behavior of polymeric liquids is to be described satisfactorily. For non-homogeneous, semi-dilute (moderately concentrated) solutions the slope in the linear region of the flow curve (= must be standardized against the overlap parameterc · []. As with the ₀-M-c-relationship, a-M -c- relationship can now be formulated for the complete range of concentration and molecular weight. Furthermore, it is possible to predict the onset of shear induced degradation of polymeric liquids subjected to a laminar velocity field on the basis of molecular modeling. These theoretically obtained results lead to the previously made ad hoc conclusion (Kulicke, Porter [32]) that, experimentally, it is not possible to detect the second Newtonian region.Roman and Italian symbols a exponent of the Mark-Houwink relationship - b exponent of the third term of the ₀-M -c relationship - c concentration /g · cm^–3 - E number of entanglements per molecule - F(r) connector tension - f function - G _i ^A shear modulus; A indicates that it /Pa has been evaluated by a transient shear flow experiment; i is the shear rate to whichG ^A refers to - G storage modulus /Pa - G _p plateau modulus /Pa - H() relaxation spectrum /Pa - h shift factor (₀/_r) - K _H Huggins constant - K _b third constant of the ₀-M -c relationship - K constant of the Mark-Houwink relationship - M molecular weight /g · mol^–1 - M _e molecular weight between two /g · mol^–1 entanglement couplings - N number of segments per molecule - n slope in the power-law region of the flow curve - p p-th mode of the relaxation time spectrum - R gas constant /8.314 J·K^–1·mol^–1 - r direction vector - T temperature /K Greek symbols ß reduced shear rate - shear rate /s^–1 - shear viscosity /Pa·s - _s solvent viscosity /Pa·s - _sp specific viscosity - ₀ zero-shear viscosity /Pa·s - apparent viscosity at shear rate - reduced viscosity - viscosity of polymeric liquid in /Pa·s the second Newtonian region - [] intrinsic viscosity/cm³·g^–1 - screening length/m - /g·cm ^–3 density - relaxation time/s - ₀ experimentally derived relaxation time/s - angular frequency of oscillation Indices conc concentrated - corr slope corrected - cr critical - deg degradation - e entanglement - exp experimental - mod moderately concentrated/semi-dilute - n number average - p polymer - R Rouse - rep reptation - s solvent - sp specific - theo theoretical - weight average - relaxation time - o experimental or steady state - * critical - ** transition moderately conc. — conc. - + transition dilute — moderately cone. Paper presented at the 2nd bilateral U.S.-West German Polymer Symposium, Yountville, the 7th–11th September 1987.     

Macromolecular conformations at the water-air interface: Interactions between alpha and beta conformations of polypeptides

Bidimensional miscibility between alpha and beta conformations of polypeptides was investigated at the water-air interface in the 15°–30°C temperature range. The polypeptides were poly--methyl-L-glutamate (PGMG), poly--benzyl-L-glutamate (PGBG) and poly--benzyl-L-aspartate (PBBA). The polypeptide conformations, alpha or beta, were checked by IR spectroscopy using the MIR technique.The spreading isotherms for mixed monolayers alpha-PGMG/alpha-PGBG and beta-PGMG/beta-PBBA showed bidimensional miscibility both for alpha-alpha and beta-beta mixtures.For the alpha-alpha system, attractive interactions among the polypeptide alphahelices were found (G_mix<0) and the driving factor appeared to be the entropic one (packing). Compressibility moduli and surface potential measurements showed a fluidification effect of alpha-PGBG on mixed monolayers. In the case of beta-beta mixed monolayers, ideal behaviour was observed and no fluidification effect detected.Scanning electron micrographs made on collapsed monolayers showed hexagonal structures for alpha-alpha mixtures and no well-defined or characterized features for the beta-beta system.     

Viscosity B coefficients of polyethyleneglycols in water

The viscosity B coefficients of polyethylene glycols (M=62–1000) are determined at 25 °C. The B coefficient increases non-linearly with the number of ethyleneoxide (EO) units. The increase of the B coefficient per EO(0.111 dm³/mole) is less than the B value for two methylene groups (0.160 dm³/mole). This is discussed in terms of changes in the configurations of polyethylene glycols with long EO chains.Molecular size is the major factor that contributes to B at shorter chains, but solvation (hydration) becomes dominant as the number of ethyleneoxide groups increases. The hydration parameter,(gH₂O/g ethyleneglycol), shows a linear dependence on B at low mass followed by a non-linear increase at high molecular mass and the viscosity C coefficient accounts for the solute-solute interactions.Symbols absolute viscosity - _d absolute viscosity of dispersion medium - _r relative viscosity - _sp specific viscosity - ¦ _o ¦ intrinsic viscosity at infinite dilution - ¦ _c ¦ intrinsic viscosity as a function of solute concentration - partial specific volume - volume fraction - hydration (weight of H₂O hydrating 1 g of polyethylene glycol) - _c hydration as a function of solute concentration - K shape function - K _c shape function as a function of solute concentration     

Effect of thick fixed-charge layers on electrostatic interaction — a theoretical approach

The electrostatic interaction pressure of charged surface layers is considered qualitatively and quantitatively. In the case of mutual penetration of the surface layers in addition to Maxwell stress and osmotic resp. hydrostatic pressure an isotropic stress on the fixed charges carrying molecules of the surface layers has to be taken into account. The derivation of the pressure-distance equations is given starting from both thermodynamic/electrostatic and hydrostatic/electrostatic principles. A possible biological significance of the additional stress is discussed emphasizing its role in modifying the structure of surface layer molecules.List of symbols e ₀ elementary charge - k Boltzmann constant - n _i concentration of theith ionic species in the bulk solution - P hydrostatic pressure - P hydrostatic pressure in the bulk volume (× ) - P ^h integration constant, independent on ×:P ^h =P(h) - T absolute temperature - Z _i electrovalence of theith ionic species - thickness of the surface layer - , ₀ relative and absolute permittivities - II(×) osmotic pressure at position × - II osmotic pressure in the bulk solution (× ) - osmotic pressure in the symmetry plane of interacting identical surface layers (electric field strength equals zero) - integration constant, independent on ×: - _e ^h electrostatic component of the disjoining pressure _e ^h = _e (h) - (×) mobile charge density profile (cations and anions of the electrolyte) - (×) fixed charge density profile - ^t(x) total charge density profile ( ^t = +) - ¹(x) fixed charge density profile of one of the two surface layers ( ¹(×) 0 for 0×) - (×) electric potential profile     

Dielectric properties of cleaned and monodisperse polystyrene latexes in microwaves

The dielectric behavior (, ) of three well-cleaned monodisperse polystyrene latexes having the same particle size and the same number of chemically-bound surface groups has been studied at a fixed microwave frequency (9.4 GHz), as a function of temperature and surface group (SO ₄ ^– , COO^–, OH).A large dielectric relaxation was observed in the sulfate-stabilized latex, which has the most polar surface end-group. The anomalous behavior in the thermal dependence of the hydroxyl and carboxyl-stabilized latexes (the OH latex being more pronounced than the COO^– latex) may originate from differences in the experimental conditions used for the preparation of such polymer colloids, or due to the presence of ionic species.On the basis of various dielectric models, the apparent volume fractions of the latexes were calculated. The amount of bound water around the latex particle was quantitatively correlated to the polarity of surface end-group (SO ₄ ^– > COO^– > OH). The differences between the calculated and actual values were not only a reflection of the thickness of vicinal water, but could also be indicative of the presence of oligomeric species in the suspension's medium (serum) of the latex. The permittivities of hydrated particle and of bound water were obtained with a non-linear iterative procedure.     

X-ray diffraction studies on homologous thallium soaps below the temperature range of the neat phase 1. Calculation and comparison of the structure parameters of unit cells

The results of X-ray diffraction patterns of homologous thallium soaps TlC _n (n-8, 9, 10, 11, 12, 14, 15, 16, 17, 18, 20 and 22) in dependence on the temperature showed that the structures of the phases below the temperature range of the liquid-crystalline neat phase (so called phase C₁, phase C₂, phase I, phase II) are crystalline-like, not liquid-crystalline.As function of the chain length of the fatty acid group, we found the following phase sequences to be a function of temperature: TlC₈: phase Ineat phase: TlC₉–Tl₁₄: phase C₂phase IIphase Ineat phase; TlC₁₅, TlC₁₆: phase C₁phase IIphase Ineat phase; TlC₁₇–TlC₂₂: phase C₁phase IIneat phase.From the X-ray patterns of the thallium soaps were calculated the lattice parameters and the unit cells of these homologues at various temperatures. The comparison between the lattice parameters of the homologues showed, surprisingly, that these parameters were independent of chain length and temperature. This X-ray data are the basis for the following development of structure models of the phase C₁, phase C₂, phase I, and phase II, including the neat phase (see Part 2).     

Study of the polymer latex coalescence by dielectric measurements at microwave frequency—feasibility of the method

The measurement of the complex dielectric constant ( ^*=–j) in the dipolar absorption domain of the free water molecule (microwave region) permits us to follow quasi-specifically and precisely the water circulation during the coalescence process of a latex. Weight losses and dielectric constants variations have been simultaneously recorded upon latex drying, in a resonant cavity at 5 and 9 GHz and under controlled atmosphere and temperature. Two different latexes were studied (polybutylacrylate (PBuA) and polystyrene (PS)) from which the glass transition temperature effect was investigated. It is found that the harder the polymer particles, the more clearly evidenced the flocculation and packing points are. This method appears to be quite reliable for discriminating the various steps in the film formation process of latexes.     

Polypeptides mixed monolayers: collapse mechanism

The mechanism of the collapse process of monolayers of poly-L-alanine and of its mixtures with poly--methyl-L-glutamate was studied at the water/air interface at temperatures of 15°, 20°, 25°, and 30 °C.From measurements of the collapse surface pressure as a function of molar ratios and from the determination of the collapse kinetics, as well as from ellipsometrical measurements of the thickness of the film, the complete solubility of the components, even in the collapsed phase, was deduced.Furthermore, activation energies and values ofG*,H*, andS* in relationship to the kinetics of this process were deduced; it was shown that this process is constituted of a first phase of nucleation and of a second phase of growth both for the poly-L-alanine alone and for its mixtures with poly--methyl-L-glutamate.     

On the crystal chemistry of three copper(II)-arsenates: Cu3(AsO4)2-III,Na4Cu(AsO4)2, and KCu4(AsO4)3

The three copper(II)-arsenates were synthesized under hydrothermal conditions; their crystal structures were determined by single-crystal X-ray diffraction methods:Cu₃(AsO₄)₂-III:a=5.046(2) Å,b=5.417(2) Å,c=6.354(2) Å, =70.61(2)°, =86.52(2)°, =68.43(2)°,Z=1, space group ,R=0.035 for 1674 reflections with sin / 0.90 Å^–1.Na₄Cu(AsO₄)₂:a=4.882(2) Å,b=5.870(2) Å,c=6.958(3) Å, =98.51(2)°, =90.76(2)°, =105.97(2)°,Z=1, space group ,R=0.028 for 2157 reflections with sin / 0.90 Å^–1.KCu₄(AsO₄)₃:a=12.234(5) Å,b=12.438(5) Å,c=7.307(3) Å, =118.17(2)°,Z=4, space group C2/c,R=0.029 for 1896 reflections with sin / 0.80 Å^–1.Within these three compounds the Cu atoms are square planar [4], tetragonal pyramidal [4+1], and tetragonal bipyramidal [4+2] coordinated by O atoms; an exception is the Cu(2)^[4+1] atom in Cu₃(AsO₄)₂-III: the coordination polyhedron is a representative for the transition from a tetragonal pyramid towards a trigonal bipyramid. In KCu₄(AsO₄)₃ the Cu(1)^[4]O₄ square and the As(1)O₄ tetrahedron share a common O—O edge of 2.428(5) Å, resulting in distortions of both the CuO₄ square and the AsO₄ tetrahedron. The two Na atoms in Na₄Cu(AsO₄)₂ are [6] coordinated, the K atom in KCu₄(AsO₄)₃ is [8] coordinated by O atoms.Die drei Kupfer(II)-Arsenate wurden unter Hydrothermalbedingungen gezüchtet und ihre Kristallstrukturen mittels Einkristall-Röntgenbeugungsmethoden ermittelt:Cu₃(AsO₄)₂-III:a = 5.046(2) Å,b = 5.417(2) Å,c = 6.354(2) Å, = 70.61 (2)°, = 86.52(2)°, = 68.43(2)°,Z = 1, Raumgruppe ,R = 0.035 für 1674 Reflexe mit sin / 0.90 Å^–1.Na₄Cu(AsO₄)₂:a = 4.882(2) Å,b = 5.870(2) Å,c = 6.958(3) Å, = 98.51(2)°, = 90.76(2)°, = 105.97(2)°,Z = 1, Raumgruppe ,R = 0.028 für 2157 Reflexe mit sin / 0.90 Å^–1.KCu₄(AsO₄)₃:a = 12.234(5) Å,b = 12.438(5) Å,c = 7.307(3) Å, = 118.17(2)°,Z = 4, Raumgruppe C2/c,R = 0.029 für 1896 Reflexe mit sin / 0.80 Å^–1.Die Cu-Atome in diesen drei Verbindungen sind durch O-Atome quadratisch planar [4], tetragonal pyramidal [4 + 1] und tetragonal dipyramidal [4 + 2]-koordiniert; eine Ausnahme ist das Cu(2)^{[4 + 1]}-Atom in Cu₃(AsO₄)₂-III: Das Koordinationspolyeder stellt einen Vertreter des Übergangs von einer tetragonalen Pyramide zu einer trigonalen Dipyramide dar. In KCu₄(AsO₄)₃ haben das Cu(1)^[4]O₄-Quadrat und das As(1)O₄-Tetraeder eine gemeinsame O—O-Kante von 2.428(5) Å, was eine Verzerrung der beiden Koordinationsfiguren CuO₄-Quadrat und AsO₄-Tetraeder bedingt. Die zwei Na-Atome in Na₄Cu(AsO₄)₃ sind durch O-Atome [6]-koordiniert, das K-Atom in KCu₄(AsO₄)₃ ist [8]-koordiniert.

---

Zur Kristallchemie dreier Kupfer (II)-Arsenate: Cu₃(AsO₄)₂-III, Na₄Cu(AsO₄)₂ und KCu₄(AsO₄)₃

     

Phase behavior and dynamic properties in mixed systems of anionic and cationic surfactants: lithium perfluorooctanesulfonate/diethanolheptadecafluoro-2-undecanolmethylammonium chloride (DEFUMAC) and lithium dodecyl sulfate/DEFUMAC aqueous mixtures

Two ternary phase diagrams of the cationic perfluorosurfactant diethanolheptadecafluoro-2-undecanolmethylammonium chloride (DEFUMAC) with an anionic perfluorosurfactant lithium perfluorooctanesulfonate (LiFOS) and an anionic hydrocarbon surfactant lithium dodecyl sulfate (LiDS) have been established at 25°C. The total surfactant concentration was less than 20wt%. In a wide mixing region of the LiFOS/DEFUMAC system, a lamellar-type phase,P , was identified by its texture under a polarization microscope and by its x-ray diffraction pattern. Dispersed fragments ofP -phase are present in the dilute solutions in which one surfactant was in excess. The anisotropy of electrical conductivity, flow birefringence, dynamic light scattering, and electric briefringence demonstrate that theP fragments are disk-like with a radius of 0.7 m. The disk-likeP particles are transformed by shear into a spherical aggregate ofL above a critical shear gradient. LiDS/DEFUMAC mixed solution forms dispersed and precipitatedL in the dominant region. Radius and micropolarity of the dispersedL aggregates are decreased as the ratio of LiDS:DEFUMAC approaches 1:1. On the basis of x-ray diffraction measurement the structure of precipitatedL -phase seems to consist of monolayers.     

Lamellar phases in mixtures of low molecular weight alkanols and cetyltrimethylammonium bromide (CTAB)

Partial phase diagrams showing the domains of existence of a transparent, viscous, lamellar-structured (D)-phase that transforms reversibly into fluid single phase solutions at high temperature are presented for the system: cetyltrimethylammonium bromide (CTAB), two low molecular weight alcohols, and water with and without additives. At constant temperature and with a fixed amount of surfactant, the size and location of this phase in the phase diagram depends upon three composition variables: i) the ratio of concentrations of medium chain alcohol to long chain alcohol (R), ii) the ratio of concentrations of medium chain alcohol to surfactant (R), and iii) the concentrations of small amounts (up to 10 % by weight) of additives such as ethylene glycol, propylene glycol, and dimethylformamide, as well as NaBr. Small-angle x-ray scattering measurements of these mixtures reveal a lamellar structure. The observed lamellar repeat distances range from 60 A to 290 Å and depend upon the ratiosR andR and the concentration of the additives. The mechanical and structural properties of theseD-phases can be tuned by adjustingR andR. TheD-phase-to-isotropic transition temperature can be varied from near room temperature to above 80 °C by adjustingR andR.