曲壁蜂窝夹层悬臂板的振动特性研究

蜂窝结构作为一种多孔材料具有轻质、高强度、高刚度的优点, 兼具隔声降噪、隔热等优良性能, 被广泛应用于交通运输、航空航天等领域. 传统直壁蜂窝在受力后容易出现应力集中的问题, 这将导致蜂窝夹层产生裂纹破坏, 缩短夹层板的使用寿命. 针对此问题本文设计了一种以圆弧曲壁蜂窝作为芯层的蜂窝夹层板, 基于单位载荷法推导了蜂窝芯的等效参数, 建立曲壁蜂窝夹层板的动力学模型, 利用Chebyshev-Ritz方法求解悬臂边界下曲壁蜂窝夹层板的固有频率, 并用有限元方法进行对比验证, 发现前5阶固有频率的误差均在5%以内, 每阶固有频率对应的振型一致. 通过3D打印聚乳酸(PLA)制备了曲壁蜂窝夹层板, 使用万能试验机对PLA拉伸试件进行准静态拉伸测定了打印材料的杨氏模量, 搭建振动试验平台对制备的曲壁蜂窝夹层板进行正弦扫频试验、定频谐波驻留试验和冲击试验. 对比发现3D打印模型振动试验获得的前5阶固有频率与理论模型和有限元模型的计算结果三者一致, 试验发现曲壁蜂窝芯在特定频段内具有一定的抗冲击性能. 研究结果将为曲壁蜂窝在振动和隔振方面的应用提供理论支持.      

四边简支正交各向异性蜂窝型夹层板固有频率计算

该文以四边简支的方形蜂窝矩形夹层板为例,在经典夹层板理论的基础上,运用离散结构形式的运动控制方程和线性微分算子的可交换性,给出了一种把具有蜂窝型夹心的夹层板的包含三个广义位移的控制方程组化为,仅包含一个广义位移函数的单一方程的简单方法,并给出了四边简支蜂窝型夹层板的固有频率的精确解。研究结果对蜂窝夹层板的结构设计和工程应用具有指导意义。     

考虑芯层离散特性的方形蜂窝夹层板自由振动分析

针对方形蜂窝夹层板,考虑其离散的芯层结构形式,在经典夹层板理论的基础上,运用Hamilton变分原理导出了其离散结构形式的运动控制方程.该文以四边简支的方形蜂窝矩形夹层板为例,采用傅立叶级数和伽辽金法求解出夹层板固有频率的半解析解,并与有限元仿真结果进行了比较,两者吻合良好.该文还将夹层板与等质量的实体板固有频率进行了比较,讨论了夹层板芯层薄壁间距、厚度、高度以及面板厚度对其固有频率的影响.计算结果表明,夹层板相对实体板具有很大的刚度;芯层薄壁高度相对其它参数对夹层板固有频率的影响更大.     

基于板理论的层级褶皱结构失效模式分析

本文基于弹性板理论和夹层板理论对二级层级褶皱结构失效模式进行了分析。通过对基本构件进行受力分析得到了载荷与结构变形之间的关系。根据6种失效模式的定义,从极限载荷或极限应力角度出发,分析了在压缩载荷和剪切载荷工况下的各种失效模式,给出了结构单胞对应的等效正应力和等效切应力表达式。由最小失效强度得到了各失效模式之间的占优关系,并构建了失效机理图来阐释这一机制。最后通过与有限元分析结果比较,分析了本文公式的精度,与数值解吻合较好。     

蜂窝层芯夹层板结构振动与传声特性研究

蜂窝层芯夹层板应用于飞行器、高速列车等交通工具的主体及底板结构时需要考虑其振动及隔声特性. 针对声压激励下的四边简支蜂窝层芯夹层板结构,应用基于Reissner夹层板理论的结构振动方程建立了的声振耦合理论模型(声压以简支模态双级数的形式引入振动控制方程),结合流固耦合条件求解了声振耦合系统控制方程,应用有限元模拟对理论预测进行了验证. 基于理论模型的数值计算结果,系统研究了蜂窝层芯夹层板结构的振动特性和传声特性,刻画了层芯厚度、蜂窝壁厚、夹层板面内尺寸和声压入射角度等关键系统参数对夹层板振动和传声特性的影响,为此类结构的工程优化设计提供了必要的理论参考.     

蜂窝夹层板撞击极限方程预测能力的提升

蜂窝夹层板撞击极限方程是空间碎片撞击航天器风险评估的关键技术,目前描述其预测能力的指标主要有总体、安全预测正确率和绝对、相对误差。基于131个蜂窝夹层板的实验数据,分别描述各个预测指标在方程系数空间的变化特征,并采用层次化思路进行方程预测指标提升的探讨。结果发现,进行方程优化时,预测概率型指标可精确优化,而预测误差型指标可快速优化;总体预测正确率作为首要预测指标可优先用于研究航天器的在轨防护特性,而安全预测正确率作为首要指标则可优先用于其设计安全性。

     

基于双曲面蜂窝夹层结构等效模型的研究及数值分析

蜂窝夹层结构在轻量化设计领域一直备受关注,相关的理论研究也日趋完善.然而,很多研究主要集中在平面蜂窝夹层结构上,而对于曲面结构的相关研究甚少.本文对双曲面蜂窝夹芯进行了力学分析,建立了曲面蜂窝夹层板的等效力学模型,同时建立了双曲面蜂窝夹层板详细模型和基于三明治夹层板理论以及曲面夹层板理论的等效模型,最后通过有限元方法对...     

类桁架夹层板的等效弹性常数研究

从应变能等效出发,将具有周期性分布的夹层板的类桁架夹芯与各向异性连续材料等效,给出了相应的宏观等效弹性常数,进而用有限元方法计算了实际夹层板和等效夹层板的结构响应,用一个算例证明了该文方法的有效性.通过对类桁架夹芯的等效弹性常数的计算,结果表明该文方法可以得到较为准确的等效弹性常数,且较其它类型的均匀化方法大大降低了计算量.     

纳米板振动特性的两类尺度效应研究1)

利用非局部应变梯度理论研究了纳米板横向自由振动特性。通过迭代法获得非局部应力的渐近表达式,利用哈密顿变分原理推导了纳米板的振动控制方程。针对四边简支边界条件,运用双重三角级数法给出了板固有频率的表达式,然后研究了非局部参数、材料特征参数、几何尺寸对纳米板自振频率的影响。数值结果表明：非局部效应会弱化纳米板的等效刚度,因而使板的固有频率降低,应变梯度效应则与之相反,两类效应仅在纳米尺度下对自振频率有显著影响;板几何尺寸的改变也会对其振动频率产生重要影响。     

Influence of skin/core debonding on free vibration behavior of foam and honeycomb cored sandwich plates

The dynamic behavior of partially delaminated at the skin/core interface sandwich plates with flexible cores is studied. The commercial finite element code ABAQUS is used to calculate natural frequencies and mode shapes of the sandwich plates containing a debonding zone. The influence of the debonding size, debonding location and types of debonding on the modal parameters of damaged sandwich plates with various boundary conditions is investigated. The results of dynamic analysis illustrated that they can be useful for analyzing practical problems related to the non-destructive damage detection of partially debonded sandwich plates.     

蜂窝夹层板结构等效模型比较分析

在对蜂窝夹层板结构进行有限元分析时,要对其进行等效处理,采取等效方法的合理性将直接影响到计算结果的准确性.分别采用Reissner理论、Hoff理论、三明治夹芯板理论三种不同的等效方法建立有限元模型,然后进行了静力分析和模态分析,并将每种等效方法的计算结果与实体单元建立的蜂窝夹层板模型计算结果进行了比较.与Reissn...     

Large amplitude vibration of circular sandwich plates

In this paper, fundamental equations of the axisymmetric large amplitude free vibration for circular sandwich plates are derived by means of Hamilton principle. In most cases, the sandwich plates are composed of very thin faces, then the preceding fundamental equations are simplified considerably. For an illustrative example, a circular sandwich plate with edge clamped but free to slip is considered, and then we got a pure analytic solution of the axisymmetric large amplitude free vibration with the aid of the modified iteration method, and derived an analytic relation for the amplitude-frequency response.     

Flexoelectric vibration analysis of nanocomposite sandwich plates

Abstract

In the present study, free vibration of sandwich flexoelectric plates resting on Pasternak foundation is investigated. The top and bottom layers are under applied voltage based on flexoelectricity considerations and core is a nanocomposite plate where reinforced by carbon nanotubes. Based on first-order shear deformation theory, flexoelectricity considerations and Hamilton’s principle, the governing equations are derived for the first time. Navier’s method is used to solve the governing equations analytically in the case of simply supported sandwich plate. Finally, the effects of different parameters are discussed in details. It is found when thickness of flexoelectric face sheets increase, the frequency of nano-sandwich plate decrease. The results of this study can be useful in design and manufacturing of flexoelectric systems as sensor and actuator.     

梯度蜂窝夹芯板在爆炸荷载作用下的动力响应

利用弹道冲击摆锤系统对分层梯度蜂窝夹芯板在爆炸荷载下的动力响应进行了实验研究,分析了梯度蜂窝夹芯板在爆炸荷载作用下的变形失效模式,并与传统非梯度蜂窝夹芯板的抗爆性能做了对比。通过一维应力波理论,分析了应力波在梯度芯层中的传播规律。应力波透射系数在梯度试件中比非梯度芯层中小,而且相对密度递减的芯层组合有最小的应力波透射系数。综合考虑结构变形失效模式,后面板挠度,芯层压缩量以及应力波传播特点得到:分层梯度蜂窝夹芯板的抗爆性能明显优于传统的非梯度夹芯板,在所研究的荷载范围内,芯层相对密度从大到小排列试件的抗爆性能相对较好。     

FURTHER STUDY ON LARGE AMPLITUDE VIBRATION OF CIRCULAR SANDWICH PLATES

ＦＵＲＴＨＥＲＳＴＵＤＹＯＮＬＡＲＧＥＡＭＰＬＩＴＵＤＥＶＩＢＲＡＴＩＯＮＯＦＣＩＲＣＵＬＡＲＳＡＮＤＷＩＣＨＰＬＡＴＥＳＤｕＧｕｏｊｕｎ（杜国君）ＣｈｅｎＹｉｎｇｊｉｅ（陈英杰）Ａｂｓｔｒａｃｔ：Ｉｎｔｈｉｓｐａｐｅｒ，ａｓｏｌｕｔｉｏｎｏｆａｘｉ...     

NONLINEAR VIBRATION OF CIRCULAR SANDWICH PLATES UNDER CIRCUMJACENT LOAD

Based on von Karman plate theory, the issue about nonlinear vibration for circular sandwich plates under circumjacent load with the loosely clamped boundary condition was researched. Nonlinear differential eigenvalue equations and boundary conditions of the problem were formulated by variational method and then their exact static solution can be got. The solution was derived by modified iteration method, so the analytic relations between amplitude and nonlinear oscillating frequency for circular sandwich plates were obtained. When circumjacent load makes the lowest natural frequency zero, critical load is obtained.     

爆炸载荷作用下铝蜂窝夹芯板的动力响应

为了考察铝蜂窝夹芯板在爆炸载荷下的动态响应,采用自行设计的冲击摆系统,用激光位移传感器测定了爆炸载荷作用在铝蜂窝夹芯板上的冲量,对夹芯板的变形和失效模式进行了归类和分析,并就芯层的几何尺寸、炸药当量及板厚对其响应的影响进行了系统研究。给出的理论分析结果与实验结果吻合较好。     

Nonlinear vibration of viscoelastic sandwich plates under narrow-band random excitations

The effect of the narrow-band random excitation on the non-linear response of sandwich plates with an incompressible viscoelastic core is investigated. To model the core, both the transverse shear strains and rotations are assumed to be moderate and the displacement field in the thickness direction is assumed to be linear for the in-plane components and quadratic for the out-of-plane components. In connection to the moderate shear strains considered for the core, a non-linear single-integral viscoelastic model is also used for constitutive modeling of the core. The fifth-order perturbation method is used together with the Galerkin method to transform the nine partial differential equations to a single ordinary integro-differential equation. Converting the lower-order viscoelastic integral term to the differential form, the fifth-order method of multiple scale is applied together with the method of reconstitution to obtain the stochastic phase-amplitude equations. The Fokker–Planck–Kolmogorov equation corresponding to these equations is then solved by the finite difference method, to determine the probability density of the response. The variation of root mean square and marginal probability density of the response amplitude with excitation deterministic frequency and magnitudes are investigated and the bimodal distribution is recognized in narrow ranges of excitation frequency and magnitude.