壁面马赫数分布规律可控的新型内收缩基准流场设计方法

根据有旋特征线理论,设计出了沿程马赫数下降规律可控的轴对称基准流场,分析了基准流场的几何参数(前缘压缩角及中心体半径)的影响规律,发现选取较小的前缘压缩角和中心体半径有利于得到性能优良的基准流场;然后在设计状态Ma=6时研究了三种典型的马赫数下降规律对这种轴对称流场性能的影响。最后考虑了粘性的影响,并进行了粘性修正探索,结果表明,采用附面层位移厚度修正方法后,基准流场的壁面压力分布和无粘情况吻合良好。      

Convective heat and mass transfer in three-dimensional mixed convection flow of viscoelastic fluid in presence of chemical reaction and heat source/sink

Heat and mass transfer effects in the three-dimensional mixed convection flow of a viscoelastic fluid with internal heat source/sink and chemical reaction have been investigated in the present work. The flow generation is because of an exponentially stretching surface. Magnetic field normal to the direction of flow is considered. Convective conditions at the surface are also encountered. Appropriate similarity transformations are utilized to reduce the boundary layer partial differential equations into the ordinary differential equations. The homotopy analysis method is used to develop the solution expressions. Impacts of different controlling parameters such as ratio parameter, Hartman number, internal heat source/sink, chemical reaction, mixed convection, concentration buoyancy parameter and Biot numbers on the velocity, temperature and concentration profiles are analyzed. The local Nusselt and Sherwood numbers are sketched and examined.     

Effect of Hall currents and chemical reaction on hydromagnetic flow of a stretching vertical surface with internal heat generation/absorption

The problem of steady, laminar, hydromagnetic, simultaneous heat and mass transfer by laminar flow of a Newtonian, viscous, electrically conducting and heat generating/absorbing fluid over a continuously stretching surface in the presence of the combined effect of Hall currents and mass diffusion of chemical species with first and higher order reactions is investigated. The fluid is permeated by a strong transverse magnetic field imposed perpendicularly to the plate on the assumption of a small magnetic Reynolds number. Certain transformations are employed to transform the governing differential equations to a local similarity form which are solved numerically. Comparisons with previously published work have been conducted and the results are found to be in good agreement. A parametric study is performed to illustrate the influence of the magnetic field parameter, Hall parameter, the coefficients of space-dependent and temperature-dependent internal heat generation/absorption, the chemical reaction parameter and order of reaction on the fluid velocity, temperature and concentration distributions. Numerical data for the local skin-friction coefficient, the local Nusselt number and the local Sherwood number have been tabulated for various values of parametric conditions.     

Combined effect of magnetic field and heat absorption on unsteady free convection and heat transfer flow in a micropolar fluid past a semi-infinite moving plate with viscous dissipation using element free Galerkin method

The fully developed electrically conducting micropolar fluid flow and heat transfer along a semi-infinite vertical porous moving plate is studied including the effect of viscous heating and in the presence of a magnetic field applied transversely to the direction of the flow. The Darcy-Brinkman-Forchheimer model which includes the effects of boundary and inertia forces is employed. The differential equations governing the problem have been transformed by a similarity transformation into a system of non-dimensional differential equations which are solved numerically by element free Galerkin method. Profiles for velocity, microrotation and temperature are presented for a wide range of plate velocity, viscosity ratio, Darcy number, Forchhimer number, magnetic field parameter, heat absorption parameter and the micropolar parameter. The skin friction and Nusselt numbers at the plates are also shown graphically. The present problem has significant applications in chemical engineering, materials processing, solar porous wafer absorber systems and metallurgy.     

Effects of chemical reaction and radiation on an unsteady MHD flow past an accelerated infinite vertical plate with variable temperature and mass transfer

This paper deals with the study of the effects of first order chemical reaction and radiation on an unsteady MHD flow of an incompressible viscous electrically conducting fluid past an accelerated infinite vertical plate with variable temperature and mass transfer. The resulting approximate dimensionless system of governing partial differential equations are integrated in closed form by the Laplace transform technique A uniform magnetic field is assumed to be applied transversely to the direction of the flow. Rosseland model of radiation has been chosen in the investigation, the expressions for the velocity field, temperature field and concentration field and skin-friction in the direction of the flow, coefficient of heat transfer and mass flux at the plate have been obtained in non-dimensional form and these are illustrated graphically for various physical parameters involved in the study. Investigation reveals that the fluid velocity is decelerated in the region adjacent to the plate, due to the effect of first order chemical reaction and the rate of heat transfer (from plate to the fluid) decreases due to the absorption of thermal radiation. The results obtained in this work are consistent with physical situation of the problem.     

Effects of heat generation/absorption on stagnation point flow of nanofluid over a surface with convective boundary conditions

Analysis has been conducted to analyze the stagnation point flow of nanofluid near a permeable stretched surface with convective boundary condition. The relevant problem formulation is presented in the presence of porous medium and internal heat generation/absorption. The effects of Brownian motion and thermophoresis occur in the transport equations. The velocity, temperature and nanoparticle concentration profiles are analyzed with respect to the involved parameters of interest namely Brownian motion parameters, thermophoresis parameter, permeability parameter, source/sink parameter, ratio of rate constants to free stream velocity and stretching velocity, Biot number and Prandtl number. A comparative study between the previous published and present results in a limiting sense is found in an excellent agreement.     

Steady state solutions in a model reacting flow problem

This paper examines the existence of steady state solutions in the Fickett-Majda model of detonation-combustion when heat sources are present and the chemical kinetics is governed by a single, reversible reaction. The problem reduces to studying the bifurcations of a nonlinear algebraic equation, and conditions for existence are obtained in terms of the heat release parameter and total energy of the source     

Combined effects of non-uniform heat source/sink and thermal radiation on heat transfer over an unsteady stretching permeable surface

The present paper is concerned with the study of flow and heat transfer characteristics in the unsteady laminar boundary layer flow of an incompressible viscous fluid over continuously stretching permeable surface in the presence of a non-uniform heat source/sink and thermal radiation. The unsteadiness in the flow and temperature fields is because of the time-dependent stretching velocity and surface temperature. Similarity transformations are used to convert the governing time-dependent nonlinear boundary layer equations for momentum and thermal energy are reduced to a system of nonlinear ordinary differential equations containing Prandtl number, non-uniform heat source/sink parameter, thermal radiation and unsteadiness parameter with appropriate boundary conditions. These equations are solved numerically by applying shooting method using Runge–Kutta–Fehlberg method. Comparison of numerical results is made with the earlier published results under limiting cases. The effects of the unsteadiness parameter, thermal radiation, suction/injection parameter, non-uniform heat source/sink parameter on flow and heat transfer characteristics as well as on the local Nusselt number are shown graphically.     

Lie group analysis of natural convection heat and mass transfer in an inclined surface with chemical reaction

In this paper we examine the convective flow, heat and mass transfer of an incompressible viscous fluid past a semi-infinite inclined surface with first-order homogeneous chemical reaction by Lie group analysis. The governing partial differential equations are reduced to a system of ordinary differential equations using scaling symmetries. Numerical solutions of the resulting ordinary differential equations are obtained using the fourth-order Runge–Kutta method. From the numerical results, it is observed that the thickness of the momentum boundary layer increases with increasing the chemical reaction parameter and the Schmidt number. The thicknesses of the thermal and concentration boundary layers are decreased with increasing the chemical reaction parameter and the Schmidt number.     

Heat transfer in MHD viscoelastic fluid flow over a stretching sheet with variable thermal conductivity,non-uniform heat source and radiation

An analysis has been carried out to study the magnetohydrodynamic boundary layer flow and heat transfer characteristics of a non-Newtonian viscoelastic fluid over a flat sheet with a linear velocity in the presence of thermal radiation and non-uniform heat source. The thermal conductivity is assumed to vary as a linear function of temperature. The basic equations governing the flow and heat transfer are in the form of partial differential equations, the same have been reduced to a set of non-linear ordinary differential equations by applying suitable similarity transformation. The transformed equations are solved analytically by regular perturbation method. Numerical solution of the problem is also obtained by the efficient shooting method, which agrees well with the analytical solution. The effects of various physical parameters such as viscoelastic parameter, Chandrasekhar number, Prandtl number, variable thermal conductivity parameter, Eckert number, thermal radiation parameter and non-uniform heat source/sink parameters which determine the temperature profiles are shown in several plots and the heat transfer coefficient is tabulated for a range of values of said parameters. Some important findings reported in this work reveals that combined effect of variable thermal conductivity, radiation and non-uniform heat source have significant impact in controlling the rate of heat transfer in the boundary layer region.     

Cattaneo–Christov heat flux model for three-dimensional magnetohydrodynamic flow of an Eyring Powell fluid over an exponentially stretching surface with convective boundary condition

The present model concentrates on three-dimensional steady incompressible flow of an Eyring-Powell nanofluid past an exponentially stretching sheet with magnetic field. The Cattaneo–Christov heat flux with convective boundary condition is accounted for. Shooting method is the instrumental for obtaining numerical solution of the transformed-converted system of the mathematical models. Behavior of the determining thermo-physical parameters on the velocity, temperature, skin friction, heat transfer rate, and finally isotherms are considered. The major relevant outcomes of the current investigation are that increment in Eyring-Powell parameter uplifts flow velocity, while that peters out the fluid temperature. Enhanced values of the mixed convection parameter weakened the skin friction coefficient while it slightly strengthened the rate of heat transfer.     

Perturbation analysis of unsteady magnetohydrodynamic convective heat and mass transfer in a boundary layer slip flow past a vertical permeable plate with thermal radiation and chemical reaction

An analytical study for the problem of unsteady mixed convection with thermal radiation and first-order chemical reaction on magnetohydrodynamics boundary layer flow of viscous, electrically conducting fluid past a vertical permeable plate has been presented. Slip boundary condition is applied at the porous interface. The classical model is used for studying the effect of radiation for optically thin media. The non-linear coupled partial differential equations are solved by perturbation technique. The results obtained show that the velocity, temperature and concentration fields are appreciably influenced by the presence of chemical reaction, thermal stratification and magnetic field. It is observed that the effect of thermal radiation and magnetic field decreases the velocity, temperature and concentration profiles in the boundary layer. Also, the effects of the various parameters on the skin-friction coefficient and the rate of heat transfer at the surface are discussed.     

Buoyancy and chemical reaction effects on MHD mixed convection heat and mass transfer in a porous medium with thermal radiation and Ohmic heating

The combined effect of mixed convection with thermal radiation and chemical reaction on MHD flow of viscous and electrically conducting fluid past a vertical permeable surface embedded in a porous medium is analyzed. The heat equation includes the terms involving the radiative heat flux, Ohmic dissipation, viscous dissipation and the internal absorption whereas the mass transfer equation includes the effects of chemically reactive species of first-order. The non-linear coupled differential equations are solved analytically by perturbation technique. The results obtained show that the velocity, temperature and concentration fields are appreciably influenced by the presence of chemical reaction, thermal stratification and magnetic field. It is observed that the effect of thermal radiation and magnetic field is to decrease the velocity, temperature and concentration profiles in the boundary layer. There is also considerable effect of magnetic field and chemical reaction on skin-friction coefficient and Nusselt number.     

The effect of variable viscosity on MHD viscoelastic fluid flow and heat transfer over a stretching sheet

An analysis has been carried out to study the momentum and heat transfer characteristics in an incompressible electrically conducting non-Newtonian boundary layer flow of a viscoelastic fluid over a stretching sheet. The partial differential equations governing the flow and heat transfer characteristics are converted into highly non-linear coupled ordinary differential equations by similarity transformations. The effect of variable fluid viscosity, Magnetic parameter, Prandtl number, variable thermal conductivity, heat source/sink parameter and thermal radiation parameter are analyzed for velocity, temperature fields, and wall temperature gradient. The resultant coupled highly non-linear ordinary differential equations are solved numerically by employing a shooting technique with fourth order Runge–Kutta integration scheme. The fluid viscosity and thermal conductivity, respectively, assumed to vary as an inverse and linear function of temperature. The analysis reveals that the wall temperature profile decreases significantly due to increase in magnetic field parameter. Further, it is noticed that the skin friction of the sheet decreases due to increase in the Magnetic parameter of the flow characteristics.     

Peristaltic transport of a Newtonian fluid in a vertical asymmetric channel with heat transfer and porous medium

The problem of peristaltic flow of a Newtonian fluid with heat transfer in a vertical asymmetric channel through porous medium is studied under long-wavelength and low-Reynolds number assumptions. The flow is examined in a wave frame of reference moving with the velocity of the wave. The channel asymmetry is produced by choosing the peristaltic wave train on the walls to have different amplitudes and phase. The analytical solution has been obtained in the form of temperature from which an axial velocity, stream function and pressure gradient have been derived. The effects of permeability parameter, Grashof number, heat source/sink parameter, phase difference, varying channel width and wave amplitudes on the pressure gradient, velocity, pressure drop, the phenomenon of trapping and shear stress are discussed numerically and explained graphically.     

Analytic approximate solutions for heat transfer of a micropolar fluid through a porous medium with radiation

This paper aims to present complete analytic solution to heat transfer of a micropolar fluid through a porous medium with radiation. Homotopy analysis method (HAM) has been used to get accurate and complete analytic solution. The analytic solutions of the system of nonlinear ordinary differential equations are constructed in the series form. The convergence of the obtained series solutions is carefully analyzed. The velocity and temperature profiles are shown and the influence of coupling constant, permeability parameter and the radiation parameter on the heat transfer is discussed in detail. The validity of our solutions is verified by the numerical results (fourth-order Runge–Kutta method and shooting method).     

Hall current effect on MHD mixed convection flow from an inclined continuously stretching surface with blowing/suction and internal heat generation/absorption

Hydromagnetic heat transfer by mixed convection along an inclined continuously stretching surface, with power-law variation in the surface temperature or heat flux, in the presence of Hall current and internal heat generation/absorption has been studied. The surface is considered to be permeable to allow fluid suction or blowing, and stretching with a surface velocity varied according to a power-law. Two cases of the temperature boundary conditions were considered at the surface. The governing equations have been transformed into non-similar partial differential equations which have been integrated by the forth-order Runge–Kutta method. The effect of Hall parameter, magnetic parameter, dimensionless blowing/suction parameter, space and temperature dependent internal heat generation/absorption parameters and buoyancy force parameters on the temperature, primary and secondary flow velocity have been studied parametrically. All parameters involved in the problem affect the flow and thermal distributions except the temperature-dependent internal heat generation/absorption in the case of prescribed heat flux (PHF). Numerical values of the local skin-friction and the local Nusselt numbers for various parametric conditions have been tabulated.     

Hiemenz flow and heat transfer of a third grade fluid

The laminar flow and heat transfer of an incompressible, third grade, electrically conducting fluid impinging normal to a plane in the presence of a uniform magnetic field is investigated. The heat transfer analysis has been carried out for two heating processes, namely, (i) with prescribed surface temperature (PST-case) and (ii) prescribed surface heat flux (PHF-case). By means of the similarity transformation, the governing non-linear partial differential equations are reduced to a system of non-linear ordinary differential equations and are solved by a second-order numerical technique. Effects of various non-Newtonian fluid parameters, magnetic parameter, Prandtl number on the velocity and temperature fields have been investigated in detail and shown graphically. It is found that the velocity gradient at the wall decreases as the third grade fluid parameter increases.     

Application of a non-asymptotic approach to prediction of the propagation of a flame through a fuel and/or oxidant droplet cloud

The mathematical analysis of laminar premixed spray propagation has generally been based on exploiting the inverse of the large chemical activation energy as an appropriate parameter for asymptotic analysis. In the current work we apply a modification of a recently suggested non-asymptotic approach for gaseous flames which makes use of a different approximation. In it, only the Arrhenius exponential term in the reaction rate expression is approximated using a step function chosen so that the two functions are in proximity in an integral sense. Application of this approach is more amenable and is shown to yield a simple formula for the burning velocity of a flame propagating through a cloud of fuel and/or oxidant droplets, for the fuel rich off-stoichiometric case in which the only reactant present in the chemical reaction term is the deficient oxidant which appears linearly. Results computed with the new analytical solutions are presented and a comparison is made with the predictions using the usual large activation energy approach. In addition, a double spray is considered for the first time in which both liquid oxidant and liquid fuel feature as sprays of droplets in the unburned pre-mixture. Such a situation arises in rocket engines in which two initially separate spray streams mix in a turbulent shear flow so that locally one dimensionally propagating double spray premixed flames are created. The analysis leads to an analytical expression for the laminar burning velocity dependent on the spray- and gas-related parameters. Typical thermal and velocity maps in parametric space are presented.