The recent progress of wide bandgap donor polymers towards non-fullerene organic solar cells

The recent progress of wide bandgap (WBG) donor polymers for non-fullerene polymer solar cells (NF-PSCs) were reviewed in detail, which was classified by D-type and D-A type molecular backbones to discuss the related structure-property correlations and put forward an outlook for future innovations.     

Achieving high efficiency and low voltage loss simultaneously for non-fullerene organic solar cells

<正>Conventional organic solar cells are based on fullerene acceptors, which caused several drawbacks including poor absorption in visible and near IR regions, limited tunability of energy levels, and most importantly, large voltage loss from the optical bandgap of the cell to the open circuit voltage of the solar cell [1]. During the past few years, nonfullerene OSCs have emerged as a promising alternative to     

A near-infrared porphyrin-based electron acceptor for non-fullerene organic solar cells

A star-shaped electron acceptor with porphyrin as core and rhodanine-benzothiadiazole as end groups linked with ethynyl units was developed for non-fullerene solar cells, in which a PCE of 1.9% with broad photo response was achieved when combining with a diketopyrrolopyrrole-polymer as electron donor.     

The first application of isoindigo-based polymers in non-fullerene organic solar cells

Although isoindigo(IID)-based polymers can realize high charge mobility, these materials are currently confined to fullerenebased organic solar cells(OSCs). Herein, we designed a pair of alternative D-π-A type copolymers, PE71 and PE72, to expand the application in non-fullerene OSCs, where benzo[1,2-b:4,5-b′]thiophene(BDT), thieno[3,2-b]thiophene(TT) and IID units were used as D, A and π-bridge, respectively. The aim of optimizing the length of alkyl chains on TT bridge is to ensure polymer solubility, crystallinity as well as miscibility with acceptor molecules. We find that PE71 and PE72 exhibit similar optical and electronic properties, but PE71 with shorter hexyl chain tends to aggregate into fiber-like structure. In the end, Y6 is selected as the electron acceptor because of suitable energy levels and complementary absorption spectrum. Finally, PE71:Y6 device realizes a power conversion efficiency(PCE) of 12.03%, which is obviously higher than that of PE72:Y6 device(9.74%) and is also the highest value for IID-based photovoltaic polymers. The charge transport, molecular aggregation, film morphology and energy loss analysis were systematically investigated. The improved photovoltaic performance of PE71:Y6 mainly originates from the better interpenetrating network structure toward facilitating exciton seperation and free charge carrier transportation.Our results indicate that IID-based D-π-A polymers can also be utilized in non-fullerene OSCs and the alkyl chains on the thieno[3,2-b]thiophene π-bridge have a vital effect on the photovoltaic performance.     

The effect of end-capping groups in A-D-A type non-fullerene acceptors on device performance of organic solar cells

A series of novel wide bandgap small molecules(IFT-ECA, IFT-M, IFT-TH and IFT-IC) based on the A-D-A structure with indenofluorene core, thiophene bridge, and different electron-deficient end-capping groups, were synthesized and used as non-fullerene acceptors in organic solar cells. The influences of end-capping groups on the device performance were studied.The four materials exhibited different physical and chemical properties due to the variation of end-capping groups, which further affect the exciton dissociation, charge transport, morphology of the bulk-heterojunction films and device performance. Among them, IFT-IC-based device delivered the best power conversion efficiency of 7.16% due to proper nano-scale phase separation morphology and high electron mobility, while the devices based on the other acceptors achieved lower device performance(4.14% for IFT-TH, 1% for IFT-ECA and IFT-M). Our results indicate the importance of choosing suitable electron-withdrawing groups to construct high-performance non-fullerene acceptors based on A-D-A motif.     

Simple non-fullerene electron acceptors with unfused core for organic solar cells

Two simple unfused-cores based electron acceptors with different side units were developed for application in non-fullerene solar cells, in which the side chains have the significant effect on their absorption spectra and photovoltaic performance.     

Ethynyl-linked perylene bisimide based electron acceptors for non-fullerene organic solar cells

Star-shaped electron acceptors based on perylene bisimide as end groups and spiro-aromatic core linked with ethynyl units were developed for nonfullerene solar cells. Ethynyl linkers are able to improve the planarity of conjugated backbone, resulting in enhanced electron mobility and power conversion efficiency in solar cells.     

Recent development of perylene diimide-based small molecular non-fullerene acceptors in organic solar cells

This review summarizes the recent progress of perylene diimide (PDI) derivatives used as the acceptor materials in non-fullerene organic solar cells. The resulting structure-property correlations and design strategies of this type of acceptors are discussed and commented, which will help to constructing high-performance PDI-based acceptor materials in the future. The problems at present and the effort direction are also pointed out in this review.     

Impact of symmetry-breaking of non-fullerene acceptors for efficient and stable organic solar cells

The concurrent enhancement of short-circuit current (J_SC) and open-circuit voltage (V_OC) is a key problem in the preparation of efficient organic solar cells (OSCs). In this paper, we report efficient and stable OSCs based on an asymmetric non-fullerene acceptor (NFA) IPC-BEH-IC2F. The NFA consists of a weak electron-donor core dithienothiophen[3,2-b]-pyrrolobenzothiadiazole (BEH) and two kinds of strong electron-acceptor (A) units [9H-indeno[1,2-b]pyrazine-2,3-dicarbonitrile (IPC) with a tricyclic fused system and 2-(5,6-difluoro-3-oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrile (IC2F)]. For comparison, the symmetric NFAs IPC-BEH-IPC and IC2F-BEH-IC2F were characterised. The kind of flanking A unit significantly affects the light absorption features and electronic structures of the NFAs. The asymmetric IPC-BEH-IC2F has the highest extinction coefficient among the three NFAs owing to its strong dipole moment and highly crystalline feature. Its highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) levels lie between those of the IPC-BEH-IPC and IC2F-BEH-IC2F molecules. The IPC group also promotes molecular packing through the tricyclic π-conjugated system and achieves increased crystallinity compared to that of the IC2F group. Inverted-type photovoltaic devices based on p-type polymer:NFA blends with PBDB-T and PM6 polymers as p-type polymers were fabricated. Among all these devices, the PBDB-T:IPC-BEH-IC2F blend device displayed the best photovoltaic properties because the IPC unit provides balanced electronic and morphological characteristics. More importantly, the PBDB-T:IPC-BEH-IC2F-based device exhibited the best long-term stability owing to the strongly interacting IPC moiety and the densely packed PBDB-T:IPC-BEH-IC2F film. These results demonstrate that asymmetric structural modifications of NFAs are an effective way for simultaneously improving the photovoltaic performance and stability of OSCs.

A 9H-indeno[1,2-b]pyrazine-2,3-dicarbonitrile (IPC) moiety in asymmetric non-fullerene acceptors promotes the formation of a densely packed crystalline structure, enabling efficient and long-term stable organic solar cells.     

Understanding energetic disorder in electron-deficient-core-based non-fullerene solar cells

Recent advances in material design for organic solar cells(OSCs) are primarily focused on developing near-infrared nonfullerene acceptors, typically A-DA′D-A type acceptors(where A abbreviates an electron-withdrawing moiety and D, an electron-donor moiety), to achieve high external quantum efficiency while maintaining low voltage loss. However, the charge transport is still constrained by unfavorable molecular conformations, resulting in high energetic disorder and limiting the device performance. Here, a facile design strategy is reported by introducing the "wing"(alkyl chains) at the terminal of the DA′D central core of the A-DA′D-A type acceptor to achieve a favorable and ordered molecular orientation and therefore facilitate charge carrier transport. Benefitting from the reduced disorder, the electron mobilities could be significantly enhanced for the"wing"-containing molecules. By carefully changing the length of alkyl chains, the mobility of acceptor has been tuned to match with that of donor, leading to a minimized charge imbalance factor and a high fill factor(FF). We further provide useful design strategies for highly efficient OSCs with high FF.     

A 3D star-shaped non-fullerene acceptor for solution-processed organic solar cells with a high open-circuit voltage of 1.18 V

A novel 3D star-shaped acceptor based on triphenylamine as a core and diketopyrrolopyrrole as arms (S(TPA-DPP)) was synthesized. S(TPA-DPP) exhibited excellent thermal stability, strong absorption, and very high open-circuit voltage (1.18 V) in solution-processed organic solar cells based on P3HT:S(TPA-DPP).     

Recent developments of di-amide/imide-containing small molecular non-fullerene acceptors for organic solar cells

Non-fullerene organic solar cells have received increasing attentions in these years, and great progresses have been made since 2013. Among them, aromatic di-amide/imide-containing frameworks have shown promising applications. The outstanding properties of them are highly associated with their unique electronic and structural features, such as strong electron-withdrawing nature, broad absorption in UV-visible region, tunable HOMO/LUMO energy levels, easy modifications, and excellent chemical, thermal and photochemical stabilities. In this review, we give an overview of recent developments of aromatic diamide/imide-containing small molecules used as electron acceptors for organic solar cells.     

Utilizing 3,4-ethylenedioxythiophene(EDOT)-bridged non-fullerene acceptors for efficient organic solar cells

A rational design of efficient low-band-gap non-fullerene acceptors(NFAs)for high-performance organic solar cells(OSCs)remains challenging;the main constraint being the decrease in the energy level of the lowest unoccupied molecular orbitals(LUMOs)as the bandgap of A-D-A-type NFAs decrease.Therefore,the short current density(J_sc)and open-circuit voltage(V_oc)result in a trade-off relationship,making it difficult to obtain efficient OSCs.Herein,three NFAs(IFL-ED-4 F,IDT-ED-4 F,and IDTT-ED-2 F)were synthesized to address the above-mentioned issue by introducing 3,4-ethylenedioxythiophene(EDOT)as aπ-bridge.These NFAs exhibit relatively low bandgaps(1.67,1.42,and 1.49 eV,respectively)and upshifted LUMO levels(-3.88,-3.84,and-3.81 eV,respectively)compared with most reported low-band-gap NFAs.Consequently,the photovoltaic devices based on IDT-ED-4 F blended with a PBDB-T donor polymer showed the best power conversion efficiency(PCE)of 10.4%with a high J_sc of 22.1 mA cm^-2 and Voc of 0.884 V among the examined NFAs.In contrast,IDTT-ED-4 F,which was designed with an asymmetric structure of the D-p-A type,showed the lowest efficiency of 1.5%owing to the poor morphology and charge transport properties of the binary blend.However,when this was introduced as the third component of the PM6:BTP-BO-4 Cl,complementary absorption and cascade energy-level alignment between the two substances could be achieved.Surprisingly,the IDTT-ED-4 F-based ternary blend device not only improved the Jscand Voc,but also achieved a PCE of 15.2%,which is approximately 5.3%higher than that of the reference device with a minimized energy loss of 0.488 eV.In addition,the universality of IDTT-ED-2 F as a third component was effectively demonstrated in other photoactive systems,specifically,PM6:BTPe C9 and PTB7-Th:IEICO-4 F.This work facilitates a better understanding of the structure–property relationship for utilizing efficient EDOT-bridged NFAs in high-performance OSC applications.     

Single-wall carbon nanotube-containing cathode interfacial materials for high performance organic solar cells

Water/alcohol soluble cathode interfacial materials(CIMs)are playing important roles in optoelectronic devices such as organic light emitting diodes,perovskite solar cells and organic solar cells(OSCs).Herein,n-doped solution-processable single-wall carbon nanotubes(SWCNTs)-containing CIMs for OSCs are developed by dispersing SWCNTs to the typical CIMs perylene diimide(PDI)derivatives PDIN and PDINO.The Raman and X-ray photoelectron spectroscopy(XPS)measurement results illustrate the ndoped behavior of SWCNTs by PDIN/PDINO in the blend CIMs.The blended and n-doped SWCNTs can tune the work function and enhance the conductivity of the PDI-derivative/SWCNT(PDI-CNT)composite CIMs,and the composite CIMs can regulate and down-shift the work function of cathode,reduce the charge recombination,improve the charge extraction rate and enhance photovoltaic performance of the OSCs.High power conversion efficiency(PCE)of 17.1%and 17.7%are obtained for the OSCs based on PM6:Y6 and ternary PM6:Y6:PC₇₁ BM respectively with the PDI-CNTcomposites CIMs.These results indicate that the ndoped SWCNT-containing composites,like other n-doped nanomaterials such as zero dimensional fullerenes and two dimensional graphenes,are excellent CIMs for OSCs and could find potential applications in other optoelectronic devices.     

A new non-fullerene acceptor based on the heptacyclic benzotriazole unit for efficient organic solar cells

正Non-fullerene acceptors (NFAs) become an interesting family of organic photovoltaic materials, and have attracted considerable interest for their great potential in manufacturing large-area flexible solar panels by low cost coating methods [1–5]. Recently, our group proposed in the first time an A-DA’D-A molecular strategy and synthesized a new class of non-fullerene acceptor Y6 with a record efficiency above 15%with single junction organic solar cells (OSCs)[6]. To further improve the photovoltaic performance     

A chlorinated non-fullerene acceptor for efficient polymer solar cells

After additive and thermal annealing treatment, the PM6:Y15 based device obtains a high power conversion efficiency of 14.13%.     

Incremental optimization in donor polymers for bulk heterojunction organic solar cells exhibiting high performance

The power conversion efficiency of an organic solar cell has now exceeded the 10% mark, which is a significant improvement in the last decade. This has been made possible due to the development of low-band-gap polymers with tunable electron affinity, ionization potential, solubility, and miscibility with the fullerene acceptor, and the improved understanding of the factors affecting the critical device parameters such as the V_OC and the J_SC. This review examines the latest strategies, results, and trends that have evolved in the design of solar cells with better efficiency and durability. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Additive-free non-fullerene organic solar cells with random copolymers as donors over 9% power conversion efficiency

The PBDB-TBT1:ITIC-based device obtains PCE of 9.09%, and is insensitive to additive and thermal annealing, and forms microstructural morphology.     

Effects of processing additives in non-fullerene organic bulk heterojunction solar cells with efficiency >11%

The solar cell surface morphologies with different additives observed with slightly changed in roughness. It is easily to get the best PCE of 11.1% with using 0.5% DIO additives.     

A chlorinated non-fullerene acceptor for efficient polymer solar cells

Improving the performance and reducing the manufacturing costs are the main directions for the development of organic solar cells in the future. Here, the strategy that uses chemical structure modification to optimize the photoelectric properties is reported. A new narrow bandgap (1.30 eV) chlorinated non-fullerene electron acceptor (Y15), based on benzo[d][1,2,3] triazole with two 3-undecyl-thieno[2′,3′:4,5] thieno[3,2-b] pyrrole fused -7-heterocyclic ring, with absorption edge extending to the near-infrared (NIR) region, namely A-DA'D-A type structure, is designed and synthesized. Its electrochemical and optoelectronic properties are systematically investigated. Benefitting from its NIR light harvesting, the fabricated photovoltaic devices based on Y15 deliver a high power conversion efficiency (PCE) of 14.13%, when blending with a wide bandgap polymer donor PM6. Our results show that the A-DA'D-A type molecular design and application of near-infrared electron acceptors have the potential to further improve the PCE of polymer solar cells (PSCs).