Recent advances in plasmonic organic photovoltaics

Light trapping based on the localized surface-plasmon resonance(LSPR)effect of metallic nanostructures is a promising strategy to improve the device performance of organic solar cells(OSCs).We review recent advances in plasmonic-enhanced OPVs with solution-processed metallic nanoparticles(NPs).The different types of metallic NPs(sizes,shapes,and hybrids),incorporation positions,and NPs with tunable resonance wavelengths toward broadband enhancement are systematically summarized to give a guideline for the realization of highly efficient plasmonic photovoltaics.     

A two-step method combining electrodepositing and spin-coating for solar cell processing

Electrochemistry provides a simple and promising method for preparing organic solar cells (OSCs). In this paper, we present a two-step solution-based method to prepare bilayer heterojunction OSCs by electrodepositing polythiophene (PTh) and then spin-coating chloroform solution of [6,6]-phenyl C61-butyric acid methyl ester (PCBM) onto the PTh layer. The influence of film thickness on performance of bilayer solar cells was investigated, and the best performance was achieved when the thickness of PTh and PCBM was 15 nm and 30 nm, respectively. The optimized solar cell showed power conversion efficiency of 0.1% under the illumination of AM 1.5 (100 mW cm⁻²) simulated solar light. This solution-based method offers a new way for processing bilayer OSCs.     

TFTTP作为阴极缓冲层提高有机薄膜太阳能电池的内建电场和载流子收集效率

采用一种新型的电子传输材料TFTTP作为阴极缓冲层提高基于SubPc/C60异质结的有机薄膜太阳能电池的性能. 通过在有机活性层和金属电极之间加入TFTTP界面层,器件的能量转换效率提高了约30%. 系统研究了器件的二极管特性、光电流特性以及内部的光场分布情况,结果表明,TFTTP阴极缓冲层的引入可以有效地提高器件的内建电场,进而增加电荷转移激子的分离效率. 通过使用TFTTP作为阴极缓冲层,在C60/金属界面形成良好的欧姆接触,降低了界面接触电阻,有利于自由载流子的收集.     

Enhanced Fluorescence Using an Optical Interference Mirror Overlaid with Silver Island Film

Fluorophores overlaid on an optical interference mirror composed of a metal and thin dielectric layer demonstrate enhanced fluorescence. Fluorescence is also enhanced by silver nanostructures such as silver island films, which excite localized surface plasmon resonance. An optical interference mirror surface was overlaid with a silver island film to amplify the fluorescence enhancement. The optimal thickness of the silver island film (100 nm) was evaluated from transmittance and surface roughness measurements. At this thickness, the fluorescence was amplified sixteen-fold. The thickness of the interference layer was optimized at 40 nm providing a one hundred-sixty fold fluorescence enhancement of rhodamine B. However, only a four-fold improvement in sensitivity was achieved for the determination of a labeled streptavidin using biotin immobilized on the silver island film interference mirror.     

Revealing the Unusual Efficiency Enhancement of Organic Solar Cells with Polymer-Donor-Treated Cathode Contacts

Chinese Journal of Polymer Science - The metal oxides with low trap density of states as the electron transport layer are crucial for the high performance of the organic solar cells (OSCs). It is...     

High electron mobility fluorinated indacenodithiophene small molecule acceptors for organic solar cells

Indacenodithiophene (IDT) derivatives are kinds of the most representative and widely used cores of small molecule acceptors (SMAs) in organic solar cells (OSCs). Here we systematically investigate the influence of end-group fluorination density and position on the photovoltaic properties of the IDT-based SMAs IDIC-nF (n = 0, 2, 4). The absorption edge of IDIC-nF red-shifts with the π-π stacking and crystallinity improvement, and their electronic energy levels downshift with increasing n. Due to the advantages of J_sc and FF as well as acceptable V_oc, the difluorinated IDIC-2F acceptor based OSCs achieve the highest power conversion efficiency (PCE) of 13%, better than the OSC devices based on IDIC and IDIC-4F as acceptors. And the photovoltaic performance of the PTQ10: IDIC-2F OSCs is insensitive to the active layer thickness: PCE still keep high values of 12.00% and 11.46% for the devices with active layer thickness of 80 and 354 nm, respectively. This work verifies that fine and delicate modulation of the SMAs molecular structure could optimize photovoltaic performance of the corresponding OSCs. Meanwhile, the thickness-insensitivity property of the OSCs has potential for large-scale and printable fabrication technology.     

纳米银米表面等离子激元增强上转换发光

上转换纳米发光材料因发光效率普遍较低限制了其在应用领域的进一步发展。利用贵金属的局域表面等离子体共振特性调控发射体的局域场成为提高上转换纳米粒子发光性能的有效途径之一。在这个工作中,我们利用合成工艺简单的贵金属米状结构,通过调控上转换纳米颗粒周围的局域场,实现了上转换发光强度的大幅提高。结合三维有限元方法研究了在实际薄膜中Ag米之间可能出现的不同接触方式对所产生的局域场增强效果的影响,同时证实这种局域等离激元耦合所引起的电磁场增强是提高上转换发光性能的重要因素,并且获得了上转换发光将近百倍的增强效果。最后,通过调控等离子层和发光层的厚度,实现上转换发光性能的进一步优化。     

Non-fullerene acceptor fibrils enable efficient ternary organic solar cells with 16.6% efficiency

Optimizing the components and morphology within the photoactive layer of organic solar cells(OSCs) can significantly enhance their power conversion efficiency(PCE). A new A-D-A type non-fullerene acceptor IDMIC-4F is designed and synthesized in this work, and is employed as the third component to prepare high performance ternary solar cells. IDMIC-4F can form fibrils after solution casting, and the presence of this fibrillar structure in the PBDB-T-2F:BTP-4F host confines the growth of donors and acceptors into fine domains, as well as acting as transport channels to enhance electron mobility. Single junction ternary devices incorporating 10 wt% IDMIC-4F exhibit enhanced light absorption and balanced carrier mobility, and achieve a maximum PCE of 16.6% compared to 15.7% for the binary device, which is a remarkable efficiency for OSCs reported in literature. This non-fullerene acceptor fibril network strategy is a promising method to improve the photovoltaic performance of ternary OSCs.     

双金属双硅层核-壳纳米结构Au@SiO2@Ag@SiO2用于葡萄糖检测

制备了一种灵敏度高、 稳定性强的双金属双硅层核-壳结构纳米材料Au@SiO₂@Ag@SiO₂. 由于双金属之间的硅层促进了远程等离子体的激发转移, 使该纳米粒子具有良好的表面增强拉曼散射(SERS)的特性及优异的稳定性. 利用这种SERS活性材料能直接检测出人体尿液的主要成分, 且该材料呈现出对低浓度(10^-6 mol/L)葡萄糖的无标记高效检出能力. 此外, 还实现了人工尿液中等浓度(10^-3 mol/L)葡萄糖和尿素分子的同时检测, 以及实际尿液中10^-3 mol/L葡萄糖的检测. Au@SiO₂@Ag@SiO₂纳米粒子具有在多种生物分子存在时快速检测葡萄糖的实际应用潜力.     

A Polyfluoroalkyl-Containing Non-fullerene Acceptor Enables Self-Stratification in Organic Solar Cells

The elaborate control of the vertical phase distribution within an active layer is critical to ensuring the high performance of organic solar cells (OSCs), but is challenging. Herein, a self-stratification active layer is realised by adding a novel polyfluoroalkyl-containing non-fullerene small-molecule acceptor (NFSMA), EH-C₈F₁₇, as the guest into PM6:BTP-eC9 blend. A favourable vertical morphology was obtained with an upper acceptor-enriched thin layer and a lower undisturbed bulk heterojunction layer. Consequently, a power conversion efficiency of 18.03 % was achieved, higher than the efficiency of 17.40 % for the device without EH-C₈F₁₇. Additionally, benefiting from the improved charge transport and collection realised by this self-stratification strategy, the OSC with a thickness of 350 nm had an impressive PCE of 16.89 %. The results of the study indicate that polyfluoroalkyl-containing NFSMA-assisted self-stratification within the active layer is effective for realising an ideal morphology for high-performance OSCs.     

Full Solution‐Processed Synthesis and Mechanisms of a Recyclable and Bifunctional Au/ZnO Plasmonic Platform for Enhanced UV/Vis Photocatalysis and Optical Properties

The synthesis of noble metal/semiconductor hybrid nanostructures for enhanced catalytic or superior optical properties has attracted a lot of attention in recent years. In this study, a facile and all‐solution‐processed synthetic route was employed to demonstrate an Au/ZnO platform with plasmonic‐enhanced UV/Vis catalytic properties while retaining strengthened luminescent properties. The visible‐light response of photocatalysis is supported by localized surface plasmon resonance (LSPR) excitations while the enhanced performance under UV is aided by charge separation and strong absorption. The enhancement in optical properties is mainly due to local field enhancement effect and coupling between exciton and LSPR. Luminescent characteristics are investigated and discussed in detail. Recyclability tests showed that the Au/ZnO substrate is reusable by cleaning and has a long shelf life. Our result suggests that plasmonic enhancement of photocatalytic performance is not necessarily a trade‐off for enhanced near‐band‐edge emission in Au/ZnO. This approach may give rise to a new class of versatile platforms for use in novel multifunctional and integrated devices.     

Pyrrole-Based Fully Non-fused Acceptor for Efficient and Stable Organic Solar Cells

Organic solar cells (OSCs) are still suffering from the low light utilization and unstable under ultraviolet irradiation. To tackle these challenges, we design and synthesize a non-fused acceptor based on 1-(2-butyloctyl)-1H-pyrrole as π-bridge unit, denoted as GS70, which serves as active layer in the front-cell for constructing tandem OSCs with a parallel configuration. Benefiting from the well-complementary absorption spectra with the rear-cell, GS70-based parallel tandem OSCs exhibit an improved photoelectron response over the range between 600–700 nm, yielding a high short-circuit current density of 28.4 mA cm⁻². The improvement in light utilization translates to a power conversion efficiency of 19.4 %, the highest value among all parallel tandem OSCs. Notably, owing to the intrinsic stability of GS70, the manufactured parallel tandem OSCs retain 84.9 % of their initial PCE after continuous illumination for 1000 hours. Overall, this work offers novel insight into the molecular design of low-cost and stability non-fused acceptors, emphasizing the importance of adopting a parallel tandem configuration for achieving efficient light harvesting and improved photostability in OSCs.     

Dye-labeled silver nanoshell-bright particle

Silica beads with average diameters of 40-600 nm were prepared, and Ru(bpy)3(2+) complexes were incorporated into the beads. These beads were coated by silver layer by layer to generate porous but continuous metal nanoshells. The thicknesses of these metal shells were 5-50 nm. The emission band from the dyes in the silica cores was more narrow and the intensity was enhanced with growth of silver shell thickness due to coupling of the emission light from Ru(bpy)3(2+) in the cores with the metal plasmon from the silver shells. The enhancement of emission intensity was also dependent on the size of the silica core, showing that the enhancement efficiency decreased with an increase in the size of the silica beads. Lifetime measurements support the coupling mechanism between the dye and metal shell. This study can be used to develop novel dye-labeled metal particles with bright and narrow emission bands.     

Mapping of surface-enhanced fluorescence on metal nanoparticles using super-resolution photoactivation localization microscopy

Photoactivation localization microscopy (PALM) was applied to study surface-enhanced fluorescence (SEF) on metal nanostructures (SEF-PALM). The detection of fluorescence from individual single molecules can be used to image the point-spread-function and spatial distribution of the fluorescence emitted in the vicinity of a metal surface. Due to the strong scattering effect, the angular distribution of the fluorescence is altered by metals, resulting in a spatial shift of fluorescence spots with respect to the metal nanostructures, and has to be taken into account in the analysis. SEF-PALM can be used to discriminate effects of labelling density when estimating the enhancement factor in SEF. Furthermore, nanostructures with sizes below the diffraction limit can be resolved using this technique. SEF-PALM is established as a powerful tool to study plasmon-mediated phenomena on metal nanostructures.     

Co-La-Based Hole-Transporting Layers for Binary Organic Solar Cells with 18.82 % Efficiency

Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) is a widely used hole transporting layer (HTL) in organic solar cells (OSCs), but its acidity severely reduces the stability of devices. Until now, very few HTLs were developed to replace PEDOT:PSS toward stable and high-performance OSCs. Herein, a new cobalt-lanthanum (Co-La) inorganic system was reported as HTL to show a high conversion efficiency (PCE) of 18.82 %, which is among the top PCEs in binary OSCs. Since electron-rich outer shell of La atom can interact with Co atom to form charge transfer complex, the work function and conductivity of the Co-La system could be simultaneously enhanced compared to Co or La-based HTLs. This Co-La system could also be applied into other OSCs to show high performance. All these results demonstrate that binary Co-La systems as HTL can efficiently tackle the issue in hole transporting and show powerful application in OSCs to replace PEDOT:PSS.     

Optimizing the Photovoltaic Performance of Organic Solar Cells for Indoor Light Harvesting

Organic solar cells (OSCs) harvesting indoor light are highly promising for emerging technologies, such as internet of things. Herein, the photovoltaic performance of PTB7-Th:PC₇₁BM solar cells constructed using “optimized (with 1,8-diiodooctane (DIO))” and “non-optimized (without DIO)” processing conditions are compared for indoor and outdoor applications. We find that in comparison to the “optimized” solar cell, the “non-optimized” solar cell is less efficient under simulated solar light illumination (100 mW cm⁻², spectral range 350–1100 nm), owing to significant bimolecular charge carrier recombination losses. However, under simulated indoor illumination (3.28 mW cm⁻², spectral range 400–700 nm), bimolecular recombination losses are effective suppressed, thus the power conversion efficiency of the solar cell without DIO was increased to 14.7 %, higher than that of the solar cell with DIO (14.2 %). These results suggest that the common strategy used to optimize the OSCs could be undesired for indoor OSCs. We demonstrate that the efforts for realizing the desired “morphology” of the active layer for the outdoor OSCs may be unnecessary for indoor OSCs, allowing us to realize high-efficiency indoor OSCs using a non-halogenated solvent.     

Silver Coated Platinum Core–Shell Nanostructures on Etched Si Nanowires: Atomic Layer Deposition (ALD) Processing and Application in SERS

A new method to prepare plasmonically active noble metal nanostructures on large surface area silicon nanowires (SiNWs) mediated by atomic layer deposition (ALD) technology has successfully been demonstrated for applications of surface‐enhanced Raman spectroscopy (SERS)‐based sensing. As host material for the plasmonically active nanostructures we use dense single‐crystalline SiNWs with diameters of less than 100 nm as obtained by a wet chemical etching method based on silver nitrate and hydrofluoric acid solutions. The SERS active metal nanoparticles/islands are made from silver (Ag) shells as deposited by autometallography on the core nanoislands made from platinum (Pt) that can easily be deposited by ALD in the form of nanoislands covering the SiNW surfaces in a controlled way. The density of the plasmonically inactive Pt islands as well as the thickness of noble metal Ag shell are two key factors determining the magnitude of the SERS signal enhancement and sensitivity of detection. The optimized Ag coated Pt islands on SiNWs exhibit great potential for ultrasensitive molecular sensing in terms of high SERS signal enhancement ability, good stability and reproducibility. The plasmonic activity of the core‐shell Pt//Ag system that will be experimentally realized in this paper as an example was demonstrated in numerical finite element simulations as well as experimentally in Raman measurements of SERS activity of a highly diluted model dye molecule. The morphology and structure of the core‐shell Pt//Ag nanoparticles on SiNW surfaces were investigated by scanning‐ and transmission electron microscopy. Optimized core–shell nanoparticle geometries for maximum Raman signal enhancement is discussed essentially based on the finite element modeling.     

Transition metal oxides as hole-transporting materials in organic semiconductor and hybrid perovskite based solar cells

Organic polymer solar cells (OSCs) and organic-inorganic hybrid perovskite solar cells (PSCs) have achieved notable progress over the past several years. A central topic in these fields is exploring electronically efficient, stable and effective hole-transporting layer (HTL) materials. The goal is to enhance hole-collection ability, reduce charge recombination, increase built-in voltage, and hence improve the performance as well as the device stability. Transition metal oxides (TMOs) semiconductors such as NiO _x , CuO _x , CrO _x , MoO _x , WO₃, and V₂O₅, have been widely used as HTLs in OSCs. These TMOs are naturally adopted into PSC as HTLs and shows their importance. There are similarities, and also differences in applying TMOs in these two types of main solution processed solar cells. This concise review is on the recent developments of transition metal oxide HTL in OSCs and PSCs. The paper starts from the discussion of the cation valence and electronic structure of the transition metal oxide materials, followed by analyzing the structure-property relationships of these HTLs, which we attempt to give a systematic introduction about the influences of their cation valence, electronic structure, work function and film property on device performance.     

Ag作催化剂制备的GaN的形貌及其性能

用化学气相沉积法(CVD)在Si(100)衬底上以Ag纳米颗粒为催化剂制备了微纳米结构的GaN,原料是熔融态的金属Ga和气态的NH3。采用X射线衍射仪(XRD)、透射电镜(TEM)、X-ray能谱仪(EDS)、场发射扫描电子显微镜(SEM)、光致发光能谱(PL)和霍尔效应测试对样品进行了结构、成分、形貌和发光、电学性能分析。结果表明:生成的自组装GaN为六方纤锌矿的类似小梯子的微纳米单晶结构,且在不同的温度下,GaN的发光性能和电学性能也有所不同,相对于强的紫外发光峰,其它杂质发光峰很微弱,且均呈p型导电。对本实验所得到的GaN微纳米结构的可能形成机理进行了探讨。