ZIF-67 derived carbon wrapped discontinuous CoxP nanotube as anode material in high-performance Li-ion battery

Transition metal phosphides (TMPs) are prospective anode materials for lithium-ion batteries (LIBs) due to their high theoretical capacities and low redox voltages. Herein, we report a template directing method to develop a tube-sheath hybrid composing of cobalt phosphide particles encapsulated in metal organic frameworks (MOFs) derived N-doped carbon sheaths (Co_xP@NC). The utilization of directing template leads to a homogenous distribution of the subsequently formed cobalt phosphide particles, restrains the aggregation of cobalt phosphides, and thus results in the superb rate capability and cyclability. Contributable to the integrated merits of the interior downsized cobalt phosphide particles and the outer ZIF-67 derived porous carbon sheath, the volume expansion during cycling is effectively suppressed. The Co_xP@NC hybrid shows superb electrochemical performance as anode material for LIB, with good reversible capacity of 928 mAh·g^?1 after 100 cycles at 0.1 A g^?1, and high stability of 526 mAh·g^?1 after 600 cycles at 1.0 A g^?1. This work provides a route for rational design of MOF derived carbon-based anode material for LIB, which could also be applied as a promising platform in diverse field.     

A novel cellulose membrane from cattail fibers as separator for Li-ion batteries

Cellulose - Cattail is widely abounding in wetlands and marshes and is usually considered as an abundant and inexpensive biomass lignocellulose resource due to its rapid growth. In this paper, a...     

ZIF-67 derived hollow Ni-Co-Se nano-polyhedrons for flexible hybrid supercapacitors with remarkable electrochemical performances

Nano-polyhedral NiSe₂/CoSe₂ (Ni-Co-Se) with hollow architectures are synthesized by selenizing the precursors of Ni-Co bimetallic hydroxides that are directly derived from ZIF-67. The as-fabricated Ni-Co-Se electrodes exhibit high specific capacitance of 1668 F/g at 1 A/g accompanying with outstanding rate capability (about 82.8% retention of the initial capacity at 20 A/g). The corresponding Ni-Co-Se//AC all-solid-state hybrid supercapacitors are assembled by directly using the Ni-Co-Se on carbon fabric as the positive electrode, which deliver high energy density and power density (38.5 Wh/kg at 802.1 W/kg, 32.0 Wh/kg at 8008.8 W/kg), excellent cyclic stability (82.3% retention after 5000 cycle) and robust mechanical flexibility (no obvious attenuation at bending to different angles). This work will provide a new and smart route for constructing transition metal selenides for supercapacitor devices.     

Bimetallic ZIFs-derived electrospun carbon nanofiber membrane as bifunctional oxygen electrocatalyst for rechargeable zinc-air battery

The recharged zinc-air battery(ZAB) has drawn significant attention owing to increasing requirement for energy conversion and storage devices.Fabricating the efficient bifunctional oxygen catalyst using a convenient strategy is vitally important for the rechargeable ZAB.In this study,the bimetallic ZIFs-containing electrospun(ES) carbon nanofibers membrane with hierarchically porous structure was prepared by coaxial electrospinning and carbonization process,which was expected to be a bifunctiona...     

Preparation of cation exchange membrane as a separator for the all-vanadium redox flow battery

Chlorosulfonated homogeneous polyethylene (PE) dense film (PE-X) and asymmetric membrane (MH-X) were tested as separators for the all-vanadium redox flow battery. The membranes are prepared by the vapour phase chlorosulfonation of the PE film. The measured lowest resistivites equilibrated in 2 M KCl aqueous solution were 0.27 Ω cm² and 0.96 Ω cm², respectively, for PE-X (with thickness 20 μm) and for MH-X (with PE-layer 20 μm). The area resistivities of the membranes as separators in the all-vanadium redox flow battery were obtained. At a charge-discharge current density 633 A/m², these values were 3.09 Ω cm² and 3.46 Ω cm², respectively, for charge and discharge PE-X, and were 3.26 Ω cm² and 8.30 Ω cm², respectively, for charge and discharge MH-X.     

Influence of solvent type on porosity structure and properties of polymer separator for the Li-ion batteries

Polyethylene-supported polymethyl methacrylate/poly(vinylidene fluoride-co-hexafluoropropylene) separator for gel polymer lithium-ion battery use was prepared with a mixed solvent of n-butanol and acetone. The prepared separator was characterized with scanning electron spectroscopy and X-ray diffraction, and its performance was investigated by electrochemical impedance spectroscopy and battery charge/discharge test. Compared to the separator prepared with acetone, the separator prepared with the mixed solvent shows an enhanced porosity (from 42 to 49 %) and electrolyte uptake (from 104 to 125 %). The ionic conductivity of the corresponding gel polymer electrolyte is improved from 2.81 to 3.39 mS cm^?1, the discharge capacity retention of the LiCoO₂/artificial graphite battery is increased from 95 to 98 % after 100 cycles at 0.5 C, and the discharge capacity of the battery at 1 C increases by 4 %.     

Properties of electrospun PVDF/PMMA/CA membrane as lithium based battery separator

Poly vinylidene fluoride:poly methyl methacrylate:cellulose acetate (CA) at ratios of 100:0:0, 90:10:0, 90:5:5 and 90:0:10 respectively, were successfully electrospun. These membranes were mixed to form a 12 wt% solution prepared with volume ratio 7:3 of DMAc:acetone solvents. These membranes were then analyzed using differential scanning calorimetry, scanning electron microscopy, FTIR, WAXD, pore size, porosity% and electrolyte uptake (EU)%. It was observed that the best absorption results were obtained in the presence of CA. The electrospun membrane at ratio of 90:0:10 was observed with the highest porosity of 99.1 % and EU at 323 %. It also had a 43.6 % crystallinity and a 162 °C melting temperature. It was then concluded that addition of CA improved the separator properties.     

Crosslinking of anion exchange membrane by accelerated electron radiation as a separator for the all-vanadium redox flow battery

The commercially available anion exchange membrane was crosslinked by accelerated electron radiation, and the performance of the all-vanadium redox flow battery using the crosslinked membrane was measured. The current efficiency of the cell using the crosslinked membrane was higher than that of the cell using the non-crosslinked membrane. The all-vanadium redox flow battery which used the crosslinked membrane (at a dose of 5 Mrad) had better performance with a current efficiency of 93.5%, voltage efficiency of 87.7% and overall energy efficiency of 82%. The overall energy efficiency over of 80% which was achieved for the all-vanadium redox flow battery makes it one of the most promising alternative energy storage systems currently under development. The performance properties of the cell using the crosslinked membrane (at a dose of 5 Mrad) did not change over several cycles showing good chemical stability of the membrane.     

Novel sulfonated polyimide/ZrO2 composite membrane as a separator of vanadium redox flow battery

Sulfonated polyimide (SPI) and ZrO₂ are blended to prepare a series of novel SPI/ZrO₂ composite membranes for vanadium redox flow battery (VRFB) application. Results of atomic force microscopy and X‐ray diffraction reveal that ZrO₂ is successfully composited with SPI. All SPI/ZrO₂ membranes possess high proton conductivity (2.96–3.72 × 10^?2 S cm^?1) and low VO²⁺ permeability (2.18–4.04 × 10^?7 cm² min^?1). SPI/ZrO₂‐15% membrane is determined as the optimum one on account of its higher proton selectivity and improved chemical stability. The VRFB with SPI/ZrO₂‐15% membrane presents higher coulombic efficiency and energy efficiency than that with Nafion 117 membrane at the current density, which ranged from 20 to 80 mA cm^?2. Cycling tests indicate that the SPI/ZrO₂‐15% membrane has good operation stability in the VRFB system. Copyright © 2014 John Wiley & Sons, Ltd.     

Sulfonated poly(phthalazinone ether sulfone) membrane as a separator of vanadium redox flow battery

To develop a novel and low-cost membrane as a separator of vanadium redox flow battery, sulfonated poly(phthalazinone ether sulfone) (SPPES) was prepared by sulfonating PPES with fuming sulfuric acid. By testing the sulfonation degree, intrinsic viscosity, and solubility of SPPES, the results showed that sulfonated polymers had higher intrinsic viscosities and excellent solubility in most polar solvents. IR analysis revealed that the –SO₃H group was successfully attached to SPPES backbone. DSC and TG results showed that SPPES exhibited higher T _g than that of PPES, and T _d at the first weight loss of SPPES was about 300?°C. The SPPES membrane (SP-02) showed a dramatic reduction in crossover of vanadium ions across the membrane compared with that of the Nafion membrane. Cell tests identified that VRB with the SPPES membrane exhibited a lower self-discharge rate, higher coulombic efficiency (92.82%), and higher energy efficiency (67.58%) compared with the Nafion system. Furthermore, cycling tests indicated that the single cell with SPPES membrane exhibited a stable performance during 100?cycles.     

Zeolitic imidazolate framework-67 (ZIF-67) rhombic dodecahedrons as full-spectrum light harvesting photocatalyst for environmental remediation

The inferior utilization efficiency of light is the main obstacle to the practical application of traditional photocatalysts such as TiO₂ and ZnO. In this regard, the development of novel photocatalysts with the capability of harvesting full spectrum light (from ultraviolet (UV) to near-infrared (NIR)) energy is a promising solution for solar energy conversion and environmental remediation. Here, we report the discovery of a single material that can harvest UV, visible (VIS), and NIR radiations to decompose heavy metal contaminants in aqueous solution. Zeolitic imidazolate framework-67 (ZIF-67) rhombic dodecahedrons were synthesized through a facile solution approach and employed in the reduction of Cr(VI) under UV−VIS−NIR pulsed laser irradiation, which was generated from the fundamental, second and third harmonics of Nd:YAG laser, respectively. The nanostructures showed efficient Cr(VI) reduction under UV, VIS and NIR laser irradiation and the measured reduction efficiency (%) was 71.22%, 69.52%, and 40.79%, respectively after 120 min. A possible explanation for the photocatalytic activity in Cr(VI) reduction was proposed. This is the first study of its kind where pulsed laser and ZIF-67 rhombic dodecahedrons capable of harvesting full spectrum light energy have been employed for the removal of Cr(VI) from water. The extraordinary capacity of harvesting full-spectrum light and long-term stability make ZIF-67 a potential photocatalyst for environmental remediation.     

MoS2 decorated lignin-derived hierarchical mesoporous carbon hybrid nanospheres with exceptional Li-ion battery cycle stability

We developed a feasible self-assembly and carbonization method to prepare lignin-derived porous carbon nanosphere (PCN) and its efficient embedment of MoS₂ without any additives. The obtained hybrid nanocomposite provides a possible route to develop high performance Li-ion battery from natural biomass or organizational structures.     

Activated graphene as a cathode material for Li-ion hybrid supercapacitors

Chemically activated graphene ('activated microwave expanded graphite oxide', a-MEGO) was used as a cathode material for Li-ion hybrid supercapacitors. The performance of a-MEGO was first verified with Li-ion electrolyte in a symmetrical supercapacitor cell. Hybrid supercapacitors were then constructed with a-MEGO as the cathode and with either graphite or Li(4)Ti(5)O(12) (LTO) for the anode materials. The results show that the activated graphene material works well in a symmetrical cell with the Li-ion electrolyte with specific capacitances as high as 182 F g(-1). In a full a-MEGO/graphite hybrid cell, specific capacitances as high as 266 F g(-1) for the active materials at operating potentials of 4 V yielded gravimetric energy densities for a packaged cell of 53.2 W h kg(-1).     

Loading of ZIF-67 on silk with sustained release of iodine as biocompatible antibacterial fibers

Antibacterial fibers have great potential in numerous applications, including bandages, surgical robes, and surgical sutures, and play a significant role in our everyday lives. Here, zeolitic imidazolate framework-67 was synthesized using a green method on silk fibers through a layer-by-layer process under ultrasonic irradiation (ZIF-67@silk [U]) and without ultrasonic irradiation (ZIF-67@silk [B]). Then, iodine was loaded on ZIF-67@silk samples and were assessed as antibacterial fibers with iodine release. Four samples of ZIF-67@silk and I₂@ZIF-67@silk were characterized by FT-IR, PXRD, FE-SEM, TGA, BET, and UV–Vis spectroscopy. Finally, antibacterial activity of ZIF-67@silk (B and U) and I₂@ZIF-67@silk (B and U) on Staphylococcus aureus as Gram-positive bacteria and Escherichia coli as Gram-negative bacteria was investigated. In addition to ZIF-67@silk samples, iodine-loaded samples showed excellent antimicrobial facility.     

Hydrothermal synthesis of Zn2SnO4 as anode materials for Li-ion battery

Spinel Zn2SnO4 particles with the cubic shape are prepared via a hydrothermal reaction under mild conditions. The hydrothermal conditions, such as alkaline concentration, reaction temperature, and duration time, have an important influence on the product structure and the performance of the electrode prepared with the product. The optimized product is cube-shaped Zn2SnO4 crystalline, which is prepared with 0.4 M of NaOH solution at 200 degrees C for 24 h. These cube-shaped Zn2SnO4 particles with the spinel structure exhibit a large electrochemical capacity of 988 mA h/g and a relatively good capacity retention as anode materials for Li-ion battery. The structures of the as-prepared product and specimens taken from the electrodes after charging-discharging cycles are analyzed by X-ray diffraction, scanning electron microscopy, and transition electron microscopy techniques. In particular, it is found for the first time that the spinel Zn2SnO4 structure exists to a great extent after the first cycle and contributes to the extremely high reversible capacity during the following cycles.     

树脂包覆ZIF-67衍生物制备Co-基氮掺杂多孔碳材料作为ORR催化剂的研究

高稳定性、高性能、低成本的氧还原反应（ORR）非贵金属催化剂对碱性燃料电池的发展具有重大意义。本研究利用杂原子（N,S）掺杂多孔碳材料和ZIF-67中非贵金属的协同作用制备出性能优良的非贵金属催化剂Co-N/S@CET。物理表征得出炭化后的催化剂表面具有介孔结构,且Co和N进行了大量配位,并且通过XPS测试揭示了催化剂中具有大量Co-N_x活性位点。电化学测试结果表明,Co-N/S@CET具有良好的ORR活性和稳定性,极限电流密度达5.0mA/cm²,半波电位达0.85V,且具有优异的稳定性（10000s后仅衰减4%）。     

Multilayered structure of N-carbonenvelopediron oxide/graphene nanocomposites as an improved anode for Li-ion battery

Transition metal oxides with high capacity are considered a promising electrode material for lithium-ion batteries (LIBs). Nevertheless, the huge volume expansion and poor conductivity severely hamper their practical application. In this work, a carbon riveting method is reported to address the above issues by designing multilayered N-doped carbon (N-carbon) enveloped Fe₃O₄/graphene nanosheets. When evaluated as a negative electrode, the N-carbon/Fe₃O₄/graphene nanocomposites demonstrate greatly enhanced electrochemical properties compared with Fe₃O₄/graphene. The N-carbon/Fe₃O₄/graphene presents a superior reversible capacity (807 mAh/g) over Fe₃O₄/graphene (540 mAh/g). Furthermore, it affords a considerable capacity of 550 mAh/g at 1 A/g over 700 cycles, indicating superb cycling stability. The structure-property correlation studies reveal that the carbon riveting layer is essential for enhancing the lithium diffusion kinetics. The good electrochemical properties and effective structure design make the carbon riveting strategy quite general and reliable to manipulate high performance electrodes for future LIBs.     

Well-designed hollow and porous Co3O4 microspheres used as an anode for Li-ion battery

Journal of Solid State Electrochemistry - Hollow and porous structures grant fantastic physicochemical properties and widespread application in electrochemical energy storage. Here, hollow/porous...     

A novel sandwiched membrane as polymer electrolyte for lithium ion battery

A novel kind of sandwiched polymer membrane was prepared by coating three layers of poly(vinyl difluoride) (PVDF), poly(methyl methacrylate) (PMMA) and PVDF, separately. Its characteristics were investigated by scanning electron microscopy, FT-IR, X-ray diffraction, and differential thermal analysis. It consists of two phases. The outer PVDF layers are porous, and the inner PMMA layer is solid. Since the PMMA has a good compatibility with the carbonate-based liquid electrolyte, the membrane can easily absorb the electrolyte to form a gelled polymer electrolyte (GPE). As a result, the evaporation peak of the liquid electrolyte is increased to 160 °C. Due to very low evaporation of the liquid electrolyte, LiCoO₂ shows good cycling behavior in the range of 4.4–3.0 V when this GPE is used as the separator and polymer electrolyte, and lithium as the counter and reference electrode. This unique sandwiched membrane is promising for application in scale-up lithium ion batteries with high safety and high energy density.     

Using paramagnetic particles as repulsive templates for the preparation of membranes of controlled porosity

Using mixtures of repulsive superparamagnetic polystyrene particles and a photopolymerizable organic liquid (trimethylolpropane trimethacrylate) that are applied to a water surface, it is possible to prepare porous membranes with controlled porosity. The particles were polarized by applying a magnetic field H perpendicular to the interface and spread out over the interface making use of the induced repulsive magnetic dipole interactions. As a consequence, the organic liquid in which the particles were embedded covered the water surface uniformly. Subsequent photo cross linking of the organic liquid and dissolution of the embedded particles gave rise to membranes whose porosities were controlled mainly by the chosen areas per particle. The spatial distribution of the pores and the deviation from a crystalline arrangement were characterized in terms of the 2D pair-correlation function and the mean nearest-neighbor interpore distance.