Co3O4 Hollow Nanoparticles Embedded in Mesoporous Walls of Carbon Nanoboxes for Efficient Lithium Storage

Confining nanostructured electrode materials in porous carbon represents an effective strategy for improving the electrochemical performance of lithium-ion batteries. Herein, we report the design and synthesis of hybrid hollow nanostructures composed of highly dispersed Co₃O₄ hollow nanoparticles (sub-20 nm) embedded in the mesoporous walls of carbon nanoboxes (denoted as H-Co₃O₄@MCNBs) as an anode material for lithium-ion batteries. The facile metal–organic framework (MOF)-engaged strategy for the synthesis of H-Co₃O₄@MCNBs involves chemical etching-coordination and subsequent two-step annealing treatments. Owing to the unique structural merits including more active interfacial sites, effectively alleviated volume variation, good and stable electrical contact, and easy access of Li⁺ ions, the H-Co₃O₄@MCNBs exhibit excellent lithium-storage performance in terms of high specific capacity, excellent rate capability, and cycling stability.     

Copper-linked 1T MoS2/Cu2O Heterostructure for Efficient Photocatalytic Hydrogen Evolution

Metallic 1T phase molybdenum disulfide(1T MoS₂) is an excellent catalyst due to the abundant active sites and good conductivity. However, complex synthesis and unstable nature of 1T MoS₂ still limit its practical application. Herein, we propose a simple method to trigger the phase transition of MoS₂. This phase transition is first predicted by density functional theory(DFT) calculations and then confirmed by Raman spectroscopy and high-resolution transmission electron microscopy(HRTEM). 1T MoS₂/Cu₂O heterostructure catalyst is then developed, showing enhanced photocatalytic hydrogen evolution.     

Harvesting Solar Light with Crystalline Carbon Nitrides for Efficient Photocatalytic Hydrogen Evolution

Described herein is the photocatalytic hydrogen evolution using crystalline carbon nitrides (CNs) obtained by supramolecular aggregation followed by ionic melt polycondensation (IMP) using melamine and 2,4,6‐triaminopyrimidine as a dopant. The solid state NMR spectrum of ¹⁵N‐enriched CN confirms the triazine as a building unit. Controlling the amount and arrangements of dopants in the CN structure can dramatically enhance the photocatalytic performance for H₂ evolution. The polytriazine imide (PTI) exhibits the apparent quantum efficiency (AQE) of 15 % at 400 nm. This method successfully enables a substantial amount of visible light to be harvested for H₂ evolution, and provides a promising route for the rational design of a variety of highly active crystalline CN photocatalysts.     

Self-Assembled Two-Dimensional NiO/CeO2 Heterostructure Rich in Oxygen Vacancies as Efficient Bifunctional Electrocatalyst for Alkaline Hydrogen Evolution and Oxygen Evolution

The development of high-efficiency bifunctional electrocatalysts toward the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in alkaline surroundings is essential and challenging for the large-scale generation of clean hydrogen. Herein, a novel self-assembled two-dimensional (2 D) NiO/CeO₂ heterostructure (HS) consisting of NiO and CeO₂ nanocrystals is prepared through a facile two-step approach, and utilized as an enhanced bifunctional electrocatalyst for the HER and OER under alkaline conditions. It is concluded that this 2 D NiO/CeO₂ HS, rich in oxygen vacancies, demonstrates attractive electrocatalytic properties for both the HER and OER in 1 m KOH, including low onset overpotential (η₁), η₁₀ and Tafel slope, excellent durability, as well as large active surface area. Therefore, the self-assembled 2 D NiO/CeO₂ HS is believed to be an efficient bifunctional electrocatalyst toward the HER and OER.     

Bifunctional Electrocatalyst with 0D/2D Heterostructure for Highly Efficient Hydrogen and Oxygen Generation

A novel MoS₂ quantum dots/CoSe₂ nanosheet (MoS₂ QDs/CoSe₂) hybrid with 0D/2D heterostructure has been developed. The CoSe₂ nanosheets (NSs) enable an excellent oxygen evolution reaction (OER) activity with increasing vacancy configuration on one hand, while the MoS₂ QDs serve as an eminent hydrogen evolution reaction (HER) catalyst on the other. By integrating MoS₂ QDs and CoSe₂ NSs, the hybrid exhibits excellent electrocatalytic performances in HER and OER. The unique 0D/2D hetero‐interface increases the exposed active sites and facilitates electron transfer, thereby boosting the electrocatalytic activity. Relatively low overpotentials of 82 mV and 280 mV are required to drive the current density of 10 mA/cm² for HER and OER, with corresponding Tafel slopes of 69 and 75 mV/dec, respectively. As such, this work provides an efficient yet simple approach to construct bifunctional electrocatalysts with enhanced activity and stability.     

Fe/Fe3C Nanoparticles Encapsulated in N-Doped Hollow Carbon Spheres as Efficient Electrocatalysts for the Oxygen Reduction Reaction over a Wide pH Range

Nonprecious-metal-based electrocatalysts with low cost, high activity, and stability are considered as one of the most promising alternatives to Pt-based catalysts for the oxygen reduction reaction (ORR). Herein, an economical and easy-to-fabricate catalyst is developed, that is, Fe/Fe₃C embedded in N-doped hollow carbon spheres (Fe/Fe₃C/NHCS), which gave the half-wave potential of 0.84 V in 0.1 m KOH, similar to the commercial Pt/C catalyst. Surprisingly, the favorable ORR performance of the as-prepared catalyst was obtained in both acidic and neutral conditions with almost a four-electron pathway and low H₂O₂ yield, which desirable the development of the proton exchange membrane (PEM) and microbial electrolysis cell (MEC) technology. Additionally, the obtained catalyst demonstrated better long-term stability and high methanol tolerance over a wide range of pH. These features could be mainly attributed to the synergistic effect between Fe/Fe₃C and Fe-N_x sites, the hollow structure with mesopores, and the well-dispersed Fe/Fe₃C nanoparticles owing to the existence of the abundant hydrophilic groups within the HCS precursor. As such, designing an efficient and cheap ORR catalyst that can operate at alkaline, acidic, and neutral solutions is highly desirable, yet challenging.     

Carbon Dots Integrated NiCo2O4 Hierarchical Nanoneedle Arrays Supported on Ni Foam as Efficient and Stable Electrode for Hydrogen and Oxygen Evolution Reactions

The production of hydrogen and oxygen via water electrolysis has become a sustainable and encouraging pathway for the establishment of new energy sources. Herein, we report the successful growth of hierarchical NiCo₂O₄‐carbon dots (CDs) nanoneedle arrays supported on nickel foam through a simple and environmentally benign hydrothermal self‐assembly technique. The designed material acts as a binder free electrode and shows bifunctional electrocatalytic activity for both hydrogen evolution reaction (HER) as well as oxygen evolution reaction (OER) in alkaline medium. An electrocatalyst sample with an optimal loading of CDs (25 mg) requires a low overpotential of 146 mV to achieve a current density of 10 mA/cm² for the HER in an alkaline medium, whereas it requires an overpotential of 390 mV to achieve a current density of 50 mA/cm² for the OER in the same alkaline medium. The excellent electrocatalytic activities of the sample with loading of CD can be ascribed due to the presence of large number of exposed active sites offered by CD/NiCo₂O₄ and the enhanced electron transfer processes occurring as a result of hierarchical structure composed of three‐dimensional nickel foam and the NiCo₂O₄?CDs nanoneedle arrays. Thus, the synthesis method introduced in this present work is a facile and cost‐effective approach for the construction of bifunctional electrocatalysts with high reactivity and excellent durability.     

An Efficient and Stable MoS2/Zn0.5Cd0.5S Nanocatalyst for Photocatalytic Hydrogen Evolution

Photocatalytic hydrogen evolution by water splitting is highly important for the application of hydrogen energy and the replacement of fossil fuel by solar energy, which needs the development of efficient catalysts with long-term catalytic stability under light irradiation in aqueous solution. Herein, Zn_0.5Cd_0.5S solid solution was synthesized by a metal–organic framework-templated strategy and then loaded with MoS₂ by a hydrothermal method to fabricate a MoS₂/Zn_0.5Cd_0.5S heterojunction for photocatalytic hydrogen evolution. The composition of MoS₂/Zn_0.5Cd_0.5S was fine-tuned to obtain the optimized 5 wt % MoS₂/Zn_0.5Cd_0.5S heterojunction, which showed a superior hydrogen evolution rate of 23.80 mmol h⁻¹ g⁻¹ and steady photocatalytic stability over 25 h. The photocatalytic performance is due to the appropriate composition and the formation of an intimate interface between MoS₂ and Zn_0.5Cd_0.5S, which endows the photocatalyst with high light-harvesting ability and effective separation of photogenerated carriers.     

Dimethylammonium Cation-Induced 1D/3D Heterostructure for Efficient and Stable Perovskite Solar Cells

Mixed-dimensional perovskite engineering has been demonstrated as a simple and useful approach to achieving highly efficient and more-durable perovskite solar cells (PSCs), which have attracted increasing research interests worldwide. In this work, 1D/3D mixed-dimensional perovskite has been successfully obtained by introducing DMAI via a two-step deposition method. The additive DMA⁺ can facilitate the crystalline growth and form 1D DMAPbI₃ at grain boundaries of 3D perovskite, leading to improved morphology, longer charge carrier lifetime, and remarkably reduced bulk trap density for perovskite films. Meanwhile, the presence of low-dimension perovskite is able to prevent the intrusion of moisture, resulting in enhanced long-term stability. As a result, the PSCs incorporated with 1D DMAPbI₃ exhibited a first-class power conversion efficiency (PCE) of 21.43% and maintained 85% of their initial efficiency after storage under ambient conditions with ~45% RH for 1000 h.     

Amorphous Fe Nanoclusters Embedded inside Balloon-Like N-Doped Hollow Carbon for Efficient Electrocatalytic Oxygen Reduction

Rational designs of electrocatalytic active sites and architectures are of great importance to develop cost-efficient non-noble metal electrocatalysts towards efficient oxygen reduction reaction (ORR) for high-performance energy conversion and storage devices. In this work, active amorphous Fe-based nanoclusters (Fe NC) are elaborately embedded at the inner surface of balloon-like N-doped hollow carbon (Fe NC/C_h sphere) as an efficient ORR electrocatalyst with an ultrathin wall of about 10 nm. When evaluated for electrochemical performance, Fe NC/C_h sphere exhibits decent ORR activity with a diffusion-limited current density of ~5.0 mA/cm² and a half-wave potential of ~0.81 V in alkaline solution, which is comparable with commercial Pt/C and superior to Fe nanoparticles supported on carbon sheet (Fe NP/C sheet) counterpart. The electrochemical analyses combined with electronic structure characterizations reveal that robust Fe-N interactions in amorphous Fe nanoclusters are helpful for the adsorption of surface oxygen-relative species, and the strong support effect of N-doped hollow carbon is benefitial for accelerating the interfacial electron transfer, which jointly contributes to improve ORR kinetics for Fe NC/C_h sphere.     

CoxP/Hollow Porous C3N4 as Highly Efficient Schottky Contact Photocatalyst for H2 Evolution from Water Splitting

Photocatalytic water splitting to obtain hydrogen energy can transform low-density solar to high density, new and clean energy in a clean way, which is one of the ideal ways to solve the energy crisis and environmental pollution. In this paper, The Co_xP/hollow porous C₃N₄ composite photocatalytic material was synthesized by simple methods. The photocatalytic hydrogen production rate of Co_xP/hollow porous C₃N₄ reaches 1602 μmol g⁻¹ h⁻¹, which is 151 times of that of pure C₃N₄. The reasons for the high photocatalytic H₂ evolution activity of Co_xP/hollow porous C₃N₄ could be summarized as follows: (1) the hollow and porous structure of C₃N₄ shows higher light capture efficiency, larger specific surface area and more surface active sites. (2) metalloid Co_xP loaded forms the Schottky contact with C₃N₄, which improves the photogenerated charges separation efficiency of C₃N₄, prolongs the photogenerated charges lifetime and improves the photocatalytic H₂ evolution activity of C₃N₄. (3) The higher conductivity of metalloid Co_xP and the lower overpotential of hydrogen production are other reasons for the higher activity of photocatalytic hydrogen production of Co_xP/hollow porous C₃N₄. This work provides an important role for the design of efficient, stable, and efficient construction of photocatalysts for solar energy conversion.     

Highly Dispersed Pt Nanoparticles Embedded in N-Doped Porous Carbon for Efficient Hydrogen Evolution

A novel and facile strategy is presented to synthesize highly dispersed Pt nanoparticles embedded in N-doped porous carbon (Pt@NPC) via carbonization of Zn-containing metal-organic frameworks and chemical replacement of Zn with Pt. The as-prepared Pt@NPC exhibits superior activity and durability towards hydrogen evolution reaction (HER) in comparison with commercial Pt/C catalyst. The excellent HER performance of Pt@NPC can be ascribed to the combined features of catalyst and support material, including high dispersion and ultrathin particle size of Pt, high surface area and nitrogen doping of carbon support, and the strong interaction between metal and support.     

氮掺杂石墨炭包覆的钴纳米催化剂作高效、高稳定性电催化制氢

电催化制氢是解决当前能源危机的重要手段之一。 研究高效稳定的非贵金属电催化剂是电催化制氢商业应用的重点。 本文通过直接高温热解双金属沸石咪唑骨架,制备了一种氮掺杂石墨炭(NC)包覆均匀分布的钴纳米颗粒电催化剂(V-Co@NC,这里V是vacancy缩写),前躯体中的Zn元素有效地防止钴纳米颗粒的聚集,并有助于生成均匀分布的钴纳米颗粒。 这种特殊的纳米结构可防止钴与电解液的直接接触,提升了其循环稳定性,同时,氮元素的掺杂提升了导电性,有利于电催化制氢性能的提升。 结果表明,所制备的V-Co@NC催化剂在酸性和碱性电解液中均具有良好的催化性能,且经过5000次循环测试后催化活性基本保持不变,具有良好的应用前景。为高活性和高选择性的电催化制氢催化剂的发展提供一种全新的途径。     

Silver Single Atom in Carbon Nitride Catalyst for Highly Efficient Photocatalytic Hydrogen Evolution

Single atom catalysts (SACs) with the maximized metal atom efficiency have sparked great attention. However, it is challenging to obtain SACs with high metal loading, high catalytic activity, and good stability. Herein, we demonstrate a new strategy to develop a highly active and stable Ag single atom in carbon nitride (Ag-N₂C₂/CN) catalyst with a unique coordination. The Ag atomic dispersion and Ag-N₂C₂ configuration have been identified by aberration-correction high-angle-annular-dark-field scanning transmission electron microscopy (AC-HAADF-STEM) and extended X-ray absorption. Experiments and DFT calculations further verify that Ag-N₂C₂ can reduce the H₂ evolution barrier, expand the light absorption range, and improve the charge transfer of CN. As a result, the Ag-N₂C₂/CN catalyst exhibits much better H₂ evolution activity than the N-coordinated Ag single atom in CN (Ag-N₄/CN), and is even superior to the Pt nanoparticle-loaded CN (Pt_NP/CN). This work provides a new idea for the design and synthesis of SACs with novel configurations and excellent catalytic activity and durability.     

Carbon Nanotube Supported Molybdenum Carbide as Robust Electrocatalyst for Efficient Hydrogen Evolution Reaction

Molybdenum carbide is considered to be one of the most competitive catalysts for hydrogen evolution reaction (HER) regarding its high catalytic activity and superior corrosion resistance. But the low electrical conductivity and poor interfacial contact with the current collector greatly inhibit its practical application capability. Herein, carbon nanotube (CNT) supported molybdenum carbide was assembled via electrostatic adsorption combined with complex bonding. The N-doped molybdenum carbide nanocrystals were uniformly anchored on the surfaces of amino CNTs, which depressed the agglomeration of nanoparticles while strengthening the migration of electrons. The optimized catalyst (250-800-2h) showed exceptional electrocatalytic performance towards HER under both acidic and alkaline conditions. Especially in 0.5 M H₂SO₄ solution, the 250-800-2h catalyst exhibited a low overpotential of 136 mV at a current density of 10 mA/cm² (η₁₀) with the Tafel slope of 49.9 mV dec⁻¹, and the overpotential only increased 8 mV after 20,000 cycles of stability test. The active corrosive experiment revealed that more exposure to high-activity γ-Mo₂N promoted the specific mass activity of Mo, thus, maintaining the catalytic durability of the catalyst.     

Hierarchical Nanoboxes Composed of Co9S8−MoS2 Nanosheets as Efficient Electrocatalysts for the Hydrogen Evolution Reaction

The development of hydrogen evolution catalysts based on nonprecious metals is essential for the practical application of water‐splitting devices. Herein, the synthesis of Co₉S₈?MoS₂ hierarchical nanoboxes (HNBs) as efficient catalysts for the hydrogen evolution reaction (HER) is reported. The surface of the hollow cubic structure was organized by CoMoS₄ nanosheets formed through the reaction of MoS₄^2? and Co²⁺ released from the cobalt zeolite imidazole framework (ZIF‐67) templates under reflux in a mixture of water/ethanol. The formation process for the CoMoS₄ HNB structures was characterized by TEM images recorded at various reaction temperatures. The amorphous CoMoS₄ HNBs were converted through sequential heat treatments into CoS_x?MoS₂ and Co₉S₈?MoS₂ HNBs. Owing to their unique chemical compositions and structural features, Co₉S₈?MoS₂ HNBs have a high specific surface area (124.6 m² g^?1) and superior electrocatalytic performances for the HER. The Co₉S₈?MoS₂ HNBs exhibit a low overpotential (η₁₀) of 106 mV, a low Tafel slope of 51.8 mV dec^?1, and long‐term stability in an acidic medium. The electrocatalytic activity of Co₉S₈?MoS₂ HNBs is superior to that of recently reported values, and these HNBs prove to be promising candidates for the HER.     

Graphitic Carbon Nitride/Nitrogen‐Rich Carbon Nanofibers: Highly Efficient Photocatalytic Hydrogen Evolution without Cocatalysts

An interconnected framework of mesoporous graphitic‐C₃N₄ nanofibers merged with in situ incorporated nitrogen‐rich carbon has been prepared. The unique composition and structure of the nanofibers as well as strong coupling between the components endow them with efficient light‐harvesting properties, improved charged separation, and a multidimensional electron transport path that enhance the performance of hydrogen production. The as‐obtained catalyst exhibits an extremely high hydrogen‐evolution rate of 16885 μmol h^?1 g^?1, and a remarkable apparent quantum efficiency of 14.3 % at 420 nm without any cocatalysts, which is much higher than most reported g‐C₃N₄‐based photocatalysts even in the presence of Pt‐based cocatalysts.     

A [001]-Oriented Hittorf's Phosphorus Nanorods/Polymeric Carbon Nitride Heterostructure for Boosting Wide-Spectrum-Responsive Photocatalytic Hydrogen Evolution from Pure Water

Red phosphorus is a promising photocatalyst with wide visible-light absorption up to 700 nm, but the fast charge recombination limits its photocatalytic hydrogen evolution reaction (HER) activity. Now, [001]-oriented Hittorf's phosphorus (HP) nanorods were successfully grown on polymeric carbon nitride (PCN) by a chemical vapor deposition strategy. Compared with the bare PCN and HP, the optimized PCN@HP hybrid exhibited a significantly enhanced photocatalytic activity, with HER rates reaching 33.2 and 17.5 μmol h⁻¹ from pure water under simulated solar light and visible light irradiation, respectively. It was theoretically and experimentally indicated that the strong electronic coupling between PCN and [001]-oriented HP nanorods gave rise to the enhanced visible light absorption and the greatly accelerated photoinduced electron–hole separation and transfer, which benefited the photocatalytic HER performance.     

高分散Co0.2Ni1.6Fe0.2P助催化剂改性P掺杂g-C3N4纳米片高效光催化析氢的研究

随着化石燃料使用的增加和温室气体排放量持续上升,20世纪以来气温上升得更快。开发环境友好型能源取代传统化石燃料是当务之急。氢能源作为一种清洁、高效的能源,被认为是最有希望取代传统化石燃料的能源。光催化水分解水产氢作为为一种环保型技术被认为是最有前景的氢能生产方法。提高光生电子-空穴对分离效率是构建高效光催化剂的关键。然而,利用高度分散的助催化剂构建高效、稳定的产氢光催化剂仍然是一个挑战。本文首次成功地采用一步原位高温磷化法制备了高度分散的非贵金属三金属过度金属磷化Co_0.2Ni_1.6Fe_0.2P助催化剂(PCNS-CoNiFeP)掺杂P的石墨相氮化碳纳米片(PCNS)。有趣的是,PCNS-CoNiFeP与传统氢氧前驱体磷化法制备的CoNiFeP相比,没有聚集性,分散性高。X射线衍射(XRD)、X射线光电子能谱(XPS)、元素映射图像和高分辨率透射电镜(HRTEM)结果表明,PCNS-CoNiFeP已成功合成。紫外-可见吸收光谱结果表明,PCNS-CoNiFeP在200–800 nm波长范围内较PCNS略有增加。光致发光光谱、电化学阻抗谱(EIS)和光电流分析结果表明,CoNiFeP助催化剂能有效促进光生电子-空穴对的分离,加速载流子的迁移。线性扫描伏安法(LSV)结果还表明,负载CoNiFeP助催化剂可大大降低CNS的过电位。结果表明,以三乙醇胺溶液为牺牲剂的PCNS-CoNiFeP最大产氢速率为1200 μmol·h^-1·g^-1,是纯CNS-Pt (320 μmol·h^-1·g^-1)的4倍。在420 nm处的表观量子效率为1.4%。PCNS-CoNiFeP在光催化反应中也表现出良好的稳定性。透射电镜结果表明,6–8 nm的CoNiFeP高度分散在PCNS表面。高度分散的CoNiFeP比聚集的CoNiFeP具有更好的电荷分离能力和更高的电催化析氢活性。由此可见,聚合的CoNiFeP-PCNs (300 μmol·h^-1·g^-1)的产氢速率远低于PCNS-CoNiFeP。此外,CNS的P掺杂可以改善其电导率和电荷传输。