层合板冲击损伤的PD率效应本构模型分析

从近场动力学(简称PD)理论的PMB材料模型出发,结合Kelvin-Voigt粘弹性固体模型,建立PD率效应本构模型。采用LAMMPS软件模拟了环氧树脂板、纤维增强复合材料单向层板和多向铺层层合板受冲击的情况。通过分析各板的冲击损伤,探索纤维对板的增强作用。同时,分析了不同冲击速度下层合板上下表面的损伤程度,初步探讨了从低速碰撞到高速冲击过程中复合材料层合板的破坏机理及规律。     

编织Kevlar/Epoxy复合材料层合板在冲击荷载下的动态响应

通过编织Kevlar/Epoxy复合材料层合板的平头弹冲击实验,分析了结构在不同冲量下的变形失效模式以及结构的抗冲击性能。实验表明复合板的变形失效模式主要表现为:(1)弹性变形;(2)复合板表面嵌入失效及整体塑性大变形;(3)背面纤维拉伸断裂及分层失效。基于实验研究,运用LS-DYNA 971有限元程序对铺层数不同的复合板在冲击载荷作用下的动态响应过程进行了数值模拟,模拟结果与实验吻合较好,子弹作用区域边缘处首先发生近似圆形的嵌入失效,而在板背面发生近似正方形的破坏区域;计算中重点分析了铺层数对结构动力响应的影响,在一定冲量范围内,通过对铺层数的优化,能够有效地减小后面板挠度,提高结构的能量吸收效率,增强结构的抗冲击性能。     

Dynamic modelling and active vibration control of a submerged rectangular plate equipped with piezoelectric sensors and actuators

The active vibration control of a rectangular plate either partially or fully submerged in a fluid was investigated. Piezoelectric sensors and actuators were bonded to the plate, and the assumed mode method was used to derive a dynamic model for the submerged plate. The properties of the piezoelectric actuators and sensors, as well as their coupling to the structure, were used to derive the corresponding equations of their behaviour. The fluid effect was modelled according to the added virtual mass obtained by solving the Laplace equation. The natural vibration characteristics of the plate both in air and in water were obtained theoretically and were found to be consistent with the experimental results, and the changes in the natural frequencies resulting from submersion in fluid can be accurately predicted. A multi-input, multi-output positive position feedback controller was designed by taking the natural vibration characteristics into account and was then implemented by using a digital controller. The experimental results show that piezoelectric sensors and actuators along with the control algorithm can effectively suppress the vibration of a rectangular plate both in air and submerged in a fluid.     

双层夹芯复合材料结构横向冲击响应实验

采用玻璃纤维增强环氧树脂复合材料层合板作为内、外面板,以PVC泡沫作为芯材,构造了双层夹芯复合材料结构。采用落锤冲击实验,得到了冲击过程的撞击力历史;研究了在不同的冲击能量下,双层夹芯结构的冲击响应及内面板位置对双层夹芯结构冲击响应的影响。实验结果表明,内面板的引入及内面板的位置显著影响双层夹芯结构的撞击力历史,根据该撞击力历史可以优化设计出抗冲击性能优异的新型双层夹芯复合材料结构。     

螺栓松动边界下纤维增强复合薄板的振动测试方法

提出了基于预埋压力传感器的量化测试方法,研究了螺栓松动边界对纤维增强复合薄板振动特性的影响。首先,自主设计并开发了带有预埋压力传感器的螺栓松动边界下复合薄板的振动测试系统,并详细介绍了系统各个部件的组成和功能;然后,归纳出一套合理、规范的松动边界下复合薄板的振动测试流程,并对HF10碳纤维/树脂复合薄板进行了实际测试。结果表明:随着螺栓松动程度的不断增加,复合薄板的固有频率逐渐降低,模态振型的节线位置也发生了不同程度的变化,但其阻尼结果呈现先增大后减小的趋势;而共振和非共振响应呈现先减小后增大的趋势。     

复合材料层合板低速冲击响应和损伤分析

通过在有限元软件Abaqus/Explicit中编写用户材料子程序VUMAT,建立了一种基于能量演化的复合材料低速冲击渐进损伤模型．该模型以三维Hashin准则来预测层内损伤的起始,以一种简化的损伤变量来模拟层内损伤的演化,将具有双线性牵引-分离本构的零厚度界面单元插入层间来模拟分层损伤．采用该模型对14.7 J冲击能量下的纤维增强复合材料低速冲击过程进行了仿真分析,计算得到的冲击力-时间曲线、能量-时间曲线和损伤分布与试验结果吻合较好．根据数值模拟结果,分析了纤维、基体和分层损伤的扩展规律,为低速冲击下的复合材料结构设计提供了理论依据．     

复合材料冲击损伤及冲击后压缩强度的等效实验方法

简要论述了复合材料低速冲击及冲击后压缩的研究情况,比较了几种不同的冲击后的压缩实验方法,选取一种小尺寸试件方法,对复合材料低速冲击后的压缩行为进行研究,并将结果与有关文献进行了比较,实验结果与文献结果具有一致的变化规律。研究结果显示,对于材料研究,该方法可用来表征复合材料冲击后的压缩特性。使用该方法可以大大节省实验费用及周期。     

Physical relations for problems of impact loading and unsteady deformation of composite structures

A problem of determining elastic and viscous characteristics of composite materials, necessary and sufficient for choosing physical relations in solving problems of impact loading with low impact velocities (up to 200 m/sec) and unsteady deformation in the range of strain rates within 10 ² sec⁻¹ for multilayer beams, plates, and shells, is considered. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 50, No. 1, pp. 187–196, January–February, 2009.     

Structural mode filtering of a discrete-parameter system using PVDF sensors

This study presents a modal filtering approach to separate the structural modes of a high-rise structure using shaped film sensors. A building-like model structure is constructed to realize the proposed model filtering approach. Since it is difficult to define a modal shape function for discrete-parameter structures, analytical, numerical, and experimental approaches are discussed to determine the shape of the sensor. In experiment, the first structural mode of a high-rise structure is successfully filtered and the robustness of the sensor output against parameter uncertainty is tested Published in Prikladnaya Mekhanika, Vol. 42, No. 2, pp. 136–142, February 2006.     

冲击作用下复合材料叠层板层间开裂演化模型

采用双线性特性破坏模型研究了复合材料叠层板层间开裂裂纹的演化, 通过引入弹性/剪切模量的损伤参数, 推导出损伤参数与应变之间的微分方程, 并得到裂纹耗散功率与损伤参数变化率之间的关系. 计算不同初始冲击速度下复合材料叠层板某界面上应变、应变率响应以及损伤参数的演化, 即可得到该界面发生层间开裂的情形及其对剪切模量的影响.通过检查界面各点处的损伤参数是否发生改变, 预测了冲击完成之后复合材料叠层板第1, 2层之间发生层间开裂区域的大小与位置; 该预测结果与实验数据及其他破坏准则计算结果基本相符. 计算结果表明, 在冲击过程中当界面上任意点处的剪应力超过剪切强度后, 该点附近的剪切模量开始发生衰减, 衰减大小随铁球初始冲击速度的增大而增大, 并从靠近冲击中心的位置逐渐向周围递减. 在四边简支边界条件下, 复合材料叠层板的层间开裂区域同样最先出现在界面中靠近冲击点的位置, 区域面积随初始冲击速度的增大不断扩大. 当初始冲击速度足够高时, 第1, 2层界面的两条对称轴上开始出现多个独立的开裂区域.      

低速撞击下正交型纤维增强复合材料层板的脱层研究

用不饱和聚脂预浸渍玻璃纤维带制作了几种正交型铺层序列的层板梁试件,并对其在固支条件下进行了横向冲击实验。用嵌入式加速度传感器得到了载荷历史,通过高速摄影机和显微摄像系统从层板侧面观察了脱层现象。根据最大剪应力准则,通过对层板内部剪应力的分布以及不同铺层间三种不同剪切破坏强度的近似分析,解释了首次脱层具体位置和二次脱层现象。试验和分析表明,脱层失稳所对应的脱层阈值载荷与试件的铺层结构有关。但是,对不同铺层结构的试件,发生脱层的0°/90°界面具有相同的细观剪切强度。因此,用细观界面剪切强度来分析和预言试件的脱层失稳更具有一般性。     

复合材料层合板冲击损伤近场动力学模型与分析

近场动力学(简称PD)理论通过域内积分建立物质基本运动方程。不同于传统理论中通过微分建立运动方程的方法,该理论对场函数没有连续性的要求,因而适合求解各类不连续问题。基于此,本文建立了正交各向异性单层板PD理论模型,进而引入单层板层间作用,发展了正交各向异性层合板PD模型及其损伤模型,并模拟了各向同性与各向异性层合板冲击损伤;通过对比分析,对模型的有效性进行了验证。     

Nonlinear progressive damage model for composite laminates used for low-velocity impact

In order to effectively describe the progressively intralaminar and interlam- inar damage for composite laminates, a three dimensional progressive damage model for composite laminates to be used for low-velocity impact is presented. Being applied to three-dimensional （3D） solid elements and cohesive elements, the nonlinear damage model can be used to analyze the dynamic performance of composite structure and its failure be- havior. For the intralaminar damage, as a function of the energy release rate, the damage model in an exponential function can describe progressive development of the damage. For the interlaminar damage, the damage evolution is described by the framework of the continuum mechanics through cohesive elements. Coding the user subroutine VUMAT of the finite element software ABAQUS/Explicit, the model is applied to an example, i.e., carbon fiber reinforced epoxy composite laminates under low-velocity impact. It is shown that the prediction of damage and deformation agrees well with the experimental results.     

复合材料层合板的数值分析与实验

本文用云纹干涉法和逐层分析有限元法研究了Gr/PEEK[0/45－45/90]2S复合材抖层合板的变化特征,在层与层交接处,特别是0°与45°和一45°与90°层交接处,位移存在较明显的变化,说明这两种层接处有比较大的层间应力,是脱层的易发处.计算与实验结果都证实了这种变形特征．     

冲击消振器的概周期碰振运动分析

建立了冲击消振器对称周期运动的Poincar啨映射方程 ,讨论了对称周期运动的稳定性与局部分岔。通过数值仿真研究了冲击消振器在非共振、弱共振和强共振条件下的概周期碰振运动及其向混沌的转迁过程。     

功能梯度石墨烯增强复合材料板的自由振动

基于高阶函数剪切变形板理论,研究了可移动简支边界条件下功能梯度石墨烯增强复合材料板的自由振动。利用修正的Halpin-Tsai模型估计了复合材料的等效杨氏模量。基于Hamilton原理构建其偏微分方程。通过Navier方法计算得到了板的量纲为一的频率,并与已有成果进行了比较,验证了本文计算模型的优越性。数值计算结果表明:功能梯度石墨烯增强复合材料板的量纲为一的基频受石墨烯小块的分布模式影响很大,随着石墨烯含量的增加而单调增加;固定石墨烯小块的厚度和长宽比,量纲为一的基频随着长厚比的增加而单调增加。     

DAMAGE PROGRESSIVE MODEL OF COMPRESSION OF COMPOSITE LAMINATES AFTER LOW VELOCITY IMPACT

IntroductionCompressivepropertiesofcompositelaminatesafterlowvelocityimpactareoneofthemostseriouscircumstanceswhichmustbetakenintoaccountindamagetolerancedesignofcompositestructures[1].Impactdamagegenerallymanifestsintheformsofdelaminations,matrixcracksandfibrefracture[2 ,3].Sofaralotofresearcheshavebeentakeninlowvelocityimpactbehaviorofcompositelaminatesandtheirpost_impactcompressiveproperties.Compressivefailuremechanismsofcompositelaminatesafterlowvelocityimpacthavenotbeenknownclearly .Ther…     

破片冲击作用下舰船复合材料结构损伤的近场动力学模拟

基于近场动力学方法,综合分析了破片的速度、层合板的铺层方式、加筋板的筋条尺寸和破片相对筋条的冲击位置对结构损伤模式和破片剩余速度的影响。结果显示：高速破片冲击作用下,层合板会发生侵彻和穿透现象,层合板的损伤模式以基体损伤为主,且随着破片冲击速度的增大,板上下表面的损伤区域呈现出一种先增大后减小的趋势;高速破片冲击作用下,层合的板损伤扩展方向和纤维铺设方向有关,对于纤维铺层方向相同的层合板,其上下表面的损伤扩展方向一般与纤维方向相同;加筋板通过增加少量质量可以获得比层合板更好的抗破片冲击性能,且加筋板的筋条尺寸和破片相对筋条的冲击位置对加筋板的损伤具有明显影响。

     

Three dimensional elasticity solution for vibration problem of thick plate

I.Introduction'TheclassicalplatetheoryofvibrationisbasedontheKirchhoffhypotllcsis.andtheeffectoftransversesheardeformationandrotatoryinertiaareneglected.111[lltllcfreevibratiollfrequenciesofthinplates,allkindsofboundaryconditionshavebeensolved.Fortheanalysisofthevibrationalproblemsofthickplate,thetheoryofReissuer,MindlinandHenkyisused.Accordingtothedegreesoftheeffectsoftransverseshearstress,transversenormalstressandrotatoryinertia,somedynamicproblemsinEngineeringhavebeensolvedl:l.Regardless…     

Simultaneous measurements of disk vibration and pressure fluctuation in turbulent flow developing in a model hard disk drive

The complex flow features inside hard disk drive models are investigated in an axisymmetric and a semi-open shroud configurations. For the axisymmetric case, we have employed both experimental and computational approaches. The experiment focuses on both flow dynamics and the disk vibration, where measurements of the fluctuating pressure and velocity are undertaken at some representative points. The correlation between the disk vibration and the fluctuating pressure in the turbulent flow between disks is evident from the spectral analysis. The experimentally observed fluctuating pressure and velocity are partly due to the disk vibration and its contribution could be estimated by comparing the experiment with the results of a large eddy simulation. For the semi-open shroud case, although the characteristic peaks attributable to the large-scale vortical structure are still observed in the power spectra, the pressure fluctuation and the disk vibration are suppressed when the arm is inserted.