Phase formation in the ZrO(NO<Subscript>3</Subscript>)<Subscript>2</Subscript>-H<Subscript>3</Subscript>PO<Subscript>4</Subscript>-CsF-H<Subscript>2</Subscript>O system at low concentration of the phosphorus-containing component

The ZrO(NO₃)₂-H₃PO₄-CsF-H₂O system was studied at 20°C along the section at a molar ratio of PO₄³⁻/Zr = 0.5 (which is of the greatest interest in the context of phase formation) at ZrO₂ concentrations in the initial solutions of 2–14 wt % and molar ratios of CsF: Zr = 1−6. The following compounds were isolated for the first time: crystalline fluorophosphates CsZrF₂PO₄ · H₂O, amorphous oxofluorophosphate Cs₂Zr₃O₂F₄(PO₄)₂ · 3H₂O, and amorphous oxofluorophosphate nitrate CsZr₃O_1.25F₄(PO₄)₂(NO₃)_0.5 · 4.5H₂O. The compound Cs₃Zr₃O_1.5F₆(PO₄)₂ · 3H₂O was also isolated, which forms in a crystalline or glassy form, depending on conditions. The formation of the following new compounds was established: Cs₂Zr₃O_1.5F₅(PO₄)₂ · 2H₂O, Cs₂Zr₃F₂(PO₄)₄ · 4.5H₂O, and Zr₃O₄(PO₄)_1.33 · 6H₂O, which crystallize only in a mixture with known phases. All the compounds were studied by X-ray powder diffraction, crystal-optical, thermal, and IR spectroscopic analyses.     

Interactions in the system Mn(NO<Subscript>3</Subscript>)<Subscript>2</Subscript>-HCONH<Subscript>2</Subscript>-H<Subscript>2</Subscript>O

Solubilities and solid phases in the system Mn(NO₃)₂-HCONH₂-H₂O were studied by an isothermal method at 25°C. The congruently saturating compound Mn(NO₃)₂ · 2HCONH₂ · 2H₂O was isolated; the concentration conditions for its crystallization in the system were determined. The solid phases of the system were characterized by physicochemical methods (X-ray powder diffraction, differential thermal analysis, IR spectroscopy, and crystal-optical analysis).     

Hydrothermal synthesis and thermodynamic properties of 2CaO·3B<Subscript>2</Subscript>O<Subscript>3</Subscript>·H<Subscript>2</Subscript>O

2CaO·3B₂O₃·H₂O which has non-linear optical (NLO) property was synthesized under hydrothermal condition and identified by XRD, FTIR and TG as well as by chemical analysis. The molar enthalpy of solution of 2CaO·3B₂O₃·H₂O in HCl·54.572H₂O was determined. From a combination of this result with measured enthalpies of solution of H₃BO₃ in HCl·54.501H₂O and of CaO in (HCl+H₃BO₃) solution, together with the standard molar enthalpies of formation of CaO(s), H₃BO₃(s), and H₂O(l), the standard molar enthalpy of formation of −(5733.7±5.2) kJ mol⁻¹ of 2CaO·3B₂O₃·H₂O was obtained. Thermodynamic properties of this compound were also calculated by a group contribution method.     

Phase composition,formation parameters,and morphology of precipitates in the LiVO<Subscript>4</Subscript>-VOSO<Subscript>4</Subscript>-H<Subscript>2</Subscript>O system

The phase and chemical compositions of the precipitates formed in the LiVO₃-VOSO₄-H₂O system at initial pH within 1 ≤ pH ≤ 4 and 90°C were studied. The following phases were prepared: an α phase Li_1.4(VO)_1.3[H₂V₁₀O₂₈] · nH₂O and a β phase Li_{0.6 ? x} H_{1.4 + x} [V₁₂O_{31 ? y/2}] · nH₂O (0 ≤ x ≤ 0.5, 1.3 ≤ y ≤ 2.0) with a layered structure. Li_0.4V₂O₅ · H₂O nanorods with the interlayer distance 10.30 ± 0.08 Å were synthesized at 180°C in an autoclave. The morphology, IR spectra, and main formation processes for these polyvanadates were studied.     

Synthesis,structure, and electric properties of oxygen-deficient perovskites Ba<Subscript>3</Subscript>In<Subscript>2</Subscript>ZrO<Subscript>8</Subscript> and Ba<Subscript>4</Subscript>In<Subscript>2</Subscript>Zr<Subscript>2</Subscript>O<Subscript>11</Subscript>

Perovskite phases Ba₃In₂ZrO₈ and Ba₄In₂Zr₂O₁₁ with the nominal concentration of structural oxygen vacancies 1/9 and 1/12, respectively, were synthesized by solid-phase and solution methods. X-ray diffraction showed cubic symmetry of both phases with the unit cell parameter a = 0.4193(2) and 0.4204(3) nm, respectively. The absence of superstructural lines resulted in the conclusion on statistical arrangement of oxygen vacancies. Thermogravimetry and mass spectrometry proved that both phases can reversibly absorb water from gas phase (pH₂O = 2 × 10⁻² atm) with observed correlation between the concentration of oxygen vacancies and amount of absorbed water. The total water amount was up to 0.9 mol per formula unit or, if recalculated for perovskite unit ABO₃, 0.3 and 0.23 mol H₂O, respectively. The temperature curves of coductivity in the atmosphere with various partial water vapor pressures (pH₂O = 3 × 10⁻⁵ and 2 × 10⁻² atm) showed significantly higher conductivity and lower activation energy (0.52 eV) in humid atmosphere due to proton transfer. The proton conductivity is up to 5 × 10⁻⁴ Ohm⁻¹ cm⁻¹ at 300°C for Ba₃In₂ZrO₈ specimen. IR spectrometry showed that protons in the structure exist primarily in OH-groups.     

Synthesis characterization and catalytic evaluation of Ni/ZrO<Subscript>2</Subscript>/SiO<Subscript>2</Subscript> aerogels catalysts

The Ni/ZrO₂/SiO₂ aerogels catalysts were synthesized via three different routes: (i) impregnation ZrO₂–SiO₂ composite aerogels with a aqueous solution of Ni(NO₃)₂, (ii) impregnation SiO₂ aerogels with a mixed aqueous solution of Ni(NO₃)₂ and ZrO(NO₃)₂ · 2H₂O, (iii) one-pot sol–gel procedure from precursors Ni(NO₃)₂/ZrO(NO₃)₂ · 2H₂O/Si(OC₂H₅)₄. These catalysts were characterized by X-ray diffraction (XRD), temperature-programmed reduction (TPR), ammonia temperature-programmed desorption (NH₃-TPD), N₂ adsorption–desorption isotherms and Fourier transform infrared (FT-IR). The Liquid-phase hydrogenation of maleic anhydride (MA) was performed over these catalysts. The results revealed that the different preparation routes result in a difference between the obtained samples, concerning the crystal structure and composition, surface acidity, mixed level of each component, texture, and catalytic selectivity.     

Preparation and electrochemical performance of nano-structured Li<Subscript>2</Subscript>Mn<Subscript>4</Subscript>O<Subscript>9</Subscript> for supercapacitor

Nano-structured spinel Li₂Mn₄O₉ powder was prepared via a combustion method with hydrated lithium acetate (LiAc·2H₂O), manganese acetate (MnAc₂·4H₂O), and oxalic acid (C₂H₂O₄·2H₂O) as raw materials, followed by calcination of the precursor at 300 °C. The sample was characterized by X-ray diffraction, scanning electron microscope, and energy-dispersive X-ray spectroscopy techniques. Electrochemical performance of the nano-Li₂Mn₄O₉ material was studied using cyclic voltammetry, ac impedance, and galvanostatic charge/discharge methods in 2 mol L⁻¹ LiNO₃ aqueous electrolyte. The results indicated that the nano-Li₂Mn₄O₉ material exhibited excellent electrochemical performance in terms of specific capacity, cycle life, and charge/discharge stability, as evidenced by the charge/discharge results. For example, specific capacitance of the single Li₂Mn₄O₉ electrode reached 407 F g⁻¹ at the scan rates of 5 mV s⁻¹. The capacitor, which is composed of activated carbon negative electrode and Li₂Mn₄O₉ positive electrode, also exhibits an excellent cycling performance in potential range of 0–1.6 V and keeps over 98% of the maximum capacitance even after 4,000 cycles.     

Comparing the electrochemical properties of pure phase Zn<Subscript>2</Subscript>SnO<Subscript>4</Subscript> and composite Zn<Subscript>2</Subscript>SnO<Subscript>4</Subscript>/C

Compound Zn₂SnO₄ was synthesized by a hydrothermal method in which SnCl₄ · 5H₂O, ZnCl₂ and N₂H₄ · H₂O were used as reactants. Composite Zn₂SnO₄/C was then synthesized through a carbothermic reduction process using the as-prepared Zn₂SnO₄ and glucose as reactants. Comparing to the pure Zn₂SnO₄, some improved electrochemical properties were obtained for composite Zn₂SnO₄/C. When doped with 15% glucose, the composite Zn₂SnO₄/C showed the best electrochemical performance. Its first discharge capacity was about 1500 mA h g⁻¹, with a capacity retain of 500 mA h g⁻¹ in the 40th cycle at a constant current density of 100 mA/g in the voltage range of 0.05–3.0 V. There were also some differences displayed in their cyclic voltammogram.     

Influence of heat treatment on the phase transition of ZrMo<Subscript>2</Subscript>O<Subscript>8</Subscript> and photocatalytic activity

ZrMo₂O₇(OH)₂·2H₂O was obtained from ZrOCl₂·2H₂O and Na₂MoO₄·2H₂O by a coprecipitation method. The phase and structural changes occurred during the heat-treatment of ZrMo₂O₇(OH)₂·2H₂O were investigated by XRD, IR and XPS analysis. The sequence of phase transformation can be divided into three stages: (1) transformation of ZrMo₂O₇(OH)₂·2H₂O to orthorhombic LT-ZrMo₂O₈ up to 300°C; (2) obtaining of mixture of both polymorphs of ZrMo₂O₈: cubic and trigonal at 400°C; (3) conversion to single trigonal (α) ZrMo₂O₈ above 450°C. The microstructure of the obtained trigonal (α) ZrMo₂O₈ was observed by scanning electron microscopy (SEM). The particle sizes were below 0.5 μm. The specific surface area was measured by modified BET method. The photocatalytic activity of the obtained trigonal (α) ZrMo₂O₈ powders was investigated by degradation of a model aqueous solution of Malachite Green (MG) upon UV-light irradiation.     

Reactivity of triangular oxalate cluster complexes [M<Subscript>3</Subscript>Q<Subscript>7</Subscript>(C<Subscript>2</Subscript>O<Subscript>4</Subscript>)<Subscript>3</Subscript>]<Superscript>2−</Superscript> (M = Mo or W; Q = S or Se)

The reactions of the oxalate complexes [M₃Q₇(C₂O₄)₃]²⁻ (M = Mo or W; Q = S or Se) with Mn^II, Co^II, Ni^II, and Cu^II aqua and ethylenediamine complexes in aqueous and aqueous ethanolic solutions were studied. The previously unknown heterometallic complexes [Mo₃Se₇(C₂O₄)₃Ni(H₂O)₅]·3.5H₂O (1) and K₃{[Cu(en)₂H₂O]([Mo₃S₇(ox)₃]₂Br)}·5.5H₂O (2) were synthesized. In these complexes, the oxalate clusters serve as monodentate ligands. The K(H₂en)₂[W₃S₇(C₂O₄)₃]₂Br·4H₂O salt (3) was isolated from solutions containing Co^II, Ni^II, or Cu^II aqua complexes and ethylenediamine. The reaction of [Mo₃Se₇(C₂O₄)₃]²⁻ with HBr produced the bromide complex [Mo₃Se₇Br₆]²⁻, which was isolated as (Bu₄N)₂[Mo₃Se₇Br₆] (4). Complexes 1–3 were characterized by X-ray diffraction, IR spectra, and elemental analysis. The formation of 4 was detected by electrospray mass spectrometry. Dedicated to Academician G. A. Abakumov on the occasion of his 70th birthday. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1645–1649, September, 2007.     

Study of the crystallization fields of cobalt(II) slenites in the system CoSeO<Subscript>3</Subscript>-SeO<Subscript>2</Subscript>-H<Subscript>2</Subscript>O

Summary The solubility of CoSeO₃-SeO₂-H₂O system in the temperature region 298-573 K was studied. The phase diagram of cobalt(II)selenites was drawn and the crystallization fields for the different phases were determined. Depending on the conditions for hydrothermal synthesis, CoSeO₃×2H₂O, α-CoSeO₃×1/3H₂O, β-CoSeO₃×1/3H₂O, CoSeO₃, Co(HSeO₃)₂×2H₂O and CoSe₂O₅ were obtained. The different phases were proved and characterized by chemical and X-ray analyses, as well as IR spectroscopy.     

Standard molar enthalpies of formation of [RE(Gly)<Subscript>4</Subscript>(Im)(H<Subscript>2</Subscript>O)](ClO<Subscript>4</Subscript>)<Subscript>3</Subscript> (<Emphasis Type="Italic">RE</Emphasis>=Eu,Sm)

The two complexes, [RE(Gly)₄(Im)(H₂O)](ClO₄)₃(s)(RE = Eu, Sm), have been synthesized and characterized. The standard molar enthalpies of reaction for the following reactions, RECl₃·6H₂O(s)+4Gly(s)+Im(s)+3NaClO₄(s) = =[RE(Gly)₄(Im)(H₂O)](ClO₄)₃(s)+3NaCl(s)+5H₂O(l), were determined by solution-reaction colorimetry. The standard molar enthalpies of formation of the two complexes at T = 298.15 K were derived as Δ_f H _m^Θ {Eu(Gly)₄(Im)(H₂O)}(ClO₄)₃(s)} = = −(3396.6±2.3) kJ mol⁻¹ and Δ_f H _m^Θ {Sm(Gly)₄(Im)(H₂O)}(ClO₄)₃(s)} = −(3472.7±2.3) kJ mol⁻¹, respectively.     

Crystallization and Phase Stability of CaSO<Subscript>4</Subscript> and CaSO<Subscript>4</Subscript> – Based Salts

Summary.  Calcium sulfate occurs in nature in form of three different minerals distinguished by the degree of hydration: gypsum (CaSO₄·2H₂O), hemihydrate (CaSO₄·0.5H₂O) and anhydrite (CaSO₄). On the one hand the conversion of these phases into each other takes place in nature and on the other hand it represents the basis of gypsum-based building materials. The present paper reviews available phase diagram and crystallization kinetics information on the formation of calcium sulfate phases, including CaSO₄-based double salts and solid solutions. Uncertainties in the solubility diagram CaSO₄–H₂O due to slow crystallization kinetics particularly of anhydrite cause uncertainties in the stable branch of crystallization. Despite several attempts to fix the transition temperatures of gypsum–anhydrite and gypsum–hemihydrate by especially designed experiments or thermodynamic data analysis, they still vary within a range from 42–60°C and 80–110°C. Electrolyte solutions decrease the transition temperatures in dependence on water activity. Dry or wet dehydration of gypsum yields hemihydrates (α-, β-) with different thermal and re-hydration behaviour, the reason of which is still unclear. However, crystal morphology has a strong influence. Gypsum forms solid solutions by incorporating the ions HPO₄ ²⁻, HAsO₄ ²⁻, SeO₄ ²⁻, CrO₄ ²⁻, as well as ion combinations Na⁺(H₂PO₄)⁻ and Ln³⁺(PO₄)³⁻. The channel structure of calcium sulfate hemihydrate allows for more flexible ion substitutions. Its ion substituted phases and certain double salts of calcium sulfate seem to play an important role as intermediates in the conversion kinetics of gypsum into anhydrite or other anhydrous double salts in aqueous solutions. The same is true for the opposite process of anhydrite hydration to gypsum. Knowledge about stability ranges (temperature, composition) of double salts with alkaline and alkaline earth sulfates (esp. Na₂SO₄, K₂SO₄, MgSO₄, SrSO₄) under anhydrous and aqueous conditions is still very incomplete, despite some progress made for the systems Na₂SO₄–CaSO₄ and K₂SO₄–CaSO₄–H₂O. Corresponding author. E-mail: daniela.freyer@chemie.tu-freiberg.de Received December 17, 2002; accepted January 10, 2003 Published online April 3, 2003     

Synthesis of phases of composition PbNb<Subscript>2</Subscript>O<Subscript>6</Subscript> and BaNb<Subscript>2</Subscript>O<Subscript>6</Subscript> with the use of active precursors

Low-temperature method for synthesis of phases of composition PbNb₂O₆ and BaNb₂O₆ and solid solutions based on these phases was developed using the results obtained in a study of the interaction of α-Nb₂O₅·xH₂O with PbO·xH₂O and Ba(OH)₂.     

Thermal and spectral features of nickel compounds synthesized within the pores of photonic crystals based on SiO<Subscript>2</Subscript>

Nanoparticles of NiC₂O₄ · 2H₂O were obtained within the interspheric voids of synthetic opal polycrystalline samples based on SiO₂. The thermal decomposition of NiC₂O₄ · 2H₂O inclusions within the pores of crystallites was studied by means of thermal gravimetry and differential scanning calorimetry under static conditions in atmospheres of He and air. The efficient activation energy of dehydration (180 ± 10 kJ mol⁻¹) and dehydration enthalpy of nickel oxalate crystalline hydrate (69.9 kJ mol⁻¹) within the pores of photonic crystals based on SiO2 were calculated. Pyrolysis of the nickel oxalate led to the formation of NiO nanoparticles within the voids and on the external surface of the photonic crystallites. The behavior of polycrystalline samples of the photonic crystals in a medium of immersion liquids was studied. It was shown that the partial population of the interspheric pores of photonic crystals with NiC₂O₄ · 2H₂O, NiO, and Ni that diffuse visible light do not lead to a total loss of light conductivity in the immersion medium. The diffuse reflection spectra of a sample of photonic crystals populated with NiC₂O₄ · 2H₂O and NiO phases were recorded. A sample of photonic crystals with inclusions of metallic nickel particles exhibiting magnetic properties was obtained by treating nickel oxide-containing synthetic opal based on SiO₂ with molecular hydrogen.     

Thermal Decomposition of the System CO(NH<Subscript>2</Subscript>)<Subscript>2</Subscript>-H<Subscript>3</Subscript>PO<Subscript>4</Subscript> in the Presence of Nitrate Compounds

Chemical, derivatographic, IR spectral, and X-ray diffraction analyses were used to study thermal transformations in the system CO(NH₂)₂-H₃PO₄ and in the same system with addition of KNO₃, CsNO₃, LiNO₃ · 3H₂O, and NH₄NO₃ salts in the temperature range 20–600°C. The influence of the chosen nitrate compounds on the process of reorganization of the constituent ingredients, evolution of nitrogen into the gas phase, yield of the solid residue, and preservation of nitrogen and phosphorus was revealed.     

Coordination characteristics of trivalent lanthanides and actinides in molten hydrate salts of Ca(NO<Subscript>3</Subscript>)<Subscript>2</Subscript> and CaCl<Subscript>2</Subscript>

Distribution behavior of Ce(III), Am(III), and Cm(III) between tri-n-butyl phosphate solution and molten calcium nitrate hydrate Ca(NO₃)₂·RH₂O or molten calcium chloride hydrate CaCl₂·RH₂O was studied radiochemically. In Ca(NO₃)₂·RH₂O systems, maximum separation factors of Ce and Cm to Am were observed to be 12 (Ce/Am) and 1.7 (Cm/Am). The distribution ratios of these elements increased with the decrease of water activity in the hydrates, and the extractabilities at the water deficient region was less sensitive compared to those at the water abundant region. This trend was similar to the coordination circumstance change observed in electronic absorption spectra of Nd(III) in the hydrates.     

Structure and properties of H<Subscript>8</Subscript>(PW<Subscript>11</Subscript>TiO<Subscript>39</Subscript>)<Subscript>2</Subscript>O heteropoly acid

Heteropoly acid (HPA) H₈(PW₁₁TiO₃₉)₂O·xH₂O (I) is synthesized by three different ways and studied by chemical analysis, potentiometric titration, mass-spectrometry, IR, ³¹P, ¹⁸³W, and ¹⁷O NMR spectroscopy, thermogravimetry, and transmission electron microscopy. Anion I consists of two subparticles of the Keggin structure bridged by Ti-O-Ti. The dimeric anion exists in HPA aqueous solutions at [I] > 0.02 M. At pH > 0.6 it splits to a [PW₁₁TiO₄₀]⁵⁻ monomer stable up to pH ∼ 6. When heated (150–400)°C, I splits into H₃PW₁₂O₄₀ and, apparently, H₃PW₁₀Ti₂O₃₈ without phase separation. Thermolysis products are soluble and when dissolved in water turn again into I. Complete decomposition of I to oxides occurs at ∼450°C.     

Synthesis,structural, spectral,thermal and comparative biological activity studies of [V<Subscript>2</Subscript>O<Subscript>2</Subscript>(SO<Subscript>4</Subscript>)<Subscript>2</Subscript>(H<Subscript>2</Subscript>O)<Subscript>6</Subscript>]

The hydrothermal reaction of a mixture of V₂O₅, VCl₃, 2,5-pyridinedicarboxylic acid and diluted H₂SO₄ for 68 h at 180°C gives a blue colored solution which yields prismatic blue crystals of IV ₂ ^IV O₂(SO₄)₂(H₂O)₆] (1) in 32% yield (based on V). Complex 1 was investigated by means of elemental analysis (C, H and S), TGA, FT-IR, manganometric titration, Single Crystal X-ray Diffraction Methods and also comparative antimicrobial activities. Crystal data for the compound: monoclinic space group P2₁/c and unit cell parameters are a = 7.3850(12) Å, b = 7.3990(7) Å, c = 12.229(2) Å, β = 108.976(12)° and Z = 2. Although structure of 1 as a natural mineral has been previously determined, this work covers new preparation method and full characterization of 1 along with comparison of antibacterial activity between 1 and the commercial vanadium(IV) oxide sulfate hydrate compounds, VOSO₄ · xH₂O (Riedel-de Haën and Alfa Aesar brand names). 1 was evaluated for the antimicrobial activity against gram-positive, gram-negative bacteria, yeasts and mould compared with the commercial VOSO₄ · xH₂O compounds. 1 showed weak activity against bacteria Bacillus cereus, Nocardia asteroides and yeast Candida albicans. A good antimicrobial activity was recorded against Cirtobacter freundii (15 mm). There are only a few reproducible well-defined vanadium(IV) starting materials to use for exploring the synthesis of new materials. VCl₄, VO(acac)₂, VOSO₄ · xH₂O and [V(IV)OSO₄(H₂O)₄] · SO₄ · [H₂N(C₂H₄)₂NH₂] are common starting materials for such applications. In addition to these compounds, 1 can be used as an oxovanadium precursor.     

Novel large heteropolymetalate complexes formed from Ni(II) and cryptate [As<Subscript>4</Subscript>W<Subscript>40</Subscript>O<Subscript>140</Subscript><Superscript>28-</Superscript>

The heteropolytungstate (NH4)₂₀[Na2(H₂O)₂Ni(H₂O)₅{Ni(H₂O)}₂As₄W₄₀O₁₄₀] · 61H₂O is obtained by the reaction of Na₂₇[NaAs₄W₄₀O₁₄₀] · 60H₂O with NiCl₂ · 6H₂O and NH₄Cl in pH≈4.0. The structure and chemical composition are determined by X-ray diffraction analysis and element analysis. The crystal data and main structure refinement are: a = 1.33135(18) nm, b = 1.9722(3) nm, c = 3.6430(5) nm, α = 78.010(2)°, β = 82.145(2)δ, γ = 74.385(2)°, V = 8.978(2) nm³, triclinic crystal system, space group: P1, Z = 2, R1 = 0.0512, and wR2 = 0.0684(I >2σ). The four S2 sites of the big cyclic ligand [As₄W₄₀O₁₄₀]^28- are occupied by two Na⁺ and two Ni²⁺ respectively, and each site supplies four O_d coordinating to metal ion. The coordination number of Ni²⁺ is six, and that of two Na⁺ is five and six respectively. The third Ni²⁺ locates outside the cyclic [As₄W₄₀O₁₄₀]^28- and connects with one O_d, and its coordination number is six.