Influence of Amide Connectivity on the Hydrogen-Bond-Directed Self-Assembly of [n.n]Paracyclophanes

Reported here is the synthesis and self-assembly characterization of [n.n]paracyclophanes ( [n.n]pCps , n=2, 3) equipped with anilide hydrogen bonding units. These molecules differ from previous self-assembling [n.n]paracyclophanes ( [n.n]pCps ) in the connectivity of their amide hydrogen bonding units (C-centered/carboxamide vs. N-centered/anilide). This subtle change results in a ≈30-fold increase in the elongation constant for the [2.2]pCp -4,7,12,15-tetraanilide ( [2.2]pCpNTA ) compared to previously reported [2.2]pCp -4,7,12,15-tetracarboxamide ( [2.2]pCpTA ), and a ≈300-fold increase in the elongation constant for the [3.3]pCp -5,8,14,17-tetraanilide ( [3.3]pCpNTA ) compared to previously reported [3.3]pCp -5,8,14,17-tetracarboxamide ( [3.3]pCpTA ). The [n.n]pCpNTA monomers also represent the reversal of a previously reported trend in solution-phase assembly strength when comparing [2.2]pCpTA and [3.3]pCpTA monomers. The origins of the assembly differences are geometric changes in the association between [n.n]pCpNTA monomers—revealed by computations and X-ray crystallography—resulting in a more favorable slipped stacking of the intermolecular π-surfaces ( [n.n]pCpNTA vs. [n.n]pCpTA ), and a more complementary H-bonding geometry ( [3.3]pCpNTA vs. [2.2]pCpNTA ).     

Mechanism of the conversion of inverted CB[6] to CB[6

Inverted cucurbit[n]urils (iCB[n]) form as intermediates during the synthesis of cucurbit[n]urils from glycoluril and formaldehyde in HCl (85 degrees C). Product resubmission experiments establish that the diastereomeric iCB[6] and iCB[7] are kinetic products that are less stable thermodynamically than CB[6] or CB[7] (>2.8 kcal mol(-1)). When iCB[6] or iCB[7] is heated under aqueous acidic conditions, a preference for ring contraction is noted in the formation of CB[5] and CB[6], respectively. Interestingly, under anhydrous acidic conditions ring size is preserved with iCB[6] delivering CB[6] cleanly. To establish the intramolecular nature of the iCB[6] to CB[6] conversion under anhydrous, but not aqueous, acidic conditions we performed crossover experiments involving mixtures of iCB[6] and its (13)C=O labeled isotopomer (13)C(12)-iCB[6]. An unusual diastereomeric CB[6] with a M?bius geometry (13) is proposed as a mechanistic intermediate in the conversion of iCB[6] to CB[6] under anhydrous acidic conditions. The improved mechanistic understanding provided by this study suggests improved routes to CB[n]-type compounds.     

Carbon-rich molecules: synthesis and isolation of aryl/heteroaryl terminal bis(butadiynes) (HC[triple bond]C-C[triple bond]C-Ar-C[triple bond]C-C[triple bond]CH) and their applications in the synthesis of oligo(arylenebutadiynylene) molecular wires

The synthesis, isolation and characterisation are reported for a series of terminal aryl/heteroaryl bis(butadiynes) (HC[triple bond]C-C[triple bond]C-Ar-C[triple bond]C-C[triple bond]CH) 4a-e including the X-ray molecular structure of the 2,5-pyridylene derivative 4d; compound 4a and the mono-protected analogue [HC[triple bond]C-C[triple bond]C-Ar-C[triple bond]C-C[triple bond]C-C(OH)Me2] 5a serve as convenient precursors for the synthesis of highly-conjugated oligo(arylenebutadiynylene)s.     

Single-electron entrapment of [8]annulyne, biannulenylenes, and an annulenoannulene

The low-temperature (-100 degrees C) dehydrohalogenation of bromocyclooctatetraene followed by immediate electron-transfer yields a stable solution of the [8]annulyne anion radical. If the unstable [8]annulyne is reacted with itself, cyclobutadiene, or benzyne, the respective bi-[8]annulenylene, [6]annuleno[8]annulene, or [6]-[8]annulenylene can be trapped as their anion radicals via one-electron transfer. These condensation products were all obtained from simple [2 + 2] cycloaddition reactions. B3LYP/6-31G geometry optimizations were carried out, and the calculated spin densities were compared to the EPR spectral results obtained for the anion radicals of [6]annuleno[8]annulene, [8]annulyne, bi[8]annulenylene, and [6]-[8]annulenylene, and excellent agreement has been realized. This simple "one-pot" approach should be applicable to a wide range of such systems.     

Cyclocondensation of 5-benzoyl-3-ethoxycarbonyl-6-methylthio-1-R-1,2-dihydropyrid-2-ones with heterocyclic N,N-and N,C-1,3-dinucleophiles

[3+3] Cyclocondensation of 5-benzoyl-3-ethoxycarbonyl-6-methylthio-1-R-1,2-dihydropyrid-2-ones with heterocyclic N,N-and N,C-1,3-dinucleophiles proceeds regioselectively to give a series of new tri-and tetracyclic heterosystems, viz. derivatives of 5,6-dihydropyrazolo[1,5-a]pyrido[2,3-d]pyrimidin-6-one, 1,2-dihydropyrido[2,3-d]pyrido[2′,3′: 3,4]pyrazolo[1,5-a]pyrimidin-2-one, 8,9-dihydro-5H-pyrido-[2,3-d]thiazolo[3,2-a]pyrimidin-8-one, 1,2-dihydrobenzo[4,5]imidazo[1,2-a]pyrido[2,3-d]pyrimidin-2-one, and 1,2-dihydrobenzo[4,5]imidazo[1,2-g][1,6]naphthyridin-2-one.     

Nucleophilic addition to benzo[b]thieno[2,3-b]benzo[b]thiophene S,S,S′,S′-tetroxide

The reaction of benzo[b]thieno[2,3-b]benzo[b]thiophene S,S,S′,S′-tetroxide with primary and secondary amines and with alcohols gave 10 b-amino- and 10 b-alkoxy-5a, 10b-dihydro-benzo[b]thieno[2,3-b]benzo[b]thiophene S,S,S′,S′-tetroxides. These nucleophilic reagents do not add to benzo[b]thieno[2,3-b]benzo[b]thiophene S,S-dioxide.     

Self-assembly and characterization of cyano-bridged bimetallic [Ln-Fe] and [Ln-Co] complexes (Ln = La, Pr, Nd and Sm). Nature of the magnetic interactions between the Ln(3+) and Fe(3+) ions

Two structural series, including seven isomorphous heterodinuclear complexes, [Ln(DMSO)4(H2O)3(mu-CN)M(CN)5].H2O ([La-Fe] (1), [Pr-Fe] (2), [Pr-Co] (3), [Nd-Fe] (4), [Nd-Co] (5), [Sm-Fe] (6) and [Sm-Co] (7)), and seven isostructural 2-D stair-like cyano-bridged bimetallic assemblies, [Ln(DMSO)2(H2O)(mu-CN)4M(CN)2]n ([La-Fe]n (8), [Pr-Fe]n (9), [Pr-Co]n (10), [Nd-Fe]n (11), [Nd-Co]n (12), [Sm-Fe]n (13) and [Sm-Co]n (14)) (DMSO = dimethylsulfoxide), have been rationally prepared by a facile approach, a ball-milling method, and characterized by X-ray diffraction and magnetic measurements. The isomorphous structures, in conjunction with the diamagnetism of the Co(3+) and La(3+) ions, allow an approximation to the nature of coupling between the iron(III) and lanthanide(III) ions in the Ln(3+)-Fe(3+) complexes. The Ln(3+)-Fe(3+) interaction is ferromagnetic for the dinuclear [Pr-Fe] (2), [Nd-Fe] (4), and [Sm-Fe] (6) systems and for the 2-D [Pr-Fe]n (9), [Nd-Fe]n (11), and [Sm-Fe]n (13) assemblies.     

Structural effects on the electronic properties of extended fused-ring thieno[3,4-b]pyrazine analogues

The synthesis and characterization of the extended thieno[3,4-b]pyrazine analogues acenaphtho[1,2-b]thieno[3,4-e]pyrazine (3a), 3,4-dibromoacenaphtho[1,2-b]thieno[3,4-e]pyrazine (3b), 3-octylacenaphtho[1,2-b]thieno[3,4-e]pyrazine (3c), dibenzo[f,h]thieno[3,4-b]quinoxaline (4), and thieno[3',4':5,6]pyrazino[2,3-f][1,10]phenanthroline (5) are reported. Comparison of structural, electrochemical, and photophysical properties to those of simple thieno[3,4-b]pyrazines are provided in order to provide structure-function relationships within this series of compounds.     

[7+2]- and [11+2]-cycloaddition reactions of diazo-azoles with isocyanates to azolo[5,1-d] [1,2,3,5] tetrazine-4-ones

Diazo-azoles react as 1,7- or 1,11-dipoles with isocyanates to form the hitherto unknown pyrazolo[5,1-d] [1,2,3,5]tetrazine-4-ones, [1,2,3,5]tetrazino[5,4-b]indazole-4-ones and [1,2,3]triazolo[5,1-d][1,2,3,5]tetrazine-4-ones in a [7+2]- or [11+2]-cycloaddition reaction.     

Syntheses of some new azolopyrido‐[4′,3′:4,5]thieno[2,3‐d]pyrimidines

Diethyl 2‐[(ethoxythioxomethyl)amino]‐4,5,6,7‐tetrahydrothieno[2,3‐c]‐pyridine‐3,6‐dicarboxylate 2 , prepared from diethyl 2‐isothiocyanato‐4,5,6,7‐tetrahydrothieno[2,3‐c]pyridine‐3,6‐dicarboxylate 1 by boiling in anhydrous ethanol, was converted into pyrido[4′,3′:4,5]thieno[2,3‐d]pyrimidine derivatives 3, 4 by treatment with hydrazine hydrate. The tetracyclic systems imidazo[1,2‐a]pyrido‐[4′,3′:4,5]thieno[2,3‐d]pyrimidine 9 and pyrido[4′,3′:4,5]thieno[2,3‐d][1,3]thiazolo‐[3,2‐a]pyrimidine 10 were synthesized by the reaction of 2 with 1,2‐diaminoethane and aminoethanethiol, respectively. The hydrazino derivative 4 underwent cyclization reactions with orthoesters and nitrous acid to give the corresponding pyrido[4′,3′:4,5]thieno[2,3‐d][1,2,4]triazolo[1,5‐a]pyrimidines 5, 6 and pyrido[4′,3′:4,5]thieno[3,2‐e][1,2,3,4]tetrazolo[1,5‐a]pyrimidine 8 , respectively. Moreover, reactions of 3 with cyanogen bromide, N‐carbethoxyhydrazine, carbon disulfide, and ethylchloroformate resulted in the formation of the new pyrido[4′,3′:4,5]thieno[2,3‐d][1,3,4]thiadiazolo[3,2‐a]pyrimidine derivatives 12–15 . © 2002 Wiley Periodicals, Inc. Heteroatom Chem 13:280–286, 2002; Published online in Wiley Interscience (www.interscience.wiley.com). DOI 10.1002/hc.10030     

Tetraphenylethene-Embedded Pillar[5]arene and [15]Paracyclophane: Distorted Cavities and Host–Guest Binding Properties

Two aggregation-induced emission (AIE) macrocycles (DMP[5]-TPE and PCP[5]-TPE) were prepared by embedding Tetraphenylethene (TPE) unit into the skeletons of Dimethoxypillar[5]arene (DMP[5]) and [15]Paracyclophane ([15]PCP) at meso position, respectively. In crystal, the PCP[5]-TPE showed a distorted cavity, and the incubation of hexane inside the DMP[5]-TPE cavity caused a distinct change in the molecular conformation compared to PCP[5]-TPE. There was no complexation between PCP[5]-TPE and 1,4-dicyanobutane (DCB). UV absorption experiments showed the distorted cavity of DMP[5]-TPE hindered association with DCB.     

Synthesis of [1,2,5]selena(or thia)diazolo[3,4‐e][1,4]diazepines, [1,2,5]selena(or thia)diazolo[3,4‐e][1,4]oxazepines and [1,2,5]selena(or thia)diazolo[3,4‐c] [1,2,6]thiadiazines

Novel heterocycles [1,2,5]selenadiazolo[3,4‐e][1,4]diazepines 3a‐c , [1,2,5]thiadiazolo[3,4‐e]‐[1,4]diazepines 7a‐c , [1,2,5]selenadiazolo[3,4‐e][1,4]oxaepines 4a,b , [1,2,5]thiadiazolo[3,4‐e]‐[1,4]oxazepines 9a‐c and [1,2,5]selena(or thia)diazolo[3,4‐c][1,2,6]thiadiazines 10a,b were synthesized starting form 4,6‐dimethyl[1,2,5]se]enadiazolo[3,4‐d]pyrimidine‐5,7(4H,6H)‐dione 1 or 4,6‐dimethyl‐[1,2,5]thiadiazolo[3,4‐d]pyrimidine‐5,7(4H,6H)‐dione 5 .     

Synthesis and some properties of binuclear ruthenocenes bridged by oligoynes: formation of bis(cyclopentadienylidene)cumulene diruthenium complexes in the two-electron oxidation

The monoynes [Rc*C[triple bond]CRc*] and [Rc'C[triple bond]CRc'] were obtained in improved yields using [Mo(CO)6]/2-FC6H5OH as a catalyst in the alkyne metathesis of [Rc*C[triple bond]CMe] and [Rc'C[triple bond]CMe], respectively (Rc = ruthenocenyl, Rc* = 1',2',3',4',5'-pentamethylruthenocenyl, and Rc' = 2',3',4',5'-tetramethylruthenocenyl groups). The diynes [Rc*(C[triple bond]C)2Rc*] and [Rc'(C[triple bond]C)2Rc'] were synthesized by the oxidative coupling of the corresponding terminal ethynes in good yields. The triyne [Rc*(C[triple bond]C)3Rc*] and the tetrayne [Rc*(C[triple bond]C)4Rc*] were prepared by the hetero- and homocoupling of [Rc*C[triple bond]CC[triple bond]CH], which was obtained from the reaction of [Rc*C[triple bond]CCHO] with Li[N2CSiMe3], respectively. Although the oxidation waves did not always exhibit a clear two-electron oxidation process, the oxidation potentials shifted to a lower potential with an increase in the number of methyl substituents on the ruthenocenyl ring, and shifted to a higher potential with the increase in the number of C[triple bond]C units; this result is in contrast to that found in the [Rc(CH=CH)(n)Rc] series. The chemical oxidation of [Rc'C[triple bond]CRc'] yielded a stable two-electron-oxidized species, the structure of which was confirmed by X-ray crystallography to be [Ru2(mu2-eta(6):eta(6)-C5Me4C=CC5Me4)(eta-C5H5)2](BF4)2. Changing the substituents (Rc, Rc*, and Rc') had no effect on the chemical oxidation, but in the case of the Rc' series the Me substituent increased the stability of the two-electron-oxidized species in solution. The diyne [Rc*(C[triple bond]C)2Rc*] and the triyne [Rc*(C[triple bond]C)3Rc*] also gave a similar but unstable two-electron-oxidized species. In acetone or acetonitrile, the two-electron-oxidized species of [Rc*C[triple bond]CRc*] and [Rc*(C[triple bond]C)2Rc*] gradually formed the corresponding bis(fulvene)-type complexes. This implies that the two-electron-oxidized species of [Rc*(C[triple bond]C)(n)Rc*] are destabilized with the increasing n.     

Reverse phase high pressure liquid chromatography for the separation of peptide hormone diastereoisomers

Diastereoisomers of specifically labeled oxytocin derivatives were resolved using reverse phase high pressure liquid chromatography. The peptides [1-hemi-DL-[alpha-2H]cystine]oxytocin, [6-hemi-DL-[alpha-2H]cystine]oxytocin, [2-DL-[alpha-2H]tyrosine]oxytocin and[8-DL-[2-13C]leucine]oxytocin were readily separated using the conditions described. The diastereoisomers of the oxytocin analog [3-DL-[2-13C]leucine]oxytocin also demonstrated baseline resolution under the same conditions. The procedure offers the investigator a rapid method for screening synthetic oxytocin peptides for undesirable diastereoisomeric by-products.     

Water-soluble pillar[4]arene[1]quinone: Synthesis,host-guest property and application in the fluorescence turn-on sensing of ethylenediamine in aqueous solution,organic solvent and air

Water-soluble pillar[5]arenes are a class of typical macrocycles and have aroused tremendous attention for its easy to modify, abundant host-guest properties and extensive applications. However, up to now, all the reported water-soluble pillar[5]arenes acted as the host molecules, whereas they failed to be postsynthetically modified, which seriously impeded the development of the pillar[5]arene-based supramolecular chemistry. In this work, a new water-soluble pillar[5]arene, pillar[4]arene[1]quinone, was designed and synthsized with eight quaternary ammonium groups as well as a quinone units. Such a new water-soluble pillar[4]arene[1]quinone was capable of forming 1:1 stable complex with sodium 1-octanesulfonate in aqueous solution. Since the 1,4-quinone unit of WP[4]Q[1] could react with ethylenediamine (EDA) to form a conjugated quinoxaline structure, so pillar[4]arene[1]quinone could apply to the facile fluorescence turn-on sensing of EDA in aqueous solution, organic solvent and air.     

P=C bonds as building blocks for three- and four-membered heterocyclic cations: synthesis, structures and mechanistic studies

The activation of the P=C bond of phosphaalkenes with electrophiles is investigated as a means to prepare and characterize unusual organophosphorus compounds. Treatment of RP=CHtBu (1a: R=tBu; 1b: R=1-adamantyl) with HOTf (0.5 equiv) affords diphosphiranium salts [RP-CHtBu-PR (CH(2)tBu)]OTf ([2a]OTf and [2b]OTf), each containing a three-membered P(2)C ring. In contrast, the addition of MeOTf (0.5 equiv) to either 1a or 1b affords diphosphetanium salts [RP-CHtBu-P(Me)R-CHtBu]OTf ([3a]OTf and [3b]OTf) containing four-membered P(2)C(2) heterocycles. The phosphenium triflate [tBuP(CH(2)tBu)]OTf ([5a]OTf) and methylenephosphonium triflate [tBu(Me)P=CHtBu]OTf ([7a]OTf) are identified spectroscopically as intermediates in the formation of [2a](+) and [3a](+), respectively. The phosphenium triflate intermediate can be trapped with 2-butyne to afford phosphirenium salt [MeC=CMe-tBuPCH(2)tBu]OTf ([6a]OTf). Treatment of diphosphetanium [3a]OTf with an excess MeOTf affords [Me(2)P-CHtBu-PMetBu-CHtBu](OTf)(2) ([4a](OTf)(2)), a compound containing a diphosphetanium dication. The molecular structures are reported for [2a]OTf, [2b][H(OTf)(2)], [3a]I, [3b]I, [4a](OTf)(2), and [6a]OTf.     

Synthesis of benzo[b]thieno‐ and benzo[b]furano‐[2,3‐a]pyrrolo[3,4‐c]carbazole‐5‐, ‐7‐ and ‐5,7‐dione

Benzo[b]thieno[2,3‐a]pyrrolo[3,4‐c]carbazoles and benzo[b]furano[2,3‐a]pyrrolo[3,4‐c]carbazoles were prepared from 2‐(2‐benzo[b]thieno)‐ (8) and 2‐(2‐benzo[b]furano)‐3‐[3‐(2,5‐dioxo‐lH‐pyrrolidinyl)]indole (9) by a palladium(II)acetate/tetrachloro‐1,4‐benzoquinone oxidative A‐E ring closure.     

Magnetism of cyano-bridged Ln3+-M3+ complexes. Part II: one-dimensional complexes (Ln3+ = Eu, Tb, Dy, Ho, Er, Tm; M3+ = Fe or Co) with bpy as blocking ligand

The reaction of Ln(NO3)3(aq) with K3[Fe(CN)6] or K3[Co(CN)6] and 2,2'-bipyridine in water/ethanol led to 13 one-dimensional complexes: trans-[M(CN)4(mu-CN)2Ln(H2O)4(bpy)]n.4nH2O.1.5nbpy (Ln = Eu3+, Tb3+, Dy3+, Ho3+, Er3+, Tm3+, Lu3+; M = Fe3+, Co3+). The structures for [EuFe]n (1), [TbFe]n (2), [DyFe]n (3), [HoFe]n (4), [ErFe]n (5), [TmFe]n (6), [LuFe]n (7), [EuCo]n (8), [TbCo]n (9), [DyCo]n (10), [HoCo]n (11), [ErCo]n (12), and [TmCo]n (13) have been solved: they crystallize in the triclinic space group P and are isomorphous. They exhibit a supramolecular architecture created by the interplay of coordinative, hydrogen bonding, and pi-pi interactions. A stereochemical study of the eight-vertex polyhedra of the lanthanide ions, based on continuous shape measures, is presented. The Ln3+-Fe3+ interaction is antiferromagnetic in [DyFe]n and [TbFe]n. For [EuFe]n, [HoFe]n, [ErFe]n, and [TmFe]n, there is no sign of any significant interaction. The magnetic behavior of [DyFe]n suggests the onset of weak long-range ferromagnetic ordering at 2.5 K.     

Binding modes of cucurbit[6]uril and cucurbit[7]uril with a series of bis-pyridinium compounds

Binding behaviors of cucurbit[6]uril (CB[6]) and cucurbit[7]uril (CB[7]) with a series of bis-pyridinium compounds N, N’-hexamethylenebis(1-alkyl-4-carbamoyl pyridinium bromide) (HBPB-n) (alkyl chain length, n = 6, 8 and 10) guests were investigated using ¹H-NMR, ESI–MS and single crystal X-ray diffraction methods. The results show that CB[6] and CB[7] can form [2]pseudorotaxanes with HBPB-n easily. When increasing the length of tail alkyl chain, the binding site of CB[6] at guest molecules changed from the tail to the middle part, while CB[7] remained located over the tail chain. As CB[6] and CB[7] were added in HBPB-8 aqueous solution, a [3]pseudorotaxane was formed by the inclusion of the internal middle site in CB[6] and the tail chain in CB[7].     

Cu-[M’]MOR和Ag-[M’]MOR (M’=B,Al, Ga,Fe)的酸性

采用Dmol3程序中基于密度泛函理论(DFT)的广义梯度方法(GGA)和BLYP方法以及DND基组, 研究了丝光沸石H-[M']MOR、Cu-[M']MOR和Ag-[M']MOR(M'=B, Al, Ga, Fe)结构及其对NH3分子的吸附, 获得了吸附平衡构型和吸附能. NH3分子在H-[M']MOR中的吸附主要是通过NH3分子中氮原子上的孤对电子与质子酸位作用, NH3分子在H-[Al]MOR、H-[Ga]MOR和H-[Fe]MOR上发生化学吸附, 而在H-[B]MOR上发生物理吸附, 这与文献结果相符. NH3分子与Cu-[M']MOR 和Ag-[M']MOR分子筛之间主要通过氮上的孤对电子和平衡离子(Cu+和Ag+)的s空轨道间配位作用而发生化学吸附. 吸附能数据表明, 在H-[M']MOR、Cu-[M']MOR 和Ag-[M']MOR中, A1原子进入骨架导致H-[A1]MOR、Cu-[A1]MOR和Ag-[A1]MOR的酸强度最强; 对于同一种原子取代的丝光沸石, 其酸强度次序为: Cu-[M']MOR > Ag-[M']MOR > H-[M']MOR. 此外, 还对吸附前后的沸石中平衡离子(H+、Cu+和Ag+)及NH3分子的Mulliken电荷集居数作了研究和分析.