Multiwavelength Brillouin-erbium fiber laser incorporating a fiber Bragg grating filter

In this paper, we demonstrate a multiwavelength Brillouin erbium fiber laser in a Fabry-Perot cavity. The design utilized a bidirectional oscillation provided by a fiber Bragg grating filter and a fiber loop mirror at each end of the laser cavity. A stable operation of 25 Brillouin-Stokes lines was obtained at around a 1559-nm band.     

Flat amplitude multiwavelength Brillouin–Raman random fiber laser with a half-open cavity

In this paper, we experimentally demonstrate a novel configuration of multiwavelength Brillouin–Raman random fiber laser (MBRRFL) utilizing a half-open cavity. The laser resonator is formed by fiber loop mirror at the Brillouin pump (BP) side and random distributed Rayleigh backscattering in a 10 km dispersion compensating fiber. As a result, we are able to obtain a flat amplitude bandwidth of 16.8 nm from 1,550.0 to 1,566.8 nm built-in 210 uniform Brillouin Stokes lines with 0.08 nm spacing and an average OSNR of 13.5 dB. We also studied the influence of BP power and wavelength on the MBRRFL’s performance. Furthermore, comparing with the open cavity configuration, the discrepancies in power level and linewidth between neighboring channels are overcome by using the half-open cavity.     

Self-seeded multiwavelength Brillouin-erbium fiber laser

We propose and demonstrate a self-seeded multiwavelength Brillouin-erbium fiber laser with an internally self-excited Brillouin pump, which is achieved by incorporation of a length of single-mode fiber together with a Sagnac loop mirror into a fiber ring cavity. In this simple scheme the Brillouin pump is self-excited in the fiber ring cavity and then used to seed the Brillouin multiwavelength comb in the single-mode fiber. Stable generation of more than 120 Brillouin Stokes wavelengths with relatively uniform amplitudes is demonstrated with this scheme. It is also shown that such a self-seeded Brillouin laser has good stability and repeatability.     

Investigation on stimulated Brillouin scattering characteristics in a highly doped Bismuth-based Erbium-doped fiber

Stimulated Brillouin scattering (SBS) characteristics in a 49 cm long highly doped Bismuth-based Erbium doped fiber (Bi-EDF) is investigated in the ring and linear cavity configurations. At Brillouin pump (BP) power of 6 dBm, the Brillouin laser peak power of the optimized ring Brillouin Erbium fiber laser (BEFL) is obtained at 23 dB higher than the peak power of the conventional linear cavity at an up shifted wavelength of 0.08 nm. This Bi-EDF ring cavity operates at nearly 1563 nm wavelength region, which is up-shifted by 0.08 nm from the Brillouin pump wavelength with the side mode suppression ratios (SMSR) of 29 and 23 dB in the forward and backward directions, respectively.     

Multiwavelength self-seeded Brillouin-erbium fiber laser with 45-nm tunable range

We have demonstrated a tunable multiwavelength self-seeded Brillouin-erbium fiber laser (BEFL) without externally Brillouin pumping. In this scheme, the stable multiwavelength comb can be produced within a ∼45-nm wavelength tuning range through adjusting the polarization controllers (PCs) in a high-birefringent Sagnac loop mirror. The generation of ∼200-line Stokes comb has been achieved by adjusting PCs under bidirectional pumping of two laser diodes, which is the largest wavelength number to the best of our knowledge. The effect of 980 nm pump power on the multiwavelength generation was also investigated.     

Linear cavity Brillouin fiber laser with improved characteristics

A configuration for linear cavity Brillouin fiber laser (BFL) generation is demonstrated using a standard single-mode fiber, two optical circulators, a 3 dB coupler, and a 95/5 coupler to allow high efficiency. With a Brillouin pump (BP) power of 13 dBm, the laser peak power is 12.3 dB higher than a conventional linear cavity BFL at an upshifted wavelength of 0.086 nm from the BP wavelength. In addition, it is revealed that the BFL peak power can be higher than the transmitted BP peak power when the BP power exceeds the second Brillouin Stokes threshold power.     

Self-excited brillouin–erbium fiber laser for DWDM applications

The operation of the self-excited Brillouin/erbium fiber laser (BEFL) is experimentally demonstrated. It uses a forward pumped erbium-doped fiber (EDF) as a gain medium to generate a Brillouin-pump (BP) and amplify the Stokes frequency signals generated in a single-mode fiber (SMF). The operating wavelength varies with changes of coupling ratio of the looping arm. The optimum BEFL operation is obtained with a center wavelength at 1567.5 nm by looping back 20% of BEFL output into the other end of the SMF. The BEFL output power and number of lines increases gradually as 980-nm pump power increases. At the maximum 980-nm pump power of 118 mW, a stable and strong BEFL comb of up to 16 lines with 11 GHz spacing is demonstrated. The self-excited BEFL has the potential to be used in the future dense wavelength division multiplexing (DWDM) communication system.     

端面泵浦掺Yb3+双包层光纤激光器

从双包层光纤激光器的速率方程出发，得到了光纤中泵浦光与激光的功率分布、输出功率与泵浦功率的关系、腔镜反射率及光纤长度对输出功率的影响。研究结果表明：输出激光功率与光纤长度及后腔镜反射率有很强的依赖关系，存在一个输出功率最大的最佳光纤长度。后腔镜反射率越大，输出激光功率越小；当光纤长度较短时，在输出端放置反射镜使泵浦光高反射，可以提高输出功率和效率。通过对端面泵浦掺Yb3+双包层光纤激光器进行理论分析和实验研究，得到输出激光的中心波长为1088.3nm，斜率效率为33.7%，最大输出功率为1.75W。     

Effects of output coupler reflectivity on the performance of a linear cavity Brillouin/erbium fiber laser

The effect of output coupler reflectivity (or output coupling ratio) on the performance of a linear cavity Brillouin/erbium fiber laser (BEFL) is demonstrated. The operating wavelength, output laser power and number of channels vary with changes in the coupling ratio in the linear cavity system. The optimum BEFL operation is obtained with an output coupling of 40%, i.e., 60% of the laser power is allowed to oscillate in the cavity. A stable laser comb consisting of up to 40 channels with line spacings of approximately 0.09 nm are obtained at the Brillouin pump and 980 nm pump with powers of 2.5 mW and 100 mW, respectively. The linear cavity BEFL has the potential to be used in inexpensive wavelength division multiplexing system.      

An Enhanced Bismuth-Based Brillouin/Erbium Fiber Laser with Linear Cavity Configuration

A multi-wavelength Brillouin/erbium-doped fiber laser (BEFL) which operates in 1594 nm region is demonstrated using a 215 cm long Bismuth-based EDF and SMF. Two optical circulators were used at the output ends of the system to form a linear cavity to produce a cascaded Brillouin Stokes and anti-Stokes. A stable output laser comb of more than 20 lines was obtained with a spacing of approximately 0.089 nm at a Brillouin pump power of 4 dBm and two 1,480-nm pumps at powers of 100 mW. The number of lines is relatively higher compared with the ring cavity BEFL.     

A novel double-Brillouin-frequency spaced multi-wavelength Brillouin erbium-doped fiber laser based on non-linear amplified fiber loop mirror

In the paper, a ring double-Brillouin-frequency spaced multi-wavelength Brillouin erbium-doped fiber laser based on non-linear amplified fiber loop mirror filter is demonstrated, in which the non-linear amplified fiber loop mirror (AFLMF) is used as a filter. At the 980 nm pump power of 10.29 dBm, the tunable laser source center wavelength of 1563 nm and power of −3 dBm, up to 12 even output channels with 0.16 nm spacing are achieved. At the same time, we study the influence of 980 nm pump power, the polarization controller and the tunable laser source center wavelength on the number of Stokes light wave.     

Numerical analysis of stimulated Brillouin scattering in high-power double-clad fiber lasers

A theoretical analysis of stimulated Brillouin scattering (SBS) in linear cavity Yb³⁺-doped double-clad fiber lasers is presented by solving the steady-state rate equations with the SBS. The effects of cavity length, fiber core diameter, input mirror reflectivity at Stokes wavelength, Yb³⁺ concentration and laser linewidth on the SBS are discussed. Numerical results show that the SBS threshold power can be improved by shortening the cavity length, using large mode area fiber, reducing the input mirror reflectivity at Stokes wavelength, lowering the Yb³⁺ concentration and broadening the laser linewidth, and the influence of the laser linewidth on the SBS threshold power is more noticeable than other system parameters.     

15波长输出的布里渊掺铒光纤激光器

多波长布里渊掺铒光纤激光器是一种新型的多波长光纤激光器,其原理是利用受激布里渊增益和掺铒光纤的线性增益,可以在常温下得到波长间隔约为0．08nm(～10GHz)的多波长输出。报道的布里渊掺铒光纤激光器,在布里渊抽运功率为1．7mW、980nm抽运功率为300mW的情况下得到稳定的15个波长(间隔～10GHz)的输出,这种激光器用作光传感器、光谱分析仪以及密集波分复用系统的光源。实验发现,输出波长的个数随着980nm抽运功率的增大而增加。另外,布里渊掺铒光纤激光器的信号功率主要来自于掺铒光纤的增益,而布里渊增益对它的影响不大。     

Threshold characteristics of linear cavity Yb-doped double-clad fiber laser

The threshold characteristics of linear cavity Yb³⁺-doped double-clad fiber laser have been studied theoretically and experimentally. By solving rate equations, the expression for threshold pump power is obtained. The effects of fiber length, mirror reflectivity, pump wavelength, laser wavelength and Yb³⁺ concentration on threshold pump power are discussed. Then, the Yb³⁺-doped double-clad fiber laser with linear cavity is developed. By using various output couplers, threshold pump power has been measured. The experimental results are in accord with theory.     

Optimization of Brillouin pump wavelength location on tunable multiwavelength BEFL

Optimization of Brillouin pump (BP) wavelength location on tunable multiwavelength Brillouin-erbium fiber laser (BEFL) with BP pre-amplified technique is experimentally investigated. The tunable multiwavelength BEFL is achieved by utilization a tunable band-pass filter in a laser cavity. The optimum BP power and BP wavelength location within the filter bandwidth is determined in order to obtain the maximum stable output channels. Optimum distance of launching the BP wavelength is found at 0.80 nm shorter from the center wavelength of the filter bandwidth. 15 stable output channels are achieved from the tunable fiber laser system within the optimum range of BP power which is found to be between 5.2 to 5.7 dBm.     

A tunable multi-wavelength Brillouin–erbium fiber laser with fourfold Brillouin frequency spacing

We have experimentally demonstrated a tunable multi-wavelength Brillouin–erbium fiber laser with over 40 GHz spacing utilizing two cascaded double Brillouin-frequency-spacing cavities. In this laser configuration, two segments of 25 km-long single-mode fibers are used as Brillouin gain medium in each ring cavity, and a segment of 8 m-long erbium-doped fiber with 980 nm pump is employed to amplify Brillouin pump (BP). At BP wavelength of 1550 nm, BP power of 8.3 dBm (6.8 mW) and the maximum 980 nm pump power of 27.78 dBm (600 mW), seven output channels with fourfold Brillouin-frequency spacing, and the tuning range of 15 nm from 1545 to 1560 nm are achieved. The proposed multi-wavelength Brillouin–erbium fiber laser has wide applications, such as in microwave signal generation and optical communications.     

Amplification effect on SBS and Rayleigh scattering in the backward pumped distributed fiber Raman amplifier

The amplification effect on stimulated Brillouin scattering （SBS） and Rayleigh scattering in the backward pumped G652 fiber Raman amplifier （FRA） is studied. The pump source is a 1427.2-nm fiber Raman laser whose power is tunable between 0 - 1200 mW, and the signal source is a tunable narrow spectral bandwidth （〈 10 MHz） external cavity laser （ECL）. The Rayleigh scattering lines are amplified by the FRA and Stokes SBS lines are amplified by the FRA and the fiber Brillouin amplifier. The total gain of SBS lines is the production of the gain of Raman amplifier and that of Brillouin amplifier. In experiment, the SBS gain is about 42 dB and the saturation gain of 25-km G652 backward FRA is about 25 dB, so the gain of fiber Brillouin amplifier is about 17 dB.     

基于受激布里渊散射的波长间隔可变多波长光纤激光器

提出了一个基于自激发受激布里渊散射的波长间隔可变多波长光纤激光器.利用单模光纤中自激发产生的非线性布里渊增益和掺铒光纤的线性增益组成混合增益光纤激光器,从而使光纤激光器在室温下产生稳定的多波长输出.改变双折射光纤环镜滤波器中保偏光纤的长度,可以实现波长间隔可变多波长激光产生,提高了多波长光纤激光器操作的灵活性和实用性.实验实现了波长间隔从0.8 nm至0.076 nm可变的多波长激光产生,波长数随波长间隔减小而增加,间隔为0.08 nm的激光波长数达86.     

光纤移频分布式布里渊光纤传感技术

提出了一种利用布里渊光纤环形腔移频技术实现分布式光纤布里渊传感的方法.该方法基于布里渊光时域分析法原理,将一束单纵模运转激光器输出的激光分为两束|一束光入射布里渊光纤环形腔中产生窄线宽的受激布里渊散射光作为斯托克斯光,另一束光经过低频相位调制后作为泵浦光|斯托克斯光和泵浦光分别相向入射进入传感光纤,通过测量布里渊谱得到光纤温度或应变.利用该方法可将十几GHz的微波频率转化为兆赫信号频率进行探测处理,仅需一台激光器,因此系统结构简单、成本低,还可减小激光器频率波动对测量准确度的影响.实验验证了该方法的可行性.     

双包层光纤光栅选频双包层光纤激光器

双包层光纤激光器中多采用法布里珀罗(F-P)线形腔结构,谐振腔为一只二向色镜和光纤端面菲涅耳反射镜(反射率约为4％)构成,这属于一种有缺陷的腔结构,其稳定性不好,产生激光的波长很难得到有效控制,后腔镜不能精确选择激光器的输出波长,激光器的输出谱线较宽。在某些对激光波长有明确要求的应用中,该结构会受到限制。采用布拉格光纤光栅作腔镜,利用其窄带滤波特性,可以得到窄线宽的激光输出,目前报道的作为腔镜的布拉格光纤光栅为在单包层光敏光纤上制作而成,然后分别将不同反射率的光纤光栅与双包层增益光纤熔接,这给腔镜与双包层光纤之间带来很大的耦合损耗,影响了激光器的功率输出。该文报道了用相位掩模法在双包层光纤芯上写入了布拉格光纤光栅,并把此光纤光栅做为后腔镜．对长度为10m、20m的D形掺Yb^3 双包层光纤激光器进行实验研究,在1058nm附近得到稳定的窄线宽激光输出,3dB带宽为0．329nm。激光器最大输出功率为570mW。最后对实验结果进行了理论分析。