Tetracyanoethylene pi-complex chemistry. Indirect spectrophotometric determination of Diels-Alder-active 1,3-dienes

An indirect spectrophotometric method, based on the rapid Diels-Alder reaction between cisoid 1,3-dienes and tetracyanoethylene (TCNE) and the destruction of an aromatic-TCNE pi-complex, was developed to determine eleven 1,3-dienes in the 0.05-1.00 x 10(-3)M range. These dienes were: cyclopentadiene; 1,3-cyclohexadiene; trans-1,3-pentadiene; 2,4-dimethyl-1,3-pentadiene; trans-2-methyl-1,3-pentadiene; 2-methyl-1,3-butadiene; 9-methylanthracene; 9,10-dimethylanthracene; 1,6-diphenyl-1,3,5-hexatriene; 2,3-dimethyl-1,3-butadiene; and 1,4-diphenyl-1,3-butadiene. Three 1,3-dienes were determined in the 0.05-1 x 10(-4)M range: cyclopentadiene, trans-2-methyl-1,3-pentadiene, and anthracene. The limit of detection for cyclopentadiene in carbon tetrachloride solutions is 0.11 microg/ml. Fourteen 1,3-dienes were found to form stable pi-complexes and could not be determined by the proposed method. For these 1,3-dienes, the spectra of some of the complexes are reported; in addition, relative equilibrium constants for the pi-complexes of 2,5-dimethyl-2,4-hexadiene, cis-1,3-pentadiene, 4-methyl-1,3-pentadiene, and 1,3-cyclo-octadiene were estimated. An explanation of the transient colour in the 1,3-diene-TCNE Diels-Alder reaction is suggested.     

Oxidation of 1,3-Dioxacyclanes with Oxone and Potassium Persulfate Catalyzed by 2,2,5,5-Tetramethyl-4-Phenyl-3-Imidazoline-3-Oxide-1-Oxyl

The catalytic effect of 2,2,5,5-tetramethyl-4-phenyl-3-imidazoline-3-oxide-1-oxyl on the oxidation of 2-isopropyl-1,3-dioxolane, 2-phenyl-1,3-dioxolane, 2-phenyl-4-chlormethyl-1,3-dioxolane, 2-isopropyl-1,3-dioxane, 2-isopropyl-4-methyl-1,3-dioxane, 2-phenyl-1,3-dioxane, 2-phenyl-4-methyl-1,3-dioxane with oxone and potassium persulfate is reported. The corresponding glycol monoesters were obtained with yields of 90-100%.     

Theoretical and spectroscopic study of 2-substituted indan-1,3-diones: a coherent picture of the tautomeric equilibrium

The structures of some 2-substituted indan-1,3-diones are investigated in the gas phase and solution using quantum chemical calculations and spectral (NMR, IR, and UV) measurements. The influence of the substituent at the 2-position on the tautomeric equilibrium of 2-substituted indan-1,3-diones in solvents with different polarity is evaluated. It is shown that the equilibrium in 2-formyl-indan-1,3-dione and 2-acetyl-indan-1,3-dione is shifted to the 2-hydroxyalkylidene-indan-1,3-dione tautomer, while 2-carboxyamide-indan-1,3-dione exists as a mixture of two tautomers, 2-(hydroxyaminomethylidene)-indan-1,3-dione and 2-carboamide-1-hydroxy-3-oxo-indan, with extremely fast proton transfer between them. The situation for 2-carboxy-indan-1,3-dione is quite different - on the basis of the analysis of the obtained results, the possible existence of an anionic form of 2-carboxy-indan-1,3-dione in solution can be inferred.     

A convenient one-pot synthesis of substituted 2-pyrone derivatives

2-Pyrone derivatives were prepared in a one step procedure from readily available (chlorocarbonyl)phenyl ketene and 1,3-diketones such as 2,4-pentanedione, 1,3-diphenyl-1,3-propanedione, 1-phenyl-1,3-butanedione, 1,3-cyclohexanedione, 5,5-dimethyl-1,3-cyclohexanedione, 1,3-dimethyl-pyrimidine-2,4,6-trione and ethyl 2,4-dioxopentanoate. A mechanism is presented to account for the formation of the products. This method provides an easy route to prepare 3,4,5,6-tetrasubstituted 2-pyrones in good to excellent yields and in a short experimental time.     

Reactions of selenium dichloride and dibromide with divinyl selenide: synthesis of novel selenium heterocycles and rearrangement of 2,6-dihalo-1,4-diselenanes

The synthesis of novel selenium heterocycles, 2,6-dihalo-1,4-diselenanes, 4-halo-2-halomethyl-1,3-diselenolanes and 2-halomethyl-1,3-diselenoles, based on the reactions of selenium dichloride and dibromide with divinyl selenide is described. The spontaneous rearrangement of 2,6-dihalo-1,4-diselenanes to 4-halo-2-halomethyl-1,3-diselenolanes is observed. Distillation of 4-chloro-2-chloromethyl-1,3-diselenolane leads to regioselective dehydrochlorination and the formation of 2-chloromethyl-1,3-diselenole.     

Selenium heterocycles. XXXI. Reaction of ethyl propiolate with 5-phenyl-2-thioxo-1,3-thiaselenole and 4-phenyl-2-thioxo-1,3-dithiole

Reaction of ethyl propiolate with 4-phenyl-2-thioxo-1,3-dithiole afforded 4-carbethoxy-2-thioxo-1,3-dithiole in high yield. Reaction of ethyl propiolate with 5-phenyl-2-thioxo-1,3-thiaselenole gave 4-carbethoxy-2-thioxo-1,3-thiaselenone (IX), 4-carbethoxy-2-selenoxo-1,3-dithiole (X) and 5-carbethoxy-2-thioxo-1,3-thiaselenole (XI). A possible mechanism for the formation of these compounds is given.     

沸石咪唑酯骨架结构材料ZIF-71用于低浓度生物基2，3-丁二醇/1，3-丙二醇的吸附分离性能

1,3-丙二醇是一种重要的化工原料,生物发酵法生产1,3-丙二醇往往会产生副产物2,3-丁二醇,限制了生物基1,3-丙二醇的进一步工业化应用。1,3-丙二醇与2,3-丁二醇亲水性强,导致其在低浓度发酵液中分离困难。基于2,3-丁二醇比1,3-丙二醇具有长的碳链和大的极化率,本文采用含有―Cl基团（憎水且具有大的极化率）的ZIF-71吸附分离水中低浓度的2,3-丁二醇/1,3-丙二醇。结果表明,ZIF-71对双组分2,3-丁二醇/1,3-丙二醇（50 g/L,50 g/L）中2,3-丁二醇的静态竞争吸附容量为123.6 mg/g,对2,3-丁二醇/1,3-丙二醇分离选择性高达7.6,分离效果优于沸石材料Beta。在3次循环吸附-解吸实验中ZIF-71依旧保持着稳定的结构和对2,3-丁二醇的选择性吸附能力。通过分子模拟,揭示了ZIF-71对1,3-丙二醇和2,3-丁二醇的吸附分离机制。ZIF-71与1,3-丙二醇之间主要通过弱的范德华力作用;而ZIF-71与2,3-丁二醇之间则是通过强的范德华力与弱的氢键协同作用,从而对2,3-丁二醇产生选择性吸附。可以看出, ZIFs材料有望成为选择性吸附分离低浓度副产物2,3-丁二醇的吸附剂,推动生物法制1,3-丙二醇的工业化发展。     

Adsorption of 1,3‐Benzenedithiol and 1,3‐Benzenedimethanethiol on Gold Surfaces

The adsorption characteristics of 1,3‐benzenedithiol (1,3‐BDT) and 1,3‐benzenedimethanethiol (1,3‐BDMT) on Au surfaces are investigated by means of surface‐enhanced Raman scattering, UV/Vis absorption spectroscopy, and cyclic voltammetry (CV). 1,3‐BDMT is found to adsorb via two S–Au linkages at concentrations below monolayer coverage, but to have an upright geometry as the concentration increases on Au nanoparticles. On the other hand, 1,3‐BDT is found to adsorb by forming two S–Au linkages, regardless of concentration, based on the disappearance of the ν(SH)_free stretching band. Because of the absence of the methylene unit, 1,3‐BDT appeares not to self‐assemble efficiently on Au surfaces. The UV/Vis absorption spectroscopy and CV techniques are also applied to check the formation of self‐assembled monolayers of 1,3‐BDT and 1,3‐BDMT on Au. Density functional theory calculations based on a simple adsorption model using an Au₈ cluster are performed to better understand the nature of the adsorption characteristics of 1,3‐BDT and 1,3‐BDMT on Au surfaces.     

3(1,3-Heterazolidin-3-yl-methyl)-1,3-oxazolidines and their reduction with borane–THF

Preparation of bis-heterazolidines bonded by a CH₂, CH₂–S–CH₂ or CH₂SCH₂SCH₂ groups through their nitrogen atoms is reported: 3-(1,3-oxazolidin-3-ylmethyl)-1,3-oxazolidine 1, 3-(4,4-dimethyl-1,3-oxazolidin-3-ylmethyl)-1,3-oxazolidine 2, 3-(1,3-diazolidin-3-ylmethyl)-1,3-diazolidine 3, 3-(1,3-thiazolidin-3-ylmethyl)-1,3-thiazolidine 4, 3-(1,3-thiazolidin-3-ylmethylsulfanylmethyl)-1,3-thiazolidine 5 and 3-(1,3-oxazolidin-3-ylmethylsulfanylmethyl-sulfanylmethyl)-1,3-oxazolidine 6. The solid state structures of 4 and 5 were determined by X-ray diffraction analyses. BH₃–THF reduction reactions of compounds 1–6 were investigated. N→BH₃ mono- and di-adducts of 1–6 were prepared and their structures calculated (ab initio 3-21G*).     

Chiral Ketene Equivalents for Use in Asymmetric Synthesis

Abstract

Trans-1,3-dithiolane-1,3-dioxide is a more reactive and more selective chiral ketene equivalent than trans-1,3-dithiane-1,3-dioxide.     

Dual Mechanism of Enamine-enamine Rearrangement of 1,3-diaryl-3-(1-imidazolyl)propen-2-ones

The formation of 1,3-diaryl-3-(1-imidazolyl)propen-1,3-diol that is an intermediate of enamine-enamine rearrangement of 1,3-diaryl-3-(1-imidazolyl)propen-1-ones constitutes the key stage of the dual mechanism of the rearrangement proper. The reaction of 1,3-diaryl-2,3-dibromopropan-1-ones with a primary amine provides 1,3-diaryl-3-iminopropan-1-ones as a result of enamine-imine prototropic rearrangement.     

A theoretical exploration of the 1,3-dipolar cycloadditions onto the sidewalls of (n,n) armchair single-wall carbon nanotubes

The viability of 1,3-dipolar cycloadditions of a series of 1,3-dipolar molecules (azomethine ylide, ozone, nitrone, nitrile imine, nitrile ylide, nitrile oxide, diazomethane, and methyl azide) onto the sidewalls of carbon nanotubes has been assessed theoretically by means of a two-layered ONIOM approach. The theoretical calculations predict the following: (i) other than the 18-valence-electron azomethine ylide and ozone, the 16-valence-electron nitrile ylide and nitrile imine are the best candidates for experimentalists to try; (ii) upon 1,3-dipolar cycloaddition, a 1,3-diople molecule is di-sigma-bonded to a pair of carbon atoms on the sidewall of SWNT, forming a five-membered ring surface species; (iii) the as-formed 1,3-dipole-SWNT bonding is much weaker than that in the products of the molecular 1,3-DC reactions and can be plausibly broken by heating at elevated temperatures; (iv) the sidewalls of the armchair (n,n) SWNTs (n = 5-10) are subject to the 1,3-DCs of ozone and azomethine ylides; (v) both the 1,3-DC reactivity and retro-1,3-DC reactivity are moderately dependent on the diameters of SWNTs, implying the feasibility of making use of the heterogeneous 1,3-DC chemistry to purify and separate SWNTs diameter-specifically.     

Stereocontrolled 1,3-phosphatyloxy and 1,3-halogen migration relay toward highly functionalized 1,3-dienes

A double migratory cascade reaction of α-halogen-substituted propargylic phosphates to produce highly functionalized 1,3-dienes has been developed. This transformation features 1,3-phosphatyloxy group migration followed by 1,3-shifts of bromine and chlorine as well as the unprecedented 1,3-migration of iodine. The reaction is stereodivergent: (Z)-1,3-dienes are formed in the presence of a copper catalyst, whereas gold-catalyzed reactions exhibit inverted stereoselectivity, producing the corresponding E products.     

Zur Synthese sulfonierter Derivate von 4-Amino-1,3-dimethylbenzol und 2-Amino-1,3-dimethylbenzol

Syntheses of Sulfonated Derivatives of 4-Amino-1, 3-dimethylbenzene and 2-Amino-1, 3-dimethylbenzene Direct sulfonation of 4-amino-1, 3-dimethylbenzene (1) and sulfonation of 4-nitro-1,3-dimethylbenzene ( 4 ) to 4-nitro-1,3-dimethylbenzene-6-sulfonic acid ( 3 ) followed by reduction yield 4-amino-1,3-dimethylbenzene-6-sulfonic acid ( 2 ). The isomeric 5-sulfonic acid ( 5 ) however is prepared solely by baking the acid sulfate salt of 1 . Reaction of sulfur dioxide with the diazonium chloride derived from 2-amino-4-nitro-1,3-dimethylbenzene ( 7 ) leads to 4-nitro-1,3-dimethylbenzene-2-sulfonyl chloride ( 8 ), which is successively hydrolyzed to 4-nitro-1,3-dimethylbenzene-2-sulfonic acid ( 9 ) and reduced to 4-amino-1, 3-dimethylbenzene-2-sulfonic acid ( 6 ). Treatment of 4-amino-6-bromo-1,3-dimethylbenzene ( 12 ) and 4-amino-6-chloro-1, 3-dimethylbenzene ( 13 ), the former obtained by reduction of 4-chloro-6-nitro-1,3-dimethyl-benzene ( 10 ) and the latter from 4-chloro-6-nitro-1, 3-dimethylbenzene ( 11 ), with oleum yield 4-amino-6-bromo-1,3-dimethylbenzene-2-sulfonic acid ( 14 ) and 4-amino-6-chloro-1,3-dimethylbenzene-2-sulfonic acid ( 15 ) respectively; subsequent carbon-halogen hydrogenolyses of 14 and 15 lead also to 6 (Scheme 1). Baking the acid sulfate salt of 2-amino-1, 3-dimethylbenzene ( 17 ) gives 2-amino-1, 3-dimethylbenzene-5-sulfonic acid ( 16 ), whereas the isomeric 4-sulfonic acid ( 18 ) can be prepared by either of the following three possible pathways: Sulfonation of 2-nitro-1,3-dimethylbenzene ( 20 ) to 2-nitro-1,3-dimethylbenzene-4-sulfonic acid ( 21 ) followed by reduction or sulfonation of 2-acetylamino-1,3-dimethylbenzene ( 19 ) to 2-acetylamino-1,3-dimethylbenzene-4-sulfonic acid ( 22 ) with subsequent hydrolysis or direct sulfonation of 17 . Further sulfonation of 18 yields 2-amino 1,3-dimethylbenzene-4,6-disulfonic acid ( 23 ), the structure of which is independently confirmed by reduction of unequivocally prepared 2-nitro- 1,:3-dimethylbenzene-4,6-disulfonic acid ( 24 )(Scheme 2).     

Acetalation and Ketalation Catalyzed by SO42-/TiO2-MoO3

The catalytic activities of SO42-/TiO2-MoO3 in synthesizing cyclohexanone ethylene ketal,cyclohexanone 1,2-propanediol ketal, 2-propyl-1,3-dioxolane, 4-methyl-2-isopropyl-1,3-dioxolane,2-isopropyl-1,3-dioxolane, 4-methyl-2-isopropyl-1,3-dioxolane, butanone ethy-lene ketal and butanone 1,2-propanediol ketal were reported. It has been demonstrated that SO42-/TiO2-MoO3 is an excellent catalyst. Various factors concerned in this reaction have been investigated. The optimum conditions have been found, that is, the molar ratio of aldehyde/ketone to alcohol was 1:1.5 or 1:1.3,the mass ratio of the catalyst used to the reactants was 0.25～1.5%, and the reaction time was 45～60 min. Under this conditions, the yield of cyclohexanone ethylene ketal is 82.7%, cyclohexanone 1,2-propanediol ketal is 83.4%, the yield of 2-propyl-1,3-dioxolane is 68.1%,4-methyl-2-isopropyl-1,3-dioxolane is 87.5%, the yield of 2-isopropyl-1,3-dioxolane is 70.7%,4-methyl-2-isopropyl-1,3-dioxolane is 82.5%, the yield of butanone ethylene ketal is 74.1%, and butanone 1,2-propanediol ketal is 94.9%.Some equation and experiment results concerned of the synthetic acetals or ketals were listed as follows.     

A 1,3-dihydro-1,3-azaborine debuts

We present the first synthesis and characterization of a 1,3-dihydro-1,3-azaborine, a long-sought BN isostere of benzene. 1,3-Dihydro-1,3-azaborine is a stable structural motif with considerable aromatic character as evidenced by structural analysis and its reaction chemistry. Single crystal X-ray analysis indicates bonding consistent with significant electron delocalization. 1,3-Dihydro-1,3-azaborines also undergo nucleophilic substitutions at boron and electrophilic aromatic substitution reactions. In view of the versatility and impact of aromatic compounds in the biomedical field and in materials science, the present study further expands the available chemical space of arenes via BN/CC isosterism.     

Synthesis of 1-Bromo-3-butyn-2-one and 1,3-Dibromo-3-buten-2-one

Synthetic procedures for the preparation of 1-bromo-3-butyn-2-one and 1,3-dibromo-3-buten-2-one are given. These compounds are prepared from 2-bromomethyl-2-vinyl-1,3-dioxolane, which can readily be prepared from 2-ethyl- 2-methyl-1,3-dioxolane. The synthetic routes are as follows: 2-bromomethyl-2-vinyl-1,3-dioxolane is converted to 2-(1,2-dibromoethyl)-2-bromomethyl-1,3-dioxolane. Double dehydrobromination with ^tBuOK affords 2-ethynyl-2-bromomethyl-1,3-dioxolane. Formolysis with formic acid gives 1-bromo-3-butyn-2-one. Deacetalized 2-bromoethyl-2-vinyl-1,3-dioxolane was treated with Br₂ and Li₂CO₃/12-crown-4 in tetrahydrofuran to give 1,3-dibrom-3-buten-2-one in moderate yield.     

Reductive cleavage of ether and thioether bonds on 1,3-benzodioxole and 1,3-benzoxathiole derivatives

The reaction of lithium and sodium diethylamide with 1,3-benzodioxoles and 1,3-benzoxathioles is here reported. 1,3-Benzodioxoles exhibit selective cleavage of the ether bond with formation of alkoxyphenols; 1,3-benzoxathioles when reacting with sodium diethylamide lead to 2-alkoxybenzenethiols while with lithium diethylamide give 2-alkoxybenzenethiols together with 2-(alkylthio)phenols.     

Solid-state structures of 2-(4-hydroxyphenyl)-substituted phenalene-1,3-dione and indan-1,3-dione

The structure of 2-(4-hydroxyphenyl)-substituted indan-1,3-dione and phenalene-1,3-dione is investigated using a combination of solid-state NMR, single crystal X-ray analyses and quantum chemical calculations. It is shown that 2-(4-hydroxyphenyl)-1,3-indandione exists as a diketo tautomer while 2-(4-hydroxyphenyl)-1,3-phenalenedione exists in the enol form.     

Globo H四糖衍生物的高效合成

设计合成了2个Globo H四糖衍生物1和2, 将其作为标准样品可用于研究β1,3-葡萄糖醛酸(GlcA)转移酶及GlcA-3-O-硫酸化(Sulfo)转移酶在肿瘤组织内的特异性表达.