Direct determination of iron in ferritin using the polarographic catalytic current

A new method for the determination of iron in ferritin using the polarographic catalytic current has been developed. Iron is released in NaOH and triethanolamine (TEA) solution and subsequently determined based on the polarographic catalytic wave in the presence of bromate with the peak potential of –1.0 V (vs.SCE). The 2.5-derivative peak height of iron is linearly proportional to its concentration in the range of 8.0 × 10^–8–1.0 × 10^–6 g/ml with a correlation coefficient of 0.9991. The method has been applied to the determination of iron in human fetal liver and horse-spleen ferritin and the recovery is 95–112%.     

Separation of traces of heavy metals from an iron matrix by use of an emulsion liquid membrane

An emulsion liquid membrane method has been developed for separating traces of heavy metals from an iron matrix. A 1.0-mL volume of aqueous iron(III) solution (pH 2.0) was emulsified with a mixture of 0.6 mL toluene, 2.4 mL n -heptane, and 80 mg sorbitan monooleate (Span-80). The resulting water-in-oil type emulsion was gradually injected into 25 mL of 1.5 mol L^–1 hydrochloric acid solution containing 30 mmol L^–1 8-quinolinol and 1.0 mol L^–1 of ammonium sulfate and was dispersed as numerous tiny globules by stirring for 40 min. More than 90% of the iron(III) diffused through the oil layer to the external hydrochloric acid solution with the aid of complexation with 8-quinolinol, whereas trace heavy metals, e.g. Cr(III), Mn(II), Co(II), Ni(II), Cu(II), and Pb(II), remained quantitatively in the internal aqueous phase. After collecting the dispersed emulsion globules, they were demulsified and trace metals in the segregated aqueous phase were determined by graphite-furnace atomic absorption spectrometry. Owing to sufficient removal of the iron matrix trace metal impurities in high-purity iron were successfully determined without interference, as was confirmed by analysis of certified reference materials.     

Analysis of drugs by AAS via formation of ion pairs

A new procedure for determining nitrogenated bases by forming ion pairs with Fe(SCN)6^3– is studied. The method consists of extracting the ion pair formed by a nitrogenated base and the inorganic complex Fe(SCN)6^3– into an organic phase, and measuring the iron in the organic phase by AAS at 248.3 nm. The optimal experimental conditions for determining amylocaine, avacan, bromhexine, diphenhydramine and papaverine are studied. The organic phase used is 1,2-dichloroethane. The standard deviation of the method varies between 10^–1 and 10^–2. The interferences produced by various substances are studied.     

Preparation of α-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> by thermal hydrolysis of iron(III) basic sulfate

Features of the hydrolytic transformation of iron(III) basic sulfate under hydrothermal conditions at 140–200°C were studied. The influence of the conditions of the hydrothermal treatment of iron(III) basic sulfate on the rate and degree of its hydrolysis was examined. The chemical and phase composition of metastable intermediates was ascertained, and conditions for the formation of the final product of thermal hydrolysis, hematite of high phase purity, were determined.Translated from Zhurnal Prikladnoi Khimii, Vol. 77, No. 9, 2004, pp. 1416–1420.Original Russian Text Copyright © 2004 by Eshchenko, Salonikov.     

Application of a thermogravimetric technique for the determination of low nitrogen solubilities in metals: Using iron as an example

A thermogravimetric technique was explored in order to precisely investigate the low nitrogen solubilities in metals. The thermogravimetry (TG) set-up is presented in detail. By the optimization of the set-up, a good baseline (noise level <2 μg, curve drift: ±1–4 μg/h) was obtained. The measurements of nitrogen solubility in iron are described. The weight signal arising from the nitrogen dissolved in iron was recorded continuously as a function of time under various experimental conditions. The nitrogen solubility can be calculated from the weight change between the beginning of nitrogen introduction and the steady state (equilibrium). There is a good agreement between the present measurements and the data in the literature determined by alternative methods such as chemical analyses of quenched samples, Sieverts’ method as well as thermogravimetric technique. In addition, a so-called isothermal stepping TG process shows that the TG set-up has a sufficient sensitivity to display the effect of the phase transformation of iron from body-centered cubic phase to face-centered cubic phase on the nitrogen solubility.     

Kinetics of iron(III) bromide extraction with n-tributyl phosphate

The equilibrium and rate of solvent extraction of FeBr₂ complexes from HBr solutions into benzene solutions of tributyl phosphate (TBP) have been investigated. It is found that two reactions control the iron(III)-TBP extraction from hydrobromic acid solutions. From HBr activity of 1.2–1.55 (molarity based) the reaction is inverse third order with respect to the aqueous phase acidity. From HBr activity of 1.7–6 (molarity based) the reaction is first order in HBr concentration in the aqueous phase. Both of these reactions are first order for both Fe(III) and TBP. The rate constants for these reactions were calculated and the rate-controlling steps are discussed.     

The mutual catalytic effect in kinetic reactions and its application to simultaneous determination of binary components

The mutual catalytic effect between iron(II) and antimony(III) on the chromium(VI)-iodide kinetic reactions has been studied by stopped-flow FIA. The concept of mutual catalytic coefficient is defined. The deviations from additive principles of absorbance within certain concentration ranges in previous procedures can be compensated effectively, by introducing the mutual catalytic coefficient into the simultaneous determination of a binary mixture with stopped-flow-FIA method. The linear concentration ranges have been enlarged, 0–3.5 g/ml Fe(II) and 0–3.7 g/ml Sb(III) compared with 0–1.2 g/ml Fe(II) and 0–2.0 g/ml Sb(III) without use of the coefficient. Iron and antimony contents in wastewater, a simulated sample and a zinc standard were determined, the recoveries and relative standard deviations being, respectively, 99.8–101.3% and 2.7–3.6% for iron and 95.4–100.3% and 2.3–5.3% for antimony compared with 95.2–98% and 3.0–4% for iron and 96–104% and 4.5–4.8% for antimony, assuming additivity.     

Spectrophotometric determination of iron after separation of its 9,10-phenanthrenequinone monoximate on microcrystalline naphthalene

A sensitive and selective spectrophotometric method has been developed for the determination of iron as Fe(II) or Fe(III) using 9,10-phenanthrenequinone monoxime (PQM) as the complexing agent. Fe(II) and Fe(III) react with PQM to form coloured water insoluble complexes which can be adsorbed on microcrystalline naphthalene in the pH ranges 3.7–6.2 and 2.0–8.4, respectively. The solid mass consisting of the metal complex and naphthalene is dissolved in DMF and the metal determined spectrophotometrically by measuring the absorbances Fe(II) at 745 nm and Fe(III) at 425 nm. Beer's law is obeyed over the concentration range 0.5–20.0 g of iron(II) and 20–170.0 g of Fe(III) in 10 ml of DMF solution. The molar absorptivities are 1.333 × 10⁴ 1 · mole^–1 · cm^–1 for Fe(II) and 2.428 × 10³1· mole^–1 · cm^–1 for Fe(III). The precision of determination is better than 1%. The interference of various ions has been studied and the method has been employed for the determination of iron in various standard reference alloys, bears, wines, ferrous gluconate, human hair and environmental samples.     

Photo-Oxidation of phenosafranine and neutral red in the presence of iron(III): Determination of trace amounts of iron and phosphate

Summary Phenosafranine (Ph) and Neutral Red (NR) in the presence of iron(III) are decolorized by illumination with light of wavelength shorter than 360 nm. The decolorization mechanism involves ·OH radicals, formed during the photo-excitation of hydrolysed iron(III) species. In the presence of oxygen, iron(III) acts as a catalyst in the photochemical process. The photo-oxidation of Ph and NR is followed by measuring the decrease in absorbance of the dyes, and linear calibration graphs in the range 1–11 ppm of iron are obtained. The decrease in the fluorescence of phenosafranine has also been used to measure the photo-oxidation of this dye, and is linearly related to iron concentration in the range 0.1–1.1 ppm. Phosphate strongly inhibits the iron(III)-catalysed photodecolorization and this can be made the basis of a method for its determination (concentration limit 1×10^–5 M).

---

Photooxydation von Phenosafranin und Neutralrot in Gegenwart von Eisen(III): Bestimmung von Spuren Eisen und Phosphat

Zusammenfassung Phenosafranin (Ph) und Neutralrot (NR) werden in Gegenwart von Fe(III) durch Belichtung unter 360 nm entfärbt. Der Mechanismus dieses Vorgangs erfordert die Gegenwart von OH-Radikalen, die sich bei Belichtung von hydrolysierten Fe(III)-Verbindungen bilden. In Gegenwart von Sauerstoff wirkt Fe(III) als Katalysator der photochemischen Reaktion. Die Photooxydation von Ph und NR läßt sich durch Abnahme der Absorbanz der beiden Farbstoffe verfolgen. Dabei ergeben sich lineare Eichkurven für 1–11 ppm Fe. Die Abnahme der Fluoreszenz von Ph dient ebenfalls zur Messung der Photooxydation dieses Farbstoffes und verläuft für 0,1–1,1 ppm Fe linear. Phosphat hindert die Fe(III)-katalysierte Photoentfärbung, was als Grundlage für die Phosphatbestimmung bis zu 1×10^–5 M dienen kann.

     

Redox chemistry of [Fe2(CN)10]4−. Part 5. Reaction with thiourea

The reaction of the dimeric iron(III) complex [Fe2(CN)10]4– with a large excess of thiourea, tu, takes place in a series of stages, the first two of which have been examined in detail. The first stage is a one equivalent outer sphere electron transfer to form [Fe2– (CN)10]5– and the radical cation tu+· which dimerises to form the disulfide tu22+. There is kinetic evidence for the formation of a significant proportion of a precursor complex [Fe2(CN)10]4–·tu at high concentrations of tu. The second stage involves cleavage of the mixed valence dimer to yield [Fe(CN)5tu]2– and [Fe(CN)5H2O]3–. On standing, substitution of H2O by tu and oxidation by air occurs slowly, and finally all of the original iron is observed as [Fe(CN)5tu]2–.     

Determination of traces of iron with the catalytic maximum wave in differential pulse polarography

Summary A differential pulse polarographic method for the determination of iron employing the catalytic maximum wave has been studied. A well-defined differential pulse polarographic peak for iron(III) in Britton-Robinson buffer solution containing 50 mol/l N-(2-hydroxyethyl) ethylenediamine N,N,N-triacetic acid (HEDTA) and 5 mmol/l KBrO₃ is observed in the potential range from +0.2 to –0.3 V vs. SCE. The peak current is very large compared to that of the Fe(III)/EDTA complex, being proportional to the concentration of iron(III) between 1.00×10^–8 and 3.58×10^–6 mol/l under optimum conditions. The relative standard deviations for 3.58×10^–7 mol/l and 1.79×10^–6 mol/l iron(III) were 1.38 and 0.54%, respectively (n=5), and the calculated detection limit was 5.2×10^–9 mol/l iron(III). The method has been applied to the determination of iron in fresh snow and rain waters.

---

Spurenbestimmung von Eisen mit Hilfe der katalytischen Maximumsstufe in der Differential-Puls-Polarographie

Zusammenfassung Das Verfahren beruht auf der Tatsache, daß in Britton-Robinson-Puffer (mit 50 mol/l HEDTA und 5 mmol/l KBrO₃) im Potentialbereich von +0,2 bis –0,3 V gegen SKE ein gut definierter puls-polarographischer Peak für Eisen(III) auftritt. Der Peakstrom ist im Vergleich zu dem des Fe(III)/EDTA-Komplexes sehr groß und ist unter optimalen Bedingungen im Konzentrationsbereich von 1,00·10^–8 bis 3,58·10^–6 mol/l der Eisen(III)-Konzentration proportional. Die relative Standardabweichung beträgt 1,38% bzw. 0,54% (n=5) für 3,58·10^–7 mol/l bzw. 1,79·10^–6 mol/l Fe(III). Die berechnete Nachweisgrenze liegt bei 5,2·10^–9 mol/l Fe(III). Das Verfahren wurde zur Eisenbestimmung in Schnee- und Regenwasser eingesetzt.

---

---

This work was supported in part by a Grant-in-Aid for Scientific Research from Hokkaido-prefecture, 1982.     

Kinetics of the Dissolution of Silver in Thiocarbamide Solutions

The dependence of the rate of solution of silver on the pH of the solution, the ratio of the iron(III) and thiocarbamide concentrations, and the temperature has been determined. The rate constants for the solution of silver (k _i = 2.3·10^–4 to 9.6·10^–4s^–1) at temperatures from 283-298 K have been calculated and from the temperature dependence of the rate constant the activation energies have been calculated: 68.84 kJ/mol for kinetic control of the rate of solution and 26.06 kJ/mol in the adsorption inhibition region.     

Simultaneous anodic stripping voltammetric determination of lead and cadmium with a carbon paste electrode modified by tributyl phosphate

A novel chemiluminescence (CL) flow sensor has been developed for the monitoring of iron(III). The analytical reagents involved in the CL reaction, including luminol and hexacyanoferrate(II) were both immobilized on an anion-exchange resin column. When sodium sulfate solution was passed through the column, these two reagents were eluted from the resins and then mixed with an iron(III) stream. By the fast reaction between iron(III) and hexacyanoferrate(II), the complex Prussian Blue was generated, which could catalyse the luminol oxidation by dissolved oxygen in alkaline aqueous solution to produce CL. The CL emission intensity was correlated with the standard iron(III) concentration in the range 0.01-Smgl^–1, and the detection limit was 7 × 10^–3mgl^–1 iron(III). A complete analysis, including sampling and washing, could be performed in l min with a relative standard deviation of less than 5%. The sensor was stable for over 200 times and has been applied successfully to the determination of iron in blood samples.     

Studies on intermolecular interactions of metal chelate complexes. Part X. Interactions of metal chelates with ozone

Summary The interactions of more than forty metal chelate complexes, dithiocarbamates, dithiophosphates and acetylacetonates, with ozone are studied in homogeneous phase and the stoichiometry and the rate constants of the reactions estimated. Most powerful ozone deactivators are nickel(II) and copper(II) dithiocarbamate and dithiophosphate complexes interacting with 6.5 moles ozone per mole of the ligand with rate constant >0⁶m · I^–1 · s^–1. The remote ligand substituents do not influence the reaction parameters. Other sulphur-containing complexes of iron(III), cobalt(II), cobalt(III), zinc(II), manganese(III), bismuth(III), antimony(III), arsenic(III), cadmium(II), platinum(II), palladium(II) and chromium(III) deactivate 3–4 moles ozone per mole ligand with rate constants of 10²–10⁴ m · I^–1 · s^–1. Acetylacetonate complexes of copper(II), nickel(II), cobalt(III), iron(III), chromium (III), and oxovanadium(II) deactivate 1–3 moles ozone per mole ligand with a rate constant of 10–10⁴ m · I^–1 · s^–1. Using e.p.r. and electronic spectra, some intermediate products are detected and the mechanism of the reaction is discussed. The reported data are compared with other widely used antiozonants and the metal chelates are shown to have several advantages.     

Mass spectrometric diagnosis of the surface nitriding mechanism in a d.c. glow discharge

Reactive constituents have been investigated in a molecular beam generated in the cathode surface glow area and surface boundary layer. Mixtures of nitrogen and hydrogen form NH_x(x=0–4) compounds, which are of relevance in heterogeneous, plasma vs. metal nitriding reactions. Ammonia decomposition leads to NH_x(x=2–4). Strong cataphoretic enrichment of hydrogen has been observed in the cathode glow area. Heterogeneous reactions of NH_x with iron lead to the formation of iron nitrides via intermediates such as FeNH_2–3. In a pulsed d.c. glow discharge, increased sputtering and decreased hydrogen enrichment have been observed.     

A new method for the spectrophotometric determination of pertechnetate with tris(1,10-phenanthroline)iron(II) ion

A new spectrophotometric determination of technetium has been developed by means of the solvent extraction of tris(1,10-phenanthroline)iron(II) ([Fe(phen)₃ ²⁺]) with pertechnetate into nitrobenzene. The concentration of technetium can be determined by measuring the characteristic absorbance at 516 nm (=11,700M^–1·cm^–1) in the organic phase. An important feature of the proposed method is that the concentration of pertechnetate can be determined without complicated processes such as the reduction of pertechnetate and the subsequent formation of a colored chelate.     

Production of levulinic acid from wood raw material in the presence of sulfuric acid and its salts

The catalytic activities of sulfuric acid and of cobalt(II), iron(III), and aluminum sulfates in the thermal splitting of the cellulose and wood of various species in the presence of superheated steam at 250–350°C under flow conditions and at 150–250°C under autoclave conditions have been studied. The yield of levulinic acid from cellulose reaches 35 wt-% and from wood 16.0–18.0 wt-%.Spruce, according to Table 3 and the experimental part-Translator.Institute of the Chemistry of Natural Organic Raw Material, Siberian Division, Russian Academy of Sciences, Krasnoyarsk, fax (3912) 43 93 42. Translated from Khimiya Prirodnykh Soedinenii, No. 2, pp. 226–230, March–April, 1998.     

Simultaneous determination of ferric, ferrous and total iron by extraction differential pulse polarography: application to the speciation of iron in rocks

The voltammetric characteristics of Fe(III) oxinate at a mercury electrode, in the presence of 0.2 M tributylammonium perchlorate (tri-BAP) and 0.2 M tributylamine (tri-BA) as the supporting electrolyte have been studied in chloroform. With this supporting electrolyte a two electron quasi-reversible process for the reduction of Fe(III) oxinate was observed. Preceded by a solvent extraction of Fe(III) oxinate in chloroform, differential pulse polarography (DP) was used for the determination of iron. The calibration graph was linear over the concentration range 0.5–50 μM Fe(III) oxinate in chloroform and the detection limit was 1.5 μM. The proposed DP method has been used for the determination of ferric, ferrous and total iron in a mixture and successfully applied to the speciation of iron in rocks.     

Extraction-spectrophotometric determination of iron with 1,2,4,6-tetraphenylpyridinium perchlorate

Summary In 7M hydrochloric acid medium, iron(III) forms an ion-association compound with 1,2,4,6-tetraphenylpyridinium perchlorate (TPPP) which is extractable into isoamyl acetate. The extracted ionpair, which has an Fe: TPPP mole ratio of 11, is used for the spectrophotometric determination of iron (=3.10×10⁴l·mole^–1· cm^–1) in the concentration range 0.1–1.5g/ml in the organic phase. The interference of a number of foreign ions has been investigated. The method is applicable to the determination of iron in various materials.     

Formation of Carbon Filaments from 1,3-Butadiene on Fe/Al2O3 Catalysts

The formation of carbon filaments with different crystallographic and morphological characteristics in the course of 1,3-butadiene decomposition on Fe/Al₂O₃ catalysts at low (500–600°C) and high (700–800°C) temperatures was considered in terms of a carbide cycle mechanism. The conditions of formation and decomposition of an iron carbide phase in the course of formation of graphite nanotubes in the low-temperature region were studied.