Elastic and thermodynamic properties of CaB6 under pressure from first principles

The elastic and thermodynamic properties of CsCl-type structure CaB₆ under high pressure are investigated by first-principles calculations based on plane-wave pseudopotential density functional theory method within the generalized gradient approximation (GGA). The calculated lattice parameters of CaB₆ under zero pressure and zero temperature are in good agreement with the existing experimental data and other theoretical data. The pressure dependences of the elastic constants, bulk modulus B (GPa), and its pressure derivative B′, shear modulus G, Young's modulus E, elastic Debye temperature Θ_B, Zener's anisotropy parameter A, Poisson ratios σ, and Kleinmann parameter ζ are also presented. An analysis for the calculated elastic constants has been made to reveal the mechanical stability of CaB₆ up to 100 GPa. The thermodynamic properties of the CsCl-type structure CaB₆ are predicted using the quasi-harmonic Debye model. The pressure-volume-temperature (P-V-T) relationship, the variations of the heat capacity C_V, Debye temperature Θ_D, and the thermal expansion α with pressure P and temperature T, as well as the Grüneisen parameters γ are obtained systematically in the ranges of 0-100 GPa and 0-2000 K.     

First-principles study of elastic and electronic properties of layered ternary nitride SrZrN2 under pressure

The structural, elastic, and electronic properties of SrZrN₂ under pressure up to 100?GPa have been carried out with first-principles calculations based on density functional theory. The calculated lattice parameters at 0?GPa and 0?K by using the GGA-PW91-ultrasoft method are in good agreement with the available experimental data and other previous theoretical calculations. The pressure dependence of the elastic constants and the elastic-dependent properties of SrZrN₂, such as bulk modulus B, shear modulus G, Young's modulus E, Debye temperature Θ, shear and longitudinal wave velocity V_S and V_L, are also successfully obtained. It is found that all elastic constants increase monotonically with pressure. When the pressure increases up to 140?GPa, the obtained elastic constants do not satisfy the mechanical stability criteria and a phase transition might has occurred. Moreover, the anisotropy of the directional-dependent Young's modulus and the linear compressibility under different pressures are analysed for the first time. Finally, the pressure dependence of the total and partial densities of states and the bonding property of SrZrN₂ are also investigated.     

Ab initio study of the structural,electronic, elastic and thermal conductivity properties of SrClF with pressure effects

Abstract

SrClF is an important optical crystal and can be used as pressure gauge in diamond anvil cell at high pressure. In this work, we performed a systematic study on the structural, electronic and elastic properties of SrClF under pressure, as well as its thermal conductivity, by first-principles calculation. Different exchange-correlation functionals were tested and PBESOL was finally chosen to study these properties of SrClF. Studies reveal that SrClF has a bulk modulus of about 56.2 GPa (by fitting equation of states) or 54.3 GPa (derived from elastic constants), which agree well with the experimental result. SrClF is mechanically and dynamically stable up to 50 GPa. Its elastic constants increase with the applied pressure, but its mechanical anisotropy deteriorates as the pressure increases. Investigation of its electronic properties reveals that SrClF is a direct band-gap insulator with a gap value of 5.73 eV at 0 GPa, which decreases with the increasing pressure and the reason is found by analysing the partial density of states. Based on the calculated phonon dispersion curves, thermal conductivity of SrClF is predicated. At ambient conditions, the predicted thermal conductivity is about 3.74 Wm^?1 K^?1, while that obtained using the simplified Slack model give a slightly larger value of 4.62 Wm^?1 K^?1.     

Pressure effects on structural,elastic and electronic properties of BaZnO2: first-principles study

The structural, elastic and electronic properties of BaZnO₂ under pressure are investigated by the plane wave pseudopotential density functional theory (DFT). The calculated lattice parameters and unit cell volume of BaZnO₂ at the ground state are in good agreement with the available experimental data and other theoretical data. The pressure dependences of elastic constants C_ij, bulk modulus B, shear modulus G, B/G, Poisson’ s ratio σ, Debye temperature Θ and aggregate acoustic velocities V_P and V_S are systematically investigated. It is shown that BaZnO₂ maintains ductile properties under the applied pressures. Analysis for the calculated elastic constants has been made to reveal the mechanical stability and mechanical anisotropy of BaZnO₂. At the ground state, the calculated compressional and shear wave velocities are 8.26 km/s and 1.81 km/s, respectively, and the Debye temperature Θ is 240.8 K. The pressure dependences of the density of states and the bonding property of BaZnO₂ are also investigated.     

First-principles investigation on vibrational,anisotropic elastic and thermodynamic properties for L12 structure of Al3Er and Al3Yb under high pressure

To better clarify the physical properties for Al₃RE precipitates, first-principles calculations are performed to investigate the vibrational, anisotropic elastic and thermodynamic properties of Al₃Er and Al₃Yb. The calculated results agree well with available experimental and theoretical ones. The vibrational properties indicate that Al₃Er and Al₃Yb will keep their dynamical stabilities with L1₂ structure up to 100 GPa. The elastic constants are satisfied with mechanical stability criteria up to the external pressure of 100 GPa. The mechanical anisotropy is predicted by anisotropic constants A^G, A^U, A^Z and 3D curved surface of Young’s modulus. The calculated results show that both Al₃Er and Al₃Yb are isotropic at zero pressure and obviously anisotropic under high pressure. Further, we systematically investigate the thermodynamic properties and provide the relationships between thermal parameters and pressure. Finally, the pressure-dependent behaviours of density of states, Mulliken charge and bond length are discussed.     

First-principles calculations of structural and thermodynamic properties of Y 3Al5O12

The pseudo-potential plane-wave method using the generalized gradient approximation (GGA) within the framework of the density functional theory is applied to study the structural and thermodynamic properties of Y ₃Al₅O₁₂. The lattice constants and bulk modulus are calculated. They keep in good agreement with other theoretical data and experimental results. The quasi-harmonic Debye model, in which the phononic effects are considered, is applied to the study of the thermodynamic properties. The temperature effect on the structural parameters, bulk modulus, thermal expansion coefficient, specific heats and Debye temperatures in the whole range from 0 to 20 GPa and temperature range from 0 to 1500 K.     

Structural,elastic, thermodynamic and electronic properties of LuX (X = N,Bi and Sb) compounds: first principles calculations

ABSTRACT

The structural, electronic, elastic and thermodynamic properties of LuX (X = N, Bi and Sb) based on rare earth into phases, Rocksalt (B1) and CsCl (B2) have been investigated using full-potential linearized muffin-tin orbital method (FP-LMTO) within density functional theory. Local density approximation (LDA) for exchange-correlation potential and local spin density approximation (LSDA) are employed. The structural parameters as lattice parameters a₀, bulk modulus B, its pressure derivate B’ and cut-off energy (E_c) within LDA and LSDA are presented. The elastic constants were derived from the stress–strain relation at 0 K. The thermodynamic properties for LuX using the quasi-harmonic Debye model are studied. The temperature and pressure variation of volume, bulk modulus, thermal expansion coefficient, heat capacities, Debye temperature and Gibbs free energy at different pressures (0–50 GPa) and temperatures (0–1600 K) are predicted. The calculated results are in accordance with other data.     

Elastic,electronic and thermal properties of topological insulator SmB6: first-principles calculations

Abstract

The pressure dependence of the structural, elastic, electronic and thermal properties of Kondo insulator SmB₆ have been systematically studied by density functional theory combined with the quasi-harmonic Debye model. The calculated structure at zero pressure is in good agreement with the available experimental results at low temperature. The obtained elastic constants, bulk modulus and shear modulus indicate that SmB₆ is mechanically stable and behaves in a brittle manner under the applied pressure 0–20 GPa, consistent with available experimental data. In addition, the elastic-relevant properties, Young’s modulus and the Poisson ratio manifest that increasing pressure results in an enhancement in the stiffness of the compound. It is found that unlike temperature, pressure has little effect on the heat capacity of SmB_6. What more important is that we observed an insulator to metal phase transition at about 5.5 GPa through the disappearance of the band gap, well consistent with the experimental data. This transition has little effect on the physical properties of SmB₆.     

高压下TiC的弹性、电子结构及热力学性质的第一性原理计算

利用基于密度泛函理论的第一性原理平面波赝势方法 并结合准谐徳拜模型研究了NaCl结构的TiC在高压下的弹性性质、电子结构和热力学性质. 计算所得零温零压下的晶格常数、体弹模量及弹性常数与实验值符合得很好. 零温下弹性常数和弹性模量随压强增大而增大. 通过态密度和电荷密度的分析, Ti-C键随压强增大而增强. 运用准谐德拜模型, 成功计算了TiC在高温高压下的体弹模量、熵、热膨胀系数、徳拜温度、 Grüneisen参数和比热容. 结果表明压强对体弹模量、热膨胀系数和徳拜温度的影响大于温度对其的影响. 热容随着压强升高而减小, 在高温高压下, 热容接近Dulong-Petit极限.     

First-principles investigations on elastic, phonon and thermodynamic properties of SrB6 under pressure

The elastic, phonon and thermodynamic properties of the divalent alkaline-earth hexaboride SrB₆ are investigated by using plane-wave pseudopotential density functional theory method. The calculated structure parameters and bulk modulus are well consistent with the available experiment and theoretical data. The pressure dependences of elastic constants C_ij, bulk modulus B₀, shear modulus G, Young's modulus E and Poisson's ratio σ are also presented. With these elastic parameters, we investigate the mechanical stability and compressibility of SrB₆. For the thermodynamic properties, both phonon and quasi-harmonic Debye model methods are adopted. Through the comparison with experimental and other theoretical results, we found the method of quasi-harmonic Debye model is a little better. Moreover, the phonon dispersion relations are also obtained. It is found that there are two LO/TO splitting around 5 THz and 26 THz, respectively.     

Elastic and electronic properties of YNi2B2C under pressure from first principles

The elastic and electronic structure properties of YNi₂B₂C under pressure are investigated by performing the generalized gradient approximation (GGA) and local density approximation (LDA) correction scheme in the frame of density functional theory (DFT). The pressure dependences of the normalized lattice parameters a/a₀ and c/c₀, the ratio c/a, and the normalized primitive volume V/V₀ of YNi₂B₂C are also obtained. The lattice constants and bulk modulus obtained are in agreement with the available experimental and other theoretical data. We have also studied the pressure dependences of elastic properties. It is found that, as pressure increases, the elastic constants C₁₁, C₃₃, C₆₆, C₁₂, and C₁₃ increase, the variation of elastic constant C₄₄ is not obvious. Moreover, our compressional and shear wave velocities V_L=6.99 km/s and V_S=3.67 km/s as well as the Debye temperature Θ=549.7 K at 0 GPa compare favorably with the available experimental data. The pressure dependences of band structures, energy gap and density of states are also investigated.     

Structural and elastic properties of LaTiO3 under pressure

We investigate the structural and elastic properties of LaTiO₃ by the plane-wave pseudopotential density functional theory method. The lattice constants, bulk modulus and its pressure derivative are obtained. These properties in the equilibrium phase are well consistent with the available experimental data. The pressure dependence of the elastic constants, ductility, mechanical stabilities, sound velocity and Debye temperatures are investigated for the first time. From the ratio G/B, we conclude that LaTiO₃ is ductile at 0 GPa and becomes more ductile at high pressure. In addition, the anisotropy factors for every symmetry plane and axis as well as linear bulk modulus at diverse pressures have been obtained.     

The mechanical,thermodynamic and electronic properties of Al3Nb with DO22 structure: A first-principles study

The lattice constants, elastic properties, electronic structure and thermodynamic properties of Al₃Nb with DO₂₂ structure have been investigated by the first-principles calculation. The calculated lattice constants were consistent with the experimental values, and the structural stability was also studied from the energetic point of view. The single-crystal elastic constants (C_ij) as well as polycrystalline elastic parameters (bulk modulus B, shear modulus G, Young's modulus E, Poisson's ratio υ and anisotropy value A) were calculated, and brittleness of Al₃Nb was discussed in detail. Besides, the electronic structure of tetragonal Al₃Nb was studied, which indicates a mixture of metallic bond and covalent bond in Al₃Nb and reveals the underlying mechanism of the stability and elastic properties of Al₃Nb. Finally, the thermodynamic properties of Al₃Nb were calculated and the physical properties such as heat capacity and Debye temperature were predicted within the quasi-harmonic approximation.     

Investigations of phase transition, elastic and thermodynamic properties of GaP by using the density functional theory

The phase transition of gallium phosphide (GaP) from zinc-blende (ZB) to a rocksalt (RS) structure is investigated by the plane-wave pseudopotential density functional theory (DFT). Lattice constant a₀, elastic constants c_ij, bulk modulus B₀ and the pressure derivative of bulk modulus B₀' are calculated. The results are in good agreement with numerous experimental and theoretical data. From the usual condition of equal enthalpies, the phase transition from the ZB to the RS structure occurs at 21.9 GPa, which is close to the experimental value of 22.0 GPa. The elastic properties of GaP with the ZB structure in a pressure range from 0 GPa to 21.9 GPa and those of the RS structure in a pressure range of pressures from 21.9 GPa to 40 GPa are obtained. According to the quasi-harmonic Debye model, in which the phononic effects are considered, the normalized volume V/V₀, the Debye temperature θ, the heat capacity C_v and the thermal expansion coefficient α are also discussed in a pressure range from 0 GPa to 40 GPa and a temperature range from 0 K to 1500 K.     

First-principles calculation of the lattice compressibility, elastic anisotropy and thermodynamic stability of V2GeC

We investigate the elastic and the thermodynamic properties of nanolaminate V₂GeC by using the ab initio pseudopotential total energy method. The axial compressibility shows that the c axis is always stiffer than the a axis. The elastic constant calculations demonstrate that the structural stability is within 0-800 GPa. The calculations of Young's and shear moduli reveal the softening behaviour at about 300 GPa. The Possion ratio makes a higher ionic or a weaker covalent contribution to intra-atomic bonding and the degree of ionicity increases with pressure. The relationship between brittleness and ductility shows that V₂GeC is brittle in ambient conditions and the brittleness decreases and ductility increases with pressure. Moveover, we find that V₂GeC is largely isotropic in compression and in shear, and the degree of isotropy decreases with pressure. The Gr黱eisen parameter, the Debye temperature and the thermal expansion coefficient are also successfully obtained for the first time.     

First-principles calculations on the elastic and thermodynamic properties of NbN

<正>The elastic and thermodynamic properties of NbN at high pressures and high temperatures are investigated by the plane-wave pseudopotential density functional theory（DFT）.The generalized gradient approximation（GGA） with the Perdew-Burke-Ernzerhof（PBE） method is used to describe the exchange-correlation energy in the present work.The calculated equilibrium lattice constant a₀,bulk modulus B₀,and the pressure derivative of bulk modulus B₀’ of NbN with rocksalt structure are in good agreement with numerous experimental and theoretical data.The elastic properties over a range of pressures from 0 to 80.4 GPa are obtained.Isotropic wave velocities and anisotropic elasticity of NbN are studied in detail.It is indicated that NbN is highly anisotropic in both longitudinal and shear-wave velocities. According to the quasi-harmonic Debye model,in which the phononic effect is considered,the relations of（V-V₀）/V₀ to the temperature and the pressure,and the relations of the heat capacity C_V and the thermal expansion coefficientαto temperature are discussed in a pressure range from 0 to 80.4 GPa and a temperature range from 0 to 2500 K.At low temperature,C_V is proportional to T³ and tends to the Dulong-Petit limit at higher temperature.We predict that the thermal expansion coefficientαof NbN is about 4.20×10^-6/K at 300 K and 0 GPa.     

Pressure effect on structural,electronic and thermodynamic investigations of europium filled skutterudite EuFe4Sb12: LDA and LSDA approximations

Numerical calculations based on the full potential muffin-tin orbitals method (FP-LMTO) within the local density approximation (LDA) and the local spin-density approximation (LSDA) to investigate the structural, electronic and thermodynamic properties of filled skutterudite EuFe₄Sb₁₂ are presented. The electronic band structure and density of states profiles prove that this material is a conductor. The present investigation is also extended to the elastic constants, such as the bulk modulus B, anisotropy factor A, shear modulus G, young's modulus E, Poisson's ratio ν, and the B/G ratio with pressure in the range of 0–40 GPa. The sound velocities and Debye temperatures are also predicted from the above constants. The variations of the primitive cell volume, expansion coefficient α, bulk modulus B, heat capacity (C_p and C_v), Debye temperature θ_D, Helmholtz free energy A, Gibbs free energy G, entropy S, and internal energy U with pressure and temperature in the range 0–3000 K are calculated successfully.     

Topological insulator nanostructures: Materials synthesis, Raman spectroscopy, and transport properties

Nanostructured topological insulator materials such as ultrathin films, nanoplates, nanowires, and nanoribbons are attracting much attention for fundamental research as well as potential applications in low-energy dissipation electronics, spintronics, thermoelectrics, magnetoelectrics, and quantum computing due to their extremely large surface-to-volume ratios and exotic metallic edge/surface states. Layered Bi₂Se₃ and Bi₂Te₃ serve as reference topological insulator materials with a large nontrivial bulk gap up to 0.3 eV (equivalent to 3600 K) and simple single-Dirac-cone surface states. In this mini-review, we present an overview of recent advances in nanostructured topological insulator Bi₂Se₃ and Bi₃Te₃ from the viewpoints of controlled synthesis and physical properties. We summarize our recent achievements in the vapor-phase synthesis and structural characterization of nanostructured topological insulator Bi₂Se₃ and Bi₂Te₃, such as nanoribbons and ultrathin nanoplates.We also demonstrate the evolution of Raman spectra with the number of few-layer topological insulators, as well as the transport measurements that have succeeded in accessing the surface conductance and surface state manipulations in the device of topological insulator nanostructures.     

First-principles investigations on structural,elastic, electronic properties and Debye temperature of orthorhombic Ni3Ta under pressure

The structural, elastic, electronic properties and Debye temperature of Ni₃Ta under different pressures are investigated using the first-principles method based on density functional theory. Our calculated equilibrium lattice parameters at 0 GPa well agree with the experimental and previous theoretical results. The calculated negative formation enthalpies and elastic constants both indicate that Ni₃Ta is stable under different pressures. The bulk modulus B, shear modulus G, Young’s modulus E and Poisson’s ratio ν are calculated by the Voigt–Reuss–Hill method. The bigger ratio of B/G indicates Ni₃Ta is ductile and the pressure can improve the ductility of Ni₃Ta. In addition, the results of density of states and the charge density difference show that the stability of Ni₃Ta is improved by the increasing pressure. The Debye temperature Θ _D calculated from elastic modulus increases along with the pressure.