Facile solid-phase ruthenium assisted azide-alkyne cycloaddition (RuAAC) utilizing the Cp1RuCl(COD)-catalyst

The ruthenium assisted azide-alkyne cycloaddition (RuAAC) reaction is a well-established method for the generation of 1,5- and 1,4,5-substituted 1,2,3-triazoles, which we have extended to the solid-phase synthesis of 1,2,3-triazole-peptides. The 1,2,3-triazole moieties were formed upon the reaction of alkynes with a solid-phase bound secondary azide in the presence of the Cp¹RuCl(COD) catalyst at room temperature. Both terminal and internal alkynes underwent highly regioselective cycloaddition reactions under mild conditions, facilitating release of the peptide construct from the resin with intact side-chain protection. Almost quantitative conversion to the corresponding 1,2,3-triazoles was observed within 1 h.     

A fluorocarbon nucleoamphiphile for the construction of actinide loaded microspheres

The synthesis of a novel fluorocarbon based nucleoamphiphile; 2′,3′-O-di-2H,2H,3H,3H-perfluoro-undecanoyl-uridine-5′-phosphocholine (DiF₁₇UPC) is described. DiF₁₇UPC self-assembles into lamellar organizations unlike 1,2-distearoyluridinophosphocholine (DSUPC) which forms DNA-like helical fibre under similar conditions. The fluorocarbon chains have a significant impact on the supramolecular assemblies formed by the nucleoamphiphiles. The SEM and TEM images collected clearly indicate the formation of microspheres when DiF₁₇UPC is hydrated in the presence of thorium nitrate at high temperature (T > 90 °C). The DiF₁₇UPC/Th⁴⁺ microspheres vary in size from 0.5 to 12 μm.     

Simultaneous measurement of trace monoadenosine and diadenosine monophosphate in biomimicking prebiotic synthesis using high-performance liquid chromatography with ultraviolet detection and electrospray ionization mass spectrometry characterization

The method for simultaneous separation and determination of trace monoadenosine and diadenosine monophosphate (i.e. 2′-AMP, 3′-AMP, 5′-AMP and 3′-5′ ApA) in biomimicking prebiotic synthesis was developed using high-performance liquid chromatography (HPLC) with ultraviolet (UV) detection and electrospray ionization mass spectrometry (ESI-MS) identification. The separation was performed on a Supelco C₁₈ column with a gradient elution (solvent A: 10 mM NH₄Ac aqueous solution; solvent B: MeOH). The flow rate was set at 1.0 ml/min. The quantitative determination was achieved by HPLC with UV detection at 260 nm. The linearity ranged from 0.5 to 100 μg/ml for each nucleotide. The limits of detection (LODs) for the four nucleotides were less than 0.30 μg/ml. The recovery ranged from 95.2 to 100.7%. The intra-day relative standard deviations (RSDs) of the retention times were between 0.7 and 1.1%. Both full-scan ESI-MS and -MS² for the four nucleotides under both positive and negative polarity were carried out and the possible cleavage pathways of them were depicted. The specific ions, [AMP + H]⁺ at m/z 348 and [ApA + H]⁺ at m/z 597, were chosen to characterize the four nucleotides in biomimicking prebiotic synthesis between N-(O,O-diisopropyl) phosphoryl amino acid (Dipp-aa) and adenosine. Using the proposed HPLC/UV/ESI-MS method, the concentration of 2′-AMP, 3′-AMP, 5′-AMP and 3′-5′ ApA in the biomimicking prebiotic synthesis samples were determined.     

One-pot synthesis of triazole-fused isoindoles from o-alkynylbenzaldehydes and trimethylsilyl azide

An efficient one-pot synthesis of 1,2,3-triazole-fused isoindoles from o-alkynylbenzaldehydes and trimethylsilyl azide (TMSN₃) is reported. The reaction proceeds through the formation of a diazide intermediate and a subsequent intramolecular azide-alkyne cycloaddition, providing a novel access to a variety of 8-azido-8H-[1,2,3]triazolo[5,1-a]isoindoles in high yields.     

Synthesis,antioxidant activity,and α-glucosidase enzyme inhibition of α-aminophosphonate derivatives bearing piperazine-1,2,3-triazole moiety

A novel series of piperazine-1,2,3-triazole bearing dimethyl(((2-(4-((1H-1,2,3-triazole-4-yl)methyl)piperazin-1-yl)ethylamino)(2-hydroxyaryl)methyl)phosphonate derivatives have been prepared via copper-catalyzed azide-alkyne 1,3-dipolar cycloaddition (CuAAC) (Click Reaction) and Schiff base reactions. The synthesized compounds were confirmed by spectral characterization (¹H, ¹³C and ³¹P NMR, and mass). The title compounds were evaluated for in vitro alpha glucosidase enzyme inhibition and in vitro antioxidant activity using DPPH and H₂O₂ methods.     

Alkyne–azide cycloaddition catalyzed by a dinuclear copper(I) complex

A novel dinuclear copper complex Cu^I₂(pip)₂ was used as a catalyst for alkyne–azide cycloaddition (CuAAC) reaction. High yields (95–99%) were obtained for various substrates at a low loading of 0.2 mol %. The unique structure, high stability of the dinuclear structure in solution, and easy preparation make this complex not only a high-efficiency catalyst but also a model for understanding the mechanism of the CuAAC reaction.     

Quick and highly efficient copper-catalyzed cycloaddition of organic azides with terminal alkynes

Good to excellent yields of 1,4-disubstituted 1,2,3-triazoles were obtained within 2-25 min when the Cu(I)-catalyzed azide-alkyne cycloaddition (CuAAC) reaction was carried out under solvent-free conditions, with [Cu(phen)(PPh(3))(2)]NO(3) (1mol%) as the catalyst.     

Synthesis of novel multidentate carbohydrate-triazole ligands

Cu(I)-catalyzed 1,3-dipolar cycloaddition (click reaction) of 1 mol equiv of N,N′-di-prop-2-ynyl-phthalamide (1a), N,N′-di-prop-2-ynyl-isophthalamide (1b), and pyridine-2,6-dicarboxylic acid bis-prop-2-ynylamide (1c), respectively with 2 mol equiv of 2,3,4,6-tetra-O-acetyl-β-d-glucopyranosyl azide (2a), 2-azidoethyl 2,3,4,6-tetra-O-acetyl-β-d-glucopyranoside (2b), and 2-azidoethyl 2,3,4,6-tetra-O-acetyl-α-d-mannopyranoside (2c), respectively, afforded the corresponding bis-cycloadducts 3-5, containing two 1,2,3-triazole moieties each, in 38-76% yield. Reaction of 1 mol equiv of 2c with 1 mol equiv of 1c under otherwise identical conditions gave the mono-cycloadduct 6, containing one 1,2,3-triazole and one 2-propynylamide moiety, in 77% yield. Reaction of 6 with 2a afforded 7, containing two different sugar moieties, in 67% yield.     

Formation of 5-phenyl-1,2-dithiole-3-thione from molybdenum dithiopropiolato complexes

Molybdenum dithiopropiolato complexes, [(η⁵-C₅R₄R^′)Mo(CO)₂(η²-S₂CCCPh)] (R=H, R^′=Me 1a, R=R^′=H 1b; R=R^′=Me 1c) react with trimethylamine-N-oxide (TMNO · 2H₂O) under mild thermolysis to form 5-phenyl-1,2-dithiole-3-thione (2). The reaction proceeds through the formation of the oxo-complexes, [(η⁵-C₅R₄R^′)Mo(O)(η³-S₂CCCPh)] (R=H, R^′=Me 3a, R=R^′=H 3b; R=R^′=Me 3c). Direct reaction of 3a-c with TMNO · 2H₂O under thermolysis also results in formation of 2.     

Complexes derived from the general copper(II)/maleamic acid/N,N′,N′′-chelate reaction systems: Synthetic,reactivity, structural and spectroscopic studies

The synthetic investigation of the Cu^II/maleamate(−1) ion (HL⁻)/N,N′,N′′-chelate general reaction system has allowed access to compounds [Cu₂(HL)₂(bppy)₂](ClO₄)₂·H₂O (1·H₂O), [Cu(HL)(bppy)(ClO₄)] (2) and [Cu(HL)(terpy)(H₂O)](ClO₄) (4) (bppy = 2,6-bis(pyrazol-1-yl)pyridine, terpy = 2,2′;6′,2′′-terpyridine). In the absence of externally added hydroxides, compound [Cu₂(L′)₂(bppy)₂](ClO₄)₂ (3) was obtained from MeOH solutions; L′⁻ is the monomethyl maleate(−1) ligand which is formed in situ via the Cu^II-assisted HL⁻ → L′⁻ transformation. In the case of tptz-containing (tptz = 2,4,6-tris(2-pyridyl)-1,3,5-triazine) reaction systems, the Cu^II-assisted hydrolysis of tptz to pyridine-2-carboxamide (L1) afforded complex [Cu(L1)₂(NO₃)₂] (5). The crystal structures of 1–5 are stabilized by intermolecular hydrogen bonding and π–π stacking interactions. Characteristic IR bands of the complexes are discussed in terms of the known structures and the coordination modes of the ligands.     

Syntheses and characterization of η-cyclopentadienyl and η-indenyl ruthenium(II) complexes of arylazoimidazoles: The molecular structure of the complex [(η-C5H5)Ru(PPh3)(C6H5-NN-C3H3N2)]

The complex [(η⁵-C₅H₅)Ru(PPh₃)₂Cl] (1) reacts with several arylazoimidazole (RaaiR′) ligands, viz., 2-(phenylazo)imidazole (Phai-H), 1-methyl-2-(phenylazo)imidazole (Phai-Me), 1-ethyl-2-(phenylazo)imidazole (Phai-Et), 2-(tolylazo)imidazole (Tai-H), 1-methyl-2-(tolylazo)imidazole (Tai-Me) and 1-ethyl-2-(tolylazo)imidazole (Tai-Et), gave complexes of the type [(η⁵-C₅H₅)Ru(PPh₃)(RaaiR′)]⁺ {where R, R′ = H (2), R = H, R′ = CH₃ (3), R = H, R′ = C₂H₅ (4), R = CH₃, R′ = H (5), R, R′ = CH₃ (6), R = CH₃, R′ = C₂H₅ (7)}. The complex [(η⁵-C₉H₇)Ru(PPh₃)₂(CH₃CN)]⁺ (8) undergoes reactions with a series of N,N-donor azo ligands in methanol yielding complexes of the type [(η⁵-C₉H₇) Ru(PPh₃)(RaaiR′)]⁺ {where R, R′ = H (9), R = H, R′ = CH₃ (10), R = CH₃, R′ = H (11), R = CH₃, R′ = C₂H₅ (12)}, respectively. These complexes were characterized by FT IR and FT NMR spectroscopy as well as by analytical data. The molecular structure of the complex [(η⁵-C₅H₅)Ru(PPh₃)(C₆H₅-NN-C₃H₃N₂)]⁺ (2) was established by single crystal X-ray diffraction study.     

Growing Impact of Intramolecular Click Chemistry in Organic Synthesis

Click Chemistry, a modular, rapid, and one of the most reliable tool for the regioselective 1,2,3-triazole forming [3+2] reaction of organic azide and terimal alkyne is widely explored in various emerging domains of research ranging from chemical biology to catalysis and medicinal chemistry to material science. This regioselective reaction from a diverse range of azido-alkyne scaffolds has been well performed in both intermolecular as well as intramolecular fashions. In comparison to the intermolecular metal (Cu/Ru/Ni) variant of ‘Click Chemistry’, the intramolecular click tool is little addressed. The intramolecular click chemistry is exemplified as a mordern tool of cyclization which involves metal-catalyzed (CuAAC/RuAAC) cyclization, organo-catalyzed cyclization, and thermal-induced topochemical reaction. Thus, we report herein the recent approaches on intramolecular azide-alkyne cycloaddition ‘Click Chemistry‘ with their wide-spread emerging applications in the developement of a diverse range of molecules including fused-heterocycles, well-defined peptidomemics, and macrocyclic architectures of various notable features.     

Step by step palladium mediated syntheses of new 2-(pyridin-2-yl)-6-R-nicotinic acids and esters

Taking advantage of palladium peculiar “rollover” C,N cyclometallation, it is possible to promote C(3) functionalization of 6-alkyl-substituted-2,2′-bipyridines. The carbonylation reaction of rollover species [Pd(Lⁿ)Cl]₂, (HL¹ = 6-isopropyl-2,2′-bipy, 1; HL² = 6-neopentyl-2,2′-bipy, 2; HL³ = 6-ethyl-2,2′-bipy, 3; HL⁴ = 6-methyl-2,2′-bipy, 4) allowed the synthesis of 2-(pyridin-2-yl)-6-alkyl-nicotinic acids or esters. These nicotinic derivatives are extremely rare and, as far as we know, quite unreported in the case of the 6-substituted molecules.     

Fluorometric determination of fluoride ion by reagent tablets containing 3-hydroxy-2'-sulfoflavone and zirconium(IV) ethylenediamine tetraacetate

A reagent tablet for determination of fluoride ion has been prepared using ethylenediamine-N,N,N′,N′-tetraacetate complex of zirconium (Zr-EDTA), 3-hydroxy-2′-flavone (FS) and an appropriate pH buffer. Dissolving of the tablet into water exhibits an intense blue fluorescence (λ_max = 460 nm) upon excitation at 377 nm and the fluorescence intensity decreases with the presence of fluoride ion. Hence, a simple fluorescent detection procedure for fluoride ion in aqueous media was successfully constructed with this tablet. The principle of this detection system is the ligand exchange reaction of FS bound to Zr-EDTA with fluoride ion. The present system provides an easy, rapid and selective determination method of fluoride ion ranging from 5 × 10⁻⁶ to 1 × 10⁻³ mol dm⁻³. The measurement of real samples with this tablet showed the similar results as those by the common method with the Alfusone reagent.     

Synthesis, characterization, reactivity and computational studies of new rhenium(I) complexes with thiosemicarbazone ligands derived from 4-(methylthio)benzaldehyde

N-thioamide thiosemicarbazone derived from 4-(methylthio)benzaldehyde (R = H, HL¹; R = Me, HL² and R = Ph, HL³) have been prepared and their reaction with fac-[ReX(CO)₃(CH₃CN)₂] (X = Br, Cl) in methanol gave the adducts [ReX(CO)₃(HLⁿ)] (1a X = Cl, n = 1; 1a′ X = Br, n = 1; 1b X = Cl, n = 2; 1b′ X = Br, n = 2; 1c X = Cl, n = 3; 1c′ X = Br, n = 3) in good yield.All the compounds have been characterized by elemental analysis, mass spectrometry (ESI), IR and ¹H NMR spectroscopic methods. Moreover, the structures of HL², HL³, HL³·(CH₃)₂SO and 1b′·H₂O were also elucidated by X-ray diffraction. In 1b′, the rhenium atom is coordinated by the sulphur and the azomethine nitrogen atoms (κS,N³) forming a five-membered chelate ring, as well as three carbonyl and bromide ligands. The resulting coordination polyhedron can be described as a distorted octahedron.The structure of the dimers is based on rhenium(I) thiosemicarbazonates [Re₂(L¹)₂(CO)₆] (2a), [Re₂(L²)₂(CO)₆] (2b) and [Re₂(L³)₂(CO)₆] (2c) as determined by X-ray studies. Methods of synthesis were optimized to obtain amounts of these thiosemicarbazonate complexes. In these compounds the dimer structures are achieved by Re-S-Re bridges, where S is the thiolate sulphur from a κS,N³-bidentate thiosemicarbazonate ligand.Some single crystals isolated in the synthesis of 2b contain [Re(L⁴)(L²)(CO)₃] (3b) where L⁴ (=2-methylamine-5-(para-methylsulfanephenyl)-1,3,4-thiadiazole) is originated in a cyclization process of the thiosemicarbazone. Furthermore, the rhenium atom is coordinate by the sulphur and the thioamidic nitrogen of the thiosemicarbazonate (κS,N²) affording a four-membered chelate ring.     

Reaction chemistry of tricarbonyl-η-pentadienylmanganese: Straightforward synthesis of stable manganese carbonyl terminal thiolates and a dinuclear bis(ethylenediaminyl) complex

Tricarbonyl-η⁵-pentadienylmanganese reacts with mercaptans RSH, R = Ph, C₆F₅, m-NH₂C₆H₄, p-NH₂C₆H₄, and HSCH₂CH₂ in the presence of ECH₂CH₂E, E = -PPh₂ or -NH₂ to give novel stable terminal thiolate mononuclear complexes fac-Mn(CO)₃(SR)(Ph₂PCH₂CH₂PPh₂-κ²-P,P′) for R = Ph, C₆F₅, m-NH₂C₆H₄, p-NH₂C₆H₄, and HSCH₂CH₂ and fac-Mn(CO)₃(SR)(H₂NCH₂CH₂NH₂-κ²-N,N′) for R = Ph and C₆F₅. Upon reaction of tricarbonyl-η⁵-pentadienylmanganese with ethylenediamine a dinuclear complex [fac-Mn(CO)₃(μ-H₂NCH₂CH₂NH-κ²-N,N′)]₂ was formed wherein the diaminyl ligand functions in the capacity of chelating and bridging ligand.     

Steric and electronic effects in stabilizing allyl-palladium complexes of “P-N-P” ligands, X2PN(Me)PX2 (X = OC6H5 or OC6H3Me2-2,6)

The chemistry of η³-allyl palladium complexes of the diphosphazane ligands, X₂PN(Me)PX₂ [X = OC₆H₅ (1) or OC₆H₃Me₂-2,6 (2)] has been investigated.The reactions of the phenoxy derivative, (PhO)₂PN(Me)P(OPh)₂ with [Pd(η³-1,3-R′,R″-C₃H₃)(μ-Cl)]₂ (R′ = R″ = H or Me; R′ = H, R″ = Me) give exclusively the palladium dimer, [Pd₂{μ-(PhO)₂PN(Me)P(OPh)₂}₂Cl₂] (3); however, the analogous reaction with [Pd(η³-1,3-R′,R″-C₃H₃)(μ-Cl)]₂ (R′ = R″ = Ph) gives the palladium dimer and the allyl palladium complex [Pd(η³-1,3-R′,R″-C₃H₃)(1)](PF₆) (R′ = R″ = Ph) (4). On the other hand, the 2,6-dimethylphenoxy substituted derivative 2 reacts with (allyl) palladium chloro dimers to give stable allyl palladium complexes, [Pd(η³-1,3-R′,R″-C₃H₃)(2)](PF₆) [R′ = R″ = H (5), Me (7) or Ph (8); R′ = H, R″ = Me (6)].Detailed NMR studies reveal that the complexes 6 and 7 exist as a mixture of isomers in solution; the relatively less favourable isomer, anti-[Pd(η³-1-Me-C₃H₄)(2)](PF₆) (6b) and syn/anti-[Pd(η³-1,3-Me₂-C₃H₃)(2)](PF₆) (7b) are present to the extent of 25% and 40%, respectively. This result can be explained on the basis of the steric congestion around the donor phosphorus atoms in 2. The structures of four complexes (4, 5, 7a and 8) have been determined by X-ray crystallography; only one isomer is observed in the solid state in each case.     

Photocytotoxic and anaerobic DNA cleavage activity of binuclear 3,3′-dithiodipropionic acid cobalt(II) complexes having phenanthroline bases

Dicobalt(II) complexes [{(B)Co^II}₂(μ-dtdp)₂] (1–3) of 3,3′-dithiodipropionic acid (dtdp) and phenanthroline bases (B), viz. 1,10-phenanthroline (phen in 1), dipyrido[3,2-d:2′,3′-f]quinoxaline (dpq in 2) and dipyrido[3,2-a:2′,3′-c]phenazine (dppz in 3), have been prepared, characterized and their photo-induced anaerobic DNA cleavage activity studied. The elemental analysis and mass spectral data suggest binuclear formulation of the complexes. The redox inactive complexes have magnetically non-interacting dicobalt(II) core showing magnetic moment of ∼3.9 μ_B per cobalt(II) center. The complexes show good binding propensity to calf thymus DNA giving K_b values within 4.3 × 10⁵–4.0 × 10⁶ M⁻¹. Thermal melting and viscosity data predict DNA groove binding and/or partial intercalative nature of the complexes. The complexes show significant anaerobic DNA cleavage activity in green light under argon atmosphere possibly involving radical species generated from the disulfide moiety in a type-I pathway. The DNA cleavage reaction under aerobic medium in green light is found to involve hydroxyl radical species. The dppz complex 3 exhibits significant photocytotoxicity in HeLa cervical cancer cells with an IC₅₀ value of 2.3 μM in UV-A light of 365 nm, while it is essentially non-toxic in dark giving an IC₅₀ value of >200 μM. A significant reduction of the dark toxicity of the organic dppz base (IC₅₀ = 8.3 μM in dark) is observed on binding to the cobalt(II) center while essentially retaining its photocytotoxicity in UV-A light (IC₅₀ = 0.4 μM).     

Carbosilane dendrimers containing peripheral cyclopentadienyl niobium- and tantalum-imido complexes

Anilines Gn-{(C₆H₄)N(SiMe₃)₂}_m, based on simple or dendritic carbosilanes, have been used to synthesized (imido)tantalum compounds Gn-{(C₆H₄)NTaCl₂Cp^∗}_m (1, n = 0, m = 1; 2, n = 1, m = 4; Cp^∗ = η⁵-C₅Me₅), by the reaction with [TaCl₄Cp^∗] and elimination of SiMe₃Cl. (Imido)niobocene compounds of general formula (3-5; n = 0, 1, 2; m = 1, 4, 8, respectively) have been readily prepared from their corresponding half-sandwich complexes Gn-{(C₆H₄)NNbCl₂Cp′}_m by the reaction with m equiv. of LiCp′ (Cp′ = η⁵-C₅H₄SiMe₃). Compounds 1-5 are all found to be exceedingly moisture sensitive, and in the case of the (imido)niobocene materials the hydrolytic reaction selectively leads to the formation of (6). The molecular structure of 6 has been determined by X-ray diffraction studies.     

Mononuclear ruthenium complexes containing chiral aminooxazolines: Syntheses, X-ray studies and catalytic activity

The synthesis and characterisation of three novel mononuclear ruthenium(II) complexes containing one of the following chiral auxiliary ligands: 2-amino-(4R)-phenyl-2-oxazoline (amphox), indanyl-2-amino-(4R,5S)-2-oxazoline (aminox) or indanyl-(2′-anilinyl)-(4R,5S)-2-oxazoline (aninox) is described using [Ru₂Cl₄(η⁶-p-cym)₂] (p-cym = 1-isopropyl-4-methylbenzene) as the Ru starting material. The new complexes have been identified as the neutral derivatives [RuCl₂(η⁶-p-cym)(amphox-κ¹N_ox)] (1), [RuCl₂(η⁶-p-cym)(aminox-κ¹N_ox)] (2) and the salt [RuCl(η⁶-p-cym)(aninox-κ²N,N′)]Cl (3). These materials have been fully characterised (elemental analysis, NMR, IR, conductance, MS, etc.) and, in the case of 2 and 3, structurally elucidated in the solid-state using single crystal X-ray diffraction methods. All three complexes show good catalytic activity (max. conversion >99%, TOF = 424 h⁻¹) but only modest enantio-selectivity (max. ee = 40%) for the transfer hydrogenation reaction of acetophenone with isopropyl alcohol. The complexes were also tested in an asymmetric Diels-Alder reaction involving cyclopentadiene and acrolein (max. conversion >99%, TOF = 42 h⁻¹). In this case, the diastereo-selectivity was good to moderate (max. de = 84%), but the ee values were poor (max. ee = 12%).