Solution structure of bis(acetoxy)iodoarenes as observed by O NMR spectroscopy

A group of para-substituted bis(acetoxy)iodoarenes has been studied by ¹⁷O and ¹³C NMR. Only one signal for all the oxygens of the acetoxy groups has been observed. Both ¹⁷O and ¹³C chemical shifts of this group show a strong invariance with para substitution. The absence of covalent I-O bonds and an ion pair structure is proposed for the title compounds.     

Formation of perfluorinated polyphenylenes by multiple pentafluorophenylation using C6F5Si(CH3)3

Pentafluorophenylation of perfluoroarenes with C₆F₅Si(CH₃)₃ was investigated by using NMR and MALDI-TOF-MS techniques. Successive multiple pentafluorophenylation easily occurred not only on the para-position but also on the ortho-positions to provide perfluorinated p-phenylene and m-phenylene compounds. The perfluoroarenes having electron-withdrawing substituents provided oligo- to poly-(phenylene)s depending on the added amounts of C₆F₅Si(CH₃)₃, while the perfluoroarenes having electron-donor substituents gave H(C₆F₄)_nF polymers produced from C₆F₅H, which was the decomposed product of C₆F₅Si(CH₃)₃.     

Appending aromatic moieties at the para- and meta-position of calixarene phenol rings via p-bromodienone route

The silver-mediated nucleophilic substitution on calixarene p-bromodienone derivatives (the ‘p-bromodienone route’) with activated aromatic substrates allows the introduction of aromatic moieties at the para- or meta-position of calixarene aromatic rings. Less reactive substrates mainly afford C-O para-coupled derivatives, while more activated ones mainly give inherently chiral, C-C meta-coupled products through a dienone-phenol rearrangement of the intermediate dienone derivative. Examples of C-C para-coupling and O-C coupling at the endo calixarene oxygen atom were also observed.     

4-Cyanomethyl-ortho-quinone tautomerism and the structure of the dienophile in Gates' morphine synthesis

Oxidation of (3,4-dihydroxyphenyl)acetonitrile gives (3-hydroxy-4-oxo-cyclohexa-2,5-dienylidene)acetonitrile via the isomeric ortho-quinone ((3,4-dioxo-cyclohexa-2,5-dienylidene)acetonitrile). This para-quinomethane product is formed as a mixture of diastereoisomers and with an initial composition of Z/E 4:1. Over 24 h this mixture equilibrates to a composition of Z/E 5:4. The para-quinomethane reacts with morpholine to give (3,4-dihydroxyphenyl)-morpholin-4-yl-acetonitrile. Similar oxidation of (3,4-dihydroxynaphthalen-1-yl)acetonitrile also gives a para-quinomethane derivative and not the 1,2-naphthoquinone as previously described. The reactivity of this para-quinomethane derivative as a 1,3-dienophile in a key step of the Gates' morphine synthesis is attributed to formation of its conjugate acid.     

Solvent effect on thermal degradation of plasticized para-substituted polystyrenes

The thermal effect on stability of a series of para-substituted polystyrenes with methyl, methoxy and α-methyl substituents in various solvents was studied in the temperature range of 298-363 K. They gave a monomer fluorescence as a minor part and excimer fluorescence as a major part. Thermal heating of para-substituted polystyrenes shows a decrease in both monomer and excimer fluorescences in all used solvents. Thermal heating causes a small fluorescence quenching effect at lower temperatures in solution but becomes very dominant at higher temperatures. Added terephthalate and phthalate plasticizers to these para-substituted polystyrenes caused a quenching of both monomer and excimer fluorescences without the formation of exciplex emission. The thermal quenching processes of the plasticized polymers were accompanied by a change in the structure of the fluorescence spectra at high heating temperatures. This may indicate that thermodestruction of these polymers starts from a random chain scission. The change in solvent polarity has considerable effect on fluorescence quenching but it has a minor effect on the thermal degradation of these polymers. The binding energies for excimer formation were calculated in the used solvents.     

Synthesis and H NMR spectroscopic properties of substituted (η-tetraarylcyclobutadiene)(η-cyclopentadienyl)cobalt metallocenes

The reaction of diarylacetylenes with CoCl(PPh₃)₃ and sodium cyclopentadienylide or sodium carbomethoxycyclopentadienylide gave (η⁴-tetra-arylcyclobutadiene)(η⁵-cyclopentadienyl)cobalt and (η⁴-tetra-arylcyclobutadiene)(η⁵-carbomethoxycyclopentadienyl)cobalt, respectively, where aryl = para-XC₆H₄ (X = CF₃, F, MeO). The reaction was unsuccessful for the synthesis of (η⁴-tetra(para-methoxyphenyl)cyclobutadiene)(η⁵-cyclopentadienyl)cobalt, which was synthesised instead from dicarbonyl(η⁵-cyclopentadienyl)cobalt. In all of the examples starting with CoCl(PPh₃)₃ an intermediate (η⁵-cyclopentadienyl)- or (η⁵-carbomethoxycyclopentadienyl)(triphenylphosphine)-2,3,4,5-tetraarylcobaltacyclopentadiene complex was isolated, and two examples were characterised by X-ray crystallography. Heating the (η⁵-cyclopentadienyl)- or (η⁵-carbomethoxycyclopentadienyl)(triphenylphosphine)-2,3,4,5-tetraarylcobaltacyclopentadiene complexes resulted in clean conversion to the corresponding metallocenes. The influence of the para-aryl substituents on the ¹H NMR of the cyclopentadienyl moiety is tabulated, together with the influence of a range of R substituents in (η⁴-tetraphenylcyclobutadiene)(η⁵-RC₅H₄)cobalt (R = CO₂Me, CH₂OH, Me, CHO, CCH, CO₂H, CN, CONHR¹, 2-oxazolinyl, NH₂, NHAc, HgCl, Br, I, SiMe₃, SnMe₃, Ph).     

Synthesis of N,N′-bis and N,N,N′,N′-tetra-[(3,5-di-substituted-1-pyrazolyl)methyl]para-phenylenediamines: new candidate ligands for metal complex wires

A series of tridentate ligands N,N-bis-[(di-substituted-1-pyrazolyl)methyl]arylamines 2-3a,b and benzylamine 4a,b, tetradentate N,N′-bis-[(di-substituted-1-pyrazolyl)methyl]para-phenylenediamines 7a,b and hexadentate N,N,N′,N′-tetra-[(di-substituted-1-pyrazolyl)methyl]para-phenylenediamines 8a,b has been prepared in good yield by condensation of arylamines, benzylamine or para-phenylenediamine with N-hydroxymethyl disubstituted pyrazoles 1a,b. The synthesis and characterisation of these various polydentate ligands are described.     

Facile conversion of para-benzoquinones to para-alkoxyphenols with primary/secondary alcohols and amberlyst-15: a process showing novel reducing property of such alcohols

A new efficient methodology has been developed for the synthesis of para-alkoxyphenols, an important group of anti-melanoma compounds, by heating alcoholic solutions of para-benzoquinones in the presence of amberlyst-15. The most notable feature here is the behaviour of the used primary or secondary alcohol as an effective reducing agent.     

Synthesis of functional Δ-1,3,5-oxazaphospholene and 2H-1,4,2-diazaphosphole complexes via catalytic ring expansion reactions of a 2H-azaphosphirene complex

Catalytically-induced ring expansion of 2H-azaphosphirene complex 1 using ferrocenium hexafluorophosphate and acetone (2), diethylketone (3), cyclohexanone (4), benzaldehyde (5) or para-hydroxy-benzaldehyde (6) furnished selectively the Δ³-1,3,5-oxazaphospholene complexes 7-11, whereas with ortho- and para-hydroxy- or ortho- and para-amino-substituted benzonitriles the 2H-1,4,2-diazaphosphole complexes 16-19 were obtained. Two further findings are noteworthy: (1) The significant decreased reaction time in the case of the sterically more demanding carbonyl derivatives 2-4 and (2) the formation of diastereomers in the case of 10 and 11 with a ratio of 8:1 and 9:1, respectively. All products were characterized by NMR, MS and elemental analysis and the configuration of complexes 7 and 10a were determined by X-ray single-crystal diffraction analysis.     

Trimethylsilyl derivatives of N-Boc-cytosine and their effect on I2-mediated nucleosidation of O-MTM ethers

Mono- and bis(trimethylsilyl) derivatives of N⁴-Boc-cytosine were synthesized and characterized by ¹H NMR. Only the mono(trimethylsilyl)-N⁴-Boc-cytosine participates in the iodine-mediated nucleosidation of N-Fmoc-O-methylthiomethyl serine benzyl ester to produce the cytosine nucleoamino acid, while the bis(trimethylsilyl) derivative failed to give any product. A tentative mechanistic explanation is proposed.     

The effect of spiroadamantane substitution on the conformational preferences of N-Me pyrrolidine and N-Me piperidine: a description based on dynamic NMR spectroscopy and ab initio correlated calculations

Dynamic NMR spectroscopy and ab initio correlated calculations revealed that the attachment of a spiroadamantane entity at the C-2 position of N-methylpyrrolidine or N-methylpiperidine induces a severe steric crowding around nitrogen, which changes the conformational space of the heterocycle resulting in: (a) the complete destabilization of the N-Me(eq) conformer in spiranic structures; in contrast the N-Me(eq) conformer corresponds to the global minimum in N-methylpyrrolidine or N-methylpiperidine. The spiroadamantane structure raises the energy of the equatorial conformer because of the severe van der Waals repulsion between the N-Me(eq) group and adamantane C-H bonds. (b) The interconversion between the only populated enantiomeric N-Me(ax) conformers ax→[eq]→ax′; the interconversion eq→ax between N-Me(eq) and N-Me(ax) conformers, which are both populated, is observed in N-methylpyrrolidine or N-methylpiperidine. (c) The raising of ring and nitrogen inversion barriers ax→ts by ∼4-6 kcal mol⁻¹. The dynamic NMR study provides evidence that the most important process required for the enantiomerization between the axial N-Me conformers in spiropiperidine 4 and spiropyrrolidine 5 are different, i.e., a nitrogen inversion in 5 (9.10 kcal mol⁻¹) and a ring inversion in 4 (15.2 kcal mol⁻¹). While an enantiomerization interconverts N-Me axial conformers in spiropiperidine 5 and spiropyrrolidine 4, substitution of the pyrrolidine ring of 5 with a C-Me group effects a diastereomerization between two N-Me axial conformers and reduces effectively the nitrogen inversion barrier according to the protonation experiments and the calculations. In general, all the calculations levels used, i.e., the MM3, B3LYP/6-31+G^∗∗ and MP2/6-311++G^∗∗//B3LYP/6-31+G^∗∗, predict correctly the different stability of the local minima; however only MP2/6-311++G^∗∗//B3LYP/6-31+G^∗∗ was found to be reliable for the calculation of the nitrogen inversion barriers.     

Substituent effects of phosphonate groups electronic repartition of π-conjugated ferrocene analogues of stilbene

The synthesis of para-substituted ferrocene analogues of stilbene was performed by using the Heck reaction, starting from vinylferrocene. The variation of the electronic density of these compounds with the electronic withdrawing strength of the substituents was studied using ¹³C NMR spectroscopy, absorption spectra and cyclic voltammetry. The correlation of Hammett constants with the redox properties of the substituted compounds using Nagy's method allowed us to revisit the determination of the Hammett constants of diethyl phosphonate ester and phosphonic acid substituents. Our measurements were in agreement with the literature except for the diethyl phosphonate group.     

Reactions of fluoronitrobenzenes with MTBD strong base in acetonitrile in the presence of water molecules

Products of the reactions between three fluorinated nitrobenzenes (2,3,4,6-tetrafluoronitrobenzene, mNF4; 2,3,4,5-tetrafluoronitrobenzene, oNF4; pentafluoronitro-benzene, NF5) and 7-methyl-1,5,7-triazabicyclo[4.4.0]dec-5-ene (MTBD) in the presence of the water molecules in acetonitrile were isolated and identified by analytical and spectroscopic methods. The reaction products included ortho- and para-substituted nitro-compounds. The kinetics of these reactions is independent of the substrates studied. The rate-determining step of these reactions is the hydrolysis of one ring of the MTBD molecule after the fast formation of the Meisenheimer complex. The mechanism of these reactions and the structures of the products are discussed.     

Structures and conformations of 1-aryl-1,4-dihydro-3(2H)-isoquinolinones

The X-ray crystal structures of series of 1-aryl-1,4-dihydro-3(2H)-isoquinolinones (1-7) have been determined. Lactame heterocyclic ring possesses more or less deformed boat conformation in all examined structures. The aryl substituent adopts the equatorial position in the structures 1-3 and the axial one in 5-7. In the structure of 4, due to extremely flattened heterocyclic ring, aryl substituent location can be named as bisectional. In all solved structures the molecules are joined into the dimers via two N-H?O hydrogen bonds. At the same time, ¹H NMR studies in DMSO-d₆ solutions were accomplished and profound analysis of ²J, ³J, and ⁵J coupling constants have shown that in isoquinolinone system the heterocyclic ring adopts the boat conformation in all investigated compounds. The stereochemical orientations of the phenyl ring at C1 do not depend on the nature of the substituent but, exclusively, on the mode of substitution. However, three forms of undulated laktam heterocyclic ring conformation in respect of 1-aryl substituent positions were confirmed by calculation (conformational analysis).     

Application of J(C,H) coupling constants in conformational analysis

Conformational equilibria for a number of methyl substituted 1,3-dioxanes 1, 1,3-oxathianes 2 and 1,3-dithianes 3 were calculated at the HF and DFT levels of theory. In addition to the chair conformers also the energetically adjacent twist conformers were considered and the positions of the corresponding conformational equilibria estimated. On the basis of the global energy minima of conformers, participating in the conformational equilibria, the ¹J_C,Hax,equ coupling constants were calculated using the GIAO method and compared with the experimental values obtained from ¹³C,¹H coupled ¹³C NMR spectra. The Perlin effect, the influence of the solvent and the suitability of this NMR parameter for assigning the conformational equilibria present are critically discussed.     

Dipyridyl/pyridinium thieno[2,3-b]thiophenes as new atropisomeric systems. Synthesis, conformational analysis and energy minimization

Synthesis of a new class of cofacially oriented dipyridyl(pyridinium)lthieno[2,3-b]thiophenes with or without -CO₂Et and -COMe substituents at C2, and C5 positions of thieno[2,3-b]thiophene ring was readily accomplished using a double Dieckman cyclization protocol as the key step. While C2/C5 substituted dipyridylthieno[2,3-b]thiophenes exhibited syn/anti atropisomerism at least up to 70 °C with Arrhenius energy of activation (ΔG^≠) in the range of 17-18 kcal/mol, on the other hand unsubstituted dipyridylthieno[2,3-b]thiophene and its bis-N-quaternized salt were found to show free conformational rotation with an estimated ΔG^≠ of lower than 10 kcal/mol. Conformational energy minimization using AM1 protocol revealed a slight preference for the anti over syn isomers. Compared to the unsubstituted dipyridylthieno[2,3-b]thiophenes, higher energy barriers to rotation (3.7-5.1 kcal/mol) in substituted dipyridylthieno[2,3-b]thiophenes can be attributed to steric encumbrance resulting from -CO₂Et and -COMe substituents located on the non-rotating thienothiophene platform.     

Syntheses, crystal structures and Raman spectra of Ba(BF4)(PF6), Ba(BF4)(AsF6) and Ba2(BF4)2(AsF6)(H3F4); the first examples of metal salts containing simultaneously tetrahedral BF4 and octahedral AF6 anions

In the system BaF₂/BF₃/PF₅/anhydrous hydrogen fluoride (aHF) a compound Ba(BF₄)(PF₆) was isolated and characterized by Raman spectroscopy and X-ray diffraction on the single crystal. Ba(BF₄)(PF₆) crystallizes in a hexagonal space group with a=10.2251(4) Å, c=6.1535(4) Å, V=557.17(5) Å³ at 200 K, and Z=3. Both crystallographically independent Ba atoms possess coordination polyhedra in the shape of tri-capped trigonal prisms, which include F atoms from BF₄⁻ and PF₆⁻ anions. In the analogous system with AsF₅ instead of PF₅ the compound Ba(BF₄)(AsF₆) was isolated and characterized. It crystallizes in an orthorhombic Pnma space group with a=10.415(2) Å, b=6.325(3) Å, c=11.8297(17) Å, V=779.3(4) Å³ at 200 K, and Z=4. The coordination around Ba atom is in the shape of slightly distorted tri-capped trigonal prism which includes five F atoms from AsF₆⁻ and four F atoms from BF₄⁻ anions. When the system BaF₂/BF₃/AsF₅/aHF is made basic with an extra addition of BaF₂, the compound Ba₂(BF₄)₂(AsF₆)(H₃F₄) was obtained. It crystallizes in a hexagonal P6₃/mmc space group with a=6.8709(9) Å, c=17.327(8) Å, V=708.4(4) Å³ at 200 K, and Z=2. The barium environment in the shape of tetra-capped distorted trigonal prism involves 10 F atoms from four BF₄⁻, three AsF₆⁻ and three H₃F₄⁻ anions. All F atoms, except the central atom in H₃F₄ moiety, act as μ₂-bridges yielding a complex 3-D structural network.     

On the detection of both carbonyl and hydroxyl oxygens in amino acid derivatives: a O NMR reinvestigation

The hypothesis and the conclusions of previous ¹⁷O NMR studies on the detection of both oxygens of the carboxylic group of Boc-[¹⁷O]Tyr(2,6-diClBzl)-OH in DMSO-d₆ solution (Tetrahedron Lett.2000, 41, 8651) are reconsidered. The appearance of two discrete resonances at 340 and 175 ppm of this protected amino acid is not now attributed: (a) to the reduction of the intramolecular conformational exchange rate, due to the effect of intramolecular hydrogen bonding of the hydroxy part of the carboxyl with the carbonyl oxygen of the Boc-group, and (b) to the effect of solvent viscosity, suggested in the mentioned study. The cause of this phenomenon is now attributed to a strong hydrogen bonding of the polar proton acceptor solvent DMSO with the carboxy group, which effectively reduces the proton exchange rate, thus becoming slow on the ¹⁷O NMR time scale.     

Effects of partial anion substitution on the thermoelectric properties of silver(I) chalcogenide halides in the system Ag5Q2X with Q=Te, Se and S and X=Br and Cl

A selection of mixed conducting silver chalcogenide halides of the general formula Ag₅Q₂X with Q=sulfur, selenium and tellurium and X=chlorine and bromine has been investigated due to their thermoelectric properties. Recently, the ternary counterpart Ag₅Te₂Cl showed a defined d¹⁰-d¹⁰ interaction in the disordered cation substructure at elevated temperatures where Ag₅Te₂Cl is present in its high temperature α-phase. A significant drop of the thermal diffusivity has been observed during the β−α phase transition reducing the values from 0.12 close to 0.08 mm² s⁻¹. At the same transition the thermopower reacts on the increasing silver mobility and jumps towards less negative values.Thermal conductivities, thermopower and thermal diffusivity of selected compounds with various grades of anion substitution in Ag₅Q₂X were determined around the silver-order/disorder β−α phase transition. A formation of attractive interactions could be observed for selenium substituted phases while no effect was detected for bromide and sulfide samples. Depending on the grade and type of substitution the thermopower changes significantly at and after the β−α phase transition. Thermal conductivities are low reaching values around 0.2-0.3 W m⁻¹ K⁻¹ at 299 K. Partial anion exchange can substantially tune the thermoelectric properties in Ag₅Q₂X phases.     

The effect of polyether ligands on the solution structure of [Li]-α-(phenylthio)benzyllithium in tetrahydrofuran: A H,Li-HOESY NMR study

[⁶Li]-α-(phenylthio)benzyllithium 1-⁶Li was studied in THF/[D₈]THF solution (1:1) in the presence of several acyclic and cyclic polyether ligands by ¹H,⁶Li-HOESY, ¹H and ¹³C NMR spectroscopy. The question whether these ligands are bonded to lithium or not is important for physical–organic investigations as well as for studies of the ground state of (stereoselective) reactions of organolithium compounds in the presence of such ligands. Dimethoxyethane is not bonded to lithium under these conditions. The acyclic ethers diglyme and triglyme coordinate only weakly to the organolithium compound and form contact ion pairs (CIPs) at 25°C. At −80°C, CIPs are in equilibrium with separated ion pairs (SIPs). Very stable complexes of 1-⁶Li are obtained with crown ether ligands. Addition of 12-crown-4 and 15-crown-5, respectively, results in the exclusive formation of SIPs at 25°C and −80°C. With 18-crown-6, a CIP–SIP equilibrium is observed at 25°C which is shifted entirely to the SIP side at −80°C. Graphical analyses of the ¹H and ¹³C NMR spectra of the polyether complexes of 1-⁶Li revealed correlations between the chemical shifts of the para phenyl carbon C-5, the para phenyl proton H-5, the benzylic carbon C-1, and the proton–carbon coupling constant J(C-1,H-1) of 1-Li, which are useful probes for the charge distribution within the carbanionic moiety of 1-⁶Li in the respective complexes, and thus for the ion pair character as a function of the polyether complexation of lithium.