A one-pot synthesis and 1,3-dipolar cycloaddition of [1,2]dithiolo[4,3-b]indole-3(4H)-thiones

Treatment of N-substituted 2-methyl-1H-indoles 1 with S₂Cl₂ and DABCO in chloroform gave the corresponding [1,2]dithiolo[4,3-b]indole-3(4H)-thiones 5 by the addition of triethylamine in high yield. 1,2-Dithiole-3-thiones 5 underwent cycloaddition with one or two DMAD equivalents to afford either 2-(3-thioxo-1,3-dihydro-2H-indol-2-ylidene)-1,3-dithioles 10 or fused 4,5-dihydrothiopyrano[3,2-b]indoles 9.     

Regioselective cyclization of unsymmetrical dicyanoanilines to novel 2,3-bifunctionalised indole regioisomers and their use in the synthesis of 4,5-dihydro[1,3]oxazino[5,4-b]indole-6-carbonitriles

Synthesis of novel-2,3-bifunctionalised indole regioisomers (2/3 and 6/7) from unsymmetrical dicyanoanilines 1 by regioselective cyclization in two independent ways. Regioisomers 6 are further utilized in synthesis of novel 4,5-dihydro[1,3]oxazino[5,4-b] indole-6-carbonitriles 9.     

Synthesis of fluorine containing glycolurils and oxazolines from oxides of internal perfluoroolefins

The reaction of oxides of internal perfluoroolefins 1-3 with urea gave two kinds of novel fluorine containing N-heterocyclic compounds depending on the solvent nature: 1,5-bis(perfluoroalkyl)tetraazabicyclo[3.3.0]octane-3,7-diones 4a-c and 2-amino-5-fluoro-4,5-bis(perfluoroalkyl)-4,5-dihydrooxazol-4-ols 7a-d. Use of polar dimethylsulfoxide, N,N-dimethylacetamide and acetonitrile afforded glycolurils 4a-c in moderate yields. In dioxane, unexpected cyclization occurred resulting in oxazolines 7a-d in high yields. A similar reaction of oxiranes 2, 3 with urea in aqueous dioxane gave mixtures of 4,5-dihydroxy-4,5-bis(perfluoroalkyl)imidazolidine-2-ones 9b, c, glycolurils 4b, c and oxazolines 7b-d. The molecular structure of trans-isomers of oxazoline 7b and imidazolidine 9b has been established by X-ray crystallography.     

Synthesis of 4-substituted azepino[3,4-b]indole-1,5-diones

Mono- or dibromo derivatives 2 and 3 were prepared by an efficient two-step route from 10-methyl-azepino[3,4-b]indole-1,5-dione 1. Elimination reaction on 2 gave access to 4-bromo-10-methyl-2H,10H-azepino[3,4-b]indole-1,5-diones 4. Finally, 4-substituted 10-methyl-2H,10H-azepino[3,4-b]indole-1,5-diones 6-14 were synthesised in good yields from 4 via palladium-mediated cross-coupling reactions.     

A novel synthesis of aryl tethered imidazo[4,5-b]pyrazin-2-ones through in situ ring construction and contraction

An innovative synthesis of aryl tethered 1,3-dimethylimidazo[4,5-b]pyrazin-2-ones 4 and 6 has been delineated through base catalyzed ring transformation of 6-aryl-4-(piperidin-1-yl)-2H-pyran-2-one-3-carbonitriles 1 and methyl 6-aryl-4-methylsulfanyl-2H-pyran-2-one-3-carboxylates 5 with 7-acetyl-1,3-dimethyllumazine 2 with subsequent ring contraction of the fused pyrimidine to an imidazole ring. An additional product, methyl [6-(1,3-dimethyl-2-oxo-2,3-dihydro-1H-imidazo[4,5-b]pyrazin-5-yl)-4-thiophen-2-ylpyran-2-ylidene]acetate 8b, was also isolated from the reaction of 5 and 2, as a minor constituent.     

Tri-component reaction of 2-alkyl-4,5-dichloropyridazin-3(2H)-ones: synthesis of 5-cyano-5-(pyrimidin-2-yl)-2,7-dialkyl-5H-dipyridazino-[4,5-b:4,5-e]-4H-thiopyran-1,6-dione and 2-(4-cyanophenoxy) pyrimidine

Reaction of 2-alkyl-4,5-dichloropyridazin-3(2H)-ones with p-cyanophenol and 2-mercaptopyrimidine in the presence of base gave 2,4,5-trisubstituted-pyridazin-3(2H)-ones 4-9, 2-(4-cyanophenoxy)pyrimidine (10) and 5-cyano-5-(pyrimidin-2-yl)-2,7-dialkyl-5H-dipyridazino[4,5-b:4,5-e]-4H-thiopyran-1,6-diones 11 as a novel heterocycle.     

Stabilization of (N-methyleneamino)imidoylketenes: synthesis of dipyrazolo[1,2-a;1′,2′-d][1,2,4,5]tetrazines

Thermolysis of substituted methyl 1-methyleneamino-4,5-dioxo-4,5-dihydro-1H-pyrrole-2-carboxylates 2a,b led to substituted dimethyl 3,9-dioxo-1,5,7,11-tetrahydro-1H,7H-dipyrazolo[1,2-a;1′,2′-d][1,2,4,5]tetrazine-1,7-dicarboxylates 4a,b and methyl 2,5-dihydro-5-oxo-1H-pyrazole-3-carboxylates 5a,b as minor products. The structure of compound 4a was determined by X-ray crystallography. The proposed mechanism of this conversion includes generation of (N-methyleneamino)imidoylketenes 6a,b and its intramolecular transformation to azomethine imines—5-oxo-2,5-dihydropyrazole-1-methylium-2-ides 7a,b, which undergo dimerization in head-to-tail manner yielding products 4a,b and partially hydrolyse to compounds 5a,b.     

A convenient synthesis of benzofuro[3,2-c]isoquinolines and naphtho[1′,2′:4,5]furo[3,2-c]isoquinolines

A convenient method for the preparation of benzofuro[3,2-c]isoquinoline derivatives is described. The condensation reaction of methyl 2-(chloromethyl)-benzoate with substituted salicylonitriles 7a-c and intramolecular cyclization of the resulting substituted methyl 2-[(2-cyanobenzyl)oxy]benzoates 10a-c using potassium tert-butoxide results in the substituted benzofuro[3,2-c]isoquinolin-5(6H)-ones 1a-c. The same sequence of reactions starting from 2-(chloromethyl)benzonitrile and compounds 7a-c gave substituted 5-aminobenzofuro[3,2-c]isoquinolines 13a-c. In addition, this method is useful for the synthesis of other heterocycles. For example, using 1-cyano-2-naphthol 16, instead of the salicylonitriles 7a-c, gives naphtho[1′,2′:4,5]furo[3,2-c]isoquinolines.     

Solid-state and solution photocycloadditions of 4-acyloxy-2-pyrones with maleimide

Solid-state photosensitized reactions of 4-acyloxy-2-pyrones (1b,c) with maleimide (2) afforded endo-endo double-[4+2] cycloadducts (3b,c) with high stereoselectivity. Sensitized photoreactions of 1a-d with 2 in solution gave exo-endo double-[4+2] cycloadducts (4a-d). 2-Pyrones 1a-d were photolyzed to give carboxylic acids (5a-d) via their valence isomerization in the solid state and in solution. Such kinds of photoreaction of the 4-acyloxy-2-pyrones were dramatically different from regio- and stereoselective [2+2] cycloadditions of 4-alkyloxy-2-pyrones. The photoreaction mechanisms of 1 with 2 and 1 itself were analyzed by powder X-ray diffraction analysis and MO calculations.     

Synthesis of an acyclic nucleoside analog of highly fluorescent luminarosine

Photoirradiation of 1-{9-[(2-acetoxyethoxy)methyl]-9H-purin-6-yl}-pyridinium chloride (1b) in aqueous solution leads to two photoproducts, namely 1-{5-formamido-6-[(2-acetoxyethoxy)methylamino]pyrimidin-4-yl}pyridinium chloride (2b) and 1-(6-(acetoxymethyl)-5,5a,6,8-tetrahydrooxazolo[4,3-e]purin-4-yl)pyridinium chloride (6), which constitutes a new heterocyclic system. Further, photosensitized irradiation of 2b gave the desired acyclic nucleoside analog of the highly fluorescent luminarosine 3b.     

Synthesis and properties of 3-arylcyclohepta[4,5]imidazo[1,2-a]-1,3,5-triazine-2,4(3H)-diones and related compounds: photo-induced autorecycling oxidation of some amines

Novel 3-phenyl- and 3-(4-nitrophenyl)cyclohepta[4,5]imidazo[1,2-a]-1,3,5-triazine-2,4(3H)-diones and the corresponding imino derivatives 5a,b and 6a,b were synthesized in modest to moderate yields by the abnormal and normal aza-Wittig reaction of 2-(1,3-diazaazulen-2-ylimino)triphenylphosphorane with aryl isocyanates and subsequent heterocyclization reaction with a second isocyanate. The related cationic compound, 1-methyl-3-phenylcyclohepta[4,5]imidazo[1,2-a]-1,3,5-triazine-2,4(3H)-dionylium tetrafluoroborate 7a, was also prepared. The electrochemical reduction of these compounds exhibited more positive reduction potentials as compared with those of the related compounds of 3,10-disubstituted cyclohepta[4,5]pyrrolo[2,3-d]pyrimidine-2,4(1H,3H)-dione systems. In a search of the oxidizing ability, compounds 5a, 6a, and 7a were demonstrated to oxidize some amines to give the corresponding imines in more than 100% yield under aerobic and photo-irradiation conditions, while even benzylamine was not oxidized under aerobic and thermal conditions at 100 °C. The oxidation reactions by cation 7a are more efficient than that by 5a and 6a. Quenching of the fluorescence of 5a was observed, and thus, the oxidation reaction by 5a probably proceeds via electron-transfer from amine to the excited singlet state of 5a. In the case of cation 7a, the oxidation reaction is proposed to proceed via formation of an amine-adduct of 7a and subsequent photo-induced radical cleavage reaction.     

Convenient synthesis of 3-fluoro-4,5-diphenylfuran-2(5H)-one from benzoin ethers : Novel and efficient Z-E isomerisation and cyclisation of 2-fluoroalkenoate precursors, substitution of vinylic fluorine

Mixtures of ethyl (E)- and (Z)-4-alkoxy-2-fluoro-3,4-diphenylbut-2-enoates (6-8) prepared from benzoin ethers and ethyl 2-(diethoxyphosphoryl)-2-fluoroacetate were transformed in high yields to the target 3-fluoro-4,5-diphenylfuran-2(5H)-one (14) using bromine in tetrachloromethane at room temperature. The non-cyclisable Z-isomers 6b-8b were gradually isomerised to the cyclisable E-isomers 6a-8a during the process. The reaction of the (E)-butenoates 6a-8a with boron trifluoride led to furanone 14, while in Z-isomers 6b-8b both alkoxy group and vinylic fluorine were substituted with bromine during the reaction. Mechanisms for both complex reactions have been proposed. Furanone 14 was transformed to 2-[tert-butyl(dimethyl)silyloxy]-3-fluoro-4,5-diphenylfuran (18) as a novel building block.     

The first synthesis of secondary sugar sulfonic acids by nucleophilic displacement reactions

The 4-deoxy-4-C-sulfonic acid and 6-deoxy-6-C-sulfonic acid derivatives of methyl α-d-gluco- and α-d-galactopyranosides were prepared by triflate-mediated nucleophilic displacement reactions, either with NaHSO₃ or with AcSK. The triflate esters of methyl 2,3,4-tri-O-benzyl- 1, methyl 2,3,6-tri-O-benzyl-α-d-glucopyranoside 9 and methyl 2,3,6-tri-O-benzyl-α-d-galactopyranoside 5 provided methyl 6-deoxy-6-C-sulfo-α-d-glucopyranoside 4, methyl 4-deoxy-4-C-sulfo-α-d-galactopyranoside 12 and α-d-glucopyranoside 8, respectively. The triflate derivative of methyl 2,3,4-tri-O-benzyl-α-d-galactopyranoside 13 gave methyl 3,6-anhydro-2,4-di-O-benzyl-α-d-galactopyranoside 14. Formation of the 3,6-anhydro derivative was prevented by using 3,4-O-isopropylidene acetal protection to obtain methyl 6-deoxy-6-C-sulfo-α-d-galactopyranoside 19. The aim of the research is to replace the sulfate esters by sulfonic acids in the repeating oligosaccharide units of glycosaminoglycans or in different oligosaccharide ligands.     

Synthesis of new biologically active isothiazolo[4,5-b]carbazole-type tetracyclic derivatives via an indole-2,3-quinodimethane approach

A number of isothiazolo[4,5-b]carbazole derivatives were prepared via a Diels–Alder approach involving thermally induced indole-2,3-quinodimethane intermediates. Preliminary biological tests revealed a GSK-3β kinase inhibitor (29) and some free NH group containing compounds (17d, 19c, 29) displayed selective human carbonic anhydrase I inhibitory activities.     

Functionalization of C60 via organometallic reagents

The reaction of [60]fullerene with organolithium and Grignard reagents carrying orthoester, acetal or other end groups yielded adducts 3-5 at the 6-6 bond of C60 after quenching with trifluoroacetic acid. The adducts could be easily methylated or benzylated with methyl iodide or benzyl bromide in the presence of potassium tert-butoxide to yield exclusively the 1,4-disubstituted C60 6 and 7a,b. Cleavage of the orthoester, acetal and silylether groups gave the corresponding carboxylic acid 9, aldehydes 10a,b and 11 and alcohols 12 and 13a,b. The carboxylic acid 9 readily reacted with alanine ethyl ester under standard peptide coupling conditions to give 14 in 55% yield. Attempts to generate a silyl enol ether from the reaction of aldehyde 10b with TIPSOTf and triethylamine failed. Instead the reaction led to a cyclized ether 16a (or alcohol 16b in the absence of silylating agent) resulting from the addition of an initially formed fulleride anion to the aldehyde group. The corresponding acetal 4b reacted similarly. The reaction of aldehyde 10b with aniline also gave a cyclized product 19. Surprisingly, aldehyde 11, which no longer carried an acidic fullerene proton reacted with aniline to give a product 20 resulting from an intramolecular Diels-Alder reaction followed by aromatization of a primarily formed N-phenylimine. Alcohol 13b could be readily converted to the corresponding bromide using tetramethyl-α-bromoenamine. The bromide was reacted with the carbanion derived from the protected glycine derivative to yield the diastereomeric fullerene amino acid derivatives 1-benzyl-4-[α-propyl-tert-butylglycinate benzophenone imine] 1,4-dihydro[60]fullerenes 24a and 24b.     

[4+2] Cycloaddition reactions of 4-sulfur-substituted 2-pyridones with electron-deficient dienophiles

[4+2] Cycloaddition reactions of 4-(phenylthio)-1-tosyl-2-pyridone (6a) and 4-(phenylsulfonyl)-1-tosyl-2-pyridone (6b) with electron-deficient dienophiles 7 (N-methylmaleimide, N-phenylmaleimide, and methyl acrylate) gave new isoquinuclidine products 8-10. The N-tosyl group of 6a and 6b was also efficiently converted to N-alkyl derivatives 6c-f, which showed different stereoselectivity toward reactions with dienophiles 7. Several other dienophiles 15 (dimethyl acetylenedicarboxylate, methyl vinyl ketone, ethyl vinyl ether, and methyl methacrylate) were found not to react with 6a or 6b, but led to the formation of tosyl migration products 4-(phenylthio)-O-tosyl-pyridinol (16a) and 4-(phenylsulfonyl)-O-tosyl-2-pyridinol (16b), respectively. The reactivity, regioselectivity, and stereoselectivity of the cycloaddition reactions were also compared with semi-empirical calculations.     

Activation of C-H and C-Br bonds in cyclopalladation reactions of Schiff base ligands: Influence of the benzylidene ring substituents

Reaction of Pd(AcO)₂ with the Schiff base ligands 2-Br-4,5-(OCH₂O)C₆H₂C(H)N(Cy) (a) and 4,5-(OCH₂CH₂)C₆H₃C(H)N(Cy) (b) leads to the cyclometallated compounds [Pd{2-Br-4,5-(OCH₂O)C₆HC(H)N(Cy)-C6,N}(μ-O₂CMe)]₂ (1a) and [Pd{4,5-(OCH₂CH₂)C₆H₂C(H)N(Cy)-C6,N}(μ-O₂CMe)]₂ (1b), respectively, via C-H activation. Treatment of a with Pd₂(dba)₃ gave [Pd{4,5-(OCH₂O)C₆H₂C(H)N(Cy)-C2,N}(μ-Br)]₂ (6a), via C-Br activation. The metathesis reaction of 1a and 1b with aqueous sodium chloride gave the corresponding cyclopalladated dimers with bridging chloride ligands, 2a and 2b, respectively. Treatment of the halogen-bridged compounds with tertiary tri- and diphosphines in the appropriate molar ratio gave the mono and dinuclear compounds 3a-5a, 7a-9a and 3b-5b. The structure of compounds 3a, 4a, 5a, 8a, 2b, 3b and 5b has been determined by X-ray diffraction analysis.     

Efficient syntheses of thiadiazoline and thiadiazole derivatives by the cyclization of 3-aryl-4-formylsydnone thiosemicarbazones with acetic anhydride and ferric chloride

3-Aryl-4-formylsydnone 4′-phenylthiosemicarbazones 3a-d and 3-aryl-4-formylsydnone thiosemicarbazones 3e-h are effective precursors of sydnonyl-substituted heterocycles. The thiosemicarbazones 3a-d reacted with acetic anhydride (4a) to give 4-acetyl-2-phenylamino-5-(3-arylsydnon-4-yl)-4,5-dihydro-[1,3,4]thiadiazoles 5a-d and 4-acetyl-2-(N-phenylacetamido)-5-(3-arylsydnon-4-yl)-4,5-dihydro-[1,3,4]thiadiazoles 6a-d. However, under similar method, thiosemicarbazones 3e-h produced only 4-acetyl-2-acetamido-5-(3-arylsydnon-4-yl)-4,5-dihydro-[1,3,4]thiadiazoles 6e-h in high yield. The sydnonyl-substituted thiadiazole derivatives 7a-h were also obtained successfully by the cyclization of 3-aryl-4-formylsydnone thiosemicarbazones 3a-h with ferric chloride (4b). In the cyclization, the thiosemicarbazones 3a-d are more reactive than the thiosemicarbazones 3e-h.     

Synthesis of sulfur containing analogues of the soluble guanylate cyclase inhibitor 8-bromo-4H-[1,2,4]oxadiazolo[3,4-c][1,4]benzoxazin-1-one NS2028

Sulfur analogues of the soluble guanylate cyclase (sGC) inhibitor NS2028 1a are synthesized. Treating 8-bromo-2H-benzo[b][1,4]oxazin-3(4H)-one oxime (6) with 1,1′-thiocarbonyldiimidazole (1.1 equiv) gave the carbamothioate 8-bromo-4H-[1,2,4]oxadiazolo[3,4-c][1,4]benzoxazine-1-thione (3a) in 83% yield. Alternatively reacting NS2028 1a with P₂S₅ (0.5 equiv) affords the carbamothioate 3a in 80% yield. Similar treatment of 8-aryl substituted NS2028 analogues 1b-d with P₂S₅ gave the carbamothioates 3b-d in 64-91% yields. Although quite stable, the carbamothioates 3a-d could be thermally isomerized in the presence of Cu (10 mol %) to afford the thiocarbamates 4a-d in high yields. Interestingly, in the case of carbamothioate 3a Pd and In metals also facilitated the isomerization. Furthermore, treatment of the thiocarbamates 4a-d with P₂S₅ (0.5 equiv) affords the carbamodithioates 5a-d in 72-89% yields. All new compounds are fully characterized including single crystal X-ray data for carbamothioate 3a and thiocarbamate 4a. Finally, a mechanism is proposed for the carbamothioate to thiocarbamate isomerization.     

Synthesis and properties of novel methanofullerenes having ethylthienyl and/or n-pentyl group for photovoltaic cells

Novel methanofullerenes 3 having ethylthienyl and/or n-pentyl groups were designed and synthesized for the purpose of developing new acceptors for an organic photovoltaic cell with higher performance than that of the [6,6]-phenyl-C₆₁-butylic acid methyl ester (PCBM) used as the standard acceptor. The electronic absorption spectra and cyclic voltammetry (CV) of 3, PCBM, and [6,6]-(thiophene-2-yl)-C₆₁-butylic acid methyl ester (ThCBM) were measured to estimate solubility and reduction potentials as characteristics of n-type semiconductor for organic photovoltaic devices. The CV measurements revealed reversible reduction waves for all of the methanofullerenes and the first reduction potentials of the n-pentyl-substituted 1-(5-ethylthiophene-2-yl)-[6,6]-methanofullerene[60] (3b) and 1-phenyl-[6,6]-methanofullerene[60] (3c) were negatively shifted compared to those of the corresponding terminal methyl ester-substituted homologues (3a and PCBM). The performances of photovoltaic devices consisting of 3b and 3c were slightly higher than those of PCBM.