Phosphoric-based ionic liquids as solvents to separate the azeotropic mixture of ethanol and hexane

Ethanol and hexane mixtures are present in industrial processes producing oxygenated additives for unleaded gasoline. The separation of ethanol and hexane is important but challenging due to the formation of an azeotropic mixture. This research focuses on the study of phosphoric-based ionic liquids (ILs) as green solvents for the separation of ethanol from hexane in a liquid extraction process. The knowledge of the (liquid + liquid) equilibrium (LLE) of this mixture is essential for the design of the extraction separation technique. Hence, the experimental determination of the LLE data for the ternary system {ethanol + hexane + 1,3-dimethylimidazolium dimethylphosphate ([MMIM][DMP])}, {ethanol + hexane + 1-ethyl-3-methylimidazolium diethylphosphate ([EMIM][DEP])} and {ethanol + hexane + 1-butyl-3-methylimidazolium dibutylphosphate ([BMIM][DBP])} at T = 303.2 K and atmospheric pressure was carried out. The reliability of the experimental LLE data was confirmed by applying the Othmer–Tobias and Hand equations, and the NRTL model was used to correlate the experimental results for the studied ternary system. The solute distribution ratio and selectivity, derived from the experimental LLE data, were calculated and analyzed evaluate the capacity of the investigated ILs as solvents in liquid extraction process. This capacity was also compared with that of other ILs. The experimental results show that the studied ILs can be suitable solvents in a (liquid + liquid) extraction for the separation of azeotropic mixtures of ethanol and hexane.     

Fluorous ionic liquids as solvents for the liquid-liquid extraction of metal ions by macrocyclic polyethers

The predominant mode of strontium ion transfer from aqueous nitrate media into a series of 1-fluoroalkyl-3-methylimidazolium bis[(trifluoromethylsulfonyl)]imides containing dicyclohexano-18-crown-6 (DCH18C6) is shown to shift from cation exchange to strontium nitrato-crown ether complex partitioning as the length of the fluoroalkyl substituent is increased. Fluoroalkyl substituents are shown to be only slightly more effective than their non-fluorous analogs at inducing this shift. At the same time, the fluorinated ionic liquids (ILs) yield strontium distribution ratios as much as an order of magnitude lower than the corresponding 1-alkyl-3-methylimidazolium (C_nmim⁺) salts. Fluorous ILs thus appear to offer no compelling advantages over C_nmim⁺ ionic liquids as extraction solvents.     

Magnetic ionic liquids as non-conventional extraction solvents for the determination of polycyclic aromatic hydrocarbons

This work describes the applicability of magnetic ionic liquids (MILs) in the analytical determination of a group of heavy polycyclic aromatic hydrocarbons. Three different MILs, namely, benzyltrioctylammonium bromotrichloroferrate (III) (MIL A), methoxybenzyltrioctylammonium bromotrichloroferrate (III) (MIL B), and 1,12-di(3-benzylbenzimidazolium) dodecane bis[(trifluoromethyl)sulfonyl)]imide bromotrichloroferrate (III) (MIL C), were designed to exhibit hydrophobic properties, and their performance examined in a microextraction method for hydrophobic analytes. The magnet-assisted approach with these MILs was performed in combination with high performance liquid chromatography and fluorescence detection. The study of the extraction performance showed that MIL A was the most suitable solvent for the extraction of polycyclic aromatic hydrocarbons and under optimum conditions the fast extraction step required ∼20 μL of MIL A for 10 mL of aqueous sample, 24 mmol L⁻¹ NaOH, high ionic strength content of NaCl (25% (w/v)), 500 μL of acetone as dispersive solvent, and 5 min of vortex. The desorption step required the aid of an external magnetic field with a strong NdFeB magnet (the separation requires few seconds), two back-extraction steps for polycyclic aromatic hydrocarbons retained in the MIL droplet with n-hexane, evaporation and reconstitution with acetonitrile. The overall method presented limits of detection down to 5 ng L⁻¹, relative recoveries ranging from 91.5 to 119%, and inter-day reproducibility values (expressed as relative standard derivation) lower than 16.4% for a spiked level of 0.4 μg L⁻¹ (n = 9). The method was also applied for the analysis of real samples, including tap water, wastewater, and tea infusion.     

(Liquid + liquid) extraction of methanol from alkanes using dialkylphosphate-based ionic liquids as solvents

In this work, the feasibility of ionic liquids (ILs), 1,3-dimethylimidazolium dimethylphosphate ([MMIM][DMP]), 1-ethyl-3-methylimidazolium diethylphosphate ([EMIM][DEP]), and 1-butyl-3-methylimidazolium dibutylphosphate ([BMIM][DBP]), as solvents for the extraction of methanol from its mixtures with hexane and heptane was analyzed. The knowledge of (liquid + liquid) equilibria (LLE) of these mixtures is necessary for the design of the extraction separation process. Hence, the LLE data for the ternary systems, {methanol + hexane + ([MMIM][DMP], or [EMIM][DEP], or [BMIM][DBP])}, and {methanol + heptane + ([MMIM][DMP], or [EMIM][DEP], or [BMIM][DBP])}, were measured at T = 298.2 K and atmospheric pressure. The experimental results were correlated with the thermodynamic nonrandom two-liquid (NRTL) model. The solute distribution ratios of methanol and methanol/alkane selectivities, derived from the experimental LLE data, were calculated and analyzed to evaluate the capability of the studied ILs to accomplish the separation target. Meanwhile, these capabilities were also compared with that of other ILs obtained from the literature.     

Dissolution and regeneration of polybenzimidazoles using ionic liquids

We report here the initial results that polybenzimidazole can be dissolved in and regenerated from, 1-butyl-3-methylimidazolium chloride and other hydrophilic ionic liquids, which may enable the application of ionic liquids as alternatives to environmentally undesirable solvents currently used for dissolution of this polymer.     

Cation effect of ammonium imide based ionic liquids in alcohols extraction from alcohol-alkane azeotropic mixtures

During recent last years, outstanding properties of ionic liquids such as low melting point, large liquid range and negligible volatility have turned them into possible volatile organic solvents replacers to break alcohol-alkane azeotropic mixtures. On this basis, two ionic liquids, butyltrimethylammoniumbis(trifluoromethylsulfonyl)imide, [BTMA][NTf₂], and tributylmethylammoniumbis(trifluoromethylsulfonyl)imide, [TBMA][NTf₂], were studied through ternary liquid+liquid equilibrium (LLE) of {alkane(1) + alcohol (2) + IL(3)} at T = 298.15 K and atmospheric pressure in order to consider the effect of ionic liquid cation alkyl chain length on the extraction process.The ILs capability as azeotrope breakers was determined by the calculation of parameters such as solute distribution ratio, β, and selectivity, S and this capability was compared with other bis (trifluoromethylsulfonyl)imide based ionic liquids from literature. The consistency of tie-line data was ascertained by applying the Othmer–Tobias and Hand equations. Finally, the experimental LLE were correlated by the Non Random Two Liquid (NRTL) thermodynamic model.     

Recent advances in the use of ionic liquids as solvents for protein-based materials and chemistry

Proteins are a diverse class of molecules that can act as catalysts and structural components. Interest in their interactions with ionic solvents is on the increase due to the tuneable possibilities for non-aqueous biocatalysis, improved thermostability of biomaterials, and possible roles in medicine, such as drug delivery and use as cell-growth scaffolds. We summarise here the recent examples of these exciting new aspects of protein-ionic solvent interactions, highlighting future directions.     

Thermophysical properties and thermodynamic phase behavior of ionic liquids

The thermal stability of many tested ionic liquids (ILs) was investigated by the TGA and DTA curves over the wide temperature range from 200 to 780 K. The TGA curves have mainly a sigmoid shape, which can be split into three segments. The thermal decomposition of the samples was higher than 500 K. For the ammonium salts, C₂BF₄, or C₂PF₆, or C₂N(CN)₂, or C₄Br, the temperatures of the decompositions were 583.5, 556.1, 545.1 and 525.3 K, respectively. Generally, it was found that the temperature of decomposition of investigated ionic liquid is strongly depended on the type of cation and the anion. Phase equilibria and thermophysical constants were measured also for the dialkoxy-imidazolium ILs, [(C₄H₉OCH₂)₂IM][BF₄], [(C₈H₁₇OCH₂)₂IM][Tf₂N], [(C₁₀H₂₁OCH₂)₂IM][Tf₂N] and for pyridinium IL, [Pyr][BF₄].The characterization and purity of the compounds were obtained by the elemental analysis, water content (Fisher method) and differential scanning microcalorimetry (DSC) analysis. From (DSC) method, the melting points, the enthalpies of fusion, the temperatures and enthalpies of solid-solid phase transitions and the half C_p temperatures of glass transition of all investigated ionic liquids were measured.The phase equilibria of these salts with common popular solvents: water, or alcohols or n-alkanes, or aromatic hydrocarbons have been measured by a dynamic method from 290 K to the melting point of IL, or to the boiling point of the solvent in the whole mole fraction range, x from 0 to 1.These salts mainly exhibit simple eutectic systems with immiscibility in the liquid phase with upper critical solution temperatures (UCST), not only with aromatic hydrocarbons, cycloalkanes and n-alkanes but also with longer chain alcohols. For example the C₂BF₄ salt show simple eutectic system with water and simple eutectic systems with immiscibility in the liquid phase with upper critical solution temperature with alcohols.The solid-liquid phase equilibria, SLE curves were correlated by means of the different G^Ex models utilizing parameters derived from the SLE. The root-mean-square deviations of the solubility temperatures for all calculated data depend on the particular system and the equation used.     

Ultrasonication-assisted extraction and preconcentration of medicinal products from herb by ionic liquids

Ionic liquid-based extraction of medicinal or useful compounds from plants was investigated as an alternative to supercritical fluid, cloud point and conventional organic solvent extractions. The method integrated extraction and preconcentration. Medicinal products were first extracted by an ionic liquid solution, part of which was then converted to a hydrophobic form by anion metathesis for preconcentration. The remaining soluble ionic liquid acted as a dispersive agent to enhance the efficiency of preconcentration. Protein in the extract was precipitated spontaneously without addition of further solvents. Ultrasonication assisted this method for extraction and preconcentration of cryptotanshinone, tanshinone I and tanshinone II A from Salvia Miltiorrhiza Bunge. 0.233 mg g⁻¹, 0.695 mg g⁻¹ and 0.682 mg g⁻¹ of each, respectively, were extracted using [OMIM][Cl], and preconcentrated in a [OMIM][PF₆] phase at respective concentrations of 148.1, 507.1 and 486.1 μg mL⁻¹. The method exhibited potential applicability with other medicinal products.     

Variation in the regioselectivity of levulinic acid bromination in ionic liquids

The reaction of levulinic acid and its esters with bromine in ionic liquids results in the formation of 3-bromo derivatives as the major products and not the 5-bromo substituted isomers, which are typically formed in organic solvents. The bromination of levulinic acid in ionic liquids in the presence of urea leads to the formation of 5-bromolevulinic acid.     

N-butylpyridinium bis-(trifluoromethylsulfonyl)imide ionic liquids as solvents for the liquid-liquid extraction of aromatics from their mixtures with alkanes: Isomeric effect of the cation

The liquid-liquid equilibria (LLE) of four ternary systems comprising toluene, heptane, and an ionic liquid with the cation N-butylpyridinium ([bpy]), or 2-methyl-N-butylpyridinium ([2bmpy]), or 3-methyl-N-butylpyridinium ([3bmpy]), or 4-methyl-N-butylpyridinium ([4bmpy]), and the anion bis-(trifluoromethylsulfonyl)imide ([Tf₂N]) were determined at 313.2 K and atmospheric pressure. The distribution ratios and the separation factor curves from the LLE data were plotted and compared to those for sulfolane. The results show no significant differences in the values of these parameters between [bpy][Tf₂N] and [2bmpy][Tf₂N], and between [3bmpy][Tf₂N] and [4bmpy][Tf₂N]. The experimental LLE data were satisfactorily correlated by means of the thermodynamic NRTL model.     

The Baeyer-Villiger oxidation of ketones with Oxone in the presence of ionic liquids as solvents

Cyclic and linear ketones were readily oxidised with Oxone^® at 40 °C in ionic liquids as solvents and short times (2.5-20 h), affording their corresponding lactones and esters in high yields (65-95%). Both, aprotic and protic ionic liquids were used. The best conversion of ketones and the highest yields of products were obtained with 1-buty-3-methylimidazolium tetrafluoroborate and 1-methylimidazolium acetate as solvents. These ionic liquids were also efficiently recycled in the Baeyer-Villiger reaction without significant loss of activity. Several factors, such as the partial solubility of KHSO₅ in the ionic liquid, its viscosity and the presence of a proton in protic ionic liquids, have an influence on the course of the reaction.     

Description of the pVT behavior of ionic liquids and the solubility of gases in ionic liquids using an equation of state

A molecular thermodynamic model developed previously for fluids of chain-like molecules has been extended to correlate the pVT behavior of ionic liquids and the solubilities of gases such as CO₂, C₃H₆, C₃H₈, C₄H₁₀ in various ionic liquids. The relative deviation between the calculated molar volume and experimental data is less than 0.2%. It is shown that this equation of state can be used to correlate the solubility of CO₂ in ionic liquids with only one temperature-independent adjustable interaction parameter, and the accuracy of the correlation can be further improved using two temperature-independent adjustable parameters. The water content of ionic liquids has a large influence on the calculated results. For systems with water content lower than 0.1%, the average relative deviations of bubble point pressure are 3.14 and 4.90% using two parameters and one parameter, respectively. For systems containing C₃H₆, C₃H₈ and C₄H₁₀ two temperature dependent adjustable parameters are needed to obtain a good fit, and the corresponding deviation of the gas solubility is less than 2%, except for C₃H₈.     

Solid-phase extraction of room-temperature imidazolium ionic liquids from aqueous environmental samples

Owing to their favorable properties, ionic liquids have recently gained recognition as possibly environmentally benign solvents. Now among the most promising industrial chemicals, they have already been labeled green, but this appellation seems due entirely to their very low vapor pressure. This growing interest in the various applications of ionic liquids will soon result in their presence in the environment. Therefore, reliable analytical tools for the environmental analysis of ionic liquids need to be developed urgently. This paper presents a newly developed analytical procedure for the enrichment of 1-alkyl- and 1-aryl-3-methylimidazolium ionic liquids from water samples. The method is based on cation exchange solid-phase extraction followed by selective elution. Pre-concentrated samples are subjected to high-performance liquid chromatography (HPLC) with an advanced methodology for qualitative and quantitative analysis. The overall procedure was verified by using standard spiked samples of tap water, seawater, and freshwater.     

Highly selective GC stationary phases consisting of binary mixtures of polymeric ionic liquids

GC stationary phases composed of binary mixtures of two polymeric ionic liquids (PILs), namely, poly(1‐vinyl‐3‐hexylimidazolium) bis[(trifluoromethyl)sulfonyl]imide (poly(ViHIm‐NTf₂))/poly(1‐vinyl‐3‐hexylimidazolium) chloride (poly(ViHIm‐Cl)) and poly(1‐vinyl‐3‐hexadecylimidazolium) bis[(trifluoromethyl)sulfonyl]imide (poly(ViHDIm‐NTf₂))/poly(1‐vinyl‐3‐hexadecylimidazolium) chloride (poly(ViHDIm‐Cl)), were evaluated in terms of their on‐set bleed temperature and separation selectivity. A total of six neat or binary PIL stationary phases were characterized using the solvation parameter model to investigate the effects of the polymeric cation and anion and PIL composition on the system constants of the resulting stationary phases. The hydrogen bond basicity of the mixed poly(ViHIm‐NTf₂)/poly(ViHIm‐Cl) stationary phases was enriched linearly with the increase in the poly(ViHIm‐Cl) content. Results revealed that tuning the composition of the stationary phase allowed for fine control of the retention factors and separation selectivity for alcohols and carboxylic acids as well as selected ketones, aldehydes, and aromatic compounds. A reversal of elution order was observed for particular classes of analytes when the weight percentage of the chloride‐based PIL was increased.     

Application of ionic liquids in the microwave-assisted extraction of polyphenolic compounds from medicinal plants

Ionic liquids (ILs) solutions as solvents were successfully applied in the microwave-assisted extraction (MAE) of polyphenolic compounds from medicinal plants. ILs, its concentration and MAE conditions were investigated in order to extract polyphenolic compounds effectively from Psidium guajava Linn. (P. guajava) leaves and Smilax china (S. china) tubers. The results obtained indicated that the anions and cations of ILs had influences on the extraction of polyphenolic compounds as well as the ILs with electron-rich aromatic π-system enhanced extraction ability. Under the optimized conditions, the extraction yields of the polyphenolic compounds were in the range of 79.5-93.8% with one-step extraction, and meanwhile the recoveries were in the range of 85.2-103% with relative standard deviations (R.S.D.s) lower than 5.6%. Compared to conventional extraction procedures, the results suggested that the proposed method was effective and alternative for the extraction of polyphenolic compounds from medicinal plants. In addition, the extraction mechanisms and the structures of samples before and after extraction were also investigated. ILs solutions as green solvents in the MAE of polyphenolic compounds from medicinal plant samples showed a great promising prospect.     

Mercury extraction by ionic liquids: temperature and alkyl chain length effect

The preliminary results described here show the complete transfer of Hg(II) ions, in the absence of a chelating agent in 1-alkyl-3-methylimidazolium hexafluorophosphate ionic liquids; the lag time required to gain the quantitative metal ion partition turned out to be strongly dependent both on alkyl chain length on the imidazolium ring and on the working temperature.     

An in-depth look at the effect of Lewis acid catalysts on Diels-Alder cycloadditions in ionic liquids

The present work explores in detail the Diels-Alder reaction between cyclopentadiene and a series of dienophiles, performed in an innovative medium such as an ionic liquid. The potential activation of different Lewis acid catalysts and their load effect when used in combination with this solvent have been explored, in order to settle the improvement on rates and selectivities.     

Isothiouronium salts as useful and odorless intermediates for the synthesis of thiaalkylimidazolium ionic liquids

A simple and odorless route for the synthesis of monocationic and dicationic thiaalkylimidazolium ionic liquids (ILs) is reported. Our approach starts with the selective monoalkylation of dihalogenated substrates by methylimidazole derivatives, followed by the synthesis of odorless isothiouronium salts via reaction with thiourea. The target ILs are obtained after sequential hydrolysis-alkylation of the isothiouronium salts followed by anion metathesis in water. After extraction, the novel thiaalkylimidazolium ILs are obtained with high purity, without the requirement of additional purification steps. In order to demonstrate their applicability, two of these task-specific ILs were employed as ligands in Ullmann and Suzuki couplings and also as charged probes to detect copper intermediates via ESI(+)-MS.