Fluorescent blood glucose monitor by hemin-functionalized graphene quantum dots based sensing system

In the present work, a highly sensitive and specific fluorescent biosensor for blood glucose monitoring is developed based on hemin-functionalized graphene quantum dots (GQDs) and glucose oxidase (GOx) system. The GQDs which are simply prepared by pyrolyzing citric acid exhibit strong fluorescence and good water-solubility. Due to the noncovalent assembly between hemin and GQDs, the addition of hemin can make hydrogen peroxide (H₂O₂) to destroy the passivated surface of GQDs, leading to significant fluorescence quenching of GQDs. Based on this effect, a novel fluorescent platform is proposed for the sensing of glucose. Under the optimized conditions, the linear range of glucose is from 9 to 300 μM, and the limit of detection is 0.1 μM. As unique properties of GQDs, the proposed biosensor is green, simple, cost-efficient, and it is successfully applied to the determination of glucose in human serum. In addition, the proposed method provides a new pathway to further design the biosensors based on the assembly of GQDs with hemin for detection of biomolecules.     

Visible light induced efficient activation of persulfate by a carbon quantum dots (CQDs) modified γ-Fe2O3 catalyst

In this study, a carbon quantum dots modified maghemite catalyst (CQDs@γ-Fe₂O₃) has been synthesized by a one-step solvothermal method for efficient persulfate (PDS) activation under visible light irradiation. Transmission electron microscopy (TEM), scanning electron microscopy (SEM) and UV–vis diffuse reflectance spectroscopy (UV–vis DRS) characterization indicated that the formation of heterojunction structure between CQDs and γ-Fe₂O₃ effectively reduced the catalyst band gap (E_g), favoring the separation rate of electrons and holes, leading to remarkable efficient sulfamethoxazole (SMX) degradation as compared to the dark-CQDs@γ-Fe₂O₃/PDS and vis-γ-Fe₂O₃/PDS systems. The evolution of dissolved irons also demonstrated that CQDs could accelerate the in-situ reduction of surface-bounded Fe³⁺. Electron paramagnetic resonance (EPR) and radical scavenging experiments demonstrated that both OH and SO₄⁻ were generated in the reaction system, while OH was relatively more dominant than SO₄⁻ for SMX degradation. Finally, the reaction mechanism in the vis-CQDs@γ-Fe₂O₃/PDS system was proposed involving an effective and accelerated heterogeneous-homogeneous iron cycle. CQDs would enrich the photo-generated electrons from γ-Fe₂O₃, causing efficient interfacial generation of surface-bond Fe²⁺ and reduction of adsorbed Fe³⁺. This visible light induced iron cycle would eventually lead to effective activation of PDS as well as the efficient degradation of SMX.     

Application of photocatalytic cadmium sulfide nanoparticles to detection of enzymatic activities of glucose oxidase and glutathione reductase using oxidation of 3,3′,5,5′-tetramethylbenzidine

It was found out that semiconductor CdS nanoparticles (NPs) are able to catalyze photooxidation of the well known chromogenic enzymatic substrate 3,3′,5,5′-tetramethylbenzidine (TMB) by oxygen. The photocatalytical oxidation of TMB does not require hydrogen peroxide and its rate is directly proportional to the quantity of CdS NPs produced in situ through the interaction of Cd²⁺ and S²⁻ ions in an aqueous medium. This phenomenon was applied to development of colorimetric sensitive assays for glucose oxidase and glutathione reductase based on enzymatic generation of CdS NPs acting as light-powered catalysts. Sensitivity of the developed chromogenic assays was of the same order of magnitude or even better than that of relevant fluorogenic assays. The present approach opens the possibility for the design of simple and sensitive colorimetric assays for a number of enzymes using inexpensive and available TMB as a universal chromogenic compound.     

Visible light photoelectrochemical sensor for ultrasensitive determination of dopamine based on synergistic effect of graphene quantum dots and TiO2 nanoparticles

We have demonstrated a facile approach for fabricating graphene quantum dots–TiO₂ (GQDs–TiO₂) nanocomposites by a simple physical adsorption method. Compared with pure GQDs and TiO₂ nanoparticles (NPs), the as-prepared GQDs–TiO₂ nanocomposites showed enhanced photoelectrochemical (PEC) signal under visible-light irradiation. The photocurrent of GQDs–TiO₂/GCE was nearly 30-fold and 12-fold enhancement than that of GQDs/GCE and TiO₂/GCE, respectively, which was attributed to the synergistic amplification between TiO₂ NPs and GQDs. More interestingly, the photocurrent of GQDs–TiO₂ nanocomposites was selectively sensitized by dopamine (DA), and enhanced with the increasing of DA concentration. Further, a new PEC methodology for ultrasensitive determination of DA was developed, which showed linearly enhanced photocurrent by increasing the DA concentration from 0.02 to 105 μM with a detection limit of 6.7 nM (S/N = 3) under optimized conditions. This strategy opens up a new avenue for the application of GQDs-based nanocomposites in the field of PEC sensing and monitoring.     

Determination of abscisic acid based on the fluorescent quenching of quantum dots

The quenching mechanism of the fluorescence of quantum dots by abscisic acid has been systematically investigated.The quenching constant KSV = 5.1 × 1011 / M was obtained under the optimized condition.On the basis of that,a very sensitive method for the determination of abscisic acid has been developed.The linear equation was F0/F = 0.9309 + 0.5072 C(pmol/L) and its linear range was 0.2-3.0 pmol/L with a correlation coefficient of 0.9939.The limit of detection was 0.09 pmol/L.     

S-doped graphene quantum dots as nanophotocatalyst for visible light degradation

S-doped graphene quantum dots (S-GQDs) with well crystallization and monodispersity were prepared and applied as novel nanophotocatalyst for visible light degradation of basic fuchsin.     

Semiconductor quantum dots for bioanalysis

Semiconductor nanoparticles, or quantum dots (QDs), have unique photophysical properties, such as size-controlled fluorescence, have high fluorescence quantum yields, and stability against photobleaching. These properties enable the use of QDs as optical labels for the multiplexed analysis of immunocomplexes or DNA hybridization processes. Semiconductor QDs are also used to probe biocatalytic transformations. The time-dependent replication or telomerization of nucleic acids, the oxidation of phenol derivatives by tyrosinase, or the hydrolytic cleavage of peptides by proteases are probed by using fluorescence resonance energy transfer or photoinduced electron transfer. The photoexcitation of QD-biomolecule hybrids associated with electrodes enables the photoelectrochemical transduction of biorecognition events or biocatalytic transformations. Examples are the generation of photocurrents by duplex DNA assemblies bridging CdS NPs to electrodes, and by the formation of photocurrents as a result of biocatalyzed transformations. Semiconductor nanoparticles are also used as labels for the electrochemical detection of DNA or proteins: Semiconductor NPs functionalized with nucleic acids or proteins bind to biorecognition complexes, and the subsequent dissolution of the NPs allows the voltammetric detection of the related ions, and the tracing of the recognition events.     

Ultrasensitive Cu sensing by near-infrared-emitting CdSeTe alloyed quantum dots

The near-infrared (NIR)-emitting CdSeTe alloyed quantum dots (AQdots) that capped with l-cysteine were applied for ultrasensitive Cu²⁺ sensing. The sensing approach was based on the fluorescence of the AQdots selectively quenched in the presence of Cu²⁺. Experimental results showed a low interference response towards other metal ions. The possible quenching mechanism was discussed on the basis of the binding between l-cysteine and the metal ions. In addition, biomolecules have low effect on the fluorescence due to the minimized interferences in NIR region. The response of the NIR optical sensor was linearly proportional to the concentration of Cu²⁺ ranging from 2 × 10⁻⁸ to 2 × 10⁻⁶ mol L⁻¹. Furthermore, it has been successfully applied to the detection of Cu²⁺ in vegetable samples.     

量子点在法庭科学手印显现中的研究进展

随着纳米技术的进步,纳米颗粒正在被逐步应用到法庭科学领域的手印检验之中。近年来,半导体量子点因其良好的荧光特性而备受国内外法庭科学家的推崇,但大多数半导体量子点具有毒性,且会对环境造成污染,这些问题制约了半导体量子点在法庭科学领域中的应用。与传统有机染料和金属内核的半导体量子点相比,碳量子点具有毒性低、污染小、生物相容性优异的特点,现已应用于医学、生物、化学等多个领域。本文综述了半导体量子点在手印显现中的应用,介绍了碳量子点的研究进展,并指出碳量子点显现手印是今后法庭科学领域的重要研究方向。     

柠檬酸盐稳定的水溶性CdSe量子点的合成及表征

以柠檬酸三钠为稳定剂在水溶液中合成了水溶性CdSe量子点,用X射线粉末衍射、透射电镜、紫外-可见吸收光谱和荧光发射光谱对CdSe量子点的结构、形貌及其荧光性质进行了表征.结果表明合成的CdSe量子点为立方闪锌矿结构,呈球形,分散性良好,平均尺寸约为2.6nm,具有窄且对称的荧光发射光谱,半峰宽为45nm.     

InP quantum dots on g-C3N4 nanosheets to promote molecular oxygen activation under visible light

Largely limited by the high dissociation energy of the O—O bond,the photocatalytic molecular oxygen activation is highly challenged,which re strains the application of photocatalytic oxidation technology for atmospheric pollutants removal.Herein,we design and fabricate the InP QDs/g-C3 N4 compounds.The introduction of InP QDs promotes the charge transfer within the interface resulting in the effective separation of photo-generated carriers.Furthermore,InP QDs greatly facilitates the activation o...     

Photovoltammetric behavior and photoelectrochemical determination of p-phenylenediamine on CdS quantum dots and graphene hybrid film

A photoelectroactive film composed of CdS quantum dots and graphene sheets (GS) was coated on F-doped SnO₂ (FTO) conducting glass for studying the electrochemical response of p-phenylenediamine (PPD) under photoirradiation. The result indicated that the cyclic voltammogram of PPD on CdS–GS hybrid film became sigmoidal in shape after exposed under visible light, due to the photoelectrocatalytic reaction. Such a photovoltammetric response was used to rapidly optimize the photoelectrocatalytic activity of hybrid films composed of different ratios of CdS to GS toward PPD. The influences of scan rate and pH on the photovoltammetric behavior of PPD on CdS–GS film revealed that although the controlled step for electrochemical process was not changed under photoirradiation, more electrons than protons might participate the photoelectrocatalytic process. Furthermore, the photoelectroactive CdS–GS hybrid film was explored for PPD determination based on the photocurrent response of film toward PPD. Under optimal conditions, the photocurrent signal on CdS–GS film was linearly proportional to the concentration of PPD ranging from 1.0 × 10⁻⁷ to 3.0 × 10⁻⁶ mol L⁻¹, with a detection limit (3S/N) of 4.3 × 10⁻⁸ mol L⁻¹. Our work based on CdS–GS hybrid film not only demonstrated a new facile photovoltammetric way to study the photoinduced electron transfer process of PPD, but also developed a sensitive photoelectrochemical strategy for PPD determination.     

Carbon nanospheres enhanced electrochemiluminescence of CdS quantum dots for biosensing of hypoxanthine

This work developed a novel method to greatly enhance the electrochemiluminescence (ECL) of CdS quantum dots (QDs). The ECL amplification was achieved by the assembly of QDs on poly (diallyldimethylammonium chloride)-functionalized carbon nanospheres (PFCNSs), and successfully employed for sensitive ECL biosensing of oxidase substrates. The carbon nanospheres were prepared by a “green” method, and the high loading of QDs on carbon nanospheres led to a 4-times increased ECL intensity with dissolved O₂ as the coreactant. Using xanthine oxidase (XOD) as a model, an ECL biosensor was fabricated by immobilizing the enzyme on the mixing membrane of PFCNSs and QDs. The ECL biosensor showed a fast response to hypoxanthine with a linear concentration range from 2.5 × 10⁻⁸ to 1.4 × 10⁻⁵ M. The limit of detection was 5 nM at a signal-to-noise ratio of 3. The assay results of hypoxanthine in fish samples were in a good agreement with the reference values by amperometric technique. This facile approach to prepare the PFCNSs/QDs system for ECL biosensing could be of promising application in bioanalysis and electronic device.     

基于PbS量子点和金纳米颗粒的可卡因适体传感器的研究

本文采用水热法合成了硫化铅量子点,将其与壳聚糖混合后修饰在玻碳电极上,利用PbS与巯基之间的强烈的键和作用,直接将所合成的带巯基的与可卡因适体互补的DNA固定到电极上,将金纳米颗粒标记在可卡因适体作为示踪物检测可卡因,研制了一种新型的用于快速测定可卡因的适体传感器.该适体传感器与不同浓度的可卡因培育时,可卡因适体与可卡...     

Ultrasensitive cysteine sensing using citrate-capped CdS quantum dots

The importance of cysteine (Cys) in biological systems has stimulated a great deal of efforts in the development of analytical methods for the determination of this amino acid. In this work, a novel fluorescent probe for Cys based on citrate (Cit)-capped CdS quantum dots (QDs) is reported. The Cit-capped CdS QDs fluorescent probe offers good sensitivity and selectivity for detecting Cys. A good linear relationship was obtained from 1.0 × 10⁻⁸ mol L⁻¹ to 5.0 × 10⁻⁵ mol L⁻¹ for Cys. The detection limit was calculated as 5.4 × 10⁻⁹ mol L⁻¹. The proposed method was applied to detect Cys in human urine samples, which showed satisfactory results. This assay is based on both the lability of Cit and the strong affinity of thiols to the surface of CdS QDs. The addition of Cys improved the passivation of the surface traps of CdS QDs and enhanced the fluorescence intensity.     

Optical applications of quantum dots in biological system

This review presents a simple introduction on the unique properties and general synthesis of quantum dots (QDs) in which we lay emphasis on the optical applications in the biological system. The detection of biological molecules such as DNA, protein and enzyme, the cell-based analysis and in vivo animal imaging are mainly discussed.     

Interdependence of ICD rates in paired quantum dots on geometry

Using state‐of‐the‐art antisymmetrized multiconfiguration time‐dependent Hartree (MCTDH) electron dynamics calculations we study the interdependence of the intermolecular Coulombic decay (ICD) process on the geometric parameters of a doubly‐charged paired quantum dot (PQD) model system in the framework of the effective mass approximation (EMA). We find that ICD displays a maximum rate for a certain geometry of the electron‐emitting quantum dot, which is simultaneously dependent on both the distance between the quantum dots as well as the photon‐absorbing quantum dot's geometry. The rate maximum is shown to be caused by the competing effects of polarization of electron density and Coulomb repulsion. The ICD rate‐maximized PQD geometry in GaAs QDs yields a decay time of 102.39 ps. It is given by two vertically‐aligned cylindrical QDs with radii of 14.42 nm separated by 86.62 nm. The photon absorbing QD then has a height of 46.59 nm and the electron emitting QD a height of 16.33 nm. © 2017 Wiley Periodicals, Inc.