牛血清白蛋白在超薄纳米二氧化钛膜表面的印迹与吸附

基于溶胶凝胶分子印迹方法,以溶胶二氧化钛TiO2为基质印迹了牛血清白蛋白分子。用1%的NaOH溶液可有效地除去纳米TiO2印迹膜中的模板分子。采用石英晶体微天平现场技术,研究了牛血清白蛋白在超薄纳米TiO2膜表面的吸附行为。研究表明,牛血清白蛋白在印迹膜和非印迹膜上的吸附量都随溶液浓度增加而增大,印迹膜具有吸附的特异性和可再生性,其吸附量是非印迹膜的3~5倍;在非印迹膜上的吸附符合Langmuir吸附模型,而在印迹膜上的吸附符合allosteric吸附模型;牛血清白蛋白在非印迹膜上的吸附量先随pH升高而增大,当pH为5左右时达到最大值,随后吸附量又随pH的增大而减小;而在印迹膜上其吸附量仅随pH增大而增大。     

蛋白质分子印迹聚合物研究

分子识别现象在生命过程中扮演着极其重要的角色,对此进行研究和探索是化学和生物学领域的核心课题,制备具有分子识别能力的人工受体是对该领域科学工作者的一个持久挑战．为此,相关研究人员进行了多方努力,创造性地发展了许多崭新的方法和手段,其中的分子印迹聚合物制备技术就是这些方法和手段中的一种.     

Magnetic molecularly imprinted polymers synthesized by surface‐initiated reversible addition‐fragmentation chain transfer polymerization for the enrichment and determination of synthetic estrogens in aqueous solution

Magnetic molecularly imprinted polymers have attracted significant interest because of their multifunctionality of selective recognition of target molecules and rapid magnetic response. In this contribution, magnetic molecularly imprinted polymers were synthesized via surface‐initiated reversible addition addition‐fragmentation chain transfer polymerization using diethylstilbestrol as the template for the enrichment of synthetic estrogens. The uniform imprinted surface layer and the magnetic property of the magnetic molecularly imprinted polymers favored a fast binding kinetics and rapid analysis of target molecules. The static and selective binding experiments demonstrated a desirable adsorption capacity and good selectivity of the magnetic molecularly imprinted polymers in comparison to magnetic non‐molecularly imprinted polymers. Accordingly, a corresponding analytical method was developed in which magnetic molecularly imprinted polymers were employed as magnetic solid‐phase extraction materials for the concentration and determination of four synthetic estrogens (diethylstilbestrol, hexestrol, dienestrol, and bisphenol A) in fish pond water. The recoveries of these synthetic estrogens in spiked fish pond water samples ranged from 61.2 to 99.1% with a relative standard deviation of lower than 6.3%. This study provides a versatile approach to prepare well‐defined magnetic molecularly imprinted polymers sorbents for the analysis of synthetic estrogens in water solution.     

Bovine serum albumin surface imprinted polymer fabricated by surface grafting copolymerization on zinc oxide rods and its application for protein recognition

A novel bovine serum albumin (BSA) surface imprinted polymer based on ZnO rods was synthesized by surface grafting copolymerization. It exhibited an excellent recognition performance to bovine serum albumin. The adsorption capacity and imprinting factor of bovine serum albumin could reach 89.27 mg/g and 2.35, respectively. Furthermore, the fluorescence property of ZnO was used for tracing the process of protein imprinting and it implied the excellent optical sensing property of this material. More importantly, the hypothesis that the surface charge of carrier could affect the imprinting process was confirmed. That is, ZnO with positive surface charge could not only improve the recognition specificity of binding sites to template proteins (pI < 7), but also deteriorate the bindings between sites and non‐template proteins (pI > 7). It was also important that the reusability of ZnO@BSA molecularly imprinted polymers was satisfactory. This implied that the poor mechanical/chemical stability of traditional zinc oxide sensors could be solved by the introduction of surface grafting copolymerization. These results revealed that the ZnO@BSA molecularly imprinted polymers are a promising optical/electrochemical sensor element.     

修饰硅胶表面印迹牛血红蛋白及其识别性能的研究

本文选用马来酸酐修饰后的硅胶作为载体,丙烯酰胺为功能单体,N,N’-亚甲基双丙烯酰胺为交联剂,牛血红蛋白为模板分子,采用氧化还原悬浮聚合法,合成了具有选择性识别的牛血红蛋白分子印迹聚合物。并用红外光谱(IR)、扫描电子显微镜(SEM)对聚合物进行了表征,结果表明载体表面成功接枝了分子印迹聚合物薄层。同时,选择性吸附实验表明分子印迹聚合物的具有良好的识别性能,能成功的实现水溶液中牛血红蛋白的富集。     

Design of EGDMA‐Crosslinked Theophylline Imprinted Polymer with High Specificity and Selectivity

An attempt has been made to design theophylline selective polymers with maximum selectivity and specificity, and to relate the rebinding capacity of the polymers with the degree of crosslinking, as well as with the template‐monomer ratio. The theophylline imprinted and non‐imprinted polymers based on methacrylic acid as the functional monomer and ethylene glycol dimethacrylate (EGDMA) as crosslinking agent (35–80 mol%) were prepared. The developed imprinted polymers were characterized by FT‐IR, ¹H and ¹³C‐NMR spectra. Equilibrium binding of theophylline by the imprinted and non‐imprinted polymers were investigated and optimized the conditions. Imprinted polymers showed specific binding of the template theophylline. Selectivity of the imprinted polymers was investigated towards caffeine and nicotine. Imprinted polymers showed specific and selective binding of theophylline, which varied with the degree of EGDMA crosslinking. Equilibrium rebinding experiments proved that imprinted polymer with moderate (70%) crosslinking with 1∶2 template‐functional monomer ratio is ideal with maximum specificity and selectivity.     

光接枝表面修饰法制备牛血红蛋白的分子印迹微球

聚苯乙烯球载体表面经引发转移终止剂修饰后, 采用光接枝表面印迹方法制备了以牛血红蛋白(BHb)为模板分子、丙烯酰胺为功能单体和N,N′-亚甲基双丙烯酰胺为交联剂的分子印迹聚合物微球(MIP). 进一步采用红外光谱(IR)、扫描电子显微镜(SEM)和元素分析对聚合物微球进行了表征, 证实了载体表面成功地接枝了分子印迹层, 并研究了其吸附性能和分子识别选择性能. 结果表明, 采用光接枝表面修饰法制备的分子印迹微球对模板分子有着很好的吸附容量和识别选择性.     

New configurations and applications of molecularly imprinted polymers

Molecularly imprinted polymers (MIPs) are applicable in a variety of different configurations. For example, bulk polymers imprinted with beta-lactam antibiotics are presented to be used as stationary phases for the chromatographic separation of beta-lactam antibiotics with both aqueous and organic mobile phases. However, in some analytical applications, monosized spherical beads are preferred over the currently used ground bulk polymers. A precipitation polymerization technique allows preparation of monosized spherical imprinted beads with diameters down to 200 nm having excellent recognition properties for different target molecules. Nevertheless, with current imprinting protocols a substantial amount of template has to be used to prepare the polymer. This can be problematic if the template is poorly soluble, expensive or difficult to obtain. It is shown that for analytical applications, the functional monomer:template ratio can be drastically increased without jeopardizing the polymer's recognition properties. Furthermore, a substantial reduction of the degree of crosslinking is demonstrated, resulting in much more flexible polymers that are useful for example the preparation of thin imprinted films and membranes for sensors. Apart from analysis, MIPs also are applicable in chemical or enzymatic synthesis. For example, MIPs using the product of an enzyme reaction as template are utilized for assisting the synthetic reaction by continuously removing the product from the bulk solution by complexation. This results in an equilibrium shift towards product formation.     

1-乙烯基-3-甲基咪唑离子液体/分子印迹材料用于牛血红蛋白的识别

分子印迹聚合物是一类对目标分子具备特异性辨别能力的高分子吸附剂材料.运用本体聚合法,以牛血红蛋白(BHb)为模板分子,丙烯酰胺(AAM)和碘化1-乙烯基-3-甲基咪唑离子液体在交联剂、引发剂和加速剂的作用下进行聚合,制备的分子印迹材料对牛血红蛋白(BHb)具备特异性识别功能.同时,对识别条件进行了优化和讨论.     

Signaling molecularly imprinted polymers: molecular recognition-based sensing materials

Molecular imprinting is a template polymerization technique that can easily provide synthetic polymers capable of molecular recognition for given target molecules. In addition to their highly specific recognition ability, we are attempting to introduce signaling functions to molecularly imprinted polymers, enabling them to respond according to specific binding events. Some of our work regarding such signaling molecularly imprinted polymers is presented here, including molecularly imprinted polymers that induce spectral shifts of target compounds because of binding. Such compounds include hydrogen-bonding-based fluorescent imprinted polymers and metalloporphyrin-based signaling molecularly imprinted polymers.     

A sol-gel derived pH-responsive bovine serum albumin molecularly imprinted poly(ionic liquids) on the surface of multiwall carbon nanotubes

A pH-responsive surface molecularly imprinted poly(ionic liquids) (MIPILs) was prepared on the surface of multiwall carbon nanotubes (MWCNTs) by a sol-gel technique. The material was synthesized using a 3-aminopropyl triethoxysilane modified multiwall carbon nanotube (MWCNT-APTES) as the substrate, bovine serum albumin (BSA) as the template molecule, an alkoxy-functionalized IL 1-(3-trimethoxysilyl propyl)-3-methyl imidazolium chloride ([TMSPMIM]Cl) as both the functional monomer and the sol-gel catalyst, and tetraethoxysilane (TEOS) as the crosslinking agent. The molecular interaction between BSA and [TMSPMIM]Cl was quantitatively evaluated by UV–vis spectroscopy prior to polymerization so as to identify an optimal template/monomer ratio and the most suitable pH value for the preparation of the MWCNTs@BSA-MIPILs. This strategy was found to be effective to overcome the problems of trial-and-error protocol in molecular imprinting. The optimum synthesis conditions were as follows: template/monomer ratio 7:20, crosslinking agent content 2.0–2.5 mL, temperature 4 °C and pH 8.9 Tris–HCl buffer. The influence of incubation pH on adsorption was also studied. The result showed that the imprinting effect and selectivity improved significantly with increasing incubation pH from 7.7 to 9.9. This is mainly because the non-specific binding from electrostatic and hydrogen bonding interactions decreased greatly with the increase of pH value, which made the specific binding affinity from shape selectivity strengthened instead. The polymers synthesized under the optimal conditions were then characterized by BET surface area measurement, FTIR, thermogravimetric analysis (TGA) and scanning electron microscopy (SEM). The adsorption capacity, imprinting effect, selective recognition and reusability were also evaluated. The as-prepared MWCNTs@BSA-MIPILs were also found to have a number of advantages including high surface area (134.2 m² g⁻¹), high adsorption capacity (55.52 mg g⁻¹), excellent imprinting effect (imprinting factor of up to 5.84), strong selectivity (selectivity factor of 2.61 and 5.63 for human serum albumin and bovine hemoglobin, respectively), and good reusability.     

Synthesis of magnetic dual‐template molecularly imprinted nanoparticles for the specific removal of two high‐abundance proteins simultaneously in blood plasma

Novel core–shell dual‐template molecularly imprinted superparamagnetic nanoparticles were synthesized using bovine hemoglobin and bovine serum albumin as the templates for the efficient depletion of these two high‐abundance proteins from blood plasma for the first time. The preparation process combined surface imprinting technique and a two‐step immobilized template strategy. The obtained polymers were fully characterized by transmission electron microscopy, X‐ray diffraction, Fourier transform infrared spectroscopy, and vibrating sample magnetometry. The results showed that the as‐synthesized nanomaterials possessed homogeneous and thin imprinted shells with a thickness of about 5 nm, stable crystalline phase, and superparamagnetism. The binding performance of the imprinted polymers was investigated through a series of adsorption experiments, which indicated that the products had satisfactory recognition ability for bovine hemoglobin and bovine serum albumin. The resultant nanoparticles were also successfully applied to simultaneously selective removal of two proteins from a real bovine blood sample.     

Synthesis of stationary phases that provide group recognition for polychlorinated biphenyls by porogenic fragment template imprinting

Molecular recognition based on imprinted polymers results from the polymerization of functional monomers and cross‐linkers in the presence of a target analyte (i.e. template), with subsequent removal of the template to create synthetic binding sites. However, complete removal of the template is difficult to achieve, thereby leading to template leaching, which adversely affects real‐world analytical applications. To overcome this challenge, the present study utilizes porogenic fragment template imprinting techniques to provide an alternative synthetic strategy to generate molecularly imprinted polymers with molecular recognition toward polychlorinated biphenyls. Thereafter, thus‐generated imprinted polymers have been applied as stationary phases in molecularly imprinted solid‐phase extraction for preconcentrating six “indicator polychlorinated biphenyls” in both organic and aqueous media. Recoveries of up to 98.9% (imprinted polymers) versus 73.0% (conventional C₁₈) in an organic phase, and up to 97.4% (imprinted polymers) versus 89.4% (C₁₈) in an aqueous phase have been achieved corroborating the utility of this advanced sorbent material. Finally, porogenic fragment template imprinting strategies have yielded molecularly imprinted polymers that are useful for the quantitative determination of polychlorinated biphenyls in environmental matrices, which provides a low‐cost strategy for tailoring stationary phases that avoid template leaching in applications in solid‐phase extraction as well as liquid chromatography.     

Organic–inorganic hybrid silica as supporting matrices for selective recognition of bovine hemoglobin via covalent immobilization

The synthesis of poly‐aminophenylboronic acid (APBA) imprinted hybrid silica‐based polymers for selective recognition of bovine hemoglobin (BHb) was described, where the mesoporous hybrid silica supporting matrices were prepared by a mild sol–gel process with tetraethoxysilane and 3‐aminopropyltriethoxysilane as two precursors. Covalent immobilization of BHb was adopted in order to create homogeneous recognition sites. After removal of the template, the resulting imprinted polymers showed high binding affinity toward BHb and the imprinting factor (α) reached 2.12. The specificity of the BHb recognition was evaluated with competitive experiments, indicating the imprinted polymers have a higher selectivity for the template BHb. The easy preparation protocol and good protein recognition properties made the approach an attractive solution to depletion of high‐abundance protein from bovine blood.     

反乌头酸分子印迹聚合物微球的制备及其分子识别功能

以乙腈为分散剂,采用沉淀聚合法合成了反乌头酸分子印迹聚合物微球。研究了合成反应条件对聚合物形貌的影响,发现聚合前主客体氢键络合物和功能单体氢键低聚体是控制微球形成及其粒径大小的关键因素。通过振荡吸附法对聚合物的结合特性进行了评价,发现印迹聚合物微球对模板分子的识别选择性优于块状印迹聚合物和非印迹聚合物。     

BSA‐imprinted synthetic receptor for reversible template recognition

A novel approach to the manufacturing of protein‐responsive imprints on a home‐made chitosan substrate was established together with m‐aminophenylboronic acid (APBA) as a functional monomer. The produced polymers were characterized using both (1) equilibrium adsorption assays and (2) high performance liquid chromatography analysis. Results confirmed that the synthesized BSA‐MIP (molecularly imprinted polymer) has a high affinity towards its template compared to the determined control proteins. The produced BSA‐MIP featured largely in its good adsorption reversibility, especially in competitive binding assays, which is of great biological significance in separations. Non‐specific binding was reduced to almost zero in a BSA/BHb competitive binding event. An excellent HPLC profile of template recognition was found for BSA‐MIP, even under harsh mobile phase conditions. In the present work, the adopted trapped‐template‐release method permits recovery of bound BSA [1]. The strategy of making an artificial protein‐receptor with high adsorption affinity and reversibility is promising in on‐line isolation of target protein from complicated biological environments.     

牛血清白蛋白和溶菌酶为双模板蛋白质的表面印迹聚合物的制备及吸附性能

采用反应条件温和的原子转移自由基聚合法(ATRP),以N-异丙基丙烯酰胺(NIPAAm)和丙烯酰胺(AAm)为功能单体,以N-(3-二甲氨基丙基)甲基丙烯酰胺(DMAPMA)为辅助功能单体,制备了以牛血清白蛋白(BSA)和溶菌酶(Lyz)为双模板蛋白质的表面印迹聚合物(Bi-MIP)。对印迹过程中辅助功能单体的量进行了考察,结果表明,在单一蛋白质溶液和混合蛋白质溶液中,当DMAPMA为20 μL时,制备的Bi-MIP对模板蛋白质BSA和Lyz有较好的吸附容量与选择性。通过静态吸附实验考察了Bi-MIP的吸附性能,并结合Langmuir吸附模型得到聚合物对模板蛋白质BSA和Lyz的最大吸附容量分别为10.2 mg/g和19.2 mg/g。且该印迹聚合物在实际样品中对模板蛋白质也表现出较强的吸附能力和较高的选择性。该方法将为复杂生物样品中同时对双/多种目标蛋白质的识别提供一种新的途径。     

Preparation of bovine hemoglobin-imprinted polymer beads via the photografting surface-modified method

Molecularly imprinted polymers (MIPs), based on photografting surface-modified polystyrene beads as matrices, were prepared with acrylamide as the functional monomer, bovine hemoglobin as the template molecule and N, N′-methylene bisacrylamide as the crosslinker in a phosphate buffer. The results of IR, scanning electron microscope (SEM) and elemental analyses demonstrated the formation of a grafting polymer layer on the polystyrene-bead surface. Subsequent removal of the template left behind cavities on the surface of the polymer matrix with a shape and an arrangement of functional groups having complementary binding sites with the original template molecule. The adsorption studies showed that the imprinted polymers have a good adsorption capacity and specific recognition for bovine hemoglobin as the template molecule. Our results demonstrated that the polymer prepared via the photografting surface-modified method exhibited better selectivity for the template. Attempts to employ the new method in molecular imprinting techniques may introduce new applications for MIPs and facilitate probable protein separation and purification. __________ Translated from Chemical Journal of Chinese Universities, 2008, 29(1): 64–70     

Design of molecular imprinted polymers compatible with aqueous environment

The main problem of poor water compatibility of molecularly imprinted polymers (MIPs) was addressed in examples describing design of synthetic receptors with high affinity for drugs of abuse. An extensive potentiometric titration of 10 popular functional monomers and corresponding imprinted and Blank polymers was conducted in order to evaluate the subtleties of functional groups ionisation under aqueous conditions. It was found that polymers prepared using 2-trifluoromethacrylic acid (TFMAA) in combination with toluene as porogen possess superior properties which make them suitable for effective template recognition in water. The potential impact of phase separation during polymerisation on formation of high quality imprints has been discussed. Three drugs of abuse such as cocaine, deoxyephedrine and methadone were used as template models in polymer preparation for the practical validation of obtained results. The polymer testing showed that synthesized molecularly imprinted polymers have high affinity and selectivity for corresponding templates in aqueous environment, with imprinting factors of 2.6 for cocaine and 1.4 for methadone and deoxyephedrine. Corresponding Blank polymers were unable to differentiate between analytes, suggesting that imprinting phenomenon was responsible for the recognition properties.     

Molecular imprinting polymerization by Fenton reaction

The aim of this study is the preparation of molecularly imprinted polymers by employing a redox pair as initiator system. Bulk molecularly imprinted polymers were synthesized by using Fenton reagents as initiator system. Theophylline, methacrylic acid, and ethylene glycol dimethacrylate were employed as model template, functional monomer, and crosslinking agent, respectively. Conventional imprinted polymers were also prepared by using 2,2′-azoisobutyronitrile in order to evaluate the efficiency of the proposed initiator system. Redox molecularly imprinted polymers and conventional molecularly imprinted polymers were characterized by water uptake measurement, while the imprinting effect of synthesized polymers were evaluated by performing binding experiments in organic (acetonitrile) and in water (buffered water solution at pH = 7.4) media.