Cold fiber solid-phase microextraction device based on thermoelectric cooling of metal fiber

A new cold fiber solid-phase microextraction device was designed and constructed based on thermoelectric cooling. A three-stage thermoelectric cooler (TEC) was used for cooling a copper rod coated with a poly(dimethylsiloxane) (PDMS) hollow fiber, which served as the solid-phase microextraction (SPME) fiber. The copper rod was mounted on a commercial SPME plunger and exposed to the cold surface of the TEC, which was enclosed in a small aluminum box. A heat sink and a fan were used to dissipate the generated heat at the hot side of the TEC. By applying an appropriate dc voltage to the TEC, the upper part of the copper rod, which was in contact to the cold side of the TEC, was cooled and the hollow fiber reached a lower temperature through heat transfer. A thermocouple was embedded in the cold side of the TEC for indirect measurement of the fiber temperature. The device was applied in quantitative analysis of off-flavors in a rice sample. Hexanal, nonanal, and undecanal were chosen as three off-flavors in rice. They were identified according to their retention times and analyzed by GC-flame ionization detection instrument. Headspace extraction conditions (i.e., temperature and time) were optimized. Standard addition calibration graphs were obtained at the optimized conditions and the concentrations of the three analytes were calculated. The concentration of hexanal was also measured using a conventional solvent extraction method (697+/-143ng/g) which was comparable to that obtained from the cold fiber SPME method (644+/-8). Moreover, the cold fiber SPME resulted in better reproducibility and shorter analysis time. Cold fiber SPME with TEC device can also be used as a portable device for field sampling.     

Sampling volatile organic compounds using a modified solid phase microextraction device

Headspace solid phase microextraction (headspace SPME) has been demonstrated to be an excellent solvent-free sampling method. One of the major factors contributing to the success of headspace SPME is the concentrating effect of the fiber coating toward organic compounds. The affinity of the fiber coating toward very volatile analytes, such as chloromethane, may, however, not be large enough for detection at the parts per trillion concentration level. Static headspace analysis, on the other hand, is very effective for these very volatile compounds. As analyte volatility decreases, the sensitivity of static headspace analysis drops. The complementary nature of these two sampling methods can be exploited by combining the SPME device with a gastight syringe. The sensitivity of the new sampling device is better than that of SPME for very volatile compounds or that of static headspace analysis for less volatile compounds. This new method can sample a wide range of compounds from chloromethane (b.p. −24°C) to bromoform (b.p. 149°C) with estimated limits of detection at the low parts per trillion level.     

固相微萃取纤维的制备及其在污染物残留检测中的应用研究进展

作为一种简便高效的样品前处理技术,固相微萃取(SPME)在食品、环境水样和生物体液等复杂基质残留污染物检测中得到广泛应用。为进一步提高净化效率和降低使用成本等,大量文献报道了涂层纤维的制备条件和吸附剂的选择。本文综述了SPME涂层纤维的制备方法、材料及应用。描述了不同材料对于不同分析物的吸附原理,特别讨论了难挥发与热不稳定性分析物的SPME分析步骤,总结了SPME存在的问题及今后发展趋势,为后续SPME技术的开发提供理论依据。     

The determination of volatile organic compounds in soils using solid phase microextraction with gas chromatography-mass spectrometry

Solid phase microextraction (SPME) was applied in the development of a protocol for the analysis of a number of target organic compounds in landfill site samples. The selected analytes, including aromatic hydrocarbons, chlorinated hydrocarbous, and unsaturated compounds, were absorbed directly from a headspace sample above a soil layer onto a fused silica fiber. Following exposure, the fiber was thermally desorbed in the injection port of the gas chromatograph and eluted compounds were detected using a mass selective detector. The stability and sensitivity of the extraction technique were examined at five temperatures (22–60°C) using a 100μm polydimethylsiloxane fiber. Calibrations, using soil samples spiked with selected solvents (0.5–30 μg/g), were linear; trichloroethene (r² = 0.992) and benzene (r² = 0.998). SPME was applied to the examination of a municipal landfill where 8 sites were sampled, at three depths, resulting in the detection of xylene (maximum 2.8 μg/g) and a number of other non-target organic contaminants.     

Determination of organophosphorus pesticides in ecological textiles by solid-phase microextraction with a siloxane-modified polyurethane acrylic resin fiber

A novel solid-phase microextraction (SPME) fiber coating was prepared with siloxane-modified polyurethane acrylic resin by photo-cured technology. The ratio of two monomers was investigated to obtain good microphase separation structure and better extraction performance. The self-made fiber was then applied to organophosphorus pesticides (OPPs) analysis and several factors, such as extraction/desorption time, extraction temperature, salinity, and pH, were studied. The optimized conditions were: 15 min extraction at 25 °C, 5% Na₂SO₄ content, pH 7.0 and 4 min desorption in GC inlet. The self-made fiber coating exhibited better extraction efficiency for OPPs, compared with three commercial fiber coatings. Under the optimized conditions, the detection limits of 11 OPPs were from 0.03 μg L⁻¹ to 0.5 μg L⁻¹. Good recoveries and repeatabilities were obtained when the method was used to determine OPPs in ecological textile.     

Multiresidue method using SPME for the determination of various pesticides with different volatility in confined atmospheres

An analytical method is described for assessing the vapour concentration of 11 pesticides (bioallethrin, chlorpyriphos methyl, folpet, malathion, procymidone, quintozene, chlorothalonil, fonofos, penconazole and trimethacarb) in confined atmospheres (e.g. a greenhouse after pesticide application). This study is a successful extension of a method previously developed by the authors for dichlorvos to much less volatile pesticides. Sampling was performed by using polydimethylsiloxane–solid phase micro-extraction (PDMS–SPME) fibres immersed in a 250-mL sampling flask through which air samples were dynamically pumped from the analysed atmosphere. After a 40-min sampling duration, samples were analysed by GC/MS.Calibration was performed from a vapour-saturated air sample. The linearity of the observed signal versus pesticide concentration in the vapour phase was proved from spiked liquid samples whose headspace concentrations were measured by using the proposed method. This procedure gave calibration curves with regression coefficients (R²) greater than 0.98, and the repeatability of these measurements was found with RSDs of 1.9–7.6%. As a field application test, this analysis procedure was used for the determination of gaseous procymidone concentrations as a function of time in the atmosphere of an experimental 8-m² and 20-m³ greenhouse. The pesticide was sprayed according to real cultivation conditions, and measurements were made for 80 h after application (8 measurements). The observed concentrations found ranged from 200 to 500 µg m^–3, thus indicating the level of contamination of the air breathed by people in such working conditions.Abbreviations GC/MS gas chromatography/mass spectrometry - SIM selective ion monitoring - FC43 perfluorotributylamine - RSD relative standard deviation - LOD limit of detection - LOQ limit of quantification     

Determining the permeability of organic solvents through PVC pipes using a direct SPME model

The permeability of aromatic hydrocarbons, i.e. BTEX and styrene, through PVC pipes was investigated using a 6-cm pipe-bottle model with direct solid-phase microextraction (SPME) sampling. It was found that an aromatic hydrocarbon with a large molecular size or low polarity may be less permeable through PVC pipes. In addition, the diffusion coefficients of BTEX and styrene in PVC pipes ranged from 4.87 to 7.64 × 10⁻⁸ cm²/s. According to the simulation results of a one-dimensional diffusion model, it is speculated that diffusion transport of benzene and toluene in PVC pipes may have non-Fickian behavior. The advantage of using the innovated test model is that SPME provides a nondestructive analytical means to monitor the concentrations of organic compounds in pipe-water. Therefore, the pipe-bottle model developed herein has potential applications in determining the resistance of polymeric pipes to permeation by solvents in the aqueous solution.     

Recent developments in solid-phase microextraction for on-site sampling and sample preparation

On-site sampling and sample preparation favor portable, solventless or even solvent-free techniques. Solid-phase microextraction (SPME) has these advantages. This review focuses on developments between 2007 and early 2011 in microextraction techniques for on-site sampling and sample preparation, including fiber SPME, stir-bar sorptive extraction (SBSE), thin-film microextraction (TFME) and different types of in-needle SPME. The major trends in on-site applications of SPME appear to be fiber and thin-film SPME, microextraction by packed sorbent (MEPS) and the sorbent-packed needle-trap device (NTD). We discuss and compare several aspects of these types of SPME in on-site applications. We also describe sorbent phases for SPME that benefit on-site applications. Finally, we provide a perspective on SPME-based techniques for on-site applications.     

Improvement of solid phase microextraction fiber assembly and interface for liquid chromatography

Modifications were made on commercial SPME fiber assembly and SPME–LC interface to improve the applicability of SPME for LC. Polyacrylonitrile (PAN)/C18 bonded fuse silica was used as the fiber coating for LC applications because the fiber coating was not swollen in common LC solvents at room temperature. The inner tubing of SPME fiber assembly was replaced with a 457 μm outside diameter (o.d.) solid nitinol rod. And the coated fiber (o.d. 290 μm) was installed onto the nitinol rod. The inner diameter (i.d.) of the through hole of the ferrule in the SPME–LC interface was enlarged to 508 μm to accommodate the nitinol rod. The much larger inner rod protected the fiber coating from being stripped when the fiber was withdrawn from the SPME–LC interface. The system was evaluated in term of pressure test, desorption optimization, peak shape, carryovers, linear range, precision, and limit of detection (LOD) with polycyclic aromatic hydrocarbons (PAHs) as the test analytes. The results demonstrated that the improved system was robust and reliable. It overcame the drawbacks, such as leak of solvents and damage of fiber coatings, associated with current SPME fibers and SPME–LC interface. Another sealing mechanism was proposed by sealing the nitinol rod with a specially designed poly(ether ether ketone) (PEEK) fitting. The device was fabricated and tested for manual use.     

固相微萃取/气相色谱/质谱联用测定水中的2,4-二硝基苯酚

研究了水中痕量2,4-二硝基苯酚的固相微萃取（SPME）方法,得到了2,4-二硝基苯酚的SPME最佳萃取条件：水溶液调pH2,并用NaCl他和,在室温下直接萃取30min,气相色谱／质谱分析时,纤维探针在270℃下脱附3min。所建立的方法适于快速、方便地测定水中2,4-二硝基苯酚,不需浓缩和预处理。     

Methodical evaluation and improvement of matrix compatible PDMS-overcoated coating for direct immersion solid phase microextraction gas chromatography (DI-SPME-GC)-based applications

The main quest for the implementation of direct SPME to complex matrices has been the development of matrix compatible coatings that provide sufficient sensitivity towards the target analytes. In this context, we present here a thorough evaluation of PDMS-overcoated fibers suitable for simultaneous extraction of different polarities analytes, while maintaining adequate matrix compatibility. For this, eleven analytes were selected, from various application classes (pesticides, industrial chemicals and pharmaceuticals) and with a wide range of log P values (ranging from 1.43 to 6). The model matrix chosen was commercial Concord grape juice, which is rich in pigments such as anthocyanins, and contains approximately 20% of sugar (w/w). Two types of PDMS, as well as other intrinsic factors associated with the PDMS-overcoated fiber fabrication are studied. The evaluation showed that the PDMS-overcoated fibers considerably slowed down the coating fouling process during direct immersion in complex matrices of high sugar content. Longevity differences could be seen between the two types of PDMS tested, with a proprietary Sylgard^® giving superior performance because of lesser amount of reactive groups and enhanced hydrophobicity. Conversely, the thickness of the outer layer did not seem to have a significant effect on the fiber lifetime. We also demonstrate that the uniformity of the overcoated PDMS layer is paramount to the achievement of reliable data and extended fiber lifetime. Employing the optimum overcoated fiber, limits of detection (LOD) in the range of 0.2–1.3 ng/g could be achieved. Additional improvement is attainable by introducing washing of the coatings after desorption, so that any carbon build-up (fouling) left on the coating surface after thermal desorption can be removed.     

Potential of solid phase microextraction and gas chromatography for quarantine-required detection of wood packaging in shipping containers

Solid phase microextraction (SPME) coupled with gas chromatography (GC) was used to detect terpene hydrocarbons inside shipping containers entering New Zealand. The utility of this system for the rapid detection of undeclared wood packaging for quarantine purposes was demonstrated. A portable dynamic air-sampling device was built to house a SPME fibre and allow the air from shipping containers to be sampled. The effects of sample flow rate and sampling time were investigated and sampling conditions of 100 mL/min for 30 s were chosen to keep sampling within the linear range. A CV of less than 15% (n = 12) was obtained for all the compounds analysed under these conditions. To obtain an estimate for the limit of detection (LOD) for the terpene hydrocarbons of interest, small quantities of lime oil were placed in an empty shipping container and the air inside was analysed. LOD (S/N = 3) was estimated to be in the order of 50-100 ng/L of air using GC with flame ionisation detection (GC-FID). Finally, the device was tested in fully laden containers and was shown to be effective for trapping terpene hydrocarbons indicative of wood packaging.     

固相微萃取-气相色谱/质谱测定植物叶片中的挥发性物质

采用固相微萃取（SPME)方法吸附植物叶片中的挥发性物质,然后采用气相色谱/质谱法（GC/MS）分析了挥发性物 质的成分。在45 ℃水浴温度下,采用Polyacrylate(85 μm)固相微萃取头,在广口瓶中植物叶片的上方顶空吸附60 min,然后进行GC/MS分析。结果表明,植物叶片中的挥发性物质得到了很好的分离,受山楂叶螨(Tetraychus vienneis) 危害严重的植物的完好叶片中的挥发性物质均含有顺-3-己烯-1-醇乙酸酯、顺-3-己烯-1-醇丁酸酯和α-法呢烯,且含量 较大。初步确定这些物质是对山楂叶螨具有引诱作用的主要物质,从而为利用天然生物活性物质防治山楂叶螨提供了理论 依据。     

Fiber introduction mass spectrometry: determination of pesticides in herbal infusions using a novel sol-gel PDMS/PVA fiber for solid-phase microextraction

An application of the direct coupling of solid-phase microextraction (SPME) with mass spectrometry (MS), a technique known as fiber introduction mass spectrometry (FIMS), is described to determine organochlorine (OCP) and organophosphorus (OPP) pesticides in herbal infusions of Passiflora L. A new fiber coated with a composite of poly(dimethylsiloxane) and poly(vinyl alcohol) (PDMS/PVA) was used. Sensitive, selective, simple and simultaneous quantification of several OCP and OPP was achieved by monitoring diagnostic fragment ions of m/z 266 (chlorothalonil), m/z 195 (alpha-endosulfan), m/z 278 (fenthion), m/z 263 (methyl parathion) and m/z 173 (malathion). Simple headspace SPME extraction (25 min) and fast FIMS detection (less than 40 s) of OCP and OPP from a highly complex herbal matrix provided good linearity with correlation coefficients of 0.991-0.999 for concentrations ranging from 10 to 140 ng ml(-1) of each compound. Good accuracy (80 to 110%), precision (0.6-14.9%) and low limits of detection (0.3-3.9 ng ml(-1)) were also obtained. Even after 400 desorption cycles inside the ionization source of the mass spectrometer, no visible degradation of the novel PDMS/PVA fiber was detected, confirming its suitability for FIMS. Fast (ca 20 s) pesticide desorption occurs for the PDMS/PVA fiber owing to the small thickness of the film and its reduced water sorption.     

Environmental and bioanalytical applications of hollow fiber membrane liquid-phase microextraction: a review

In hollow fiber membrane liquid-phase microextraction (LPME), target analytes are extracted from aqueous samples and into a supported liquid membrane (SLM) sustained in the pores in the wall of a small porous hollow fiber, and further into an acceptor phase present inside the lumen of the hollow fiber. The acceptor phase can be organic, providing a two-phase extraction system compatible with capillary gas chromatography, or the acceptor phase can be aqueous resulting in a three-phase system compatible with high-performance liquid chromatography or capillary electrophoresis. Due to high enrichment, efficient sample clean-up, and the low consumption of organic solvent, substantial interest has been devoted to LPME in recent years. This paper reviews important applications of LPME with special focus on bioanalytical and environmental chemistry, and also covers a new possible direction for LPME namely electromembrane extraction, where analytes are extracted through the SLM and into the acceptor phase by the application of electrical potentials.     

镍钛合金纤维/有机硅-聚氨酯固相微萃取头的制备及其在水中7种取代苯化合物检测中的应用

以2,4-甲苯二异氰酸酯、聚酯多元醇、羟基硅油为原料,辛酸亚锡为催化剂,环己酮为溶剂,合成有机硅-聚酯型聚氨酯。将此聚合物涂于经氢氧化钾水热处理的镍钛合金纤维丝表面作为固相微萃取涂层,制得固相微萃取头。利用红外光谱法分析了聚合物结构;热重分析法确定了涂层最高使用温度;扫描电子显微镜观察了萃取头的表面形貌。以顶空萃取-固相微萃取-气相色谱法（HS-SPME-GC）测定了水中甲苯、二甲苯、间二氯苯、邻二氯苯、苯甲酸乙酯、硝基苯、苯甲醇7种取代苯化合物的含量。各被测物的色谱峰面积与其质量浓度呈良好的线性关系,相关系数（R²）为0.9926~0.9998,方法的检出限为0.08~0.24 μg/L。实际样品测定的加标回收率为95.9%~105.4%,相对标准偏差为1.4%~5.0%。通过对实际样品的分析,说明制备的固相微萃取头涂层不易脱落、性质稳定,对于水中取代苯类化合物具有很强的吸附能力。     

Determination of perfluorooctanoic acid and perfluorooctane sulfonate by automated in-tube solid-phase microextraction coupled with liquid chromatography-mass spectrometry

We have developed a simple, rapid, and sensitive method for the determination of perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS) by on-line in-tube solid-phase microextraction (SPME) coupled with liquid chromatography-mass spectrometry (LC-MS). PFOA and PFOS were separated within 10 min by high-performance liquid chromatography using an Inertsil ODS-3 column and 10 mM ammonium acetate/methanol (35/65, v/v) as a mobile phase at a flow rate of 0.25 mL min⁻¹. Electrospray ionization conditions in the negative ion mode were optimized for MS detection of PFOA and PFOS. The optimum in-tube SPME conditions were 20 draw/eject cycles with a sample size of 40 μL using a CP-Pora PLOT amine capillary column as the extraction device. The extracted compounds could be desorbed easily from the capillary by passage of the mobile phase, and no carryover was observed. Using the in-tube SPME LC-MS method, good linearity of the calibration curve (r = 0.9990 for PFOA, r = 0.9982 for PFOS) was obtained in the range of 0.05-5 ng mL⁻¹ each compound. The detection limits (S/N = 3) for PFOA and PFOS were 1.5 and 3.2 pg mL⁻¹, respectively. The method described here showed about 100-fold higher sensitivity than the direct injection method. The within-day and between-day precisions (relative standard deviations) were below 3.7 and 6.0%, respectively. This method was applied successfully to the analysis of PFOA and PFOS in environmental water samples and to the elution test from a Teflon^®-coated frying pan without interference peaks. The recoveries of PFOA and PFOS spiked into river samples were above 81%, and PFOA was detected at pg mL⁻¹ levels in environmental water samples and eluate from the frying pan.     

Fast field analysis of short-chain aliphatic amines in water using solid-phase microextraction and a portable gas chromatograph

A novel method is firstly presented for field and rapid analysis of short-chain aliphatic amines in water as their pentafluorobenzaldehyde (PFBAY) derivative using solid-phase microextraction (SPME) and portable GC. In the proposed method, short-chain aliphatic amines in water rapidly reacted with PFBAY, and then were headspace extracted and concentrated by SPME. The formed amines derivatives were analyzed by portable GC. The SPME parameters of fiber selection, extraction temperature, extraction time, and stirring rate were studied. The method validations including LOD, recovery, precision, and linearity were studied. It was found that the proposed method required the whole analysis time 22 min, and provided low LOD of 1.2-4.6 ng/mL, good recovery of 91-106%, good precision of RSD value 3.5-9.3%, and linear range 20.0-500 ng/mL (r(2) >0.99). The obtained results demonstrated that the SPME-portable GC is a simple, rapid, and efficient method for the field analysis of short-chain aliphatic amines. Finally, the proposed method was further applied to the quantification of ethylamine, propylamine, and butylamine in environmental water.