Simple and sensitive colorimetric detection of cysteine based on ssDNA-stabilized gold nanoparticles

In this paper, we demonstrate a simple and sensitive colorimetric detection of cysteine based on the cysteine-mediated color change of ssDNA-stabilized gold nanoparticles (AuNPs). Cysteine is capable of absorbing onto AuNPs surfaces via the strong interaction between its thiol group and gold. ssDNA molecules which stabilize AuNPs against salt-induced aggregation are removed away by cysteine encapsulation on the AuNPs surfaces, resulting in a characteristic color change of AuNPs from red to blue as soon as salt is added. The ratio of absorptions at 640 to 525 nm (A ₆₄₀/A ₅₂₅) is linear dependent on the cysteine concentration in the range from 0.1 to 5 μM. Furthermore, amino acids other than cysteine cannot mediate the color change under the identical conditions due to the absence of thiol groups, suggesting the selectivity of the proposed method toward cysteine. The employment of complicated protocols and sophisticated processes such as the preparation of modified AuNPs are successfully avoided in design to realize the simple and low-cost cysteine detection; and the high sensitivity and low cost of the method is favorable for practical applications. Figure In the presence of cysteine, cysteine binds to the AuNPs surface via Au-S bond, spontaneously driving ssDNA molecules away from the nanoparticles, which leads to the AuNPs aggregation under the condition of NaCl introduction, and the corresponding color change from red to blue. However, the presence of other amino acids results in no color change due to the absence of thiol groups. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Visual chiral recognition of tryptophan enantiomers using unmodified gold nanoparticles as colorimetric probes

A simple protocol to distinguish enantiomers is extremely intriguing and useful. In this study, we propose a low-cost, facile, sensitive method for visual chiral recognition of enantimers. It is based on the inherent chirality of gold nanoparticles (AuNPs), and the unmodified AuNPs are used as chiral selector for d- and l-Tryptophan (Trp). In the presence of d-Trp, an appreciable red-to-blue color change of AuNPs solution can be observed, whereas no color change is found in the presence of l-Trp. The method can be used to detect d-Trp in the range of 0.2–10 μM, and the limit of detection is 0.1 μM. The chiral assay described in this work is easily readout with the naked eye or using a UV-vis spectrometer. Furthermore, the AuNPs can selectively adsorb d-Trp, and simple centrifugation can allow the precipitation of d-Trp with AuNPs and leave a net excess of the other enantiomer in solution, thus resulting in enantioseparation. In this method, AuNPs do not need any labeling or modifying with chiral molecules. The method is more attractive because of its high sensitivity, low cost, ready availability and simple manipulation.     

Colorimetric detection of peroxynitrite-induced DNA damage using gold nanoparticles, and on the scavenging effects of antioxidants

We describe a rapid and convenient colorimetric method for the detection of oxidative DNA damage caused by peroxynitrite (ONOO^?) using unmodified gold nanoparticles (AuNPs). AuNPs are stable in the presence of single-stranded DNA (ssDNA) against the aggregation induced by a high ionic strength. If adsorbed ssDNA are cleaved by ONOO^? to form smaller fragments, the AuNPs rapidly aggregate due to electrostatic attraction. As a result, the color of the solution changes from red to blue, and this can be seen with bare eyes. We also have evaluated the activity of the antioxidants gallic acid, ascorbic acid and caffeic acid to scavenge ONOO^?. This method therefore also can be applied to screen for anti-oxidation drugs and agents.

Visual and surface plasmon resonance sensor for zirconium based on zirconium-induced aggregation of adenosine triphosphate-stabilized gold nanoparticles

Owing to its high affinity with phosphate, Zr(IV) can induce the aggregation of adenosine 5′-triphosphate (ATP)-stabilized AuNPs, leading to the change of surface plasmon resonance (SPR) absorption spectra and color of ATP-stabilized AuNP solutions. Based on these phenomena, visual and SPR sensors for Zr(IV) have been developed for the first time. The A_660 nm/A_518 nm values of ATP-stabilized AuNPs in SPR absorption spectra increase linearly with the concentrations of Zr(IV) from 0.5 μM to 100 μM (r = 0.9971) with a detection limit of 95 nM. A visual Zr(IV) detection is achieved with a detection limit of 30 μM. The sensor shows excellent selectivity against other metal ions, such as Cu²⁺, Fe³⁺, Cd²⁺, and Pb²⁺. The recoveries for the detection of 5 μM, 10 μM, 25 μM and 75 μM Zr(IV) in lake water samples are 96.0%, 97.0%, 95.6% and 102.4%, respectively. The recoveries of the proposed SPR method are comparable with those of ICP-OES method.     

Mechanism of mercury detection based on interaction of single-strand DNA and hybridized DNA with gold nanoparticles

Mechanisms of interaction of single-strand DNA and hybridized DNA on gold nanoparticles in the presence of Hg²⁺ was studied in this work. Recently the detection of Hg²⁺ using unmodified gold nanoparticles (AuNPs) combined with DNA is becoming a promising technique with the advantages of simplicity, cost-effectiveness and high sensitivity. However, few studies focused on the interaction of ssDNA and hybridized DNA on AuNPs to date. In the present work, we compared the interactions of different DNA probes on AuNPs using both absorption and fluorescence detection. It was found that there were only small partial dsDNA dissociated from the surface of AuNPs after hybridization in the presence of Hg²⁺. Moreover, we found that the aggregated AuNPs/DNA system tended to be dispersed again with increasing Hg²⁺ concentration up to 250 μM. Based on these results, the mechanisms of mercury detection based on interaction between DNA-conjugated gold nanoparticles were investigated. Positively charged dsDNA could bind to the surface of AuNPs and dominate the electrostatic interactions and consequently aggregation of the AuNPs/DNA system.     

Visual detection of arginine based on the unique guanidino group-induced aggregation of gold nanoparticles

A simple, cost-effective and rapid method for visual detection of arginine based on the citrate-capped gold nanoparticles (AuNPs) aggregation has been developed in this paper. Arginine is the only amino acid with guanidino group, and has the highest isoelectric point (pI) at about 10.8. At pH 9.62, negatively charged citrate-capped AuNPs are well dispersed because of strong electrostatic repulsion. However, positively charged arginine (pH < pI) easily induces negatively charged citrate-capped AuNPs aggregation through electrostatic and hydrogen-bonding interactions, resulting in a red to blue color change of the solution. Using a UV–vis spectrophotometer, the method enables the detection of arginine in the range of 0.08–13.2 μM with a detection limit (3σ/slope) of 16 nM. Particularly, as low as 0.4 μM arginine can be easily detected by the naked eye without using any complicated or expensive instruments. Furthermore, this method can provide satisfactory results for the determination of arginine in arginine injection and compound amino acid injection samples.     

Enhanced surface plasmon resonance by Au nanoparticles immobilized on a dielectric SiO2 layer on a gold surface

This paper introduces strategies for enhancement of a surface plasmon resonance (SPR) signal by adopting colloidal gold nanoparticles (AuNPs) and a SiO₂ layer on a gold surface. AuNPs on SiO₂ on a gold surface were compared with an unmodified gold surface and a SiO₂ layer on a gold surface with no AuNPs attached. The modified surfaces showed significant changes in SPR signal when biomolecules were attached to the surface as compared with an unmodified gold surface. The detection limit of AuNPs immobilized on a SPR chip was 0.1 ng mL⁻¹ for the prostate-specific antigen (PSA), a cancer marker, as measured with a spectrophotometer. Considering that the conventional ELISA method can detect ∼10 ng mL⁻¹ of PSA, the strategy described here is much more sensitive (∼100 fold). The enhanced shift of the absorption curve resulted from the coupling of the surface and particle plasmons by the SiO₂ layer and the AuNPs on the gold surface.     

Visual and fluorescent detection of acetamiprid based on the inner filter effect of gold nanoparticles on ratiometric fluorescence quantum dots

In this work, we develop a simple and rapid sensing method for the visual and fluorescent detection of acetamiprid (AC) based on the inner-filter effect (IFE) of gold nanoparticles (AuNPs) on ratiometric fluorescent quantum dots (RF-QDs). The RF-QDs based dual-emission nanosensor was fabricated by assembling green emissive QDs (QDs_539 nm, λ_em = 539 nm) on the surface of red emissive QDs (QDs_661 nm, λ_em = 661 nm)-doped silica microspheres. The photoluminescence (PL) intensity of RF-QDs could be quenched by AuNPs based on IFE. Acetamiprid can adsorb on the surface of AuNPs due to its cyano group that has good affinity with gold, which could induce the aggregation of AuNPs accompanying color change from red to blue. Thus, the IFE of AuNPs on RF-QDs was weakened and the PL intensity of RF-QDs was recovered accordingly. Under the optimized conditions, the PL intensity of the RF-QDs/AuNPs system was proportional to the concentration of AC in the range of 0.025–5.0 μg mL⁻¹, with a detection limit of 16.8 μg L⁻¹. The established method had been used for AC detection in environmental and agricultural samples with satisfactory results.     

Synthesis of gold nanoparticle necklaces using linear-dendritic copolymers

Linear-dendritic copolymers containing hyperbranched poly(citric acid) and linear poly(ethylene glycol) blocks (PCA-PEG-PCA) were used as reducing and capping agents to synthesize and support gold nanoparticles (AuNPs). PCA-PEG-PCA copolymers with 1758, 1889 and 3446 molecular weights, called A1, A2 and A3 through this work, respectively, were synthesized using 2, 5, and 10 citric acid/PEG molar ratios. The diameter of A1, A2 and A3 in a fresh water solution was investigated using dynamic light scattering (DLS) and it was between 1.8 and 2.8 nm. AuNPs were simply synthesized and supported by addition a boiling aqueous solution of HAuCl₄ to aqueous solutions of A1, A2 and A3. Supported AuNPs were stable in water for several months and agglomeration was not occurred. The loading capacity of A1, A2 and A3 and the size of synthesized AuNPs were investigated using UV spectroscopy and transmission electron microscopy (TEM). It was found that the loading capacity of PCA-PEG-PCA copolymers depend on the concentration of copolymers and the size of their poly(citric acid) parts directly. For example average loading capacities for 400 μM concentration of A1, A2 and A3 were 32.24, 37.4 and 41.52 μM, respectively, and average loading capacities for 400, 200 and 100 μM concentration of A1 were 32.24, 20.28 and 9.1 μM, respectively. Interestingly there was a reverse relation between the size of synthesized AuNPs and size of poly(citric acid) parts of PCA-PEG-PCA copolymers.     

A simple visual method for DNA detection based on the formation of gold nanoparticles

A simple visual method for DNA detection during the formation of gold nanoparticles (AuNPs) was developed based on different electrostatic properties of single strand DNA (ssDNA) and double strand DNA (dsDNA). Since the ssDNA is easy to bind to AuNPs due to its exposed bases which could prevent salt-induced aggregation of AuNPs. The dsDNA always present negative charge because its negatively charged phosphate backbone is exposed. In this case, the dsDNA could disturb the adsorption between dsDNA and AuNPs and result in non-aggregation of AuNPs. After hybridization, chloroauric acid and ascorbic acid were added to the mixture solution, and the solution changed to red immediately and turned to purple in 10 min in the present of target DNA. TEM results confirmed that the change of color stemed from aggregation of AuNPs. In order to obtain accurate results by naked eye, the DNA detection assay should be conducted under pH 7.0.     

Homogeneous, unmodified gold nanoparticle-based colorimetric assay of hydrogen peroxide

An unmodified gold nanoparticle-based colorimetric assay system in homogeneous format has been developed using hydrogen peroxide (H₂O₂) as a model analyte. H₂O₂ is added to o-phenylenediamine/horseradish peroxidase solution, and allowed to react for 10 min. Then, unmodified gold nanoparticles that serve as “reaction indicators” are added to the reaction solution. The resulting mixture color changes dramatically from red to blue. The reason is that azoaniline, a horseradish peroxidase-catalyzed oxidation product, induces the nanoparticle aggregation. Using this approach, H₂O₂ can be semiquantitatively determined over the concentration range of ∼4 orders of magnitude by the naked eye. If the observed peak intensity at 420 nm is used for the construction of the calibration plot, hydrogen peroxide can be accurately determined down to concentration levels of 1.3 × 10⁻⁶ M. Compared with the conventional electrochemical protocol, this sensing system offers several important advantages: (1) ability to be monitored by the naked eye, (2) avoiding the need of surface modification of electrodes or gold nanoparticles and (3) detection in homogeneous solution. It is worthy of note that this efficient and convenient strategy is also suitable for the detection of other species, such as glucose and cholesterol.     

Sensitive colorimetric assays for α-glucosidase activity and inhibitor screening based on unmodified gold nanoparticles

A colorimetric sensor has been developed in this work to sensitively detect α-glucosidase activity and screen α-glucosidase inhibitors (AGIs) utilizing unmodified gold nanoparticles (AuNPs). The sensing strategy is based on triple-catalytic reaction triggered by α-glucosidase. In the presence of α-glucosidase, aggregation of AuNPs is prohibited due to the oxidation of cysteine to cystine in the system. However, with addition of AGIs, cysteine induced aggregation of AuNPs occurs. Thus, a new method for α-glucosidase activity detection and AGIs screening is developed by measuring the UV–vis absorption or visually distinguishing. A well linear relation is presented in a range of 0.0025–0.05 U mL⁻¹. The detection limit is found to be 0.001 U mL⁻¹ for α-glucosidase assay, which is one order of magnitude lower than other reports. The IC₅₀ values of four kinds of inhibitors observed with this method are in accordance with other reports. The using of unmodified AuNPs in this work avoids the complicated and time-consuming modification procedure. This simple and efficient colorimetric method can also be extended to other enzymes assays.     

Ascorbic acid supported Carboxymethyl cellulose stabilized silver nanoparticles as optical nanoprobe for Au3+ detection in environmental sample

Heavy metals (HMs), pollution of major environmental matrices and its attendant effects on human health and the environment, continue to generate huge scientific interest, particularly in monitoring and detection. Herein, the optical property of carboxymethyl cellulose stabilized silver nanoparticles (CMC-AgNPs), supported with ascorbic acid, is exploited as a colorimetric probe for the detection of toxic Au³⁺ ion in solution. The as-synthesized CMC-AgNPs showed sharp absorption maximum at 403 nm, with sparkling yellow color and average particles size distribution less than 10 nm. It was further characterized using ATR-FTIR, TEM, FESEM/EDS, XRD and DLS/zeta potential analyzer. Au³⁺ ion detection strategy involves the addition of ascorbic acid (AA) to a pH adjusted CMC-AgNPs, followed by the analyte addition. AA would facilitate the reduction of Au³⁺ on CMC-AgNPs (seed), with resultant color perturbations from light yellow to yellow, orange, ruby red and purple red, under 8 min incubation, at room temperature (RT). The CMC-AgNPs could also serve as a catalyst, by promoting AA mediated reduction of Au³⁺, in-situ. Moreover, we propose, that the color and the absorption spectra change is attributed to the deposition of gold nanoparticles (AuNPs), on the CMC-AgNPs/AA probe, to form (CMC-Ag@Au) nanostructures, depending on the analyte concentration. Absorbance ratio (A₅₄₀/A₄₀₃) showed good linearity with Au³⁺ concentration from 0.25 to 100.0 µM, and an estimated LOD of 0.061 µM. The assay was applied to Au³⁺ detection in environmental wastewater sample, showing satisfactory real sample detection potentiality.     

Preparation of gold nanoparticles on eggshell membrane and their biosensing application

A facile green biosynthesis method has been successfully developed to prepare gold nanoparticles (AuNPs) of various core sizes (25 ± 7 nm) using a natural biomaterial, eggshell membrane (ESM) at ambient conditions. In situ synthesis of AuNPs-immobilized ESM is conducted in a simple manner by immersing ESM in a pH 6.0 aqueous solution of HAuCl₄ without adding any reductant. The formation of AuNPs on ESM protein fibers is attributed to the reduction of Au(III) ions to Au(0) by the aldehyde moieties of the natural ESM fibers. Energy dispersive X-ray spectroscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, and X-ray powder diffraction unambiguously identify the presence of AuNPs on ESM. The effect of pH on the in situ synthesis of AuNPs on ESM has been investigated in detail. The pH of the gold precursor (HAuCl₄) solution can influence the formation rate, dispersion and size of AuNPs on ESM. At pH ≤3.0 and ≥7.0, no AuNPs are observed on ESM while small AuNPs are homogeneously dispersed on ESM at pH 4.0-6.0. The optimal pH for AuNPs formation on ESM is 6.0. AuNPs/ESMs are used to immobilize glucose oxidase (GO_x) for glucose biosensing. AuNPs on ESM can increase the enzyme activity of GO_x. The linear response range of the glucose biosensor is 20 μM to 0.80 mM glucose with a detection limit of 17 μM (S/N = 3). The biosensor has been successfully applied to determine the glucose content in commercial glucose injections. Our work provides a very simple, non-toxic, convenient, and green route to synthesize AuNPs on ESM which is potentially useful in the biosensing field.     

A simple visual method for DNA detection based on the formation of gold nanoparticles

A simple visual method for DNA detection during the formation of gold nanoparticles (AuNPs) was developed based on different electrostatic properties of single strand DNA (ssDNA) and double strand DNA (dsDNA). It could identify target DNA in 10 min.     

Colorimetric detection of potassium ions using aptamer-functionalized gold nanoparticles

Herein, a simple and novel colorimetric method for detection of potassium ions (K⁺) was developed. The colorimetric experiments revealed that upon the addition of K⁺, the conformation of anti-K⁺ aptamer in solution changed from random coil structure to compact rigid G-quadruplex one. This compact rigid G-quadruplex structure could not protect AuNPs against K⁺-induced aggregation, and thus the visible color change from wine-red to blue-purple could be observed by the naked eye. The linear range of the colorimetric aptasensor covered a large variation of K⁺ concentration from 5 nM to 1 μM and the detection limit of 5 nM was obtained. Moreover, this assay was able to detect K⁺ with high selectivity and had great potential applications.     

Colorimetric method for determination of bisphenol A based on aptamer-mediated aggregation of positively charged gold nanoparticles

A sensitive, specific and rapid colorimetric aptasensor for the determination of the plasticizer bisphenol A (BPA) was developed. It is based on the use of gold nanoparticles (AuNPs) that are positively charged due to the modification with cysteamine which is cationic at near-neutral pH values. If aptamers are added to such AuNPs, aggregation occurs due to electrostatic interactions between the negatively-charged aptamers and the positively-charged AuNPs. This results in a color change of the AuNPs from red to blue. If a sample containing BPA is added to the anti-BPA aptamers, the anti-BPA aptamers undergo folding via an induced-fit binding mechanism. This is accompanied by a conformational change, which prevents the aptamer-induced aggregation and color change of AuNPs. The effect was exploited to design a colorimetric assay for BPA. Under optimum conditions, the absorbance ratio of A ₅₂₇/A ₆₈₀ is linearly proportional to the BPA concentration in the range from 35 to 140 ng∙mL⁻¹, with a detection limit of 0.11 ng∙mL⁻¹. The method has been successfully applied to the determination of BPA in spiked tap water and gave recoveries between 91 and 106 %. Data were in full accordance with results obtained from HPLC. This assay is selective, easily performed, and in our perception represents a promising alternative to existing methods for rapid quantification of BPA.

The negatively-charged anti-BPA aptamers can absorb onto the positively-charged cysteamine-capped AuNPs (cysteamine-AuNPs) via electrostatic interactions, which can cause the aggregation of AuNPs accompanied by a red-to-blue color change. In the presence of BPA, the specific binding of BPA to the aptamers induces the conformation changes of anti-BPA aptamers, which can release the aptamers from cysteamine-AuNPs and thus prevent the aggregation and color change of cysteamine-AuNPs.

     

A novel electrochemical biosensor based on the hemin-graphene nano-sheets and gold nano-particles hybrid film for the analysis of hydrogen peroxide

Hydrogen peroxide is an important analyte in biochemical, industrial and environmental systems. Therefore, development of novel rapid and sensitive analytical methods is useful. In this work, a hemin-graphene nano-sheets (H-GNs)/gold nano-particles (AuNPs) electrochemical biosensor for the detection of hydrogen peroxide (H₂O₂) was researched and developed; it was constructed by consecutive, selective modification of the GCE electrode. Performance of the H-GNs/AuNPs/GCE was investigated by chronoamperometry, and AFM measurements suggested that the graphene flakes thickness was ∼1.3 nm and that of H-GNs was ∼1.8 nm, which ultimately indicated that each hemin layer was ∼0.25 nm. This biosensor exhibited significantly better electrocatalytic activity for the reduction of hydrogen peroxide in comparison with the simpler AuNPs/GCE and H-GNs/GCE; it also displayed a linear response for the reduction of H₂O₂ in the range of 0.3 μM to 1.8 mM with a detection limit of 0.11 μM (S N⁻¹ = 3), high sensitivity of 2774.8 μA mM⁻¹ cm⁻², and a rapid response, which reached 95% of the steady state condition within 5 s. In addition, the biosensor was unaffected by many interfering substances, and was stable over time. Thus, it was demonstrated that this biosensor was potentially suitable for H₂O₂ analysis in many types of sample.     

Sensitive determination of lysozyme by using a luminescent and colorimetric probe based on the aggregation of gold nanoparticles induced by an anionic ruthenate(II) complex

The negatively charged ruthenate(II) complex [Ru(bpy)(PPh₃)(CN)₃]^? and gold nanoparticles (AuNPs) were used for detecting lysozyme (LYS). The luminescence of the ruthenate(II) complex is quenched by AuNPs, and this induces the aggregation of AuNPs and a color change from red to blue. After addition of lysozyme, the positively charged lysozyme and the negatively charged ruthenate(II) complex bind each other by electrostatic interaction firstly. This prevents AuNPs from aggregation and quenches the emission of the ruthenate(II) complex. Its luminescence and the degree of aggregation of the AuNPs can be used to quantify LYS. The fluorometric calibration plot is linear in the 0.01 to 0.20 μM LYS concentration range, and the calibration plot is linear between 0.02 and 0.20 μM of LYS. The color of the solution can be easily distinguished by bare eyes at 0.08 μM or higher concentration of LYS. The applicability of the method was verified by the correct analysis of LYS in chicken egg white.

Open image in new window

Graphical abstract Schematic of a luminometric and colorimetric probe based on the induced aggregation of gold nanoparticles by an anionic luminescent ruthenate(II) complex or sensitive lysozyme detection.

     

Gold nanoparticles-based colorimetric and visual creatinine assay

We demonstrate a selective and sensitive method for determination of creatinine using citrate-stabilized gold nanoparticles (AuNPs) as a colorimetric probe. It is based on a direct cross-linking reaction that occurs between creatinine and AuNPs that causes aggregation of AuNPs and results in a color change from wine red to blue. The absorption peak is shifted from 520 to 670 nm. Under the optimized conditions, the shift in the absorption peak is related the logarithm of the creatinine concentration in the 0.1 to 20 mM range, and the instrumental detection limit (LOD) is 80 μM. This LOD is about one order of magnitude better than that that of the Jaffé method (720 μM). The assay displays good selectivity over interfering substances including various inorganic ions, organic small compounds, proteins, and biothiols. It was successfully employed to the determination of creatinine in spiked human urine.

The colorimetric assay for creatinine uses citrate-stabilized gold nanoparticles (AuNPs) and a direct cross-linking reaction that occurs between creatinine and AuNPs that causes aggregation of AuNPs and results in a color change from wine red to blue.