Separation and quantification of [RhCln(H2O)6−n] (n = 0-6) complexes, including stereoisomers, by means of ion-pair HPLC-ICP-MS

A hyphenated ion-pair (tetrabutylammonium chloride—TBACl) reversed phase (C₁₈) HPLC-ICP-MS method (High Performance Liquid Chromatography Inductively Coupled Plasma Mass Spectroscopy) for anionic Rh(III) aqua chlorido-complexes present in an HCl matrix has been developed. Under optimum chromatographic conditions it was possible to separate and quantify cationic Rh(III) complexes (eluted as a single band), [RhCl₃(H₂O)₃], cis-[RhCl₄(H₂O)₂]⁻, trans-[RhCl₄(H₂O)₂]⁻ and [RhCl_n(H₂O)_6−n]³⁻ⁿ (n = 5, 6) species. The [RhCl_n(H₂O)_6−n]³⁻ⁿ (n = 5, 6) complex anions eluted as a single band due to the relatively fast aquation of [RhCl₆]³⁻ in a 0.1 mol L⁻¹ TBACl ionic strength mobile phase matrix. Moreover, the calculated t_1/2 of 1.3 min for [RhCl₆]³⁻ aquation at 0.1 mol kg⁻¹ HCl ionic strength is significantly lower than the reported t_1/2 of 6.3 min at 4.0 mol kg⁻¹ HClO₄ ionic strength. Ionic strength or the activity of water in this context is a key parameter that determines whether [RhCl_n(H₂O)_6−n]³⁻ⁿ (n = 5, 6) species can be chromatographically separated. In addition, aquation/anation rate constants were determined for [RhCl_n(H₂O)_6−n]³⁻ⁿ (n = 3-6) complexes at low ionic strength (0.1 mol kg⁻¹ HCl) by means of spectrophotometry and independently with the developed ion-pair HPLC-ICP-MS technique for species assignment validation. The Rh(III) samples that was equilibrated in differing HCl concentrations for 2.8 years at 298 K was analyzed with the ion-pair HPLC method. This analysis yielded a partial Rh(III) aqua chlorido-complex species distribution diagram as a function of HCl concentration. For the first time the distribution of the cis- and trans-[RhCl₄(H₂O)₂]⁻ stereoisomers have been obtained. Furthermore, it was found that relatively large amounts of ‘highly’ aquated [RhCl_n(H₂O)_6−n]³⁻ⁿ (n = 0-4) species persist in up to 2.8 mol L⁻¹ HCl and in 1.0 mol L⁻¹ HCl the abundance of the [RhCl₅(H₂O)]²⁻ species is only 8-10% of the total, far from the 70-80% as previously proposed. A 95% abundance of the [RhCl₆]³⁻ complex anion occurs only when the HCl concentration is above 6 mol L⁻¹. The detection limit for a Rh(III) species eluted from the column is below 0.147 mg L⁻¹.     

High-yield syntheses of [Rh7(CO)16] and [Rh14(CO)25] working in ethylene glycol solution under 1 atm of CO

The anionic rhodium carbonyl clusters [Rh₇(CO)₁₆]³⁻ and [Rh₁₄(CO)₂₅]⁴⁻ can be easily prepared by a new simple and high yield one-pot synthesis starting from RhCl₃·nH₂O dissolved in ethylene glycol and involving two steps: (i) treatment of RhCl₃·nH₂O under 1 atm of CO at 50 °C to give [Rh(CO)₂Cl₂]⁻; (ii) addition of a base (CH₃CO₂Na or Na₂CO₃) followed by reductive carbonylation under 1 atm of CO at an adequate temperature (50 °C for [Rh₇(CO)₁₆]³⁻; 150 °C for [Rh₁₄(CO)₂₅]⁴⁻). These new syntheses are more convenient than those previously reported, especially since such clusters are not accessible via silica surface-mediated reactions. This different behavior is due to the particular stabilization on the silica surface and under 1 atm of CO of an anionic carbonyl cluster, called A, which does not allow the formation of a higher nuclearity carbonyl cluster, called B, which was shown to be the key-intermediate in the synthesis of [Rh₁₄(CO)₂₅]⁴⁻ working in ethylene glycol solution. Although it was not possible to isolate crystals of A and B suitable for X-ray structural determination, a combination of cyclovoltammetry, one of the few examples so far available of the use of this technique for anionic rhodium carbonyl clusters, infrared spectroscopy and elemental analyses suggest that A and B are probably the never reported [Rh₇(CO)₁₄]⁻ and [Rh₁₅(CO)₂₈]³⁻ clusters, respectively. In particular the tentative formulation of the two clusters was carried out by a non-conventional method based on the existence of a linear correlation between carbonyl frequencies of the main band and the [(charge/Rh atoms)/CO number] ratio.     

103Rh-NMR-spektroskopischer Nachweis der gemischten Nonahalogenodirhodate(III), [Rh2ClnBr9–n]3−, n = 0–9

¹⁰³Rh NMR Spectroscopic Evidence of Mixed Nonahalogenodirhodates(III), [Rh₂Cl_nBr_9–n]^3?, n = 0–9 On heating a mixture of the tetrabutylammonium salts (TBA)₃[Rh₂Cl₉] and (TBA)₃[Rh₂Br₉] at 60°C in propylenecarbonate the complete system of the mixed nonahalogenodirhodates(III) [Rh₂Cl_nBr_9–n]^3?, n = 0–9 is formed. In the ¹⁰³Rh nmr spectra 40 different species have been detected, 16 with two equivalent ¹⁰³Rh atoms each resulting in one singlet and 24 with inequivalent ¹⁰³Rh atoms each pair giving two resonances. The signals of the geometric isomeres are not resolved. All 64 expected resonances are really observed. By additional measuring of the ¹⁰³Rh nmr spectra of the fractions n = 0–4 separable by ion exchange chromatography on DEAE cellulose, and utilizing characteristic increments of chemical shifts the complete and unambiguous assignment of all signals is achieved.     

Iodomethane oxidative addition and CO migratory insertion in monocarbonylphosphine complexes of the type [Rh((C6H5)COCHCO((CH2)nCH3))(CO)(PPh3)]: Steric and electronic effects

The chemical kinetics, studied by UV/Vis, IR and NMR, of the oxidative addition of iodomethane to [Rh((C₆H₅)COCHCOR)(CO)(PPh₃)], with R = (CH₂)_nCH₃, n = 1-3, consists of three consecutive reaction steps that involves isomers of two distinctly different classes of Rh^III-alkyl and two distinctly different classes of Rh^III-acyl species. Kinetic studies on the first oxidative addition step of [Rh((C₆H₅)COCHCOR)(CO)(PPh₃)] + CH₃I to form [Rh((C₆H₅)COCHCOR)(CH₃)(CO)(PPh₃)(I)] revealed a second order oxidative addition rate constant approximately 500-600 times faster than that observed for the Monsanto catalyst [Rh(CO)₂I₂]⁻. The reaction rate of the first oxidative addition step in chloroform was not influenced by the increasing alkyl chain length of the R group on the β-diketonato ligand: k₁ = 0.0333 ([Rh((C₆H₅)COCHCO(CH₂CH₃))(CO)(PPh₃)]), 0.0437 ([Rh((C₆H₅)COCHCO(CH₂CH₂CH₃))(CO)(PPh₃)]) and 0.0354 dm³ mol⁻¹ s⁻¹ ([Rh((C₆H₅)COCHCO(CH₂CH₂CH₂CH₃))(CO)(PPh₃)]). The pK_a^′ and keto-enol equilibrium constant, K_c, of the β-diketones (C₆H₅)COCH₂COR, along with apparent group electronegativities, χ_R of the R group of the β-diketones (C₆H₅)COCH₂COR, give a measurement of the electron donating character of the coordinating β-diketonato ligand: (R, pK_a^′, K_c, χ_R) = (CH₃, 8.70, 12.1, 2.34), (CH₂CH₃, 9.33, 8.2, 2.31), (CH₂CH₂CH₃, 9.23, 11.5, 2.41) and (CH₂CH₂CH₂CH₃, 9.33, 11.6, 2.22).     

Synthesis and structure of a 1,6-hexyldiamine heptaborate, [H3N(CH2)6NH3][B7O10(OH)3]

A new 1,6-hexyldiamine heptaborate, [H₃N(CH₂)₆NH₃][B₇O₁₀(OH)₃] (1), has been solvothermally synthesized and characterized by single-crystal X-ray diffraction, FTIR, elemental analysis, and thermogravimetric analysis. Compound 1 crystallizes in monoclinic system, space group P2₁/n with a=8.042(2) Å, b=20.004(4) Å, c=10.103(2) Å, and β=90.42(3)°. The anionic [B₇O₁₀(OH)₃]_n²ⁿ⁻ layers are interlinked via hydrogen bonding to form a 3D supramolecular network containing large channels, in which the templated [H₃N(CH₂)₆NH₃]²⁺ cations are located.     

Thermochemistry of NaRb[B4O5(OH)4]·4H2O

The enthalpies of solution of NaRb[B₄O₅(OH)₄]·4H₂O in approximately 1 mol dm⁻³ aqueous hydrochloric acid and of RbCl in aqueous (hydrochloric acid + boric acid + sodium chloride) were determined. From these results and the enthalpy of solution of H₃BO₃ in approximately 1 mol dm⁻³ HCl(aq) and of sodium chloride in aqueous (hydrochloric acid + boric acid), the standard molar enthalpy of formation of −(5128.02 ± 1.94) kJ mol⁻¹ for NaRb[B₄O₅(OH)₄]·4H₂O was obtained from the standard molar enthalpies of formation of NaCl(s), RbCl(s), H₃BO₃(s) and H₂O(l). The standard molar entropy of formation of NaRb[B₄O₅(OH)₄]·4H₂O was calculated from the Gibbs free energy of formation of NaRb[B₄O₅(OH)₄]·4H₂O computed from a group contribution method.     

N,N-polymethylene-bisadenine complexes with d metal ions

The reaction of N⁹,N^9′-(tri or tetramethylene)-bisadenines (Ade₂C_x; x = 3 or 4) in HCl 2 M at 50 °C with MCl₂ · 2H₂O [M = Zn(II), Cd(II)] yields outer sphere compounds like the previously described [(H-Ade)₂C₃][ZnCl₄] · H₂O (3) and [(H-Ade)₂C₃]₂[Cd₂Cl₈(H₂O)₂] · 4H₂O (4) for Ade₂C₃ and the new {[(H-Ade)₂C₄][Cd₂Cl₆(H₂O)₂] · 2H₂O}_n (5) for Ade₂C₄. On the other hand, only in case of Zn(II) complexes by changing [HCl] to 0.1 M, the inner sphere compounds [H-(Ade)₂C₃(ZnCl₃)] (6) and [H-(Ade)₂C₄(ZnCl₃)] · 1.5H₂O (7) are obtained. X-ray diffraction study of compound 6, which represents the first inner sphere complex with a N⁹,N^9′-bisadenine, shows a zwitterionic form with one adenine ring protonated at N(1) while the other ring is coordinated via N(7) to a ZnCl₃ moiety as in other alkyl-adenine derivatives. In addition, with Ade₂C₄, is also possible to obtain another inner sphere complex: [(H-Ade)₂C₄(ZnCl₃)₂] · 3H₂O (8).     

Calorimetric study and thermal analysis of [Gd4/3Y2/3(Gly)6(H2O)4](ClO4)6·5H2O and [ErY(Gly)6(H2O)4](ClO4)6·5H2O (Gly: glycin)

Two solid-state coordination compounds of rare earth metals with glycin, [Gd_4/3Y_2/3(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O and [ErY(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O were synthesized. The low-temperature heat capacities of the two coordination compounds were measured with an adiabatic calorimeter over the temperature range from 78 to 376 K. [Gd_4/3Y_2/3(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O melted at 342.90 K, while [ErY(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O melted at 328.79 K. The molar enthalpy and entropy of fusion for the two coordination compounds were determined to be 18.48 kJ mol⁻¹ and 53.9 J K⁻¹ mol⁻¹ for [Gd_4/3Y_2/3(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O, 1.82 kJ mol⁻¹ and 5.5 J K⁻¹ mol⁻¹ for [ErY(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O, respectively. Thermal decompositions of the two coordination compounds were studied through the thermogravimetry (TG). Possible mechanisms of the decompositions are discussed.     

Syntheses, crystal structures and Raman spectra of Ba(BF4)(PF6), Ba(BF4)(AsF6) and Ba2(BF4)2(AsF6)(H3F4); the first examples of metal salts containing simultaneously tetrahedral BF4 and octahedral AF6 anions

In the system BaF₂/BF₃/PF₅/anhydrous hydrogen fluoride (aHF) a compound Ba(BF₄)(PF₆) was isolated and characterized by Raman spectroscopy and X-ray diffraction on the single crystal. Ba(BF₄)(PF₆) crystallizes in a hexagonal space group with a=10.2251(4) Å, c=6.1535(4) Å, V=557.17(5) Å³ at 200 K, and Z=3. Both crystallographically independent Ba atoms possess coordination polyhedra in the shape of tri-capped trigonal prisms, which include F atoms from BF₄⁻ and PF₆⁻ anions. In the analogous system with AsF₅ instead of PF₅ the compound Ba(BF₄)(AsF₆) was isolated and characterized. It crystallizes in an orthorhombic Pnma space group with a=10.415(2) Å, b=6.325(3) Å, c=11.8297(17) Å, V=779.3(4) Å³ at 200 K, and Z=4. The coordination around Ba atom is in the shape of slightly distorted tri-capped trigonal prism which includes five F atoms from AsF₆⁻ and four F atoms from BF₄⁻ anions. When the system BaF₂/BF₃/AsF₅/aHF is made basic with an extra addition of BaF₂, the compound Ba₂(BF₄)₂(AsF₆)(H₃F₄) was obtained. It crystallizes in a hexagonal P6₃/mmc space group with a=6.8709(9) Å, c=17.327(8) Å, V=708.4(4) Å³ at 200 K, and Z=2. The barium environment in the shape of tetra-capped distorted trigonal prism involves 10 F atoms from four BF₄⁻, three AsF₆⁻ and three H₃F₄⁻ anions. All F atoms, except the central atom in H₃F₄ moiety, act as μ₂-bridges yielding a complex 3-D structural network.     

Remarks on the process of homogeneous carbonylation of rhodium compounds by N,N-dimethylformamide

Reductive carbonylation of rhodium(III) chloride complexes, commercial RhCl₃ · nH₂O neutralized with BaCO₃, (Me₂NH₂)₂[RhCl₅(DMF)], (PPh₄)[RhCl₄(H₂O)₂], RhCl₃(DMF)₃, RhCl₃(CH₃CN)₃, RhCl₃(CH₃CN)₂(DMF), [Rh(CO)₂Cl₃]₂, and rhodium(I) complex, Rh(PPh₃)₃Cl, by N,N-dimethylformamide (DMF) is studied. The data obtained support the conception of direct carbonyl group transfer from DMF molecule to the Rh metal center. The mechanistic scheme of carbonylation process is refined and discussed with regard of new experimental results.     

Stabilisation of heterobimetallic networks by crown ethers and hydrogen-bonding in [Ni(H2O)6][Cu3Cl8(H2O)2] · (15-crown-5)2 · 2H2O: Structure and magnetism

[Ni(H₂O)₆][Cu₃Cl₈(H₂O)₂] · (15-crown-5)₂ · 2H₂O can be conveniently prepared by the interaction of NiCl₂ · 6H₂O, CuCl₂ · 2H₂O and 15-crown-5 in water. The X-ray crystal structure reveals an ionic complex involved in a hydrogen-bonded two dimensional network with the [Ni(H₂O)₆]²⁺ and [Cu₃Cl₈(H₂O)₂]²⁻ ions sandwiched between the 15-crown-5 macrocycles. The magnetic susceptibility data (4–300 K) and magnetisation isotherms (2–5.5 K; 0–5 T) are best interpreted in terms of intra-trimer ferromagnetic coupling within the [Cu₃Cl₈(H₂O)₂]²⁻ moieties, with J ∼ 6 cm⁻¹, and antiferromagnetic coupling between the trimers, the latter mediated by H-bonding pathways. Comparisons are made to other reported quaternary ammonium salts of [Cu₃Cl₈]²⁻ and [Cu₃Cl₁₂]⁶⁻, most of which display structures that involve close stacking of such Cu(II) trimers, rather than being of the present isolated, albeit H-bonded, types.     

Hydrothermal synthesis, characterization and thermochemistry of Ca2[B2O4(OH)2]·0.5H2O

A pure calcium borate Ca₂[B₂O₄(OH)₂]·0.5H₂O has been synthesized under hydrothermal condition and characterized by XRD, FT-IR and TG as well as by chemical analysis. The molar enthalpy of solution of Ca₂[B₂O₄(OH)₂]·0.5H₂O in HC1·54.582H₂O was determined. From a combination of this result with measured enthalpies of solution of H₃BO₃ in HC1·54.561H₂O and of CaO in (HCl + H₃BO₃) solution, together with the standard molar enthalpies of formation of CaO(s), H₃BO₃(s) and H₂O(l), the standard molar enthalpy of formation of −(3172.5 ± 2.5) kJ mol⁻¹ of Ca₂[B₂O₄(OH)₂]·0.5H₂O was obtained.     

Phase transitions and molecular motions in [Cd(H2O)6](BF4)2 studied by DSC, H and F NMR and FT-MIR

Two solid phase transitions of [Cd(H₂O)₆](BF₄)₂ occurring on heating at T_C2=183.3 K and T_C1=325.3 K, with 2 K and 5 K hysteresis, respectively, were detected by differential scanning calorimetry (DSC). High value of entropy changes indicated large orientational disorder of the high temperature and intermediate phase. Nuclear magnetic resonance (¹H NMR and ¹⁹F NMR) relaxation measurements revealed that the phase transitions at T_C1 and T_C2 were associated with a drastic and small change, respectively, of the both spin-lattice relaxation times: T₁(¹H) and T₁(¹⁹F). These relaxation processes were connected with the “tumbling” motions of the [Cd(H₂O)₆]²⁺, reorientational motions of the H₂O ligands, and with the iso- and anisotropic reorientation of the BF₄⁻ anions. The cross-relaxation effect was observed in phase III. The line width and the second moment of the ¹H and ¹⁹F NMR line measurements revealed that the H₂O reorientate in all three phases of the title compound. On heating the onset of the reorientation of 3 H₂O in the [Cd(H₂O)₆]⁺², around the three-fold symmetry axis of these octahedron, causes the isotropic reorientation of the whole cation. The BF₄⁻ reorientate isotropically in the phases I and II, but in the phase III they perform slow reorientation only about three- or two-fold axes. A small distortion in the structure of BF₄⁻ as well as of [Cd(H₂O)₆]²⁺ is postulated. The temperature dependence of the bandwidth of the O-H stretching mode measured by Fourier transform middle infrared spectroscopy (FT-MIR) indicated that the activation energy for the reorientation of the H₂O did not change much at the T_C2 phase transition.     

Specific F binding to phenyl ring of aromatic polymers

Most of the hydrogels deswell more remarkably in F⁻ containing solutions than in other monovalent anion containing solutions. However, significant deswelling followed by abnormal reswelling of polymer gel in KF solutions with increasing F⁻ concentration was observed in a series of polymer gels consisted of phenyl rings, for instance, poly(styrene sulfonic acid) (PSSA), hydroxypropyl methylcellulose phthalate (HPMCP) and poly(4-vinyl phenol) (P4VPh) gel. Driving force of this phenomenon was studied to reveal the specific interactions involved in the aqueous systems of aromatic polymers. Elemental analysis and XPS results suggest that F⁻ is embedded to the gel by the physical adsorption of KF, as well as the interactions between phenyl ring and F⁻. Further theoretical calculations revealed that the interaction may be (phenyl)CH?F⁻(H₂O)_n interaction, which is stronger than (phenyl)CH?(H₂O)_n hydrogen bond. This kind of interaction decreases with the increasing water number and it is invalid when the surrounding water number is more than 5 for the phenol-F⁻(H₂O)_n system. Therefore, we conclude that F⁻ could bind to phenyl ring via such (phenyl)CH?F⁻(H₂O)_n interaction in solutions with low hydrophilicity. The strong polarization effect of F⁻ and (phenyl)CH?F⁻(H₂O)_n interaction are two important driving forces for the reswelling of gels.     

Synthesis and characterization of three new fluorovanadate complexes: N(C2H5)4[VOF4], N(CH3)4[VOF3Cl], N(C4H9)4[VOF3Br] and theoretical calculations of VOF4, VOF3Cl and VOF3Br ions

The reaction of VOF₃ with (C₂H₅)₄NF, (CH₃)₄NCl and (C₄H₉)₄NBr salts in anhydrous CH₃CN produced new complexes with the anion general formula [VOF₃X]⁻ in that (X = F⁻, Cl⁻, Br⁻). These were characterized by elemental analysis, IR, UV/Visible and ¹⁹F NMR spectroscopy. The optimized geometries and frequencies of the stationary point are calculated at the B3LYP/6-311G level of theory. Theoretical results showed that the VX (X = F, Cl, Br) bond length values for the [VOF₃X]⁻ in compounds 1-3 are 1.8247, 2.4031 and 2.5595 Å, respectively. Also, the VF₅ bond length values in [VOF₃X]⁻ are 1.824, 1.812 and 1.802 Å, respectively. These results reveal that the bond order for VX bonds decrease from compounds 1 to 3, while for VF₅ bonds, the bond orders increase. It can be concluded that the decrease of VX bonds lengths and the increase of VF₅ bond lengths in compounds 1-3 result from the increase of the hyperconjugation from compounds 1 to 3. Harmonic vibrational frequencies and infrared intensities for VOF₄⁻, VOF₃Cl⁻ and VOF₃Br⁻ are studied by means of theoretical and experimental methods. The calculated frequencies are in reasonable agreement with the experiment values. These data can be used in models of phosphoryl transfer enzymes because vanadate can often bind to phosphoryl transfer enzymes to form a trigonal-bipyramidal structure at the active site.     

Enzyme mimics of spinel-type CoxNi1−xFe2O4 magnetic nanomaterial for eletroctrocatalytic oxidation of hydrogen peroxide

A series of spinel-type Co_xNi_1−xFe₂O₄ (x = 0, 0.2, 0.4, 0.5, 0.6, 0.8, 1.0) magnetic nanomaterials were solvothermally synthesized as enzyme mimics for the eletroctrocatalytic oxidation of H₂O₂. X-ray diffraction and scanning electron microscope were employed to characterize the composition, structure and morphology of the material. The electrochemical properties of spinel-type Co_xNi_1−xFe₂O₄ with different (Co/Ni) molar ratio toward H₂O₂ oxidation were investigated, and the results demonstrated that Co_0.5Ni_0.5Fe₂O₄ modified carbon paste electrode (Co_0.5Ni_0.5Fe₂O₄/CPE) possessed the best electrocatalytic activity for H₂O₂ oxidation. Under optimum conditions, the calibration curve for H₂O₂ determination on Co_0.5Ni_0.5Fe₂O₄/CPE was linear in a wide range of 1.0 × 10⁻⁸–1.0 × 10⁻³ M with low detection limit of 3.0 × 10⁻⁹ M (S/N = 3). The proposed Co_0.5Ni_0.5Fe₂O₄/CPE was also applied to the determination of H₂O₂ in commercial toothpastes with satisfactory results, indicating that Co_xNi_1−xFe₂O₄ is a promising hydrogen peroxidase mimics for the detection of H₂O₂.     

Multinuclear NMR studies on substituted derivatives of Rh6(CO)16 in solution

Multinuclear NMR data (¹³C, ³¹P, ¹³C–{³¹P}, ¹³C–{¹⁰³Rh} and ³¹P–{¹⁰³Rh}) for a series of mono- and di-substituted derivatives of Rh₆(CO)₁₆ containing neutral two electron donor ligands [Rh₆(CO)₁₅L, (L=NCMe, py, cyclooctene, PPh₃, P(OPh)₃,1/2(μ₂,η¹:η¹-dppe)); Rh₆(CO)₁₄(LL), (LL=cis-CH₂=CMe-CMe=CH₂, dppm, dppe, (P(OPh)₃)₂)] are reported; these data show that the solid state structure is maintained in solution. Detailed assignments of the ¹³CO NMR spectra of Rh₆(CO)₁₅(PPh₃) and Rh₆(CO)₁₄(dppm) clusters have been made on the basis ¹³C–{¹⁰³Rh} double resonance measurements and the specific stereochemical features of the observed long range couplings in these clusters have been studied. The stereochemical dependence of ³J(P–C) for terminal carbonyl ligands is discussed and the values of ³J(P–C) are found to be mainly dependent on the bond angles in the P–Rh–Rh–C fragment; these data enable the fine structure of the complex multiplets in the ¹³C–{¹H} and ³¹P–{¹H} NMR spectra of Rh₆(CO)₁₄ (dppm) to be simulated. Variable temperature ¹³C–{¹H} NMR measurements on Rh₆(CO)₁₅(PPh₃) reveal the carbonyl ligands in this complex to be fluxional. The fluxional process involves exchange of all the CO ligands except the two terminal CO's associated with the rhodium trans to the substituted rhodium and can be explained by a simple oscillation of the PPh₃ on the substituted rhodium atom aided by concomitant exchange of the unique terminal CO on this rhodium with adjacent μ₃-CO's.     

Reactions of the metallocene dichlorides [M(Cp)2Cl2] (M = Zr, Hf) and [Ti(MeCp)2Cl2] with the pyridine-2,6-dicarboxylate(−2) ligand: Synthesis, spectroscopic characterization and X-ray structures of the products

The reactivity pattern of the 16-electron species [M(Cp)₂Cl₂] (M = Zr, Hf; Cp⁻ = η⁵-C₅H₅⁻) and [Ti(MeCp)₂Cl₂] (MeCp⁻ = η⁵-C₅H₄CH₃⁻) towards the dipicolinate(−2) (dipic²⁻) ligand under mild (ambient temperature) and convenient (aerobic reactions, aqueous media) conditions have been investigated. The syntheses, molecular structures and spectroscopic (IR, ¹H NMR) characterization are reported for the 18-electron products [Zr(Cp)₂(dipic)] (1), [Hf(Cp)₂(dipic)] (2) and [Ti(MeCp)₂(dipic)] (3). The dipic²⁻ ion behaves as N,O,O′-chelating ligand in the three complexes, while the centroids of the Cp⁻ (1, 2) and MeCp⁻ (3) rings formally occupy the fourth and fifth coordination sites about the central metal. The two identical/very similar bite angles of only ∼70° make the dipic²⁻ ligand particularly suited to form stable metallocene derivatives with 5-coordinate geometry. IR and ¹H NMR data are discussed in terms of the known structures and the tridentate chelating mode of the dipic²⁻ ligand.     

Vacancy ordering and oxygen dynamics in oxide ion conducting La1−xSrxGa1−xMgxO3−x ceramics: Ga, Mg and O NMR

The oxygen vacancies distribution in the rigid lattice and the thermally activated motion of oxygen atoms are studied in La_1−xSr_xGa_1−xMg_xO_3−x (x=0.00; 0.05; 0.10; 0.15 and 0.20) compounds. For that ⁷¹Ga, ²⁵Mg and ¹⁷O NMR was performed from 100 K up to 670 K, and ion conductivity measurements were carried out up to 1273 K. The comparison of the electric field gradients at the Ga- and Mg-sites evidences that oxygen vacancies appear exclusively near gallium cations as a species trapped below room temperature in local clusters, GaO_5/2-□-GaO_5/2. These clusters decay at higher temperature into mobile constituents of the structural octahedra Ga(O_5/6□_1/6)_6/2. At the same time, the nearest octahedral oxygen environment of magnesium cations persists at different doping levels. The case of two adjacent vacant anion sites is found highly unlikely within the studied doping range. The thermally activated oxygen motion starts to develop above room temperature as is observed from both the motional narrowing of ¹⁷O NMR spectra and the ¹⁷O nuclear spin-lattice relaxation rate. The obtained results show that two types of motion exist, a slow motion and a fast one. The former is a long-range diffusion whereas the latter is a local back and forth oxygen jumps between two adjacent anion sites. These sites are strongly differentiated by the probability of the vacancy formation, like the vacant apical site and the occupied equatorial site in the orthorhombic compositions x <0.15.     

Synthesis and NMR spectroscopic investigation of salts containing the novel [Au(CF3)nX4−n] (n=4-1, X=F, CN, Cl) anions

First examples for the syntheses of trifluoromethyl transition metal complexes by conversion of a cyano into a trifluoromethyl ligand are described. The fluorination of [][Au(CN)₄] with ClF in CH₂Cl₂ leads to the formation of a mixture of gold complexes of the type [AuF_xCl_y(CF₃)_4−x−y]⁻ (x=0-4, y=0-2). Ligand exchange reactions of [AuF_xCl_y(CF₃)_4−x−y]⁻ (x=0-4, y=0-2) with (CH₃)₃SiY (Y=Cl, CN) are performed resulting in anions of the type [AuY_x(CF₃)_4−x]⁻ (x=0-4). All products are characterised by - and NMR spectroscopy.