Room-temperature fluorescence spectroscopy of monohydroxy metabolites of polycyclic aromatic hydrocarbons on octadecyl extraction membranes

Urine analysis of monohydroxy metabolites is recognized as an accurate assessment of human exposure to polycyclic aromatic hydrocarbons. Despite the sophisticated arsenal of analytical tools, monitoring of monohydroxy metabolites via simple, cost effective and direct methods of analysis still remains a challenge. This article evaluates the analytical potential of solid-phase extraction room-temperature fluorescence spectroscopy for the problem at hand. Extraction membranes serve the dual purpose of sample pre-concentration and solid substrate for RTF measurements. The potential of our proposition is demonstrated with the analysis of 2-hydroxy-fluorene, 1-hydroxy-pyrene, 3-hydroxy-benzo[a]pyrene and 9-hydroxy-phenanthrene in synthetic urine samples. Signal reproducibility is improved with the aid of a sample holder specifically designed for the manual optimization of luminescence signals. Background correction of solid substrates is carried out with the aid of Asymmetric Least Squares. Recovery values for the studied metabolites varied from 99.0 ± 1.2% (3-hydroxy-benzo[a]pyrene) to 99.9 ± 0.05% (1-hydroxy-pyrene). With only 10 mL of urine sample, the limits of detection varied from 57 pg mL⁻¹ (2-hydroxy-fluorene) to 2 pg mL⁻¹ (1-hydroxy-pyrene). Additional figures of merit include a simple experimental procedure for routine screening of numerous samples and compatibility with portable instrumentation for field analysis. Because of the non-destructive nature of fluorescence measurements, membranes can be brought to the lab for subsequent elution and confirmation of compounds via high-resolution techniques.     

交替三线性分解算法用于水杨酸和2,5-二羟基苯甲酸的荧光法同时测定

水杨酸 (SA)、2 ,5 二羟基苯甲酸 (GA)和对 氨基苯甲酸 (PABA)的荧光光谱相互重叠。用交替三线性分解二阶校正法对PABA共存下的SA和GA进行了同时荧光测定 ,SA和GA的回收率分别为 (1 0 1 2± 1 9) %和 (97 1 6±1 0 4 ) %。     

Determination of atenolol in human urine by emission-excitation fluorescence matrices and unfolded partial least-squares with residual bilinearization

A second-order multivariate calibration method based on a combination of unfolded partial least-squares (U-PLS) with residual bilinearization (RBL) has been applied to second-order data obtained from excitation-emission fluorescence matrices for determining atenolol in human urine, even in the presence of background interactions and fluorescence inner filter effects, which are both sample dependent. Atenolol is a cardioselective beta-blocker, which is considered a doping agent in shoot practice, so that its determination in urine can be required for monitoring the drug. Loss of trilinearity due to analyte-background interactions which may vary between samples, as well as inner filter effects, precludes the use of methods like parallel factor analysis (PARAFAC) that cannot handle trilinearity deviations, and justifies the employment of U-PLS. Successful analysis required to include the background in the calibration set. Unexpected components appear in new urine samples, different from those used in calibration set, requiring the second-order advantage which is obtained from a separate procedure known as residual bilinearization (RBL). Satisfactory results were obtained for artificially spiked urines, and also for real urine samples. They were statistically compared with those obtained applying a reference method based on high-performance liquid chromatography (HPLC).     

Simultaneous determination of naphazoline and pyridoxine in eye drops using excitation–emission matrix fluorescence coupled with second-order calibration method based on alternating trilinear decomposition algorithm

A novel method is developed for the direct determination of naphazoline hydrochloride(NAP) and pyridoxine hydrochloride(VB6) in commercial eye drops. By using excitation–emission matrix(EEM)fluorescence coupled with second-order calibration method based on the alternating trilinear decomposition(ATLD) algorithm, the proposed approach can achieve quantitative analysis successfully even in the presence of unknown and uncalibrated interferences. The method shows good linearity for NAP and VB6 with correlation coefficients greater than 0.99. The results were in good agreement with the labeled contents. To further confirm the feasibility and reliability of the proposed method, the same batch samples were analyzed by multiple reaction monitoring(MRM) based on LC–MS/MS method.T-test demonstrated that there are no significant differences between the prediction results of the two methods. The satisfactory results obtained in this work indicate that the use of the second-order calibration method coupled with the EEM is a promising tool for industrial quality control and pharmaceutical analysis due to its advantages of high sensitivity, low-cost and simple implementation.     

Development of an improved analytical method for the determination of carcinogenic polycyclic aromatic hydrocarbons in transformer oil

Polynuclear aromatic hydrocarbons (PAHs) are natural constituents of transformer oils and are essential in prolonging transformer in-service lifetime. Issues concerning PAH carcinogenicity demand methods that provide qualitative and quantitative information on the PAH composition of new and in-service oils to allow informed operational decisions to be made. However, current analytical methods focus on PAH fingerprinting, as opposed to quantitative analysis and are also cumbersome, relying on the use of large (>100 ml) volumes of organic solvents, some of which are hazardous. This paper reports a method for the improved quantification of carcinogenic PAHs in transformer oils that is both simple and repeatable. The method uses commercially available solid-phase extraction columns and millilitre volumes of relatively non-hazardous solvents. Extraction efficiencies of > or =74% were obtained for the Environmental Protection Agency priority PAHs. The method has potential for automation and high-throughput analysis and thus is of interest to industries that use transformer oils.     

Admicelle-enhanced synchronous fluorescence spectrometry for the selective determination of polycyclic aromatic hydrocarbons in water

A simple and rapid method for the highly sensitive determination of polycyclic aromatic hydrocarbons (PAHs) in water was developed. Benzo[a]pyrene, benzo[k]fluoranthene, perylene, and pyrene in water were concentrated into sodium dodecyl sulfate (SDS)-alumina admicelles. The collection was performed by adding SDS and alumina particles into the sample solution at pH 2. After gentle mixing, the resulting suspension was passed through a membrane filter to collect the SDS admicelles containing highly concentrated PAHs. The filter was placed on a slide glass and then covered admicellar layer with a fused silica glass plate before setting in a fluorescence spectrometer. Benzo[a]pyrene, benzo[k]fluoranthene, perylene, and pyrene were selectively determined by the synchronous fluorescence scan (SFS) analysis with keeping wavelength intervals between excitation and emission to 98, 35, 29, and 45 nm, respectively. Because of the minimum spectral overlapping, 1-40 ng l⁻¹ of benzo[a]pyrene, benzo[k]fluoranthene, and perylene as well as 10-150 ng l⁻¹ of pyrene were selectively determined with eliminating the interferences of other 12 PAHs. The detection limits were 0.3 ng l⁻¹ for benzo[a]pyrene, benzo[k]fluoranthene, and perylene, and 1 ng l⁻¹ for pyrene. They were 2-3 orders of magnitude lower than the detection limits in normal aqueous micellar solutions. The application to water analysis was studied.     

Second-order multivariate calibration procedures applied to high-performance liquid chromatography coupled to fast-scanning fluorescence detection for the determination of fluoroquinolones

Different second-order multivariate calibration algorithms, namely parallel factor analysis (PARAFAC), N-dimensional partial least-squares (N-PLS) and multivariate curve resolution-alternating least-squares (MCR-ALS) have been compared for the analysis of four fluoroquinolones in aqueous solutions, including some human urine samples (additional four fluoroquinolones were simultaneously determined by univariate calibration). Data were measured in a short time with a chromatographic system operating in the isocratic mode. The detection system consisted of a fast-scanning spectrofluorimeter, which allows one to obtain second-order data matrices containing the fluorescence intensity as a function of retention time and emission wavelength. The developed approach enabled us to determine eight analytes, some of them with overlapped profiles, without the necessity of applying an elution gradient, and thus significantly reducing both the experimental time and complexity. The study was employed for the discussion of the scopes of the applied second-order chemometric tools. The quality of the proposed technique coupled to each of the evaluated algorithms was assessed on the basis of the figures of merit for the determination of fluoroquinolones in the analyzed water and urine samples. Univariate calibration of four analytes led to limits of detection in the range 20–40 ng mL⁻¹ and root mean square errors for the validation samples in the range 30–60 ng mL⁻¹ (corresponding to relative prediction errors of 3–8%). The ranges for second-order multivariate calibration (using PARAFAC and N-PLS) of the remaining four analytes were: limit of detection, 2–8 ng mL⁻¹, root mean square errors, 3–50 ng mL⁻¹ and relative prediction errors, 1–5%.     

Micellar microwave-assisted extraction combined with solid-phase microextraction for the determination of polycyclic aromatic hydrocarbons in a certified marine sediment

A method for the determination of polycyclic aromatic hydrocarbons (PAHs) in marine sediments using microwave-assisted extraction with a micellar medium combined with solid-phase microextraction (SPME) and gas chromatography-mass spectrometry (GC-MS) has been developed. Two kinds of SPME fibers (100 μm polydimethylsiloxane and 85 μm polyacrylate) and different micellar media were compared for the extraction efficiency of the 16 EPA priority PAHs. The polyacrylate fiber with a micellar medium of polyoxyethylene-10-laurylether provides the highest extraction efficiency. The method is remarkable for presenting lower equilibrium times and considerably higher reproducibilities than the obtained in aqueous medium. The LODs obtained ranged between 0.28 ng/ml for fluorene and 7.66 ng/ml for indeno[1,2,3-cd]pyrene. The method has been applied to the determination of PAHs in a certified marine sediment (SRM 1941a), obtaining recoveries between 58.6 and 111.5% for three- to five-ring PAHs with precision close to or lower than the certified values.     

Magnetic solid-phase extraction based on octadecyl functionalization of monodisperse magnetic ferrite microspheres for the determination of polycyclic aromatic hydrocarbons in aqueous samples coupled with gas chromatography-mass spectrometry

Monodisperse magnetic C₁₈ microspheres were prepared based on the three-step reactions of solvothermal reduction, silanization and alkylation. The microspheres are of uniform sizes in the range of 200-260 nm. The structure of synthesized magnetic C₁₈ microspheres was studied by transmission electron microscopy, scanning electron microscopy, X-ray diffraction patterns, element analysis and vibrating sample magnetometry. This material has a high magnetic saturation value of 59 emu g⁻¹ and is easy to manipulate under a magnet. The prepared material was used for the preconcentration of the polycyclic aromatic hydrocarbon in water. The effects of desorption solvent and the amount of adsorbent on the preconcentration were also investigated. The results showed that the developed method was beneficial for the preconcentration of PAHs of middle molecular weight.     

Simultaneous analysis of the photocatalytic degradation of polycyclic aromatic hydrocarbons using three-dimensional excitation-emission matrix fluorescence and parallel factor analysis

Polycyclic aromatic hydrocarbons (PAHs) may be photochemically degraded. Monitoring of degradation process of PAHs is carried out by traditional methods, which normally imply time-consuming procedures that do not allow the chemical process to be analyzed in real time. In the present study, photodegradation kinetics of dibenz[a,h]anthracene, benz[a]anthracene, benz[a]pyrene and benz[k]fluorantene were investigated in aqueous solutions under different conditions. A 2³ factorial design was used for optimizing the degradation process.Fluorescence spectroscopy is a fast, cheap and sensitive analytical method, attractive for use in conjunction with chemometric methods; in this case three-way analytical methodology based on fluorescence excitation-emission matrix (EEM) and parallel factor analysis (PARAFAC) was employed. A four-factor PARAFAC model made it possible to resolve the species presents in the degradation mixture and quantify the relative concentration of the analytes throughout the degradation. Several different parameters, such as core consistency, percentage of fit and correlation coefficients between recovered and reference spectra were employed to determine the suitable number of factors for the PARAFAC model. This new methodology allows us to determine satisfactorily the PAHs concentration during the photodegradation in mixtures of arbitrary composition, representing an interesting alternative to the conventional techniques normally used for the monitoring of degradation reactions.     

Three-way partial least-squares regression for the simultaneous kinetic-enzymatic determination of xanthine and hypoxanthine in human urine

The performance of three-way principal component analysis and three-way partial least-squares regression when applied to a complex kinetic-enzymatic system is studied, in order to investigate the analytical potential of the combined use of these chemometric technologies for non-selective enzymatic systems. A enzymatic-kinetic procedure for the simultaneous determination of hypoxanthine and xanthine in spiked samples of human urine is proposed. The chemical system involves two consecutive reactions catalyzed by xanthine oxidase (EC 1.17.3.2). This enzyme catalyzes the oxidation of hypoxanthine, first to xanthine and then to uric acid, a competitive inhibitor of the reactions. The influence of uric acid during quantitative determination was considered in the design of the calibration set. The sample and enzyme solution were mixed in a stopped-flow module and the reaction was monitored using a diode array spectrophotometer. The recorded data have an intrinsical three-component structure (samples, time and wavelength). This data array was studied via three-way principal component analysis and was modeled for quantitative purposes using a three-way partial least-squares calibration procedure. Results are compared with those obtained by applying classical bilinear PLS to the previously unfolded data matrix.     

Different strategies for the direct determination of amoxicillin in human urine by second-order multivariate analysis of kinetic-spectrophotometric data

The kinetic evolution of UV-visible absorption spectra of amoxicillin in the presence of copper(II) ions has been processed by the second-order multivariate methods parallel factor analysis (PARAFAC) and also by a novel approach based on partial least-squares with residual bilinearization (PLS/RBL). The latter one is employed for the first time to evaluate kinetic-spectral information. The mechanism of the analyte metal-catalyzed hydrolysis involves a reaction intermediate and a final reaction product, both with spectra which may allow for the determination of amoxicillin in human urine, even in the presence of unsuspected sample components. This is possible thanks to the second-order advantage exploited by the employed chemometric algorithms, among which PARAFAC and PLS/RBL gave the best results. Amoxicillin was determined in a series of spiked and real urine samples, which allowed to perform, respectively, a recovery study and a comparison with the reference high-performance liquid chromatographic technique. The best figures of merit were obtained with PLS/RBL, namely sensitivity, 0.5 AU L mg⁻¹ (AU = absorbance units), analytical sensitivity, 500 L mg⁻¹ and limit of detection, 6 mg L⁻¹. Relative advantages and disadvantages of the employed algorithms are discussed.     

Triacontyl modified silica gel as a sorbent for the preconcentration of polycyclic aromatic hydrocarbons in aqueous samples prior to gas chromatographic-mass spectrometry determination

<正>Triacontyl modified silica gel as a sorbent coupled with gas chromatography-mass spectrometry(GC-MS) was developed to determine EPA prior 16 polycyclic aromatic hydrocarbons(PAHs) in water samples.Various parameters of solid-phase extraction such as organic modifier solvent,eluent,sample flow rate and volume were optimized.The developed method was found to yield a linear calibration curve in the concentration range of 0.05-8μg/L with respect to naphthalene,acenaphthylene,acenaphthene and 0.01-8μg/L for dibenz[a,h]anthracene and 0.05-14μg/L for fluorene,phenanthrene,anthracene and 0.01-14μg/L for the rest of analytes.Furthermore,the good accuracy and repeatability of the method made sure the requirements for achieving reliable analysis of PAHs in the environmental water samples,and the recoveries of optimal method were in the range of 80-120%except to higher volatility PAHs.C_(30)-bonded silica was proved to be an efficient sorbent for extraction of high molecular weight PAHs.     

Flocculation-ultrasonic assisted extraction and solid phase clean-up for determination of polycyclic aromatic hydrocarbons in water rich in colloidal particulate with high performance liquid chromatography and ultraviolet-fluorescence detection

In the present work, a simple method of sample preparation for the determination of polycyclic aromatic hydrocarbons (PAHs) in water rich in colloidal particulate was developed. The technique was mainly based on the effect of the flocculation of aluminum sulfate and the adsorption of the flocculation aid florisil. The method contained three steps: flocculation, ultrasonic extraction, and solid-phase extraction cleanup. Major parameters of the procedure were optimized with high performance liquid chromatography (HPLC) separation and ultraviolet-fluorescence detection. When 250 mL model sample containing 16 EPA PAHs was processed, the developed method provided detection limits in the range of 0.02–5 ng/L. Both spiked and non-spiked polluted river water samples rich in suspended particles and organic matters were analyzed. Recoveries and relative standard deviations for the 16 PAHs were in ranges of 86–94% and 3–13% (n = 5), respectively.     

Analytical evaluation of BEA zeolite for the pre-concentration of polycyclic aromatic hydrocarbons and their subsequent chromatographic analysis in water samples

The analytical performance of BEA – a commercial zeolite – is evaluated for the pre-concentration of fifteen Environmental Protection Agency – polycyclic aromatic hydrocarbons and their subsequent HPLC analysis in tap and lake water samples. The pre-concentration factors obtained with BEA have led to a method with excellent analytical figures of merit. One milliliter aliquots were sufficient to obtain excellent precision of measurements at the parts-per-trillion concentration level with relative standard deviations varying from 4.1% (dibenzo[a,h]anthracene) to 13.4% (pyrene). The limits of detection were excellent as well and varied between 1.1 (anthracene) and 49.9 ng L⁻¹ (indeno[1,2,3-cd]pyrene). The recovery values of all the studied compounds meet the criterion for regulated polycyclic aromatic hydrocarbons, which mandates relative standard deviations equal or lower than 25%. The small volume of organic solvents (100 μL per sample) and amount of BEA (2 mg per sample) makes sample pre-concentration environmentally friendly and cost effective. The extraction procedure is well suited for numerous samples as the small working volume (1 mL) facilitates the implementation of simultaneous sample extraction. These are attractive features when routine monitoring of numerous samples is contemplated.     

Molecularly imprinted solid-phase extraction for the selective determination of bromhexine in human serum and urine with high performance liquid chromatography

In this work, a novel method is described for the determination of bromhexine in biological fluids using molecularly imprinted solid-phase extraction as the sample cleanup technique combined with high performance liquid chromatography (HPLC). The water-compatible molecularly imprinted polymers (MIPs) were prepared using methacrylic acid as functional monomer, ethylene glycol dimethacrylate as cross-linker, chloroform as porogen and bromhexine as the template molecule. The novel imprinted polymer was used as a solid-phase extraction sorbent for the extraction of bromhexine from human serum and urine. Various parameters affecting the extraction efficiency of the polymer have been evaluated. The optimal conditions for molecularly imprinted solid-phase extraction (MISPE) consisted of conditioning 1 mL methanol and 1 mL of deionized water at neutral pH, loading of 5 mL of the water sample (25 μg L⁻¹) at pH 6.0, washing using 2 mL acetonitrile/acetone (1/4, v/v) and elution with 3× 1 mL methanol/acetic acid (10/1, v/v). The MIP selectivity was evaluated by checking several substances with similar molecular structures to that of bromhexine. Results from the HPLC analyses showed that the calibration curve of bromhexine using MIP from human serum and urine is linear in the ranges of 0.5-100 and 1.5-100 μg L⁻¹ with good precisions (3.3% and 2.8% for 5.0 μg L⁻¹), respectively. The recoveries for serum and urine samples were higher than 92%.     

Strategies for the extraction of free and bound polycyclic aromatic hydrocarbons in run-off waters rich in organic matter

The objective of this study was to optimize and characterise extraction methods to examine the effects of wood ash application on polycyclic aromatic hydrocarbons (PAHs) concentrations in run-off waters for the evaluation of their distribution by storage in the different compartments (free and bound to dissolved organic matter, DOM), what influence their stability and persistence. The feasibility of solid phase extraction (SPE) and stir bar sorptive extraction (SBSE) for the determination of eight PAHs in run-off water samples has been evaluated. Both are appropriate to determine PAHs in run-off waters, but SPE is suitable for the determination of overall PAHs, while SBSE is used for the determination of free PAHs. The combination of both extraction techniques can then be used to estimate PAHs bound to DOM. Another approach based in the only use of SBSE is proposed for the estimation of all PAHs fractions (free, bound to DOM, and overall), once we are able to estimate the fraction percentage the free concentration represents. The percentage of free fraction was variable in the run-off waters with medium levels of DOM depending on the number of aromatic rings, molecular weight and water solubility of PAHs.     

Sample preparation of sewage sludge and soil samples for the determination of polycyclic aromatic hydrocarbons based on one-pot microwave-assisted saponification and extraction

A microwave-assisted sample preparation (MASP) procedure was developed for the analysis of polycyclic aromatic hydrocarbons (PAHs) in sewage sludge and soil samples. The procedure involved the simultaneous microwave-assisted extraction of PAHs with n-hexane and the hydrolysis of samples with methanolic potassium hydroxide. Because of the complex nature of the samples, the extracts were submitted to further cleaning with silica and Florisil solid-phase extraction cartridges connected in series. Naphthalene, acenaphthene, fluorene, phenanthrene, anthracene, fluoranthene, pyrene, benz[a]anthracene, chrysene, benzo[e]pyrene, benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene, dibenz[a,h]anthracene, benzo[g,h,i]perylene, and indeno[1,2,3-cd]pyrene, were considered in the study. Quantification limits obtained for all of these compounds (between 0.4 and 14.8 μg kg⁻¹ dry mass) were well below of the limits recommended in the USA and EU. Overall recovery values ranged from 60 to 100%, with most losses being due to evaporation in the solvent exchange stages of the procedure, although excellent extraction recoveries were obtained. Validation of the accuracy was carried out with BCR-088 (sewage sludge) and BCR-524 (contaminated industrial soil) reference materials.     

Preconcentration and fluorimetric determination of polycyclic aromatic hydrocarbons based on the acid-induced cloud-point extraction with sodium dodecylsulfate

The acid-induced cloud-point extraction (CPE) technique based on sodium dodecylsulfate (SDS) micelles has been used for preconcentration of ten representatives of polycyclic aromatic hydrocarbons (PAHs) for the following fluorescence determination. The effect of the acidity of solution, SDS and electrolyte concentrations, centrifugation time and rate on the two-phase separation process and extraction percentages of PAHs have systematically been examined. Extraction percentages have been obtained for all PAHs after CPE ranged from 67 to 93%. Pyrene was used as a fluorescent probe to monitor the micropolarity of the surfactant-rich phase compared with SDS micelles and this allows one to conclude that water content in micellar phase after CPE is reduced. The spectral, metrological and analytical characteristics of PAH fluorimetric determination after acid-based CPE with sodium dodecylsulfate are presented. Advantages provided by using CPE in combination with fluorimetric determination of PAHs are discussed. The determination of benz[a]pyrene in tap water is presented as an example.     

Validation of two analytical methods for the determination of ochratoxin A by reversed-phased high-performance liquid chromatography coupled to fluorescence detection in musts and sweet wines from Andalusia

Some Spanish sweet wines are made from raisins, grapes dried by direct exposure to the sun after picking. This drying process can encourage ochratoxin A (OTA) formation. OTA is a mycotoxin formed by several fungi. It has been linked to nephropathy in humans, and may have a long half-life in humans. The aim of this study is to develop and to apply two procedures for the analysis of OTA in grape musts (during the raisining process) and sweet wines, respectively. Reversed-phase high-performance liquid chromatography (RP-HPLC) coupled to fluorescence detection (FLD) was employed in both analytical methods. In grape must, the method involves the direct injection of the sample in a HPLC-FLD system without any kind of prior clean-up procedure. The complexity of the sweet wine samples requires a solid-phase extraction (SPE) clean-up on a C18 column which enables the OTA to be isolated from the matrix. The methods used were statistically validated. The validation also included the comparison of the slopes of the curve obtained with standards and the regression curves obtained by the addition of a standard. Two different studies of standard additions were conducted. One method was validated without sample preparation and it was applied to must samples. The other method was validated with SPE extraction and it was applied to sweet wine samples. Recovery was always better than 89.69%. The limit of detection (S/N = 3) and limit of quantification (S/N = 10) were established at 0.22 and 0.77 μg l⁻¹, respectively. In general, the analytical data obtained provided good results at the sub-μg l⁻¹ concentration level.