Fluorescence detection of mercury(II) and lead(II) ions using aptamer/reporter conjugates

We have developed a fluorescence technique for the detection of Hg²⁺ and Pb²⁺ ions using polythymine (T₃₃)/benzothiazolium-4-quinolinium dimer derivative (TOTO-3) and polyguanine (G₃₃)/terbium ions (Tb³⁺) conjugates, respectively. Hg²⁺ ions induce T₃₃ to form folded structures, leading to increased fluorescence of the T₃₃/TOTO-3 conjugates. Because Pb²⁺ ions compete with Tb³⁺ ions to form complexes with G₃₃, the extent of formation of the G₃₃-Tb³⁺ complexes decreases upon increasing the Pb²⁺ concentration, leading to decreased fluorescence at 545 nm when excited at 290 nm. To minimize interference from Hg²⁺ ions during the detection of Pb²⁺ ions, we conducted two-step fluorescence measurements; prior to addition of the G₃₃/Tb³⁺ probe, we recorded the fluorescence of a mixture of the T₃₃/TOTO-3 conjugates and Hg²⁺ ions. The fluorescence signal obtained was linear with respect to the Hg²⁺ concentration over the range 25.0-500 nM (R² = 0.99); for Pb²⁺ ions, it was linear over the range 3.0-50 nM (R² = 0.98). The limits of detection (at a signal-to-noise ratio of 3) for Hg²⁺ and Pb²⁺ ions were 10.0 and 1.0 nM, respectively. Relative to other techniques for the detection of Hg²⁺ and Pb²⁺ ions in soil and water samples, our present approach is simpler, faster, and more cost-effective.     

Aminoquinoline based highly sensitive fluorescent sensor for lead(II) and aluminum(III) and its application in live cell imaging

We have synthesized a new probe 5-((anthracen-9-ylmethylene) amino)quinolin-10-ol (ANQ) based on anthracene platform. The probe was tested for its sensing behavior toward heavy metal ions Hg²⁺, Pb²⁺, light metal Al³⁺ ion, alkali, alkaline earth, and transition metal ions by UV–visible and fluorescent techniques in ACN/H₂O mixture buffered with HEPES (pH 7.4). It shows high selectivity toward sensing Pb²⁺/Al³⁺ metal ions. Importantly, 10-fold and 5- fold fluorescence enhancement at 429 nm was observed for probe upon complexation with Pb²⁺ and Al³⁺ ions, respectively. This fluorescence enhancement is attributable to the prevention of photoinduced electron transfer. The photonic studies indicate that the probe can be adopted as a sensitive fluorescent chemosensor for Pb²⁺ and Al³⁺ ions.     

A label-free colorimetric detection of lead ions by controlling the ligand shells of gold nanoparticles

We have developed a simple, colorimetric and label-free gold nanoparticle (Au NP)-based probe for the detection of Pb²⁺ ions in aqueous solution, operating on the principle that Pb²⁺ ions change the ligand shell of thiosulfate (S₂O₃²⁻)-passivated Au NPs. Au NPs reacted with S₂O₃²⁻ ions in solution to form Au⁺·S₂O₃²⁻ ligand shells on the Au NP surfaces, thereby inhibiting the access of 4-mercaptobutanol (4-MB). Surface-assisted laser desorption/ionization time-of-flight ionization mass spectrometry (SALDI-TOF MS) and inductively coupled plasma mass spectrometry (ICP-MS) measurements revealed that PbAu alloys formed on the surfaces of the Au NPs in the presence of Pb²⁺ ions; these alloys weakened the stability of the Au⁺·S₂O₃²⁻ ligand shells, enhancing the access of 4-MB to the Au NP surfaces and, therefore, inducing their aggregation. As a result, the surface plasmon resonance (SPR) absorption of the Au NPs red-shifted and broadened, allowing quantitation of the Pb²⁺ ions in the aqueous solution. This 4-MB/S₂O₃²⁻-Au NP probe is highly sensitive (linear detection range: 0.5-10 nM) and selective (by at least 100-fold over other metal ions) toward Pb²⁺ ions. This cost-effective sensing system allows the rapid and simple determination of the concentrations of Pb²⁺ ions in real samples (in this case, river water, Montana soil and urine samples).     

Sensitive pseudobienzyme electrocatalytic DNA biosensor for mercury(II) ion by using the autonomously assembled hemin/G-quadruplex DNAzyme nanowires for signal amplification

Herein, a novel sensitive pseudobienzyme electrocatalytic DNA biosensor was proposed for mercury ion (Hg²⁺) detection by using autonomously assembled hemin/G-quadruplex DNAzyme nanowires for signal amplification. Thiol functionalized capture DNA was firstly immobilized on a nano-Au modified glass carbon electrode (GCE). In presence of Hg²⁺, the specific coordination between Hg²⁺ and T could result in the assembly of primer DNA on the electrode, which successfully triggered the HCR to form the hemin/G-quadruplex DNAzyme nanowires with substantial redox probe thionine (Thi). In the electrolyte of PBS containing NADH, the hemin/G-quadruplex nanowires firstly acted as an NADH oxidase to assist the concomitant formation of H₂O₂ in the presence of dissolved O₂. Then, with the redox probe Thi as electron mediator, the hemin/G-quadruplex nanowires acted as an HRP-mimicking DNAzyme that quickly bioelectrocatalyzed the reduction of produced H₂O₂, which finally led to a dramatically amplified electrochemical signal. This method has demonstrated a high sensitivity of Hg²⁺ detection with the dynamic concentration range spanning from 1.0 ng L⁻¹ to 10 mg L⁻¹ Hg²⁺ and a detection limit of 0.5 ng L⁻¹ (2.5 pM) at the 3S_blank level, and it also demonstrated excellent selectivity against other interferential metal ions.     

Multiplex sensor for detection of different metal ions based on on–off of fluorescent gold nanoclusters

In this study, a multiplex fluorescence sensor for successive detection of Fe³⁺, Cu²⁺ and Hg²⁺ ions based on “on–off” of fluorescence of a single type of gold nanoclusters (Au NCs) is described. Any of the Fe³⁺, Cu²⁺ and Hg²⁺ ions can cause quenching fluorescence of Au NCs, which established a sensitive sensor for detection of these ions respectively. With the introduction of ethylene diamine tetraacetic acid (EDTA) to the system of Au NCs and metal ions, a restoration of fluorescence may be found with the exception of Hg²⁺. A highly selective detection of Hg²⁺ ion is, thus, achieved by masking Fe³⁺ and Cu²⁺. On the other hand, the masking of Fe³⁺ and Cu²⁺ leads to the enhancement of fluorescence of Au NCs, which in turn provides an approach for successive determination of Fe³⁺ and Cu²⁺ based on “on–off” of fluorescence of Au NCs. Moreover, this assay was applied to the successful detection of Fe³⁺, Cu²⁺ and Hg²⁺ in fish, a good linear relationship was found between these metal ions and the degree of quenched fluorescent intensity. The dynamic ranges of Hg²⁺, Fe³⁺ and Cu²⁺ were 1.96 × 10⁻¹⁰–1.01 × 10⁻⁹, 1.28 × 10⁻⁷–1.27 × 10⁻⁶ and 1.2 × 10⁻⁷–1.2 × 10⁻⁶ M with high sensitivity (the limit of detection of Fe³⁺ 2.0 × 10⁻⁸ M, Cu²⁺ 1.9 × 10⁻⁸ M and Hg²⁺ 2 × 10⁻¹⁰ M). These results indicate that the assay is suitable for sensitive detection of these metal ions even under the coexistence, which can not only determine all three kinds of metal ions successively but also of detecting any or several kinds of metal ions.     

Fluorescence assay of catecholamines based on the inhibition of peroxidase-like activity of magnetite nanoparticles

We report a fluorescence approach for the highly selective and sensitive detection of catecholamines using magnetite nanoparticles (Fe₃O₄ NPs) in the presence of Amplex UltraRed (AUR) and H₂O₂. Fe₃O₄ NPs catalyze H₂O₂-mediated oxidation of AUR. The resulting product fluoresces (excitation/emission maxima, ca. 568/587 nm) more strongly, relative to AUR. When catecholamines bind to Fe₃O₄, the complexes that are formed induce decreased activity of Fe₃O₄ NPs, mediated through the coordination between Fe³⁺ on the NP surface and the catechol moiety of catecholamines. As a result, Fe₃O₄ NPs-catalyzed H₂O₂-mediated oxidation of AUR is inhibited by catecholamines. The limits of detection for dopamine (DA), l-DOPA, norepinephrine, and epinephrine were 3 nM, 3 nM, 3 nM, and 6 nM, respectively. The Fe₃O₄ NPs-H₂O₂-AUR probe exhibited high selectivity (>1000-fold) toward catecholamines over other tested biomolecules that commonly exist in urine. Four catecholamines had similar sensitivity because the inhibition of the Fe₃O₄ NPs activity relies on the presence of the catechol moiety. This approach also allowed the determination of tyrosinase activity because tyrosinase catalyzes the conversion of l-tyrosine to l-DOPA. We validated the practicality of the use of the Fe₃O₄ NPs-H₂O₂-AUR probe for the determination of the concentrations of DA in urine samples.     

Electrocatalytic assay of mercury(II) ions using a bifunctional oligonucleotide signal probe

Engineered nucleic acid probes containing recognition and signaling functions find growing interest in biosensor design. In this paper, we developed a novel electrochemical biosensor for sensitive and selective detecting of Hg²⁺ based on a bifunctional oligonucleotide signal probe combining a mercury-specific sequence and a G-quadruplex (G4) sequence. For constructing the electrochemical Hg²⁺ biosensor, a thiolated, mercury-specific oligonucleotide capture probe was first immobilized on gold electrode surface. In the presence of Hg²⁺, a bifunctional oligonucleotide signal probe was hybridized with the immobilized capture probe through thymine–mercury(II)–thymine interaction-mediated surface hybridization. The further interaction between G4 sequence of the signal probe and hemin generated a G4–hemin complex, which catalyzed the electrochemical reduction of hydrogen peroxide, producing amplified readout signals for Hg²⁺ interaction events. This electrochemical Hg²⁺ biosensor was highly sensitive and selective to Hg²⁺ in the concentration of 1.0 nM to 1 μM with a detection limit of 0.5 nM. The new design of bifunctional oligonucleotide signal probes also provides a potential alternative for developing simple and effective electrochemical biosensors capable of detecting other metal ions specific to natural or artificial bases.     

Label-free colorimetric sensor for mercury(II) and DNA on the basis of mercury(II) switched-on the oxidase-mimicking activity of silver nanoclusters

In this paper, a novel colorimetric biosensor for Hg²⁺ and DNA molecules is presented based on Hg²⁺ stimulated oxidase-like activity of bovine serum albumin protected silver clusters (BSA-Ag NCs). Under mild conditions, Hg²⁺ activated BSA-Ag NCs to show high catalytic activity toward the oxidation of 3,3′,5, 5′-tetramethylbenzidine (TMB) using ambient dissolved oxygen as an oxidant. The oxidase-like activity of BSA-Ag NCs was “switched-on” selectively in the presence of Hg²⁺, which permitted a novel and facile colorimetric sensor for Hg²⁺. As low as 25 nmol L⁻¹ Hg²⁺ could be detected with a linear range from 80 nmol L⁻¹ to 50 mmol L⁻¹. In addition, the sensing strategy was also employed to detect DNA molecules. Hg²⁺ is known to bind very strongly and specifically with two DNA thymine bases (T) to form thymine–Hg²⁺–thymine (T–Hg²⁺–T) base pairs. The hairpin-structure was disrupted and Hg²⁺ ions were released after hybridization with the DNA target. By coupling the Hg²⁺ switched-on the oxidase-mimicking activity of BSA-Ag NCs, we developed a novel label-free strategy for facile and fast colorimetric detection of DNA molecules. More important, target DNA can be detected as low as 10 nmol L⁻¹ with a linear range from 30 to 225 nmol L⁻¹. Compared with other methods, this method presents several advantages such as the independence of hydrogen peroxide, high sensitivity and good selectivity, avoiding any modification or immobilization of DNA, which holds a great potential of metal NCs for clinical application in biosensing and biotechnology.     

An acyclic,dansyl based colorimetric and fluorescent chemosensor for Hg(II) via twisted intramolecular charge transfer (TICT)

An efficient fluorescent chemosensor for Hg²⁺ ion, based on 5-(dimethylamino)-N-(2-mercaptophenyl)naphthalene-1-sulfonamide, has been developed. It exhibits Hg²⁺-selective on–off fluorescence quenching behavior via twisted intramolecular charge transfer (TICT) mechanism, which is rationalized by time dependent density functional theory (TD-DFT) calculations. The system exhibits visible color change from colorless to gray upon Hg²⁺ binding with very high selectivity and sensitivity (as low as 5.0 × 10⁻¹⁰ mol L⁻¹) over other metal ions such as K⁺, Na⁺, Ag⁺, Mn²⁺, Ca²⁺, Ba²⁺, Fe²⁺, Zn²⁺, Pb²⁺, Cu²⁺, Sn²⁺, Cd²⁺, Ni²⁺ and Co²⁺. The present sensing system is also successfully applied for the detection of Hg²⁺ ion in real samples.     

Determination of Hg on poly(vinylferrocenium) (PVF)-modified platinum electrode

A new surface based on poly(vinylferrocenium) (PVF⁺)-modified platinum electrode was developed for determination of Hg²⁺ ions in aqueous solutions. The polymer was electrodeposited on platinum electrode by constant potential electrolysis as PVF⁺ClO₄⁻. Cl⁻ ions were then attached to the polymer matrix by anion exchange and the modified electrode was dipped into Hg²⁺ solution. Hg²⁺ was preconcentrated at the polymer matrix by adsorption and also complexation reaction with Cl⁻. Detection of Hg²⁺ was carried out by differential pulse anodic stripping voltammetry (DPASV) after reduction of Hg²⁺. Mercury ions as low as 5 × 10⁻¹⁰ M could be detected with the prepared electrode and the relative standard deviation was calculated as 6.35% at 1 × 10⁻⁶ M concentration (n = 6). Interferences of Ag⁺, Pb²⁺ and Fe³⁺ ions were also studied at two different concentration ratios with respect to Hg²⁺. The developed electrode was applied to the determination of Hg²⁺ in water samples.     

A sensitive fluorescence anisotropy method for detection of lead (II) ion by a G-quadruplex-inducible DNA aptamer

Sensitive and selective detection of Pb²⁺ is of great importance to both human health and environmental protection. Here we propose a novel fluorescence anisotropy (FA) approach for sensing Pb²⁺ in homogeneous solution by a G-rich thrombin binding aptamer (TBA). The TBA labeled with 6-carboxytetramethylrhodamine (TMR) at the seventh thymine nucleotide was used as a fluorescent probe for signaling Pb²⁺. It was found that the aptamer probe had a high FA in the absence of Pb²⁺. This is because the rotation of TMR is restricted by intramolecular interaction with the adjacent guanine bases, which results in photoinduced electron transfer (PET). When the aptamer probe binds to Pb²⁺ to form G-quadruplex, the intramolecular interaction should be eliminated, resulting in faster rotation of the fluorophore TMR in solution. Therefore, FA of aptamer probe is expected to decrease significantly upon binding to Pb²⁺. Indeed, we observed a decrease in FA of aptamer probe upon Pb²⁺ binding. Circular dichroism, fluorescence spectra, and fluorescence lifetime measurement were used to verify the reliability and reasonability of the sensing mechanism. By monitoring the FA change of the aptamer probe, we were able to real-time detect binding between the TBA probe and Pb²⁺. Moreover, the aptamer probe was exploited as a recognition element for quantification of Pb²⁺ in homogeneous solution. The change in FA showed a linear response to Pb²⁺ from 10 nM to 2.0 μM, with 1.0 nM limit of detection. In addition, this sensing system exhibited good selectivity for Pb²⁺ over other metal ions. The method is simple, quick and inherits the advantages of aptamer and FA.     

Preparation and metal binding behavior of poly(4-vinylbenzyl 2-hydroxyethyl) sulfoxide and sulfone

In order to explore the reuse properties of oxidized chelating resin containing sulfur after adsorption, two kinds of novel chelating resins, poly[4-vinylbenzyl-(2-hydroxyethyl)] sulfoxide (PVBSO) and poly[4-vinylbenzyl-(2-hydroxyethyl)] sulfone (PVBSO₂), were synthesized using poly[4-vinylbenzyl-(2-hydroxyethyl)] sulfide (PVBS) as material. Their structures were confirmed by FTIR and XPS. The adsorption properties and mechanism for metal ions such as Au³⁺, Pt⁴⁺, Pd²⁺, Hg²⁺, Cu²⁺, Ni²⁺, Fe³⁺, Pb²⁺, Cd²⁺, and Zn²⁺ were investigated. Experimental results showed that PVBSO had good adsorption and selective properties for Au³⁺, Pd²⁺ and Cu²⁺ when the coexisting ion was Pt⁴⁺, Ni²⁺, Pb²⁺ or Cd²⁺. In the aqueous system containing Cu²⁺ and Pb²⁺ or Cu²⁺ and Cd²⁺, PVBSO₂ only adsorbed Cu²⁺. The selective coefficients of PVBSO and PVBSO₂ were α_Au/Pt = 4.8, α_Au/Pd = 11.8, α_Pd/Pt = 10.9, α_Cu/Ni = 2.5, α_Cu/Cd = 41.2, α_Cu/Pb = ∞, α_Cu/Ni = 3.0, α_Cu/Cd = ∞, α_Cu/Pb = ∞, respectively.     

A fluorescence reagent for the highly selective recognition and separation of lead ion (II) from aqueous solutions

A new fluorescence reagent, N,N-bi[4(1-pyrene)-butyroyl]-lysine (1) was synthesized. The new fluorescence sensor showed high sensitivity (detection limit up to 20.7 μg L⁻¹) and specific selectivity for Pb²⁺ over other metal ions examined in aqueous solutions. It could also be used to remove Pb²⁺ from aqueous solutions by filtering the insoluble 1–Pb²⁺ complex with sufficient reversibility.     

Dilead(II) trimercury(II) tetraoxide chromate(VI), Pb2(Hg3O4)(CrO4)

Pb₂(Hg₃O₄)(CrO₄) consists of [CrO₄]²⁻ tetra­hedra, linear O—Hg—O dumbbells and divalent Pb atoms in [3+5]‐coordination. The HgO₂ dumbbells are condensed into [Hg₃O₄]²⁻ units and can be regarded as a section of the HgO structure. The [Hg₃O₄]²⁻ complex anions are connected by inter­stitial Pb²⁺ ions, while the [CrO₄]²⁻ tetra­hedra are isolated.     

Development of silver/gold nanocages onto indium tin oxide glass as a reagentless plasmonic mercury sensor

We demonstrate the utilization of silver/gold nanocages (Ag/Au NCs) deposited onto transparent indium tin oxide (ITO) film glass as the basis of a reagentless, simple and inexpensive mercury probe. The localized surface plasmon resonance (LSPR) peak wavelength was located at ∼800 nm. By utilizing the redox reaction between Hg²⁺ ions and Ag atoms that existed in Ag/Au NCs, the LSPR peak of Ag/Au NCs was blue-shifted. Thus, we develop an optical sensing probe for the detection of Hg²⁺ ions. The LSPR peak changes were lineally proportional to the concentration of Hg²⁺ ions over the range from 10 ppb to 0.5 ppm. The detection limit was ∼5 ppb. This plasmonic probe shows good selectivity and high sensitivity. The proposed optical probe is successfully applied to the sensing of Hg²⁺ in real samples.     

Ultrasensitive mercury(II) ion detection by europium(III)-doped cadmium sulfide composite nanoparticles

With the biomolecule glutathione (GSH) as a capping ligand, Eu³⁺-doped cadmium sulfide composite nanoparticles were successfully synthesized through a straightforward one-pot process. An efficient fluorescence energy transfer system with CdS nanoparticles as energy donor and Eu³⁺ ions as energy accepter was developed. As a result of specific interaction, the fluorescence intensity of Eu³⁺-doped CdS nanoparticles is obviously reduced in the presence of Hg²⁺. Moreover, the long fluorescent lifetime and large Stoke's shift of europium complex permit sensitive fluorescence detection. Under the optimal conditions, the fluorescence intensity of Eu³⁺ at 614 nm decreased linearly with the concentration of Hg²⁺ ranging from 10 nmol L⁻¹ to 1500 nmol L⁻¹, the limit of detection for Hg²⁺ was 0.25 nmol L⁻¹. In addition to high stability and reproducibility, the composite nanoparticles show a unique selectivity towards Hg²⁺ ion with respect to common coexisting cations. Moreover, the developed method was applied to the detection of trace Hg²⁺ in aqueous solutions. The probable mechanism of reaction between Eu³⁺-doped CdS composite nanoparticles and Hg²⁺ was also discussed.     

A ratiometric electrochemical biosensor for sensitive detection of Hg based on thymine–Hg–thymine structure

In this paper, a simple, selective and reusable electrochemical biosensor for the sensitive detection of mercury ions (Hg²⁺) has been developed based on thymine (T)-rich stem–loop (hairpin) DNA probe and a dual-signaling electrochemical ratiometric strategy. The assay strategy includes both “signal-on” and “signal-off” elements. The thiolated methylene blue (MB)-modified T-rich hairpin DNA capture probe (MB-P) firstly self-assembled on the gold electrode surface via Au–S bond. In the presence of Hg²⁺, the ferrocene (Fc)-labeled T-rich DNA probe (Fc-P) hybridized with MB-P via the Hg²⁺-mediated coordination of T–Hg²⁺–T base pairs. As a result, the hairpin MB-P was opened, the MB tags were away from the gold electrode surface and the Fc tags closed to the gold electrode surface. These conformation changes led to the decrease of the oxidation peak current of MB (I_MB), accompanied with the increase of that of Fc (I_Fc). The logarithmic value of I_Fc/I_MB is linear with the logarithm of Hg²⁺ concentration in the range from 0.5 nM to 5000 nM, and the detection limit of 0.08 nM is much lower than 10 nM (the US Environmental Protection Agency (EPA) limit of Hg²⁺ in drinking water). What is more, the developed DNA-based electrochemical biosensor could be regenerated by adding cysteine and Mg²⁺. This strategy provides a simple and rapid approach for the detection of Hg²⁺, and has promising application in the detection of Hg²⁺ in real environmental samples.     

Vanillin-coumarin hybrid molecule as an efficient fluorescent probe for trace level determination of Hg(II) and its application in cell imaging

An efficient Hg²⁺ selective fluorescent probe (vanillin azo coumarin, VAC) was synthesized by blending vanillin with coumarin. VAC and its Hg²⁺ complex were well characterized by different spectroscopic techniques like ¹H NMR, QTOF-MS ES⁺, FTIR and elemental analysis as well. VAC could detect up to 1.25 μM Hg²⁺ in aqueous methanol solution through fluorescence enhancement. The method was linear up to 16 μM of Hg²⁺. Negative interferences from Cu²⁺, Ni²⁺, Fe³⁺, and Zn²⁺ were eliminated using EDTA as a masking agent. VAC showed a strong binding to Hg²⁺ ion as evident from its binding constant value (2.2 × 10⁵), estimated using Benesi-Hildebrand equation. Mercuration assisted restricted rotation of the vanillin moiety and inhibited photoinduced electron transfer from the O, N-donor sites to the coumarin unit are responsible for the enhancement of fluorescence upon mercuration of VAC. VAC was used for imaging the accumulation of Hg²⁺ ions in Candida albicans cells.     

Exploring the interactions between gold nanoparticles and analytes through surface‐assisted laser desorption/ionization mass spectrometry

Surface‐assisted laser desorption/ionization mass spectrometry (SALDI‐MS) is applied to provide strong evidence for the chemical reactions of functionalized gold nanoparticles (Au NPs) with analytes – Hg²⁺ ions induced MPA?Au NPs aggregation in the presence of 2,6‐pyridinedicarboxylic acid (PDCA) and H₂O₂ induced fluorescence quenching of 11‐MUA?Au NDs. PDCA‐Hg²⁺‐MPA coordination is responsible for Au NPs aggregation, while the formation of 11‐MUA disulfide compounds that release into the bulk solution is responsible for H₂O₂‐induced fluorescence quenching. In addition to providing information about the chemical structures, SALDI‐MS is also selective and sensitive for the detection of Hg²⁺ ions and H₂O₂. The limits of detection (LODs) for Hg²⁺ ions and H₂O₂ by SALDI‐MS were 300 nM and 250 µM, respectively. The spot‐to‐spot variations in the two studies were both less than 18% (50 sample spots). Our results reveal that SALDI‐MS can be used to study analyte‐induced changes in the surface properties of nanoparticles. Copyright © 2010 John Wiley & Sons, Ltd.