Comparison of storage stability of odorous VOCs in polyester aluminum and polyvinyl fluoride Tedlar bags

Whole air sampling using containers such as flexible bags or rigid canisters is commonly used to collect samples of volatile organic compounds (VOC) in air. The objective of this study was to compare the stability of polyester aluminum (PEA) and polyvinyl fluoride (PVF, brand name Tedlar^®) bags for gaseous VOC sampling. Eight VOC standards (benzene, toluene, p-xylene, styrene, methyl ethyl ketone, methyl isobutyl ketone, butyl acetate, and isobutyl alcohol) were placed into each bag at storage times of 0, 2, and 3 days prior to analyses by gas chromatography/mass spectrometry (GC/MS). From each bag representing each storage day, samples of 3 different mass loadings were withdrawn and analyzed to derive response factors (RF) of each chemical between the slope of the GC response (y-axis) vs. loaded mass (x-axis). The relative recoveries (RR) of VOC, if derived by dividing RF value of a given storage day by that of 0 day, varied by time, bag type, and VOC type. If the RR values after three days are compared, those of methyl isobutyl ketone were the highest with 96 (PVF) and 99% (PEA); however, the results of isobutyl alcohol were highly contrasting between the two bags with 31 and 94%, respectively. Differences in RR values between the two bag types increased with storage time, such that RR of PEA bags (88 ± 10%) were superior to those of PVF bags (73 ± 22%) after three days, demonstrating that VOC in PEA bags were more stable than in PVF bags.     

Monitoring of Atmospheric Sulfur Dioxide by Fluorescence Monitoring System

A fluorescence monitoring system was used to measure gaseous sulfur dioxide at Taoyuan Agricultural Farm. A gas-diluting system and gas chromatograph equipped with a sulfur chemiluminescence detector used to audit the accuracy of diluted sulfur dioxide are described. The accuracy was ?8% and ?2%, respectively, for the preparation of 10 and 50 ppb SO₂ standard gas. The pattern of variation of SO₂ concentration at Taoyuan Agricultural Farm is reported. In summer at Taoyuan Agricultural Farm, the concentration of SO₂ varied with a pattern of night concentration (15-20 ppb) greater than that in the afternoon (0–2 ppb). Computer-analyzed wind trajectories in Taiwan for this pattern are reported.     

Experimental approach to assess sorptive loss properties of volatile organic compounds in the sampling bag system

In this study, the sorptive loss patterns for volatile organic compounds were evaluated by gaseous standards containing 13 compounds (benzene, toluene, styrene, p‐xylene, methyl ethyl ketone, methyl isobutyl ketone, isobutyl alcohol, butyl acetate, acetaldehyde, propionaldehyde, butyraldehyde, isovaleraldehyde, and valeraldehyde). The gaseous standards, prepared initially at two contrasting concentration levels (40 and 4000 ppb) in a polyester aluminum bag, were measured after two consecutive transfers into empty bags. It indicates that the percent loss patterns, if assessed for all 13 target compounds, are affected most sensitively by the initial concentration levels of samples to yield 2.62 ± 2.22% (at 40 ppb) and 9.57 ± 6.74% (at 4000 ppb). Moreover, the sorptive loss patterns at high concentration samples (4000 ppb) tend to increase in relation with increasing molecular weight of target compounds, although such pattern disappears in low concentration samples (40 ppb). The observed loss patterns, if evaluated in relation to some key parameters like concentration or compound type, suggest the possibility that the sorptive loss of target compounds in storage media can occur in a predictable manner.     

Acetamide/SO2Cl2 as an efficient reagent for Friedel–Craft’s acylation of aromatic compounds under ultrasonic and microwave conditions

Acetamide/SO₂Cl₂ reagent has been developed for effective Friedel–Craft’s acylation of aromatic compounds. Acylation of aromatic compounds with acetamide/SO₂Cl₂ was much more effective and faster than analogous (acetamide/SOCl₂) and (acetamide/POCl₃) reagents even under conventional conditions. However, microwave and ultrasonic assisted reactions afforded high yields of products in very short reaction times (30–40 min under sonication and 3–4 min under microwave assisted conditions).     

Sensitive electrochemical detection of ozone

An amperometric sensor capable of detecting ozone in the low ppb range was developed. The most suitable electrochemical cell was based on a gold-Nafion electrode with 0.5 M H₂SO₄ as internal electrolyte solution. It is demonstrated, that by careful selection of the experimental conditions such as electrode materials, electrolyte solution and applied potential the determination of low concentrations of ozone in air is possible with detection limits of 0.6 ppb. Cross-sensitivities to the major inorganic gaseous species found in the atmosphere, are also presented, and the use of a chemical filter to circumvent the interference by nitrogen dioxide is described.     

Solid–liquid phase equilibria in the system K2SO4–MgSO4–H2O at 318 K

The polythermal solubility diagram of the system K₂SO₄–MgSO₄–H₂O presents the formation of three double salts, picromerite, leonite, langbeinite appearing in this order with increasing temperature. In the temperature range between 314.15 K and 320.65 K, picromerite and leonite ought to coexist. The search in the literature revealed a lack of isothermal phase equilibrium data within this temperature range. Therefore, the solubility in the system K₂SO₄–MgSO₄–H₂O was determined in the whole concentration range at 318 K. The solid phases, epsomite, leonite, picromerite and arcanite occur with increasing potassium sulfate concentration. A two-salt point of leonite and picromerite is established at 0.618 molal K₂SO₄ and 3.030 molal MgSO₄ at the temperature of investigation.     

Solid–liquid phase equilibria in the systems K2SO4–MSO4–H2O (M = Co,Ni, Cu) from ambient to enhanced temperatures

Reviewing the literature solubility isotherms in the ternary systems K₂SO₄–MSO₄–H₂O (M = Co, Ni, Cu, Zn) revealed a lack at ambient temperatures. The solid–liquid phase equilibria have been determined in the systems K₂SO₄–MSO₄–H₂O (M = Co, Ni, Cu) at T = 313 K. With increasing bivalent metal sulfate concentration, the solubility of potassium sulfate rises until the two-salt point is reached. Reciprocally, the solubility of the bivalent metal sulfate hydrates (CoSO₄·7H₂O, α-NiSO₄·6H₂O, CuSO₄·5H₂O) increases with rising potassium sulfate concentration. In all three systems the double salts of Tutton's type K₂SO₄·MSO₄·6H₂O (M = Co, Ni, Cu) are formed.     

Comparative analysis of odorous volatile organic compounds between direct injection and solid-phase microextraction: Development and validation of a gas chromatography–mass spectrometry-based methodology

In this study, the feasibility of GC–MS was evaluated for the quantification of odorous volatile organic compounds (VOCs) in environmental samples. These included methyl ethyl ketone, isobutyl alcohol, methyl isobutyl ketone, and butyl acetate plus benzene, toluene, and xylene (BTX). For this purpose, the gaseous standard for these VOCs were analyzed by GC–MS with the aid of both direct injection (DI) into the GC injector and solid-phase microextraction (SPME). The liquid phase standard prepared independently was tested additionally by the DI method as a reference to gaseous calibration. The detection limit (DL) values, when tested for basic quality assurance in this study, showed large differences between DI (0.002–0.007 ng) and SPME method (1.03–1.81 ng) in terms of absolute mass. The DL values, when expressed in terms of concentration (v/v), showed considerable improvement in SPME (below 0.40 nmol mol⁻¹) relative to the DI method (∼6–15 nmol mol⁻¹). The reliability of the GC–MS method was further validated through an analysis of real environmental samples collected from an industrial area.     

Light-Struck Taste in White Wine: Protective Role of Glutathione,Sulfur Dioxide and Hydrolysable Tannins

Light exposure of white wine can cause a light-struck taste (LST), a fault induced by riboflavin (RF) and methionine (Met) leading to the formation of volatile sulfur compounds (VSCs), including methanethiol (MeSH) and dimethyl disulfide (DMDS). The study aimed to investigate the impact of different antioxidants, i.e., sulfur dioxide (SO₂), glutathione (GSH) and chestnut tannins (CT), on preventing LST in model wine (MW) and white wine (WW), both containing RF and Met. Both MW and WW samples were added with the antioxidants, either individually or in different combinations, prior to 2-h light exposure and they were stored in the dark for 24 months. As expected, the light induced the degradation of RF in all the conditions assayed. Met also decreased depending on the antioxidants added. The presence of antioxidants limited the formation of LST as lower concentrations of VSCs were found in both MW and WW samples. In the latter matrix, neither MeSH nor DMDS were detected in the presence of CT, while only DMDS was found in WW+GSH, WW+SO₂+GSH and WW+CT+SO₂ samples at a concentration lower than the perception thresholds. Considering the antioxidants individually, the order of their effectiveness was CT ≥ GSH > SO₂ in WW under the adopted experimental conditions. The results indicate tannins as an effective enological tool for preventing LST in white wine and their use will be further investigated in different white wines under industrial scale.     

Direct and rapid determination of sulphate in environmental samples with diffuse reflectance Fourier transform infrared spectroscopy using KBr substrate

The feasibility of employing diffuse reflectance Fourier transform infrared spectroscopy (DRS-FTIR) as a sensitive tool in the submicrogram level determination of sulphate (SO₄²⁻) was checked in this work. This paper presents the development of a new, rapid and precise analytical method for ppb levels of sulphate (SO₄²⁻) in environmental samples like coarse and fine aerosol particles, dry deposits and soil. The determination of submicrogram levels of sulphate is based on the selection of a quantitative analytical peak at 617 cm⁻¹ among the three observed vibrational peaks and preparing calibration curve using different known concentrations of sulphate by diffuse reflectance-Fourier transform infra red spectrometric (DRS-FTIR) technique. Pre-weighed and ground IR grade KBr was used as substrate over which remarkably wide range of known concentration of sulphate was sprayed and dried. The dried sample was analysed by DRS-FTIR. Three calibration curves for three different concentration ranges of sulphate were prepared for samples containing low and relatively higher sulphate contents. The relative standard deviation (n = 8) for the sulphate concentration ranges, 2.5-35.5, 25.5-165, 55-1000 μg/0.5 g KBr, as used to prepare calibration curves, were 2.4%, 2.1% and 1.5%, respectively. The relative standard deviation for the sulphate concentration in real samples were found to be in the range, 3.11-5.76% (n = 16), 4.05-7.75% (n = 16) and 1.48-3.52% (n = 10) for aerosol, dry deposits and soil, respectively. The LOD of the method is 0.20 μg/g SO₄²⁻. The F- and t-tests were performed to check the analytical quality assurance test. The noteworthy feature of the reported method is the non-interference of any of the associated anions and cations. The results were compared with that of ion-chromatographic method with high degree of acceptability. The method can be applied in wide concentration ranges. A method for sulphate determination was introduced that did not require pretreatment of samples. This method employed the direct determination of the sulphate. The method is reagent less, nondestructive, very fast, repeatable, and accurate and has high sample throughput value.     

Structural and spectroscopy studies of complexes of the uranyl ion with 2,2′-bipyridine-N,N′-dioxide

2,2′-Bipyridine-N,N′-dioxide (bypO₂ = L) complexes of the composition [UO₂(bypO₂)₂(NO₃)₂]·2H₂O (UO₂–L₂–NO₃), [UO₂(bypO₂)₂H₂O](ClO₄)₂ (UO₂–L₂–ClO₄) and [UO₂bypO₂(H₂O)₂SO₄] (UO₂–L–SO₄) have been prepared by the reactions of the respective hydrated uranyl salts with the bypO₂ ligand in water. The structures of the complexes were elucidated using elemental and thermal analyses, IR and luminescence spectroscopy as well as luminescence lifetime measurements. The IR spectra show that the bonding between uranium and bypO₂, as well as uranium and water or a counter ion (NO₃⁻ and SO₄²⁻) is formed. The nitrate or sulfate groups coordinate to the central metal ions in a monodentate manner. From TG–DTA curves, the nature of the water molecules present in the complexes and the decomposition temperature of the dehydrated uranyl complexes were determined. The thermal stability of the anhydrous uranyl complexes increases in the series: (UO₂–L₂–NO₃) < (UO₂–L₂–ClO₄) < (UO₂–L–SO₄). All the compounds show green-yellow intense luminescence. The main fluorescence bands and the emission lifetimes in these complexes were determined. The luminescence spectra of all the prepared complexes differ from each other with respect to their peak maxima positions. The luminescence lifetimes also vary. The structure of the (UO₂–L–SO₄) complex was determined by X-ray single-crystal analysis.     

Synthesis,characterization and spectroscopic study of riboflavin–molybdenum complex

A riboflavin–molybdenum [(RF)–Mo(V)] complex in powder form was synthesized and characterized by elemental analysis, UV–Vis, IR, NMR spectroscopy and X-ray diffraction. During the synthesis of this metal complex, another metal complex [Mo₂O₄(H₂O)₆]²⁺ was also synthesized and characterized. The results of X-ray diffraction study have revealed an orthorhombic cubic system for the RF–Mo complex. The steady state absorption and emission studies of RF and RF–Mo in hydrochloric acid (HCl) of varying pH were investigated. The steady state absorption with RF–Mo showed distinct changes in the absorption spectra of RF after complexation. The steady state emission results, consistent with prior reports showed fluorescence quenching in the aqueous solution of both RF and RF–Mo in HCl with the proton acting as a quencher. The Stern–Volmer constant observed was 108.79 and 98.68 for RF and RF–Mo, respectively. The binding constant for RF–Mo complex was found to be 1.201 × 10³ M⁻¹ at 298 K.     

Annular diffusion denuder for simultaneous removal of gaseous organic compounds and air oxidants during sampling of carbonaceous aerosols

A specially designed annular diffusion denuder for simultaneous removal of organic gaseous compounds and atmospheric oxidants in carbonaceous aerosol sampling is presented. Various kinds of denuder coatings were compared with respect to the collection efficiency of both organic gaseous compounds and NO₂ and ozone. The optimum sorbent is a mixture of activated charcoal and sulfite on molecular sieve. To ensure high collection efficiency over long-term field operation, two annular diffusion denuders are combined in series. The first half of the first denuder is filled with Na₂SO₃ on molecular sieve (23 cm long layer) while the second half of the first denuder and the whole second denuder are filled with activated charcoal (the total length of the charcoal section is 67 cm).     

Combination of solid phase extraction and in vial solid phase derivatization using a strong anion exchange disk for the determination of nerve agent markers

Alkylphosphonic acids (APAs) are degradation products and chemical markers of organophosphorous (OP) nerve agents (chemical warfare agents). Anion exchange disk-based solid phase extraction (SPE) has been combined with in vial solid phase derivatization (SPD) and GC–MS analysis for the determination of APAs in aqueous samples. The optimization of critical method parameters, such as the SPD reaction, was achieved using statistical experimental design and multivariate data analysis. The optimized method achieved quantitative recoveries in the range from 83% to 101% (n = 13, RSD from 4% to 10%). The method was sensitive, with LODs in SIM mode of 0.14 ppb, and demonstrated excellent linearity with an average R² ≥ 0.99 over the concentration range of 0.07–1.4 ppm in full scan mode and from 0.14 ppb to 14 ppb in SIM mode. For forensic applications, aqueous samples containing APAs at concentrations exceeding 14 ppb were concentrated and target analytes were successfully identified by spectral library and retention index matching. Method robustness was evaluated using aqueous samples from the official OPCW Proficiency Test (round 19) and all APAs present in the sample were conclusively identified. The SPE disk retained the underivatized APAs in a stable condition for extended periods of time. No significant losses of APAs from the disk were observed over a 36-day period. Overall, the method is well suited to the qualitative and quantitative analysis of degradation markers of OP nerve agents in aqueous matrices with simplicity, a low risk of cross-contamination and trace level sensitivity.     

Room temperature ppb level Cl2 sensing using sulphonated copper phthalocyanine films

We present room temperature chemiresistive gas sensing characteristics of drop casted sulphonated copper phthalocyanine (CuTsPc) films. It has been demonstrated that these films are highly selective to Cl₂ and the sensitivity in the 5-2000 ppb range varies linearly between 65 and 625%. However, for concentrations ≥2000 ppb, the response becomes irreversible, which is found to be due to the chemical bond formation between Cl₂ and SO₃Na group of CuTsPc films. The X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FTIR) data confirms the oxidation of SO₃Na group by Cl₂ gas.     

The fundamental properties of the direct injection method in the analysis of gaseous reduced sulfur by gas chromatography with a pulsed flame photometric detector

In this study, the fundamental aspects of gas chromatography with a pulsed flame photometric detector were investigated through the calibration of gaseous reduced sulfur compounds based on the direct injection method. Gaseous standards of five reduced sulfur compounds (hydrogen sulfide, methane thiol, dimethyl sulfide, carbon disulfide, and dimethyl disulfide) were calibrated as a function of injection volume and concentration level. The results were evaluated by means of two contrasting calibration approaches: fixed standard concentration method (variable volumetric injection of standard gases prepared at a given concentration) and fixed standard volume method (injection of multiple standards with varying concentrations at a given volume). The optimum detection limit values of reduced sulfur compounds, when estimated at 100 μL of injection volume, ranged from 2.37 pg (carbon disulfide) to 4.89 pg (dimethyl sulfide). Although these detection limit values improved gradually with decreasing injection volume, the minimum detectable concentration (e.g., in nmol mol⁻¹ scale) remained constant due to a balance by the sample volume reduction. The linearity property of pulsed flame photometric detector also appeared to vary dynamically with changes in its sensitivity. According to this study, the performance of pulsed flame photometric detector, when tested by direct injection method, is highly reliable to precisely describe the behavior of reduced sulfur compounds above ∼20 nmol mol⁻¹.     

A sensor based on electrodes supported on ion-exchange membranes for the flow-injection monitoring of sulphur dioxide in wines and grape juices

A sensitive and fast responding electrochemical sensor is described for the determination of free and total sulphur dioxide in wines and grape juices which prevents interferences coming from ethanol and other natural components. It consists of a cell provided with a porous gold working electrode supported on one face of an ion-exchange membrane, acting as a solid polymer electrolyte (SPE), which allows gaseous electroactive analytes to be detected. This sensor was used as an amperometric detector for a flow injection system in which controlled volumes of headspace equilibrated with samples were injected. This approach was adopted to make also possible the determination of total SO₂, avoiding drawbacks caused by the high relative humidity generated by the sample heating resulting from the neutralization reaction of excess NaOH, whose addition was required to release sulphur dioxide from its combined forms. Factors affecting the detection process were examined and optimised. Under the identified optimal conditions, SO₂ detection resulted in sharp peaks which allowed to infer detection limits for a signal-to-noise ratio of 3, referred to liquid samples, of 0.04 and 0.02 mg L⁻¹ for free and total SO₂ which were determined at 20 and 35 °C, respectively. Moreover, the responses were found to be characterized by good repeatability (±2% and ±4%, respectively) and linear dependence on the SO₂ concentration over a wide range (0.2-500 mg L⁻¹ for both free and total SO₂). Finally, the long-term stability of the sensor turned out to be totally satisfactory in that responses changed of ±9% alone even after long periods of continuous use. The application to some commercial wines and grape juices is also presented.     

Trace analysis of uranyl ion (UO2) in aqueous solution by fluorescence turn-on detection via aggregation induced emission enhancement effect

A sensitive fluorescence turn-on method for trace amounts of uranyl ion (UO₂²⁺) in solution has been developed in this study, based on aggregation induced emission enhancement (AIEE) characteristics of 4-pethoxycarboxyl salicylaldehyde azine (PCSA) induced by complex interaction between UO₂²⁺ and PCSA. Under optimized conditions, a fluorescence enhancement at 540 nm could be observed, which was linearly related to the concentration of UO₂²⁺ in the range of 1–25 ppb (part per billion). Analytical data showed that a detection limit of 0.2 ppb was achieved with the relative standard deviation (R.S.D.) 1.3% (n = 5). The proposed method was successfully utilized in quantifying UO₂²⁺ in fuel processing wastewaters.     

An accurate and reliable analysis of trimethylamine using thermal desorption and gas chromatography–time of flight mass spectrometry

Trimethylamine (TMA) is well-known for manifesting the odor of rotting fish and urine. The analysis of TMA in environmental samples generally suffers from low reproducibility and poor sensitivity. In this study, a technique for the quantitative analysis of gas phase TMA was developed using thermal desorption (TD)-gas chromatography (GC)-time of flight mass spectrometry (TOF-MS). This new approach yielded good linearity (R² = 0.9930), precision (RSE = 1.59%), and high sensitivity with the method detection limit (MDL) of 51 pg, i.e., detection of 0.021 ppb of TMA at 1 L sample (limit of detection (LOD): 5.32 pg (0.002 ppb). This method was tested against gas samples collected from two representative sources of TMA: (1) rotten thornback fish and (2) cat urine-soaked clay. The concentration of TMA in these samples, when analyzed after treatment at varying dilution ratios, averaged 293 ± 29.7 ppm (RSE = 3.82%) and 74.1 ± 5.78 ppb (RSE = 3.19%), respectively. The feasibility of this approach, when tested with TD–GC–Quadruple (Q) MS, showed a good compatibility with moderately reduced sensitivity. The results of this study demonstrated that one can achieve highly reliable and reproducible analysis of TMA from environmental samples when using thermal desorption (for pretreatment) and detection (by the TOF or Q-MS system).