Aspects of the physical chemistry of polymers, biomaterials and mineralised tissues investigated with atomic force microscopy (AFM)

Beyond being merely a tool for measuring surface topography, atomic force microscopy (AFM) has made significant contributions to various scientific areas dealing with physical chemistry processes. This paper presents aspects of the physical chemistry at surfaces and interfaces of polymers, biomaterials and tissues investigated with AFM. Selected examples presented include surface induced self-assembly of polymer blends, copolymer interfacial reinforcement of immiscible homopolymers, protein adsorption on biomaterials and erosion of mineralised human tissues. In these areas, AFM is a useful and versatile tool to study structural or dynamic sample properties including thermodynamically driven surface evolution of polymer surfaces, lateral surface composition of interfaces, adsorption processes, and the metrology of demineralisation phenomena.     

Adsorption of simple fluid on silica surface and nanopore: effect of surface chemistry and pore shape

This paper reports a molecular simulation study on the adsorption of simple fluids (argon at 77 K) on hydroxylated silica surfaces and nanopores. The effect of surface chemistry is addressed by considering substrates with either partially or fully hydroxylated surfaces. We also investigate the effect of pore shape on adsorption and capillary condensation by comparing the results for cylindrical and hexagonal nanopores having equivalent sections (i.e., equal section areas). Due to the increase in the polarity of the surface with the density of OH groups, the adsorbed amounts for fully hydroxylated surfaces are found to be larger than those for partially hydroxylated surfaces. Both the adsorption isotherms for the cylindrical and hexagonal pores conform to the typical behavior observed in the experiments for adsorption/condensation in cylindrical nanopores MCM-41. Capillary condensation occurs through an irreversible discontinuous transition between the partially filled and the completely filled configurations, while evaporation occurs through the displacement at equilibrium of a hemispherical meniscus along the pore axis. Our data are also used to discuss the effect of surface chemistry and pore shape on the BET method. The BET surface for fully hydroxylated surfaces is much larger (by 10-20%) than the true geometrical surface. In contrast, the BET surface significantly underestimates the true surface when partially hydroxylated surfaces are considered. These results suggest that the surface chemistry and the choice of the system adsorbate/adsorbent is crucial in determining the surface area of solids using the BET method.     

Evanescent wave cavity ring-down spectroscopy (EW-CRDS) as a probe of macromolecule adsorption kinetics at functionalized interfaces

Evanescent wave cavity ring-down spectroscopy (EW-CRDS) has been employed to study the interfacial adsorption kinetics of coumarin-tagged macromolecules onto a range of functionalized planar surfaces. Such studies are valuable in designing polymers for complex systems where the degree of interaction between the polymer and surface needs to be tailored. Three tagged synthetic polymers with different functionalities are examined: poly(acrylic acid) (PAA), poly(3-sulfopropyl methacrylate, potassium salt) (PSPMA), and a mannose-modified glycopolymer. Adsorption transients at the silica/water interface are found to be characteristic for each polymer, and kinetics are deduced from the initial rates. The chemistry of the adsorption interfaces has been varied by, first, manipulation of silica surface chemistry via the bulk pH, followed by surfaces modified by poly(L-glutamic acid) (PGA) and cellulose, giving five chemically different surfaces. Complementary atomic force microscopy (AFM) imaging has been used for additional surface characterization of adsorbed layers and functionalized interfaces to allow adsorption rates to be interpreted more fully. Adsorption rates for PSPMA and the glycopolymer are seen to be highly surface sensitive, with significantly higher rates on cellulose-modified surfaces, whereas PAA shows a much smaller rate dependence on the nature of the adsorption surface.     

Coverage effects and the nature of the metal-sulfur bond in S/Au(111): high-resolution photoemission and density-functional studies

The bonding of sulfur to surfaces of gold is an important subject in several areas of chemistry, physics, and materials science. Synchrotron-based high-resolution photoemission and first-principles density-functional (DF) slab calculations were used to study the interaction of sulfur with a well-defined Au(111) surface and polycrystalline gold. Our experimental and theoretical results show a complex behavior for the sulfur/Au(111) interface as a function of coverage and temperature. At small sulfur coverages, the adsorption of S on fcc hollow sites of the gold substrate is energetically more favorable than adsorption on bridge or a-top sites. Under these conditions, S behaves as a weak electron acceptor but substantially reduces the density-of-states that gold exhibits near the Fermi edge. As the sulfur coverage increases, there is a weakening of the Au-S bonds (with a simultaneous reduction in the Au --> S charge transfer and a modification in the S sp hybridization) that facilitates changes in adsorption site and eventually leads to S-S bonding. At sulfur coverages above 0.4 ML, S(2) and not atomic S is the more stable species on the gold surface. Formation of S(n)(n > 2) species occurs at sulfur coverages higher than a monolayer. Very similar trends were observed for the adsorption of sulfur on polycrystalline surfaces of gold. The S atoms bonded to Au(111) display a unique mobility/reactivity not seen on surfaces of early or late transition metals.     

Interaction of ester functional groups with aluminum oxide surfaces studied using infrared reflection absorption spectroscopy

The bonding of two types of ester group-containing molecules with a set of different oxide layers on aluminum has been investigated using infrared reflection absorption spectroscopy. The different oxide layers were made by giving typical surface treatments to the aluminum substrate. The purpose of the investigation was to find out what type of ester-oxide bond is formed and whether this is influenced by changes in the composition and chemistry of the oxide. The extent by which these bonded ester molecules resisted disbondment in water or substitution by molecules capable of chemisorption was also investigated. The ester groups were found to show hydrogen bonding with hydroxyls on the oxide surfaces through their carbonyl oxygens. For all oxides, the ester groups showed the same nu(C = O) carbonyl stretching vibration after adsorption, indicating very similar bonding occurs. However, the oxides showed differences in the amount of molecules bonded to the oxide surface, and a clear relation was observed with the hydroxyl concentration present on the oxide surface, which was determined from XPS measurements. The two compounds showed differences in the free to bonded nu(C = O) infrared peak shift, indicating differences in bonding strength with the oxide surface between the two types of molecules. The bonding of the ester groups with the oxide surfaces was found to be not stable in the presence of water and also not in the presence of a compound capable of chemisorption with the aluminum oxide surface.     

Effect of surface oxidation on the interaction of 1-methylaminopyrene with gold nanoparticles

The effect of the surface chemistry of gold nanoparticles (GNPs) on the GNP-amine (-NH(2)) interaction was investigated via conjugating an amine probe--1-methylaminopyrene (MAP) chromophore--with three Au colloidal samples of the same particle size yet different surface chemistry. The surface of laser-irradiated and ligand-exchanged-irradiated GNPs is covered with acetonedicarboxylic ligands (due to laser-introduced citrate oxidization) and citrate ligands, respectively, and both surfaces contain oxidized Au species which are essentially lacking for the citrate-capped GNPs prepared by the pure chemical approach. Both laser-irradiated samples show inferior adsorption capacity of MAP as compared with the purely chemically prepared GNPs. Detailed investigations indicate that MAP molecules mainly complex directly with Au atoms via forming Au-NH(2)R bonds, and the oxidization of the GNP surface strongly influences the ratio of this direct bonding to the indirect bonding originating from the electrostatic interaction between protonated amine (-NH(3)(+)) and negatively charged surface ligands. The impact of the oxidized GNP surface associated with the laser treatment is further confirmed by aging experiment on GNP-MAP conjugation systems, which straightforwardly verifies that the surface oxidation leads to the decrease in the MAP adsorption on GNPs.     

Adsorption and conformation of carboxymethyl cellulose at solid-liquid interfaces using spectroscopic, AFM and allied techniques

Carboxymethyl cellulose (CMC) is a polysaccharide which is widely used in many industrial sectors including food, textiles, paper, adhesives, paints, pharmaceutics, cosmetics and mineral processing. It is a natural organic polymer that is non-toxic and biodegradable. These properties make it ideal for industrial applications. However, a general lack of understanding of the interaction mechanism between the polysaccharides and solid surfaces has hindered the application of this polymer. In this work, adsorption of CMC at the solid-liquid interface is investigated using adsorption and electrophoretic mobility measurements, FTIR, fluorescence spectroscopy, AFM and molecular modeling. CMC adsorption on talc was found to be affected significantly by changes in solution conditions such as pH and ionic strength, which indicates the important role of electrostatic force in adsorption. The pH effect on adsorption was further proven by AFM imaging. Electrokinetic studies showed that the adsorption of CMC on talc changed its isoelectric point. Further, molecular modeling suggests a helical structure of CMC in solution while it is found to adsorb flat on the solid surface to allow its OH groups to be in contact with the surface. Fluorescence spectroscopy studies conducted to investigate the role of hydrophobic bonding using pyrene probe showed no evidence of the formation of hydrophobic domains at talc-aqueous interface. Urea, a hydrogen bond breaker, markedly reduced the adsorption of CMC on talc, supports hydrogen bonding as an important factor. In FTIR study, the changes to the infrared bands, associated with the CO stretch coupled to the CC stretch and OH deformation, were significant and this further supports the strong hydrogen bonding of CMC to the solid surface. In addition, Langmuir modeling of the adsorption isotherm suggests hydrogen bonding to be a dominant force for polysaccharide adsorption since the adsorption free energy of this polymer was close to that for hydrogen bond formation. All of the above results suggest that the main driving forces for CMC adsorption on talc are a combination of electrostatic interaction and hydrogen bonding rather than hydrophobic force.     

Self‐assembly of stearic acid on aluminium: the importance of oxide surface chemistry

The influence of ambient atmospheric exposure on the chemistry of the magnetron‐sputtered aluminium surface has been characterized as hydroxyl incorporation to the oxide surface and concurrent adsorption of airborne carbonaceous contamination. Here, the consequence of these changes in oxide surface chemistry upon the adsorption of stearic acid from solution is investigated. Water contact angle and polarization modulation infrared refection–absorption spectroscopy (PM‐IRRAS) reveal a strong dependence of stearic acid monolayer order upon ambient exposure time prior to assembly. It is proposed that hydroxyl formation in the ambient atmosphere increases the stearic acid adsorption density and thus the self‐assembled monolayer (SAM) order, whereas airborne carbonaceous material blocks these adsorption sites and introduces disorder in the monolayers through a decrease in adsorption density. Monolayer adsorption has been correlated with the aluminium oxide surface chemistry. It is proposed that this phenomenon represents an explanation for the irreproducible results often reported for assembly on metal oxide substrates. Furthermore, it indicates that in this broad class of material surfaces assembly can be used as a means of estimating the reactivity of surfaces with respect to organic overlayers such as paints and adhesives. Removal of adsorbed carbonaceous material from the aluminium surface using an oxygen plasma resulted in a significantly increased order of the stearic acid monolayer, as assessed by water contact angle. This observation is rationalized as the removal of carbonaceous material blocking surface adsorption sites by the plasma, but retention of the underlying hydroxyl functionality. This is predicted to have important implications in the preparation of aluminium for painting and adhesive bonding. Copyright © 2004 John Wiley & Sons, Ltd.     

Adsorption and Bioactivity of Protein A on Silicon Surfaces Studied by AFM and XPS

The adsorption of protein A on silicon surfaces was studied by atomic force microscopy (AFM) and X-ray photoelectron spectroscopy. The deposition was made statically from various concentrations of protein A in water solution. The biological activity was checked by the immobilization of rabbit immunoglobulin G. The protein adsorption occurs in least two different phases and leads to a multilayer film. The first monolayer of proteins is rapidly adsorbed on the surface. The adsorption of the second layer of proteins occurs much more slowly (a thousand times slower) and also involves the third monolayer. The protein A of the first monolayer is denaturated and biologically inactive. On the contrary, the proteins of the second monolayer keep their natural diameter and remain biologically active. AFM artifacts such as the convolution with small objects and the resulting estimation of the coverage ratio are discussed. Copyright 2001 Academic Press.     

Interfacial properties of cellulose nanoparticles obtained from acid and enzymatic hydrolysis of cellulose

Rod-shaped cellulose nanocrystals obtained by acid hydrolysis of eucalyptus fibers (CNCa) presented high aspect ratio (estimated length and width of 180 and 5 nm, respectively) and zeta potential of ?(17 ± 1) mV at pH 6. This typical morphology of cellulose nanocrystals was in contrast to nanoparticles obtained upon enzymatic hydrolysis of bacterial cellulose (CNCe), which were asymmetric and irregular due to surface-bound cellulases and presented a distinctive surface roughness. Interestingly, CNCe also displayed axial grooves, to yield a C-shape cross section that has not been reported before. The effect of the characteristic shape and surface chemistry of CNCa and of grooved CNCe was studied at oil/water interfaces and solid surfaces. Emulsions (20 % v/v oil) prepared with the CNCa were more stable than those prepared with CNCe, owing to their characteristic shape and surface chemistry. Hydrophilic (silica surfaces cationized by pre-adsorbed polycation) and hydrophobic (polystyrene films) solid surfaces were used as substrates for the adsorption of CNCe and CNCa for each type of surface. The ellipsometric data and AFM images indicated larger affinity of CNCe than CNCa for the hydrophobic surface. On the other hand, CNCa formed homogeneous monolayer on hydrophilic surfaces, whereas CNCe formed discontinuous films. Sequential adsorption behavior of CNCa on CNCe layers (or vice versa) suggested that the interaction between them is controlled by the orientation of enzymes bound to CNCe.     

Fibrinogen adsorption on three silica-based surfaces: conformation and kinetics

Using AFM (atomic force microscopy) to probe protein conformation and arrangement, and TIRF (total internal reflectance fluorescence) to monitor kinetics, fibrinogen adsorption on three different silica-based surfaces was studied: the native oxide on silicon, acid-etched microscope slides, and acid-etched polished glass. The three are chemically similar, but the microscope slide is rougher and induces AFM tip instabilities that appear as high spots on the bare surface. Fibrinogen's conformation and transport-limited adsorption kinetics are found to be quantitatively similar on all three surfaces. Further, the number of adsorbed proteins in progressive AFM micrographs quantitatively match the coverages measured by TIRF during early adsorption. Surfaces appear full, via AFM, when adsorbed amounts are about an order of magnitude below their true saturation levels (via TIRF) because, above about 0.26 mg/m(2), individual proteins cannot be discerned. The results demonstrate how the appearance of AFM micrographs can be misleading regarding surface saturation. On all three surfaces, fibrinogen is, at most, slightly aggregated, showing limited, if any, surface mobility. The complexities of the microscope slide's surface landscape minimally impact adsorption.     

A Metallic Surface Corrosion Study in Aqueous NaCl Solutions Using Atomic Force Microscopy (AFM)

We report an upper-division undergraduate solid-state materials chemistry experiment involving the pit and crevice corrosion of a copper surface caused by an aqueous NaCl solution simulating a seawater environment. Surface corrosion of the copper can be shown quite dramatically using atomic force microscopy (AFM) within only hours of exposure to the saline solution. The copper surfaces can also be treated with an alkanethiol solution to form a self-assembled monolayer (SAM) on the surface. When exposed to the salt-water solution, the SAM layer is shown by AFM to protect the surface from corrosion. We have also shown that several different AFM analysis methods are needed to adequately quantify the surface features including roughness and power spectral density. This experiment enables students to not only see how AFM can be used to observe changes in surface morphology, but also learn to develop an understanding of the analysis techniques used to quantify AFM data.     

Dissimilar pH-dependent adsorption features of bovine serum albumin and α-chymotrypsin on mica probed by AFM

We studied bovine serum albumin (BSA) and α-chymotrypsin adsorption onto mica surfaces over a large pH range by atomic force microscopy (AFM) measurements in liquid. Data analyses (height, roughness and roughness factor) brought new insights on the conformation of proteins in soil environments, with mica as a model of soil phyllosilicates and non-hydrophobic surfaces. Validation of AFM approach was performed on BSA, whose behavior was previously described by nuclear magnetic resonance and infra-red spectroscopic methods. Maximum adsorption was observed near the isoelectric point (IEP). A stronger interaction and a lower amount of adsorbed proteins were observed below the IEP, which contrasted with the progressive decrease of adsorption above the IEP. We then studied the adsorption of α-chymotrypsin, a proteolytic enzyme commonly found in soils. AFM pictures demonstrated a complete coverage of the mica surface at the IEP in contrast to the BSA case. Comparison of the AFM data with other indirect methods broadened the understanding of α-chymotrypsin adsorption process through the direct display of the protein adsorption patterns as a function of pH.     

The influence of electrostatic forces on protein adsorption

In this paper we investigate the importance of electrostatic double layer forces on the adsorption of human serum albumin by UV-ozone modified polystyrene. Electrostatic forces were measured between oxidized polystyrene surfaces and gold-coated atomic force microscope (AFM) probes in phosphate buffered saline (PBS) solutions. The variation in surface potential with surface oxygen concentration was measured. The observed force characteristics were found to agree with the theory of electrical double layer interaction under the assumption of constant potential. Chemically patterned polystyrene surfaces with adjacent 5 microm x 5 microm polar and non-polar domains have been studied by AFM before and after human serum albumin adsorption. A topographically flat surface is observed before protein adsorption indicating that the patterning process does not physically modify the surface. Friction force imaging clearly reveals the oxidation pattern with the polar domains being characterised by a higher relative friction compared to the non-polar, untreated domains. Far-field force imaging was performed on the patterned surface using the interleave AFM mode to produce two-dimensional plots of the distribution of electrostatic double-layer forces formed when the patterned polystyrene surfaces is immersed in PBS. Imaging of protein layers adsorbed onto the chemically patterned surfaces indicates that the electrostatic double-layer force was a significant driving force in the interaction of protein with the surface.     

Single DNA molecules as probes for interrogating silica surfaces after various chemical treatments

We examined the adsorption of single YOYO-1-labeled λ-DNA molecules at glass surfaces after treatment with various chemical cleaning methods by using total internal reflection fluorescence microscopy (TIRFM). The characteristics of these surfaces were further assessed using contact angle (CA) measurements and atomic force microscopy (AFM). By recording the real-time dynamic motion of DNA molecules at the liquid/solid interface, subtle differences in adsorption affinities were revealed. The results indicate that the driving force for adsorption of DNA molecules on glass surfaces is mainly hydrophobic interaction. We also found that surface topography plays a role in the adsorption dynamics.     

Protein interactions with model chromatographic stationary phases constructed using self-assembled monolayers

Model surfaces representative of chromatographic stationary phases were developed by immobilising an homologous series (C2-C18) of n-alkylthiols, mixed monolayers of C4/C18 and thioalkanes with alcohol, carboxylic acid, amino and sulphonic acid terminal groups onto a flat, silver-coated glass surface using self-assembled monolayer (SAM) chemistry. The processes of adsorption and desorption of serum albumins onto the monolayer surfaces was monitored in real-time using surface plasmon resonance (SPR). Alkyl-terminated SAMs all showed a strong adsorption of bovine serum albumin which was largely independent of alkyl chain length, the ratio of mixed C4/C18 SAMs or the solution pH/ionic strength. The adsorption of human serum albumin to carboxylic and amine terminated SAMs was shown to be predominantly via non-electrostatic interactions (hydrophobic or hydrogen bonding). However, sulphonic acid terminated SAMs showed almost exclusively electrostatic interactions with human serum albumin. This preliminary work using self-assembled monolayer chemistry confirms the usefulness of well characterised SAMs surfaces for investigating protein adsorption and desorption onto/from model chromatography surfaces and gives some guidance for selecting appropriate functionalities to develop better surfaces for chromatography and electrophoresis.     

TAT peptide immobilization on gold surfaces: a comparison study with a thiolated peptide and alkylthiols using AFM, XPS, and FT-IRRAS

A TAT peptide was used to functionalize a gold surface by three different methods: adsorption from solution, microcontact printing, and dip-pen nanolithography (DPN). The composition and structure of the modified gold was characterized by atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), and Fourier transform -infrared reflection absorption spectroscopy (FT-IRRAS). We used two well-studied alkylthiols, mercaptohexadecanoic acid and 1-octadecanethiol, as a comparison in order to understand the structure of the TAT peptide monolayers prepared by the three methods. AFM studies allowed us to assess the homogeneity after each modification protocol. XPS was used to characterize the chemical composition of the gold surface after each functionalization procedure. The XPS results showed that surfaces modified with the TAT peptide by the three methods exhibit similar surface chemistry. Finally, FT-IRRAS experiments allowed us to conclude that the structure of the alkyl chains of the TAT peptides is fairly disordered and different after each procedure. Regardless of the type of surface functionalization method used, the monolayer of TAT peptide formed on the surface was of "liquidlike" nature.     

Nanotechnological evaluation of protein adsorption on dialysis membrane surface hydrophilized with polyvinylpyrrolidone

Hydrophilizing synthetic polymer dialysis membranes with polyvinylpyrrolidone (PVP) play an important role for inhibition of protein adsorption on membrane surface. In the present study, the effect of PVP on protein adsorption was evaluated from a nano-scale perspective. Swelling behavior of PVP present on wet polysulfone (PS)/PVP film surfaces was observed by atomic force microscopy (AFM). Fibrinogen and human serum albumin (HSA) were immobilized on the tip of AFM probes, with which a force-curve between protein and wet PS/PVP film surface was measured by AFM while scanning in order to visualize two-dimensional protein adsorbability on film surfaces. Furthermore, HSA adsorbability on non-PVP containing PEPA dialysis membrane (FLX-15GW) and PVP containing PEPA dialysis membrane (FDX-150GW) was evaluated by the AFM force-curve method. As a result, PS/PVP film surface was completely covered with hydrated and swollen PVP at 5 wt% or more PVP content. Protein adsorbability on PS/PVP film surfaces decreased greatly with increasing content of PVP. The adsorption of HSA was inhibited by the presence of PVP on film surfaces more significantly than that of more hydrophobic fibrinogen. HSA adsorbability on wet FLX-15GW dialysis membrane surface was 428 ± 174 pN whereas that on wet FDX-150GW dialysis membrane surface was 42 ± 29 pN.     

Infrared study of the kinetics and mechanism of adsorption of acrylic polymers on alumina surfaces

In this paper, we studied the kinetics of the adsorption of poly(methyl methacrylate), PMMA, onto native aluminum oxide surfaces by X-ray photoelectron spectroscopy and reflection-absorption infrared spectroscopy, with the intent of tracking the various changes observed in the infrared spectrum of the adsorbed polymer layer as a function of adsorption time. Specifically, we utilized the relative changes in the absorption bands of the carbonyl, carboxylic acid, and carboxylate groups to determine the sequence of events that culminate in the formation of bonds between carboxylate groups on hydrolyzed PMMA and specific sites on the aluminum oxide surface. We have shown that the adsorption process involves the hydrolysis of a fraction of the methoxy groups of the PMMA to generate COOH groups. Unlike previous assumptions, the formation of COOH groups on the PMMA chains does not constitute a sufficient condition for the actual chemisorption of the polymer chains onto the metal oxide surface. To promote bonding, the acid groups must undergo dissociation to form the carboxylate groups, followed subsequently by actual bond formation, that is, active anchoring, on the surface. This process is mediated by the aluminum oxide sites on the surface in the presence of water. Hence, the adsorption process occurs via a two-step mechanism, in which the first step, that is, the hydrolysis step, is a necessary but insufficient condition and the second step, that is, the anchoring step, is largely dependent on the type of interfacial chemistry possible for a particular polymer-metal oxide surface, the polymer conformation, the molecular weight, and the flexibility of the adsorbing molecules.