X-ray surface radiolysis: Kinetics of the metal-organic interface formation

Grazing incidence x-ray irradiation of a Langmuir monolayer deposited at the interface between an aqueous silver salt solution and the air leads to the formation of a metallic silver layer of thickness about 4.5 nm, in agreement to the x-ray penetration depth at the air – water interface. Moreover using the scattering and fluorescence induced by the x-ray, we show that it is possible to follow the kinetics of formation of the layer. It appear that the silver layer is formed in two steps: first, the formation of small oriented cristallites, and second, the coalescence of the cristallites forming large plates.     

Effect of metallic nanoparticle sizes on the local field near their surface

We have used numerical calculations based on Mie theory to analyze the near field distribution patterns for 4–150 nm spherical silver nanoparticles (nanospheres). We have shown that as the nanoparticle sizes increase, the region where “hot spots” are concentrated is shifted to the forward hemisphere. We have observed a nonmonotonic dependence of the maximum attainable local field enhancement factor on the size of the silver nanospheres. We have determined a correlation between the optimal nanosphere size for the maximum attainable local field enhancement factor and the optical absorption efficiency factor. We have established a nonmonotonic dependence of the optimal size of the nanoparticles and the maximum attainable local field enhancement factor on the refractive index of the surrounding medium. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 75, No. 6, pp. 831–837, November–December, 2008.     

Nanosphere Templated Metallic Grating Assisted Enhanced Fluorescence

In this paper, enhanced fluorescence from a silver film coated nanosphere templated grating is presented. Initially, numerical simulation was performed to determine the plasmon resonance wavelength by varying the thickness of the silver film on top of a monolayer of 400 nm nanospheres. The simulation results are verified experimentally and tested for enhancing fluorescence from fluorescein isothiocyanate whose excitation wavelength closely matches with the plasmon resonance wavelength of the substrate with 100 nm silver film over nanosphere. The 12 times enhancement in the intensity is attributed to the local field enhancement in addition to the excitation of surface plasmon polaritons along the surface.     

Integral fluorescence enhancement by silver nanoparticles controlled via PMMA matrix

The metal-enhanced fluorescence is measured with different thickness of emission film. Silver nanoparticles are immobilized on glass slide by chemical self-assembly method. Rhodamine B molecules are dispersed in the polymer matrix of Poly(methyl methacrylate) (PMMA), then spin coated on prepared silver particles substrate with different thickness from 15 nm to 70 nm. The enhanced fluorescence is observed depending on the thickness of emission film since the average distance between rhodamine B molecules and silver nanoparticles is altered by the PMMA matrix. The 5-fold enhancement is attained. The experiment was explained qualitatively by an integral fluorescence enhancement.     

Silver and gold nanoparticle coated membranes applied to protein dot blots

Detection and identification of low abundance biomarker proteins is frequently based on various types of membrane-based devices. Lowering of the protein detection limits is vital in commercial applications such as lateral flow assays and in Western blots widely used in proteomics. These currently suffer from insufficient detection sensitivity and low retention for small 2–5 kDa proteins. In this study, we report the deposition of two types of metal nanoparticles: gold colloids (50–95 nm diameter) and silver fractals onto a range of commonly used types of membranes including polyvinylidene fluoride (PVDF). Due to strong affinity of proteins to noble metals, such modified membranes have the potential to effectively capture trace proteins preventing their loss. The membranes modified by metal particles were characterized optically and by SEM. The membrane performance in protein dot blots was evaluated using the protein—fluorophore conjugates Deep Purple-bovine serum albumin and fluorescein—human serum albumin. We found that the metal nanoparticles increase light extinction by metals, which is balanced by increased fluorescence, so that the effective fluorescence signal is unchanged. This feature combined with the capture of proteins by the nanoparticles embedded in the membrane increases the detection limit of membrane assays.     

Luminescence properties of pyron red—A new molecular probe for protein research

The dependence of the luminescence of the new anionic dye Pyron Red (PR) on the polarity of the medium is investigated. Upon passage from an aqueous phase to a nonpolar phase, PR shows a shortwave shift of the fluorescence emission maximum from 675 to 650 nm and an increase in the fluorescence quantum yield from 0.03 to 0.54–0.70. When complexed with human serum albumin, PR shows fluorescence excitation and emission maxima at 525 and 625 nm and a fluorescence quantum yield of 0.8. In a comparison of the luminescence properties of PR with those of the well-known probes ANS and K35 in water and a complex with albumin, PR is shown to have the maximum absolute sensitivity but a lower fluorescence enhancement upon binding with a protein compared to ANS. A convenient criterion of the probe sensitivity toward binding with a protein that is defined as the ratio of the fluorescence intensities of the protein-bound and the free probe A_F=F_b/F_f is proposed. The value of A_F(35) for the PR probe ranks between those for the K35 probe with a low A_F(18) and ANS with a high A_F(105). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 66, No. 3, pp. 369–374, May–June, 1999.     

Fluorescence study on Interactions of α–Crystallin with the Molten Globule State of 1, 4–β–D–Glucan Glucanohydrolase from Thermomonospora sp. induced by guanidine hydrochloride

In this paper, the interaction between α- crystallin and molten globule structure of 1,4–β–D–Glucan Glucohydrolase (TSC) from an alkalothermophilic Thermomonospora sp. was investigated mainly by fluorescence quenching spectra, circular dichroism and three dimensional fluorescence spectra under simulative physiological conditions. Denaturation studies using GdnCl indicated that TSC folds through a partially folded state that resembles molten globule at 1.8 M GdnCl. The chaperone activity of α- crystallin was employed to study refolding of TSC. Here we studied the refolding of GdnCl denatured TSC from its molten globule state (TSC-m complex) in the presence and absence of α-crystallin to elucidate the molecular mechanism of chaperone-mediated in vitro folding. Our results, based on intrinsic tryptophan fluorescence and ANS binding studies, suggest that α-crystallin formed a complex with a putative intermediate molten globule – like intermediate in the refolding pathway of TSC. Reconstitution of the active TSC was observed on cooling the α-crystallin • TSC -m complex to 4°C. Addition of α-crystallin to the molten globule – like intermediate of TSC (TSC-m complex) complex initiated the refolding of TSC with 69 % recovery of the biological activity of the enzyme.     

Advances in Surface-Enhanced Fluorescence

We report recent achievements in metal-enhanced fluorescence from our laboratory. Several fluorophore systems have been studied on metal particle-coated surfaces and in colloid suspensions. In particular, we describe a distance dependent enhancement on silver island films (SIFs), release of self-quenching of fluorescence near silver particles, and the applications of fluorescence enhancement near metalized surfaces to bioassays. We discuss a number of methods for various shaped silver particle deposition on surfaces.     

Interaction of molecules of the neonicotinoid imidacloprid and its structural analogs with human serum albumin

We have used fluorescence spectroscopy methods to show that imidacloprid and its structural analogs form complexes with human serum albumin (HSA). The nature of the spectral changes in the ligand×protein systems and the calculated complexation parameters suggest that these low molecular weight compounds mainly bind to a specific section of the protein molecule, near the tryptophan residue in the 214 position of the polypeptide chain. We have found that the association constants are on the order of 10⁴ M⁻¹, and the affinity of the ligands for HSA varies in the series 6-chloronicotinic acid > 6-methoxynicotinic acid = imidacloprid > the keto analog of imidacloprid. The major contribution to the complexation energy probably comes from hydrophobic interaction forces with participation of the aromatic pyridine ring of the ligands, while additional enhancement of ligand-protein affinity can be provided by the nitroimine group of imidacloprid. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 75, No. 6, pp. 859–866, November–December, 2008.     

Improved laser-induced forward transfer of organic semiconductor thin films by reducing the environmental pressure and controlling the substrate–substrate gap width

Laser-induced forward transfer (LIFT) has been investigated for bilayer transfer material systems: silver/organic film (Alq₃ or PFO). The LIFT process uses an intermediate dynamic release layer of a triazene polymer. This study focuses on the effect of introducing a controlled donor–receiver substrate gap distance and the effect of doing the transfer at reduced air pressures, whilst varying the fluence up to ∼200 mJ/cm². The gap between ‘in-contact’ substrates has been measured to be a minimum of 2–3 μm. A linear variation in the gap width from ‘in contact’ to 40 μm has been achieved by adding a spacer at one side of the substrate–substrate sandwich. At atmospheric pressure, very little transfer is achieved for Alq₃, although PFO shows some signs of successful doughnut transfer (with a large hole in the middle) in a narrow fluence range, at gaps greater than 20 μm. For the transfer of Ag/PFO bilayers at atmospheric pressure, the addition of a PFO layer onto the receiver substrate improved the transfer enormously at smaller gaps and higher fluences. However, the best transfer results were obtained at reduced pressures where a 100% transfer success rate is obtained within a certain fluence window. The quality of the pixel morphology at less than 100 mbar is much higher than at atmospheric pressure, particularly when the gap width is less than 20 μm. These results show the promise of LIFT for industrial deposition processes where a gap between the substrates will improve the throughput.     

Elemental and phase composition analysis of hydrogen-sensitive Pd/Mg–Ni films

A magnesium–nickel (Mg–Ni) film with a palladium (Pd) overcoat is switchable between a conducting metallic state and a semiconducting state through hydridation and dehydridation processes. The Pd overcoat is added to suppress possible oxidation of the alloy layer. However, some Pd and oxygen (O) atoms are still able to diffuse into the alloy layer, such that the distributions of elemental and phase compositions along the direction of depth are quite complicated. In this work, we propose a method to obtain more detailed information on the elemental and phase compositions in a Pd/Mg–Ni film by means of analyzing Pd 3d_5/2, Pd 3p_3/2, Ni 2p_3/2, Mg 1s and O 1s photoelectron spectra. The method was applied to analyze a typical Pd/Mg–Ni film sample. Results verified that Pd can diffuse into the alloy layer. An Mg–O phase is formed near the surface. An Mg–Ni alloy phase dominates at deeper regions. The Mg–Ni phase contains 80% of the total number of atoms in the film, and is non-stoichiometric and highly disordered. Nevertheless, it can give a remarkable change of electrical resistivity during hydridation–dehydridation processes. PACS 79.60.-i; 61.05.C-; 79.60.Ht     

An Indirect Competitive Fluorescence Immunoassay for Determination of Dicyclohexyl Phthalate in Water Samples

A sensitive and specific indirect competitive fluorescence immunoassays (FIA) has been developed for the quantitative determination of dicyclohexyl phthalate (DCHP) using an antigen-coated plate format. The polyclonal antibodies raised against dicyclohexyl 4-amino phthalate conjugated to bovine serum albumin (BSA) by the amino diazotization linkage method. Antiserum with a sufficiently high titer was generated in rabbits and fluorescein isothiocyanate (FITC) was used as sensitive labels to construct the fluorescence immunoassay (FIA) for measurement of targeted compounds. Under optimized FIA condition, the quantitative working range was from 0.1 to 200 μg L⁻¹ with a limit of detection of 0.05 μg L⁻¹. Other similar phthalate compounds do not interfere significantly in the analysis using this immunoassay technique, and the cross-reactivity rates were less than 10%. Four kinds of water samples (tap water, lake water, river water and leachate) had been detected in this assay, the recovery was 91.3–107.8%. The proposed fluorescence immunoassay turned out to be a powerful tool for monitoring of dicyclohexyl phthalate in water samples at trace level.     

Strong Photoluminescence Enhancement from Colloidal Quantum Dot Near Silver Nano-Island Films

We present the fabrication and optical investigation of highly random self-assembled, nano-scale films, probing their influence on the luminescence properties of near surface CdSe/ZnS colloidal quantum dots. When compared to quantum dots distributed on unstructured quartz substrates, the average luminescence intensity is found to be enhanced by a factor of 160×. The silver nanoparticles are prepared using slow thermal evaporation on quartz substrates and post-deposition annealing to produce a randomly-arranged layer of smooth nano-islands. Clear polarization dependent hot spots are observed. Such hot spots deliver a maximal enhancement of the emission intensity of 240× and have a spatial density of (0.050±0.002) μm^− 2. The results show that silver nano-island films strongly enhance the optical efficiency of near quantum dots emitters.     

Self Assembly of the Metal Nanoparticles: Formation of the Highly Oriented,Core-Shell Type,Bimetallic Gold–Silver Film

A synthetic route is presented for the preparation of a bimetallic gold–silver film under UV-irradiation. Methoxy polyethylene glycol, a water soluble polymer, is used as the reducing agent for the gold and silver ions in the presence of a ultra-violet source that results in the formation of gold and silver bimetallic nanoparticles. During stirring a centrifugal force is generated at the center of the solution, which results in a coalescence of the nanoparticles and forms a self-assembly of small subunits that ultimately produces a film-like network. UV–vis spectra and scanning electron microscopy were used to determine, respectively, the configuration of the gold and the silver in the nanoparticles, a Au_core–Ag_shell structure, and the thickness of the film.     

IR absorption and surface-enhanced Raman spectra of the isoquinoline alkaloid berberine

We present the IR absorption and surface-enhanced Raman scattering (SERS) spectra of the isoquinoline alkaloid berberine adsorbed on a silver hydrosol and on the surface of a silver electrode for different potentials. Based on quantum chemical calculations, for the first time we have assigned the vibrations in the berberine molecule according to vibrational mode. The effect of the potential of the silver electrode on the geometry of sorption of the molecule on the surface is considered, assuming a short-range mechanism for enhancement of Raman scattering. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 74, No. 1, pp. 31–36, January–February, 2007.     

Formation of SERS-active silver structures on the surface of mesoporous silicon

We have optimized the procedure for preparation of nanostructured silver films on the surface of mesoporous silicon (PSi) to use them as active substrates in surface-enhanced Raman scattering (SERS) spectroscopy. The greatest enhancement of the SERS signal was observed for samples obtained when the silver was deposited on PSi from an aqueous AgNO₃ solution with concentration 1⋅10^–2 M over a 10–15 minute period. The detection limit for rhodamine 6G on SERS-active substrates prepared by the optimized procedure was 1⋅10^–10 M. The enhancement factor for the SERS signal on these surfaces was estimated as ≈2⋅10⁸. We have shown that SERS-active substrates based on mesoporous silicon are promising for detection and study of complex organic compounds, in particular tetrapyrrole molecules. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 76, No. 2, pp. 298–306, March–April, 2009.     

Pulsed electron-beam melting of a copper — steel 316 system: Evolution of the chemical composition,microstructure, and properties

The surface topography, chemical composition, microstructure, nanohardness, and tribological characteristics of a Cu (film, 512 nm)-stainless steel 316 (substrate) system subjected to pulsed melting by a low-energy (20–30 keV), high-current electron beam (2–3 μs, 2–10 J/cm²) were investigated. The film was deposited by sputtering a Cu target in the plasma of a microwave discharge in argon. To prevent local exfoliation of the film due to cratering, the substrate was multiply pre-irradiated with 8–10 J/cm². On single irradiation, the bulk of the film survived, and a diffusion layer containing the film and substrate components was formed at the interface. The thickness of this layer was 120–170 nm irrespective of the energy density. The diffusion layer consisted of subgrains of γ-Fe solid solution and nanosized particles of copper. In the surface layer of thickness 0.5–1 μm, which included the copper film quenched from melt and the diffusion layer, the nanohardness and the wear resistance nonmonotonicly varied with energy density, reaching, respectively, a maximum and a minimum in the range 4.3–6.3 J/cm². As the number of pulsed melting cycles was increased to five in the same energy density range, there occurred mixing of the film-substrate system and a surface layer of thickness ∼2 μm was formed which contained ∼20 at. % copper. Displacement of the excess copper during crystallization resulted in the formation of two-phase nanocrystal interlayers separating the γ-phase grains. __________ Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 12, pp. 6–13, December, 2005.     

Microstructures and dielectric properties of compositionally graded (Ba1-xSrx) TiO3 thin films prepared by pulsed laser deposition

Compositionally graded (Ba_1-xSr_x)TiO₃ (BST) (x:0.0∼0.25) thin films were grown on Pt (111)/TiO₂/SiO₂/Si (100) substrates using layer-by-layer pulsed laser deposition in the temperature range 550–650 °C. Both downgraded (Ba/Sr ratio varying from 100/0 at the bottom surface to 75/25 at the top surface) and upgraded (Ba/Sr ratio varying from 75/25 at the bottom surface to 100/0 at the top surface) BST films were prepared. Their microstructures were systematically studied by X-ray diffractometry and scanning electron microscopy. A grain morphology transition from large ‘rosettes’ (>0.30 μm) to small compact grains (70–110 nm) was observed in the downgraded BST films as the deposition temperature was increased from 550 to 650 °C. No such grain morphology transition was detected in the upgraded BST films. Dielectric measurements with metal electrodes revealed an enhanced dielectric behavior in the downgraded films. This enhancement is mainly attributed to the large compressive stress field built up near the interface between the downgraded film and substrate. Furthermore, the BaTiO₃ layer in the downgraded BST films not only serves as a bottom layer but also as an excellent seeding layer for enhancing the crystallization of the subsequent film layers in the downgraded films. Received: 10 December 2001 / Accepted: 12 March 2002 / Published online: 19 July 2002 RID="*" ID="*"Corresponding author. Fax: 86-25/359-5535, E-mail: xhzhu@public1.ptt.js.cn     

Studies on Interaction of CdTe Quantum Dots with Bovine Serum Albumin Using Fluorescence Correlation Spectroscopy

Luminescent quantum dots (QDs) have widely used in some biological and biomedical fields due to their unique and fascinating optical properties, meanwhile the interaction of QDs with biomolecules recently attract increasing attention. In this paper, we employed fluorescence correlation spectroscopy (FCS) to investigate the nonspecific interaction between CdTe QDs and bovine serum albumin (BSA) as a model, and evaluate their stoichiometric ratio and association constant. Our results documented that BSA was able to bind to CdTe QDs and form the QD–BSA complex by a 1:1 stoichiometric ratio. The association constant evaluated is 1.06 ± 0.14 × 10⁷ M⁻¹ in 0.01 M phosphate buffer (pH = 7.4). Furthermore, we found that QD–BSA complex dissociated with increase of ion strength, and we speculated that the interaction of CdTe QDs with BSA was mainly attributed to electrostatic attraction. Our preliminary results demonstrate that fluorescence correlation spectroscopy is an effective tool for investigation of the interaction between quantum dots (or nanoparticles) and biomolecules.     

Complexation of pyrene and anthracene with human blood plasma

We have studied the interaction between polycyclic aromatic hydrocarbons (pyrene and anthracene) with human serum albumin (HSA) and human blood plasma. We have shown that the increase in the fluorescence intensity and the decrease in the polarity index of pyrene on going from an aqueous solution to a pH 7.4 buffer solution of HSA suggests that polycyclic aromatic hydrocarbons are localized in the hydrophobic microphase of the proteins. The increase in the fluorescence intensity for anthracene and pyrene, and also the decrease in the polarity index of pyrene on going from HSA to blood plasma is connected with the fact that polycyclic aromatic hydrocarbons can bind both to plasma proteins and to plasma lipids. When sodium dodecyl sulfate (SDS) is added to the blood plasma in a concentration greater than the critical micelle concentration, we observe an increase in the fluorescence intensity and the polarity index of pyrene. We hypothesize that this is connected with localization of pyrene near the interface between the hydrophobic and hydrophilic phases of the protein-SDS system. We have established that SDS leads to a change in the structure of blood plasma proteins and promotes escape of polycyclic aromatic hydrocarbons from the protein globules. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 75, No. 3, pp. 379–382, May–June, 2008.