中红外可调谐大能量飞秒脉冲激光产生

可调谐中红外飞秒光纤激光器具有非常普遍的应用,从而引起了人们的广泛关注。目前,非线性光纤中的拉曼孤子自频移效应是实现大范围可调谐飞秒脉冲激光的理想方法之一。然而,非线性光纤中其他高阶非线性效应的产生通常会限制拉曼孤子脉冲的能量提升。本文提出了利用有源掺杂光纤作为非线性介质和增益介质实现可调谐大能量中红外飞秒激光脉冲的方法。在理论上研究了有源掺杂非线性光纤中高阶孤子劈裂和孤子自频移效应的产生,以及线性增益对波长移动拉曼孤子能量、脉宽、光谱的影响。结果表明,通过为波长红移的低能量拉曼孤子提供线性增益,孤子脉冲的能量得到了显著提升且保持了其单脉冲特性,脉冲宽度为45 fs,且孤子脉冲的波长可通过所提供的增益进行大范围调谐。因此,利用有源掺杂光纤作为非线性介质是实现大能量可调谐中红外飞秒脉冲激光的一种有效方法。     

孤子光纤中拉曼自频移效应的研究

首次报道孤子光纤中拉曼自频移效庆的研究结果。对满足孤子光纤色散关系条件时含损耗，拉曼延迟效应的广义非线性薛定谔方程进行了微扰分析。求得了拉曼自频移关系表达式。发现改变光纤几何参数可以有效地控制孤子拉曼自频移。     

超短艾里脉冲在单模光纤中相互作用规律的研究

运用分步傅里叶变换法对适用于超短艾里脉冲的高阶耦合非线性薛定谔方程进行了求解,利用Matlab软件对超短艾里脉冲在单模光纤中传输时相互作用的演化过程进行了数值模拟。结果表明,负三阶色散效应可加快波包的渗透速度,超短脉冲可传输更远距离;正三阶色散效应可减慢超短脉冲的传输,当三阶色散系数足够大时脉冲前沿处的振荡转移到后沿处。自陡峭效应通过孤子分裂的形式使超短脉冲产生时域位移,内拉曼效应导致脉冲在波长较长一侧产生拉曼自频移,且超短脉冲的能量由前沿处转移到后沿处。自陡峭效应和内拉曼效应的共同作用导致超短脉冲产生时域位移且脉冲前沿处的能量会转移到后沿处。三阶色散效应、自陡峭效应、内拉曼效应三者同时存在时会显著影响超短艾里脉冲相互作用的自弯曲特性和自加速特性。     

拉曼散射与自陡峭效应对皮秒孤子传输特性的影响

通过求解包含拉曼增益和自陡峭效应的高阶非线性薛定谔方程, 运用MATLAB模拟了拉曼增益和自陡峭效应共同作用对孤子脉冲在各向同性光纤中传输特性的影响, 结果表明, 自陡峭效应会导致孤子产生时域位移, 而且会使高阶孤子产生孤子分裂现象. 与此同时, 拉曼增益改变了孤子的传输特性, 抑制了自陡峭效应, 从而导致脉冲宽度增大、脉冲偏移程度减弱、高阶孤子分裂成基阶孤子所需的传输距离增大.     

非自治拉曼多色孤子的管理和传输

以变系数的非自治非线性薛定谔方程为模型,考虑了一种色散、非线性和自发拉曼散射效应管理下的非自治系统,通过简单变换显式给出了该系统的精确非自治拉曼多色孤子解。基于精确孤子解,解析研究了该拉曼多色孤子在非自治管理系统中的演化特性,发现孤子的中心位置、波数与色散和非线性以及拉曼效应有关,而孤子频移仅与拉曼效应的参数决定,拉曼效应主导了非自治孤子的自频移,引起了孤子的频移在传输过程中不断的发生变化,导致了孤子的多色性。另外,我们数值讨论了该非自治孤子的传输稳定性,结果表明:该非自治拉曼多色孤子在有限的扰动下具有较好的稳定性。     

脉冲内拉曼散射影响下的孤子之间的相互作用及其控制

研究了脉冲内拉曼散射效应影响下的同相和反相相邻孤子脉冲之间的相互作用,分析了孤子之间的相互作用对定时抖动的影响和脉冲内拉曼散射效应对孤子频移的影响。研究结果表明:在脉冲内,在拉曼散射效应的影响下,同相基态孤子脉冲的周期性离合被破坏了,两孤子脉冲一次碰撞后一直处于排斥状态,并且在碰撞后自频移现象十分明显;反相孤子脉冲的影响则较弱,两孤子脉冲都向下降沿发生偏移。引入非线性增益可以有效地控制孤子之间的相互作用,抑制自频移效应和稳定孤子传输。     

三阶色散和受激拉曼散射效应对呼吸孤子作用的相互平衡

以高阶复系数Ginzburg-Landau方程为模型,就高阶非线性效应(比如:三阶色散、自陡峭、自频移等)对呼吸孤子传输特性的影响进行了详细的分析,结果表明:当各高阶非线性效应单独作用时,可能会导致呼吸孤子形状的不对称或脉冲中心偏移等现象,但是,当它们共同作用于呼吸孤子时,适当的参数选取可以使它们对呼吸孤子的影响相互抵消,从而使呼吸孤子实现保型传输。     

飞秒光脉冲在光子晶体光纤中的非线性传输和超连续谱产生

采用分步傅里叶方法数值模拟了飞秒光脉冲在光子晶体光纤中非线性传输和超连续谱的产生. 计算和分析了高阶色散和非线性效应对超连续谱形状和带宽的影响. 结果表明在光子晶体光纤中产生了孤子自频移现象. 同时也发现脉冲内拉曼散射和自相位调制的联合作用导致了超连续谱中精细结构的出现. 另外，还发现高阶色散和初始光脉冲的峰值功率对超连续谱的带宽和平滑也有直接影响. 关键词： 光子晶体光纤 孤子自频移 超连续谱     

数值模拟高阶色散和非线性对光孤子传输的影响

光孤子传输中的高阶色散以及高次非线性效应是光纤通讯发展的重要制约因素。从光孤子在光纤中的一般传输方程出发, 在较大的入纤功率的前提下, 综合考虑了高阶色散、五次非线性和损耗因素, 得到其具体传输方程, 并据此从理论上分析了高阶色散和非线性对光孤子传输性能的影响。本文采用分步傅里叶方法, 以MATLAB为实现工具, 实现高阶色散和非线性对光孤子传输影响的模拟计算, 并深入分析了高阶色散和非线性导致的孤子脉冲频移现象。计算结果表明: 在入射功率较大的时候, 高阶色散效应不可忽略。当五次非线性γ2>0时,孤子脉冲主峰发生微小频移; 而当五次非线性γ2<0时, 孤子脉冲主峰基座产生微小频移; 当高阶色散β3>0时频率出现红移, 而当β3<0时, 频率出现蓝移。     

非线性光学 非线性光学概论

O437 2007054311三阶色散和自频移效应对孤子压缩的影响=Influence of third -dispersion and Raman self-scattering on optical pulse compression[刊,中]/曹冬梅(延安大学物理与电子信息学院.陕西,延安(716000)) ,曾祥梅//常熟理工学院学报(自然科学版) .? 2007 ,21(4) .? 38-41通过数值求解高阶非线性Schr dinger方程,发现三阶色散和喇曼自频移效应对孤子脉冲的压缩会产生影响。正的三阶色散( TOD)和喇曼( RSS)效应使得孤子脉冲的压缩比减小;负的TOD和RSS效应使得孤子脉冲的压缩比增大。其中对于负的TOD和RSS效应,存在一个最佳…     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.     

A stereo matching algorithm using multi-peak candidate matches and geometric constraints

Gray cross correlation matching technique is adopted to extract candidate matches with gray cross correla- tion coefficients less than some certain range of maximal correlation coefficient called multi-peak candidate matches. Multi-peak candidates are extracted corresponding to three closest feature points at first. The corresponding multi-peak candidate matches are used to construct the model polygon. Correspondence is determined based on the local geometric relations between the three feature points and the multi-peak candidates. The disparity test and the global consistency checkout are applied to eliminate the remaining ambiguous matches that are not removed by the local geometric relational test. Experimental results show that the proposed algorithm is feasible and accurate.     

Hybrid Wavelength and Code Division Multiple Access in Optical Networks

A review of schemes for multiple access in fiber optic networks shows that a hybrid of wavelength and code division multiple access (WCDMA) combines the best features of both. In particular, the hybrid scheme retains the large information carrying capacity of wavelength division multiple access (WDMA) and flexibility of code division multiple access (CDMA). In this paper WDMA, optical CDMA (OCDMA), and WCDMA networks are discussed. In OCDMA networks, concept of incoherent and coherent coding including inverse decoding and matched filter is introduced. The delay performance of both WDMA and WCDMA networks, under the simple suboptimum access protocols based on cyclic search, is computed. It has been shown quantitatively that tuning delay significantly affects the delay performance of both WDMA and WCDMA networks. Futhermore, delay performance of WCDMA networks is always better than the WDMA networks for the same tuning delay, load, and number of users.     

Fiber Modal Index Measurements Based on Fiber Gratings

A novel method based on fiber gratings for measuring the effective indices of fiber modes is proposed. The effective index difference between the core mode and a cladding mode was obtained by analyzing the interference fringe of a pair of cascaded long-period fiber gratings. In order to extract the core mode index from the measured index difference, an index matching oil immersion method is proposed. By analyzing the interaction between the cladding mode and the oil applied on the cladding surface, the mode order and the effective index of the involved cladding mode might be calculated. Experimental results about the interference fringe shifts induced by the oil index and the oil-applied length are also presented.     

Optical Pulse Compression Schemes That Use Nonlinear Bragg Gratings

Nonlinear optical pulse compression of picosecond pulses typically requires long lengths of optical fiber and multiple components. Periodic structures, such as fiber Bragg gratings, are highly dispersive at wavelengths outside of the photonic bandgap. This implies that such gratings can be used as very short all-fiber compressors. In this paper a number of such compression schemes are reviewed involving uniform and nonuniform fiber Bragg gratings, relying on both soliton and nonsoliton compression principles. Experimental results supporting the corresponding underlying theory are also presented. Finally, an extension of one of the compression schemes is shown, which allows the generation of adjustable high-repetition rate soliton trains.