Micelles from PEO-PPO-PEO block copolymers as nanocontainers for solubilization of a poorly water soluble drug hydrochlorothiazide

The effect of molecular characteristics of EO-PO triblock copolymers viz. Pluronic(?) P103 (EO(17)PO(60)PEO(17)), P123 (EO(19)PO(69)EO(19)), and F127 (EO(100)PO(65)EO(100)) on micellar behavior and solubilization of a diuretic drug, hydrochlorothiazide (HCT) was investigated. The critical micellization temperatures (CMTs) and size for empty as well as drug loaded micelles are reported. The CMTs and micelle size depended on the hydrophobicity and molecular weight of the copolymer; a decrease in CMT and increase in size was observed on solubilization. The solubilization of the drug hydrochlorothiazide (HCT) in the block copolymer nanoaggregates at different temperatures (28, 37, 45°C), pH (3.7, 5.0, 6.7) and in the presence of added salt (NaCl) was monitored by using UV-vis spectroscopy and solubility data were used to calculate the solubilization characteristics; micelle-water partition coefficient (P) and thermodynamic parameters of solubilization viz. Gibbs free energy (ΔG(s)°), enthalpy (ΔH(s)°) and entropy (ΔS(s)°). The solubility of the drug in copolymer increases with the trend: P103>P123>F127. The solubilized drug decreased the cloud point (CP) of copolymers. Results show that the drug solubility increases in the presence of salt but significantly enhances with the increase in the temperature and at a lower pH in which drug remains in the non-ionized form.     

PEO–PPO based star-block copolymer T904 as pH responsive nanocarriers for quercetin: Solubilization and release study

Solubilization of quercetin (QN), a hypolipidemic drug in aqueous micellar solution of a star-like octablock Tetronic® T904 covering different salt concentration, pH and temperature is investigated. The change in pH modulates the charge of the copolymer which alters the dibasic nature of the centrally located ethylenediamine moiety and makes T904 undergo deprotonation favoring self assembly. At low pH, the columbic repulsion among the positively charged amine groups of Tetronic® hinders micellization while presence of salt facilitates it. The drug solubility data for micelles in aqueous/salt solutions determined by UV–Visible spectroscopy and micellar size with loaded drug from dynamic light scattering (DLS) are reported. Hydrophobic/anionic QN, deprotonates T904 and induces the micellization in acidic pH thus assisting solubilization. The expected locus (site) of the QN in T904 micelles was successfully correlated by the significant and positive cross peaks obtained from two-dimensional nuclear Overhauser effect spectroscopy (2D-NOESY). The evaluated in vitro release profile employing different kinetic models explains the controlled release of drug from T904 micelles.     

Structure and interactions of charged triblock copolymers studied by small-angle X-ray scattering: dependence on temperature and charge screening

A series of thermo-responsive cationic triblock copolymers composed of methoxy-poly(ethylene glycol) (MPEG, hydrophilic), poly(N-isopropylacrylamide) (PNIPAAM, temperature sensitive), and poly((3-acrylamidopropyl) trimethyl ammonium chloride) (PN(+), cationic) has been investigated as a function of temperature and ionic strength. In the MPEG-b-PNIPAAM-b-PN(+) copolymers, the MPEG block length is constant, and the lengths of the PNIPAAM and PN(+) blocks are varied. The solubility of the PNIPAAM block decreases with increasing temperature, and the triblock copolymer thus provides the possibilities of studying micelles with both neutral and charged blocks in the micelle corona as well as the interplay between these two blocks as the electrostatic interactions are varied by addition of salt. Investigation of the systems by densitometry and small-angle X-ray scattering (SAXS) in a temperature range from 20 to 70 °C gave detailed information on the behavior both below and above the critical micelle temperature (CMT). A clear effect of the addition of salt is observed in both the apparent partial specific volume, obtained from the densitometry measurements, and the SAXS data. Below the CMT, the single polymers can be described as Gaussian chains, for which the repulsive interchain interactions, originating from the charged PN(+) block, have to be taken into account in salt-free aqueous solution. Increasing the salt concentration of the solution to 30 mM NaCl leads to an increase in the apparent partial specific volume, and the electrostatic repulsive interchain interactions between the single polymers vanish. Raising the temperature results in micelle formation, except for the copolymer with only 20 NIPAAM units. The SAXS data show that the polymer with the medium PNIPAAM block length forms spherical micelles, whereas the polymer with the longest PNIPAAM block forms cylindrical micelles. Increasing the temperature further above the CMT results in an increase in the micellar aggregation number for both of the polymers forming spherical and cylindrical micelles. The addition of salt to the solution also influences the aggregates formed above the CMT. Overall, the micelles formed in the salt solution have a smaller cross-section radius than those in aqueous solution without added salt.     

Concentration, temperature, and salt-induced micellization of a triblock copolymer Pluronic L64 in aqueous media

The effect of copolymer concentration, temperature, and sodium halides (NaI, NaBr, NaCl, and NaF) on micellization and micellar properties of a poly(ethylene oxide)-block-poly(propylene oxide)-block-poly(ethylene oxide) (PEO-PPO-PEO) amphiphilic copolymer (Pluronic L64: EO13PO30EO13), was examined by different methods such as dye spectral change, Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), small angle neutron scattering (SANS), dynamic light scattering (DLS), viscosity, and cloud point (CP). Temperature/polymer concentration/salt dependent aggregation behavior of L64 was observed. The data on critical micelle concentration (CMC), critical micelle temperature (CMT), (CP), micelle size, and shape are reported. The Fourier transform infrared (FTIR) showed temperature dependent changes in C-O-C stretching variation band towards higher wave numbers and broadening of band width during the micellization process; this was attributed to increase in proportion of the anhydrous methyl groups, while the proportion of the hydrated methyl groups was decreased. Differential scanning calorimetry (DSC) provides CMTs and CPs from the same experiment. CMC values derived from dye spectral change, decrease significantly with the addition of salt. The increases in salt/copolymer concentration lower the onset temperature of micellization (CMT). Halide anions influence both CMT and CP in the order of F- > Cl- > Br- > I- when total salt and copolymer concentration kept constant. SANS results show the increase of inter-micellar interaction due to the increase in temperature/salt concentration; this is supported by viscosity data.     

Temperature-dependent aggregation and disaggregation of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) block copolymer in aqueous solution

Aggregation and disaggregation of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) block copolymers, Pluronics P103 and P104, in aqueous solutions during a heating and cooling cycle were investigated by dynamic laser scattering (DLS) and 1H NMR spectroscopy. Temperature hysteresis was observed by DLS when cooling the copolymer aqueous solutions because larger aggregates existed at temperatures lower than critical micellization temperature (CMT), but no temperature differences were observed by NMR. This phenomenon was explained as the forming of water-swollen micelles at temperatures lower than CMT during the cooling process.     

Highly-controlled grafting of mono and dicationic 4,4'-bipyridine derivatives on SBA-15 for potential application as adsorbent of CuCl(2) from ethanol solution

Ultra-large-pore FDU-12 (ULP-FDU-12) silica with face-centered cubic structure (Fm3m type) of spherical mesopores was synthesized using Pluronic F127 triblock copolymer (EO(106)PO(70)EO(106)) and ethylbenzene as a new micelle expander at initial temperature of 14 °C. Ethylbenzene was identified on the basis of its reported extent of solubilization in poly(ethylene oxide)-poly(propylene oxide)-type surfactant micelles, which was similar to that of xylene, the latter having been shown earlier to afford ULP-FDU-12. The unit-cell parameter of as-synthesized ULP-FDU-12 was 55 nm, which is similar to the highest value reported when xylenes (mixture of isomers) were used and larger than that achieved with trimethylbenzene. The unit-cell parameter of calcined ULP-FDU-12 reached 52 nm. For the obtained materials, the nominal pore cage diameter calculated from nitrogen adsorption reached 32 nm, whereas the actual pore cage diameter calculated using the geometrical relation was 36 nm. The pore entrance size was below 5 nm before the acid treatment, but was greatly enlarged as a result of the treatment. The sample prepared without hydrothermal treatment was converted to ordered closed-pore silica at as low as 400-450 °C. Our study confirms the ability to select micelle expanders on the basis of data on solubilization of compounds in micelle solutions.     

Interaction and solubilization of some phenolic antioxidants in Pluronic® micelles

The solubilization of four phenolic antioxidants, namely p-hydroxybenzoic acid (PHBAA), syringic acid, sinapic acid, and quercetin in micelles of an ethylene oxide (EO)–propylene oxide (PO) triblock copolymer Pluronic^® P104 (EO₂₇–PO₆₁–EO₂₇, PPO mol wt = 3540, % PEO = 40) was examined at different temperatures, pHs, and in the presence of sodium chloride. The nano-size core–shell micelles of P104 characterized by dynamic light scattering had hydrodynamic diameter of about 18–20 nm with low polydispersity. Antioxidants induced micellization and micellar growth were observed. The critical micellar concentration (CMC), critical micellar temperature (CMT), cloud point (CP) of P104 decreased due to solubilization and interactions of antioxidants. The solubilization was favored at higher temperature, pH and in the presence of salt and follows the order PHBA > syringic acid > sinapic acid > quercetin which corresponds to the trend in their aqueous solubility. The location of antioxidant in micelles observed from NOESY spectra. Structure and hydrophobicity of antioxidants were found to be governing factors for their interaction and location in the micelles.     

Effect of sodium chloride on association behavior of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) block copolymer in aqueous solutions

The effect of sodium chloride (NaCl) upon the thermally induced association behavior of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) block copolymer, Pluronic P103, has been investigated using pyrene fluorescence spectroscopy. The critical micellization temperature (CMT) of Pluronic P103 in aqueous solution is decreased by the addition of NaCl. The standard enthalpy and entropy of micellization for Pluronic P103 in water are increased in the presence of small amounts of NaCl, but further addition of NaCl decreases the standard enthalpy and entropy of micellization. The I1/I3 ratio of pyrene in aqueous Pluronic P103 solutions at temperature below the CMT decreases with increases of NaCl concentration, which is related to the decrease of PPO solubility. The decrease in polarity of the PPO shifts the CMT toward lower temperature.     

Sodium chloride and ethanol induced sphere to rod transition of triblock copolymer micelles

Dynamic light scattering (DLS), small-angle neutron scattering (SANS), and viscosity studies have been carried out to examine the influence of NaCl and ethanol on the structure of triblock copolymer [(EO)20(PO)70(EO)20] (EO = ethylene oxide; PO = propylene oxide) micelles in aqueous medium. The studies show that while the pure triblock copolymer solutions do not show any significant growth of the micelles on approaching the cloud point, the presence of a small amount of ethanol (5-10%) induces a sphere to rod shape transition of micelles at high temperatures. Interestingly, this ethanol induced sphere to rod transition of micelles can be brought down to room temperature (25 degrees C) with the addition of NaCl. It is also found that NaCl alone cannot induce such sphere to rod transitions and excess ethanol suppresses them by increasing their transition temperature.     

Salt‐Induced Micellization of Pluronic F88 in Water

The effect of potassium chloride on the micellization of a poly(ethylene oxide)‐poly(propylene oxide)‐poly(ethylene oxide) (PEO‐PPO‐PEO) triblock copolymer (Pluronic F88: EO₁₀₃PO₃₉EO₁₀₃.) in water was studied by fluorescence, FTIR, ¹H NMR, dynamic light scattering, and dye solubilization. The critical micellization temperature (CMT) values of the copolymer decreased with an increase of KCl concentration while micellar core gets progressively dehydrated. The results reveal the leading role of salt‐water interaction in promoting the micellization of PEO‐PPO‐PEO copolymer by the addition of salt. No significant micellar growth was seen even at temperatures close to cloud point.     

Room temperature sphere-to-rod growth and gelation of PEO-PPO-PEO triblock copolymers in aqueous salt solutions

The effects of NaCl and KF on the sphere-to-rod micellar growth behavior of triblock copolymers having two different compositions, (EO)20(PO)70(EO)20 (P123) and (EO)26(PO)40(EO)26 (P85), have been studied by dynamic light scattering (DLS), small angle neutron scattering (SANS) and dilute solution viscometry. NaCl can effectively tune the sphere-to-rod growth temperature of the micelles of both these copolymers and induce micellar growth down to the room temperature and below. The growth behavior is found to be dependent on the composition of the copolymer as P123 being more hydrophobic shows the room temperature growth in the presence of ethanol at significantly lesser NaCl concentration than the less hydrophobic copolymer P85. DLS studies depict for the first time the growth driven transition of the copolymer solutions from dilute to semi-dilute regime as a function of copolymer and salt concentrations. KF can also induce room temperature growth of the P123 micelles at lesser salt concentration than NaCl but it fails to induce any such growth of the P85 micelles. A pseudo-binary temperature-concentration phase diagram on 15% copolymer solutions shows the variation of the sphere-to-rod transition temperature and the cloud point of the copolymer solutions as a function of salt concentration.     

Aqueous block copolymer-surfactant mixtures and their ability in solubilizing chlorinated organic compounds. A thermodynamic and SANS study

Within the topic of surfactant enhanced solubilization of additives sparingly soluble in water, volumetric, solubility, conductivity, and small-angle neutron scattering (SANS) experiments on mixtures composed of alpha,omega-dichloroalkane, surfactant, copolymer, and water were carried out at 298 K. The triblock copolymers (ethylene oxide)132(propylene oxide)50(ethylene oxide)132 (F108) and (ethylene oxide)76(propylene oxide)29(ethylene oxide)76 (F68) were chosen to investigate the role of the molecular weight keeping constant the hydrophilic/hydrophobic ratio. The selected surfactants are sodium decanoate (NaDec) and decyltrimethylammonium bromide (DeTAB) with comparable hydrophobicity and different charged heads. The alpha,omega-dichloroalkanes were chosen as contaminant prototypes. For the water + surfactant + copolymer mixtures, both the volume and the SANS results straightforwardly evidenced that (1) monomers of NaDec and copolymer unimers generate small mixed aggregates, (2) monomers of DeTAB combined with copolymer unimers do not form aggregates, and (3) unimeric copolymer is solubilized into NaDec and DeTAB micelles. The alpha,omeaga-dichloroalkanes presence induces the F108 aggregation even at very low copolymer composition. The addition of surfactant disintegrates the F108 aggregates and, consequently, the additive is expelled into the aqueous phase. Once F108 is in the unimeric state, it forms copolymer-micelle aggregates which incorporate the oil. In the case of F68 both the volumetric and the SANS data reveal that the additive does not alter the copolymer unimeric state. Moreover, they show that for the aqueous DeTAB-F68 system the additive trapping in both the copolymer-micelle aggregate and the pure micelles takes place being enhanced in the former aggregate in agreement with solubility experiments. For the NaDec-F68 mixtures, an additional solubilization process in the premicellar copolymer-surfactant microstructures occurs. SANS and conductivity data show that the additive incorporation into the mixed and the pure micelles does not essentially influence the structural properties of the aggregates.     

Synthesis of Y-shaped poly(solketal acrylate)-containing block copolymers and study on the thermoresponsive behavior for micellar aggregates

One novel type of Y-shaped amphiphilic copolymers with two hydrophobic poly(solketal acrylate) (PSA) branches and one hydrophilic monomethoxy poly(ethylene glycol) (MPEG) block was synthesized by atom transfer radical polymerization (ATRP). These Y-shaped polymers can disperse in aqueous media to self-assemble into micellar aggregates with a spherical core-shell structure. The aqueous copolymer solutions exhibited transmittancy transition in the temperature range of 30-60 °C via optical transmittance measurements. An interesting thermo-dependent size of the micellar aggregates was observed by dynamic light scattering techniques and transmission electron microscopy, which showed that the micelle diameters were decreased with temperature increasing. The nile red release from the micelles at 25 °C and 37 °C under various pHs showed that temperature has great influence on release behavior. With good biocompatibility, the micellar aggregates formed from MPEG-block-(PSA)(2) may serve as one promising thermosensitive nanovehicle for targeted drug delivery.     

Diffusion Coefficients and Structure Properties in the Pluronic F127/n‐C4H9OH/H2O System

Abstract

Diffusion coefficients of different aggregates in aqueous solutions formed by an amphiphilic block copolymer, Pluronic F127 (F127), were determined by cyclic voltammetry, and the critical micelle concentration (CMC, 4.31 × 10^?4 mol L^?1) of F127 was obtained. The added n‐butanol facilitates the formation of micelles from the monomers of F127 and makes the critical micelle temperature (CMT) of F127 solutions decrease. The diffusion coefficient of the F127 micelles decreases relatively fast at first with increasing n‐butanol and then the decreasing trend slows after the solubilization of n‐butanol in micelles reaches maximum.     

Solubilization and Release of a Model Drug Nimesulide from PEO–PPO–PEO Block Copolymer Core–Shell Micelles: Effect of Size of PEO Blocks

The commercially available polypropylene oxide (PPO)–polyethylene oxide (PEO) symmetrical triblock copolymers (Pluronics^®) have been recognized as pharmaceutical excipients and used in a variety of applications. This paper reports studies on micellar and solubilization behavior of three PEO–PPO–PEO block copolymers, viz. P103, P104 and P105 (same PPO mol. wt = 3250 g·mol^?1 but different  % PEO = 30, 40 and 50 %, respectively) in aqueous solutions. Critical micellization concentrations (CMCs), critical micellization temperatures (CMTs), and micelle size/polydispersity for copolymers with and without the drug, nimesulide (NIM), are reported. The solubilization of NIM is significantly enhanced with increasing hydrophobicity (P103 > P104 > P105), concentration, temperature and in the presence of added salt. The copolymer hydrophobicity, temperature and the drug loading strongly affect micelle behavior. The micelle–water partition coefficient (P) and thermodynamic parameters of solubilization, viz. Gibbs energy ( $ \Updelta G_{s}^{\text{o}} $ ), enthalpy ( $ \Updelta H_{s}^{\text{o}} $ ) and entropy ( $ T\Updelta S_{s}^{\text{o}} $ ), were calculated. The solubilization site of the drug in different micellar solutions and its release from Pluronics^® micelles in phosphate buffer saline (PBS) solution at 37 °C were examined. The kinetics of NIM exhibits burst release characteristics, which are believed to be controlled by degradation of the copolymers. These studies were carried out to investigate the feasibility of using Pluronics^® as a release vehicle of nimesulide in vitro. From the results, it was concluded that Pluronic^® based formulations might be practical for drug delivery.     

Micellization of non-surface-active diblock copolymers in water. Special characteristics of poly(styrene)-block-poly(styrenesulfonate)

Strongly ionized amphiphilic diblock copolymers of poly(styrene)-b-poly(styrenesulfonate) with various hydrophilic and hydrophobic chain lengths were synthesized by living radical polymerization, and their properties and self-assembling behavior were systematically investigated by surface tension measurement, foam formation, hydrophobic dye solubilization, X-ray reflectivity, dynamic light scattering, small-angle neutron scattering, small-angle X-ray scattering, and atomic force microscope techniques. These copolymer solutions in pure water did not show a decrease of surface tension with increasing polymer concentration. The solutions also did not show foam formation, and no adsorption at the air/water interface was confirmed by reflectivity experiments. However, in 0.5 M NaCl aq solutions polymer adsorption and foam formation were observed. The critical micelle concentration (cmc) was observed by the dye solubilization experiment in both the solutions with and without added salt, and by dynamic light scattering we confirmed the existence of polymer micelles in solution, even though there was no adsorption of polymer molecules at the water surface in the solution without salt. By the small-angle scattering technique, we confirmed that the micelles have a well-defined core-shell structure and their sizes were 100-150 A depending on the hydrophobic and hydrophilic chain length ratio. The micelle size and shape were unaffected by addition of up to 0.5 M salt. The absence of polymer adsorption at the water surface with micelle formation in a bulk solution, which is now known as a universal characteristic for strongly ionized amphiphilic block copolymers, was attributed to the image charge effect at the air/water interface due to the many charges on the hydrophilic segment.     

Copolymers sensitive to temperature and pH in water and in water+oil mixtures: A DSC, ITC and volumetric study

Block copolymer micelles are receiving an increasing interest because of the variety of structures and the possibilities to tune them by changing external and internal parameters achieving the desired properties for a specific purpose. We have investigated the acid/base behavior, self-assembling and solubilization ability towards polar oils of star-like copolymers named Tetronics. They are composed of branched four-arms each one consisting of two blocks made of EO and PO units linked to the diethylenediamine group, which confers pH response ability. The copolymers T1107 and T90R4 were studied with a sequential and reverse architecture. The thermodynamics of the acid/base equilibrium was studied by ITC. The aggregation of T1107 in water was analyzed as functions of pH, composition and temperature. The enhanced oil solubilization in the aqueous T1107 aggregates was widely investigated highlighting the role of the oil structure, composition, temperature and pH. As a general result, the oil induces the copolymer aggregation and the solubilization power of micelles is tunable by changing the pH. Efforts have been devoted to model the calorimetric data in order to achieve the thermodynamic properties of the involved process. Finally, we showed that the Tetronic micelles are more promising than the conventional surfactants micelles because of the larger solubilization power and flexibility of the macromolecular system.     

Poly(ethylene oxide)-poly(styrene oxide)-poly(ethylene oxide) copolymers: Micellization, drug solubilization, and gelling features

Two new poly(ethylene oxide)-poly(styrene oxide) triblock copolymers (PEO-PSO-PEO) with optimized block lengths selected on the basis of previous studies were synthesized with the aim of achieving a maximal solubilization ability and a suitable sustained release, while keeping very low material expense and excellent aqueous copolymer solubility. The self-assembling and gelling properties of these copolymers were characterized by means of light scattering, fluorescence spectroscopy, transmission electron microscopy, and rheometry. Both copolymers formed spherical micelles (12-14 nm) at very low concentrations. At larger concentration (>25 wt%), copolymer solutions showed a rich phase behavior, with the appearance of two types of rheologically active (more viscous) fluids and of physical gels depending on solution temperature and concentration. The copolymer behaved notably different despite their relatively similar block lengths. The ability of the polymeric micellar solutions to solubilize the antifungal drug griseofulvin was evaluated and compared to that reported for other structurally-related block copolymers. Drug solubilization values up to 55 mg g⁻¹ were achieved, which are greater than those obtained by previously analyzed poly(ethylene oxide)-poly(styrene oxide), poly(ethylene oxide)-poly(butylene oxide), and poly(ethylene oxide)-poly(propylene oxide) block copolymers. The results indicate that the selected SO/EO ratio and copolymer block lengths were optimal for simultaneously achieving low critical micelle concentrations (cmc) values and large drug encapsulation ability. The amount of drug released from the polymeric micelles was larger at pH 7.4 than at acidic conditions, although still sustained over 1 day.     

A concise review of dynamical processes in polymorphic environments of a block copolymer: Rotational diffusion and photoisomerization

This article describes our ongoing efforts to understand dynamical processes such as rotational diffusion and photoisomerization in polymorphic environments of a block copolymer. The objective is to explore how the typical properties of a block copolymer solution such as critical micelle temperature (CMT) and temperature-induced sol-gel transition influence the rotational diffusion of hydrophobic solute molecules. Rotational diffusion of solute molecules differs significantly below and above the CMT of a block copolymer solution, while there is no influence of sol-gel transition on solute rotation. This is rationalized on the basis of the site of solubilization of the solute molecules which is the palisade layer of the micelles in both phases and unaffected by gelation. A similar result has been obtained in case of photoisomerization studies carried out with a carbocyanine derivative in the sol and gel phases of the block copolymer. The isomerization studies have been extended to the reverse phases (sol and gel phases) of the block copolymer to explore the nature of the water present in the cores of the reverse micelles. Our results provide evidence for the existence of water droplets with properties resembling bulk water. In essence, we show that despite having vastly differing bulk properties, both the solution and gel phases (normal as well as reverse) offer identical microscopic environment.     

Thermodynamics of demicellization of mixed micelles composed of sodium oleate and bile salts

Isothermal titration calorimetry (ITC) was used to determine the critical micelle concentration (cmc) and the thermodynamic parameters associated with the demicellization of sodium oleate (NaO) and mixed micelles composed of the bile salt (BS) sodium cholate (NaC) or sodium deoxycholate (NaDC), respectively, and NaO at a molar ratio of 5:2. The influence of the ionic strength (pure water and 0.1 M NaCl at pH 7.5) as well as that of the temperature (10-70 degrees C) were analyzed. For NaO, two cmc's were detected, indicating a two-step aggregation process, whereas only one cmc was observed for the two BSs. A single aggregation mechanism is also evident for the demicellization of mixed micelles (BS/NaO 5:2). Increasing the ionic strength induces the well-known decrease of the cmc. The cmc shows a minimum at room temperature. The cmc(mix) of the mixed micelles was analyzed using models assuming an ideal or nonideal mixing behavior of both detergents. The thermodynamic parameters describing the enthalpy (deltaHdemic), entropy (deltaSdemic), and Gibbs energy change (deltaGdemic), as well as the change in heat capacity (deltaCp,demic) for demicellization, were obtained from one ITC experiment. From the temperature dependence of deltaHdemic, the change of the hydrophobic surface area of the detergents from the micellar into the aqueous phase was derived. In all cases, the deltaCp,demic values are positive. In addition, the temperature dependence of the size of the formed aggregates was studied by dynamic light scattering (DLS). DLS indicated two populations of aggregates in the mixed system, small primary micelles (0.5-2 nm), and larger aggregates with a hydrodynamic radius in the range of 50-150 nm.