Micelles from amphiphilic block copolyphosphates for drug delivery

Amphiphilic block copolyphosphates (PEP-b-PIPPs) are synthesized by two-step ROP of cyclic phosphate monomers with different pedant groups. They can spontaneously self-assemble into approximately spherical micelles ranging in size between 89 and 198 nm in water. A typical hydrophobic anti-cancer drug DOX is encapsulated into the micelles. The release rate of DOX slows down with increasing hydrophobic block length of PIPP. DOX-loaded micelles are investigated for the proliferation inhibition of Hela cells and the DOX dose required for 50% cellular growth inhibition is found to be 0.8 μg mL(-1). It is demonstrated that PEP-b-PIPP micelles can be used as a safe and promising drug delivery system.     

Encapsulation and release by star‐shaped block copolymers as unimolecular nanocontainers

A five‐arm star‐shaped poly(ethylene oxide) (PEO) with terminal bromide groups was used as a macroinitiator for the atom transfer radical polymerization of tert‐butyl acrylate (tBA), resulting in five‐arm star‐shaped poly(ethylene oxide)‐block‐poly(tert‐butyl acrylate) block copolymers. The polymerization proceeded in a controlled way using a copper(I)bromide/pentamethyl diethylenetriamine catalytic system in acetonitrile as solvent. The hydrolysis of the tBA blocks of the amphiphilic star‐shaped PEO‐b‐PtBA block copolymer resulted in dihydrophilic star structures. The encapsulation of the star‐block copolymers and their release properties in acid environment have been followed by UV‐spectroscopy and color changes, using the dye methyl orange as a hydrophilic guest molecule. Characterization of the structures has been done by ¹H NMR, size exclusion chromatography, MALDI‐TOF, and differential scanning calorimetry. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 650–660, 2008     

Hydrothermal synthesis of ZnO nanobundles controlled by PEO-PPO-PEO block copolymers

Homocentric ZnO nanobundles with pyramidlike and hexagonal prism shapes were synthesized in colloidal systems formed by PEO-PPO-PEO amphiphilic block copolymers. The prism- and pyramidlike ZnO crystals were produced by L64 and F68, respectively, which may be attributed to the different growth rates of various crystal facets. It was proposed that the two processes for crystallization, including nucleation and crystal growth, happened in the macromolecular micelles under hydrothermal conditions. The room-temperature photoluminescence spectra of the ZnO products showed sharp ultraviolet emission located around 390 nm originating from the radiative recombination of free excitons. The sharp emission, with a half-maximum of about 8 nm, gave a powerful attestation that the sample was of high crystal quality, which was consistent with the SEM and TEM observations. The single ultraviolet emission is important for the application of ZnO-based materials in the electronic and photonic realms.     

Novel nanogels as drug delivery systems for poorly soluble anticancer drugs

Two types of novel nanogels were prepared using shell cross-linking of Pluronic F127 micelles with polyethylenimine (PEI) (F127/PEI nanogel), and penetrating network of poly(butylcyanoacrylate) (PBCA) in Pluronic F127 micelles (F127/PBCA nanogel). Poorly soluble anticancer drug, paclitaxel (PTX) and 10-hydroxycamptothecin (HCPT), were used as model drugs and incorporated into nanogels. The results obtained from FT-IR spectroscopy confirmed that the drugs were molecularly dispersed in the nanogels. DLS measurements demonstrated that the nanogel size distribution was narrow with average diameter less than 200 nm. TEM images indicated that the nanogels were spherical in shape and had smooth surfaces. The drug-loaded nanogels showed sustained release profiles compared with the free drugs as revealed by in vitro release experiments. Cytotoxicity tests showed that the cytotoxicity of drug-loaded nanogels against cancer cell in vitro was much higher than that of the free drug. The data demonstrate that these novel nanogels improved stability towards dilution, increased solubility and showed better cellular uptake by cells compared with free drug.     

Salt induced micellization of very hydrophilic PEO-PPO-PEO block copolymers in aqueous solutions

Symmetrical poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide), PEO-PPO-PEO, triblock copolymers with 80% polyethylene oxide (PEO, the hydrophilic end blocks) and polypropylene oxide (PPO, the hydrophobic middle block) usually remain as molecularly dissolved at ambient temperature even at fairly high-concentrations (2 wt.% or more). However, the micellization is induced at lower concentration/temperature in the presence of salts. The results on salt induced micellization from four such hydrophilic copolymers Pluronic^® F38, F68, F88 and F108 obtained from several independent techniques are described. FTIR and fluorescence results provide essentially identical critical micelle temperatures (CMTs) showing marked decrease with increase in PPO molecular weight and in the presence of salt. These copolymers were weakly surface active and did not show a clear break point in surface tension concentration plot typical of surfactants. While addition of salt decreases the cloud point, no significant micelle growth was observed even at temperature close to cloud point (CP). Marked increased in solubilization of an oil dye was observed in presence of KCl. Different methods showed good agreement in temperature/salt-induced micellization of these hydrophilic copolymers.     

Temperature-responsive magnetite/PEO-PPO-PEO block copolymer nanoparticles for controlled drug targeting delivery

In this study, temperature-responsive magnetite/polymer nanoparticles were developed from iron oxide nanoparticles and poly(ethyleneimine)-modified poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) block copolymer. The particles were characterized by TEM, XRD, DLS, VSM, FTIR, and TGA. A typical product has an approximately 20 nm magnetite core and an approximately 40 nm hydrodynamic diameter with a narrow size distribution and is superparamagnetic with large saturation magnetization (51.34 emu/g) at room temperature. The most attractive feature of the nanoparticles is their temperature-responsive volume-transition property. DLS results indicated that their average hydrodynamic diameter underwent a sharp decrease from 45 to 25 nm while evaluating the temperature from 20 to 35 degrees C. The temperature-dependent evolution of the C-O stretching band in the FTIR spectra of the aqueous nanoparticles solution revealed that thermo-induced self-assembly of the immobilized block copolymers occurred on the magnetite solid surfaces, which is accompanied by a conformational change from a fully extended state to a highly coiled state of the copolymer. Consequently, the copolymer shell could act as a temperature-controlled "gate" for the transit of guest substance. The uptake and release of both hydrophobic and hydrophilic model drugs were well controlled by switching the transient opening and closing of the polymer shell at different temperatures. A sustained release of about 3 days was achieved in simulated human body conditions. In primary mouse experiments, drug-entrapped magnetic nanoparticles showed good biocompatibility and effective therapy for spinal cord damage. Such intelligent magnetic nanoparticles are attractive candidates for widespread biomedical applications, particularly in controlled drug-targeting delivery.     

Aggregation and solubilization of organic solvents and petrol/gasoline in water mediated by block copolymers

A series of AB and ABA block copolymers of pDEGMEMA-b-pCHMA and pCHMA-b-pDEGMEMA-b-pCHMA cyclohexyl methacrylate (CHMA) and di(ethylene glycol) methyl ether methacrylate (DEGMEMA) with M_n ranging between 18,000 and 50,000 g mol⁻¹ and PDI = 1.09-1.32 were prepared via copper(I) mediated living radical polymerization with pyridylmethanimine ligands. Aggregation properties were investigated using a combination of ¹H NMR, dynamic and static light scattering. For comparative purposes poly(CHMA) and poly(DEGMEMA) homopolymers were prepared. The CAC values estimated for the di- and triblock copolymers soluble in cyclohexane are lower than 0.005 g L⁻¹ whereas the values found for block copolymers in methanol solutions are less than 0.070 g L⁻¹. DLS analysis showed the presence of micellar aggregates with diameters ranging from 25 to 40 nm with particle polydispersity indexes between 0.003 and 0.183. The pCHMA-b-pDEGMEMA-b-pCHMA micelles solubilized the aqueous phase in petrol/gasoline. The block copolymer-based micelles incorporate water within their hydrophilic domains, potentially overcoming a number of practical problems such as the formation of biphasic mixtures in solvent blends due to undesired water accumulation.     

一种三元共聚物磷酸盐的合成及性能研究

由丙烯酰胺、丙烯酸、3-二甲胺基烯丙基磷酸在过硫酸铵-亚硫酸氢钠氧化还原引发体系下合成了一种新型的AM/AA/DMAAPA三元共聚物.确立了最佳反应条件:AM/AA= 3/1(wt％),引发剂用量0.5wt％,pH为7,反应温度为40℃;并通过红外光谱分析确认了AM/AA/DMAAPA三元共聚物结构.当Na+;Cab,...     

Shell-cross-linked vesicles synthesized from block copolymers of Poly(D,L-lactide) and Poly(N-isopropyl acrylamide) as thermoresponsive nanocontainers

A polylactide (D,L-PLA) macroRAFT agent was prepared by utilizing a hydroxyl-functional trithiocarbonate as a coinitiator for the ring-opening polymerization. The length of the resultant polymer was controlled by the concentration of the coinitiator leading to the formation of two PLA polymers with M(n) = 12500 g mol(-)(1) (PDI = 1.46) and M(n) = 20500 g mol(-)(1) (PDI = 1.38) each with omega-trithiocarbonate functionality. Chain extension of PLA via the RAFT (free radical) polymerization of N-isopropyl acrylamide (NIPAAm) resulted in the formation of amphiphilic block copolymers with the PNIPAAm block increasing in size with conversion. TEM measurements of the aggregates obtained by self-organization of the block copolymers in aqueous solutions indicated the formation of vesicles. The sizes of these aggregates were influenced by the ratio of both blocks and the molecular weight of each block. The lower critical solution temperature (LCST) of the block copolymer was largely unaffected by the size of each block. UV turbidity measurements indicated a higher LCST for the block copolymers than for the corresponding PNIPAAm homopolymers. Stabilization of the vesicles was attained by a cross-linking chain extension of the PNIPAAm block using hexamethylene diacrylate. As the trithiocarbonate group was located between the PLA and PNIPAAm blocks, the chain extension resulted in a cross-linked layer between the core and corona of the vesicles.     

Amphiphilic block copolymers based on poly(2-acryloyloxyethyl phosphorylcholine) prepared via RAFT polymerisation as biocompatible nanocontainers

Amphiphilic block copolymers composed of poly(butyl acrylate) and poly(2-acryloyloxyethyl phosphorylcholine) have been prepared using reversible addition fragmentation transfer (RAFT) polymerisation. The conversion of the polymerisation was determined using online FT NIR spectroscopy. NMR spectroscopy was used not only to support the results obtained from FT NIR spectroscopy but also prove the formation of micelles. Due to the strong aggregation tendency of these block copolymers and the resulting difficulties concerning the molecular weight analysis test experiments were carried out replacing poly(2-acryloyloxyethyl phosphorylcholine) with poly(2-hydroxyethyl acrylate). Micelle size and the aggregation behaviour were investigated using dynamic light scattering. The sizes of the nanocontainers obtained were found to be influenced by the block length as well as the solvent leading to micelles in the range between 40 and 160 nm. The toxicity of the RAFT agent used was then analysed by cell growth inhibition tests.     

Effect of ionic liquids on the aggregation behavior of PEO-PPO-PEO block copolymers in aqueous solution

Effect of 1-butyl-3-methyl-imidazolium bromide (BmimBr) on the aggregation behavior of PEO-PPO-PEO Pluronic P104 aqueous solution was studied by Fourier transform infrared (FTIR) spectroscopy, freeze fracture transmission electron microscopy (FF-TEM), dynamic light scattering (DLS), and NMR spectroscopy. When the BmimBr concentration was below 1.232 mol/L, the critical micelle temperature (CMT) of Pluronic P104 remained constant, while the size of micelles increased with increasing the BmimBr concentration; above this concentration, the CMT of Pluronic P104 decreased abruptly, and bigger clusters of BmimBr were formed. The selective nuclear Overhauser effect (NOE) spectrum indicates that the PO block of the P104 interacts with the butyl group of the Bmim+ cation by hydrophobic interaction. It suggests that when the concentration of BmimBr is below 1.232 mol/L, there are P104 micelles in the aqueous solution with BmimBr embedding to the micellar core, while above this concentration, P104 micelles and BmimBr clusters coexist in the system.     

1H NMR spectroscopic investigations on the micellization and gelation of PEO-PPO-PEO block copolymers in aqueous solutions

The effects of temperature, polymer composition, and concentration on the micellization and gelation properties of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) block copolymers in aqueous solutions were investigated by 1H NMR spectroscopy. It was found that the temperature-dependent behavior of PPO blocks, observed as changes in chemical shift, half-height width, and integral value, could be attributed as an intrinsic tool to characterize the transition states during unimer to micelle formation. The 1H NMR spectral analysis revealed that the hydrophobic part, PPO, of the Pluronic polymers plays a more significant role in the temperature-induced micellization, whereas the transitional behavior of Pluronic polymer, i.e., from micellization to liquid crystals formation, resulted in the drastic broadening of the spectral signals for the PEO, indicating that the PEO segments play a more significant role in the crystallization process. It was also observed that the temperature-dependent changes in the half-height width of the PEO -CH2- signal are sensitive to the liquid crystalline phase formation, which could be attributed to the close packing of spherical micelles at high polymer concentrations or temperatures.     

The solubilization of fatty acids in systems based on block copolymers and nonionic surfactants

The solubilizing action of micellar, microemulsion, and polymer-colloid systems formed on the basis of biologically compatible amphiphilic polymers and nonionic surfactants on capric, lauric, palmitic, and stearic acids was characterized quantitatively. Systems based on micelle forming oxyethyl compounds increased the solubility of fatty acids by more than an order of magnitude. Acid molecules incorporated into micelles increased their size and caused structural changes. Solubilization was accompanied by complete or partial destruction of intrinsic acid associates and an increase in their pK _a by 1.5–2 units compared with water.     

Direct synthesis of soluble,end-functionalized polyenes and polyacetylene block copolymers

The ring-opening metathesis polymerization (ROMP) of 1,3,5,7-cyclooctatetraene (COT) in the presence of a chain transfer agent (CTA) with a highly active ruthenium olefin metathesis catalyst resulted in the formation of soluble polyenes. Small molecule CTAs containing an internal olefin and a variety of functional groups resulted in soluble telechelic polyenes with up to 20 double bonds. Use of polymeric CTAs with an olefin terminus resulted in polyacetylene block copolymers. These materials were subjected to a variety of solution and solid phase characterization techniques including (1)H NMR, UV/vis, and FT-IR spectroscopies, as well as MALDI-TOF MS and AFM.     

Characterization of a quaternary liquid system improving the bioavailability of poorly water soluble drugs

The aim of this work is the characterization of the quaternary system composed of water, triacetin (oil), ethanol (alcohol), and Tween 80 (surfactant), as its results enable the enhancement of the bioavailability of nimesulide, a poorly water soluble nonsteroidal antiinflammatory drug widely employed in the pharmaceutical field. Particular attention is devoted to the surfactant-free ternary system, as it proved able to solubilize nimesulide as well, and the absence of a surfactant is desirable in order to keep the preparation as tolerable as possible. Both bulk and interfacial properties of this system are investigated, and a mathematical model to calculate the interface composition of a three-component two-phase system is developed. This model is based on Gibbs' theory on interfaces, which considers an arbitrary mathematical dividing surface so that the two phases continue uniformly up to it, although interface regions have no sharply defined boundaries. We find that both the quaternary and the ternary systems investigated show a miscibility lacuna and that, in the surfactant-free ternary system, an increase of the ethanol weight fraction is reflected as an impoverishment of the ethanol interfacial molar fraction.     

Optimization of bioreducible micelles self‐assembled from amphiphilic hyperbranched block copolymers for drug delivery

Dendritic polymers‐based unimolecular micelles with enhanced stability are attractive carriers. However, the preparation of dendrimers or dendrons with higher generation remains substantially synthetic challenge due to the increased steric hindrance, multistep and tedious preparation, and low yields. The adoption of Boltorn H40, a commercially available dendritic polymer of Boltorn family containing multiple hydroxyl groups with various functionalities as a dendrimer‐based starting core template for the generation of hyperbranched polymers, offers a straightforward solution to address this problem. To develop universal strategies toward H40‐based amphiphilic block copolymers, the “grafting from” and “grafting to” approaches were both applied in this study. The reduction‐insensitive block copolymers, H40‐b‐poly(ɛ‐caprolactone)‐b‐poly(oligo(ethylene glycol) monomethyl ether methacrylate) (H40‐b‐PCL‐b‐POEGMA), were synthesized by “grafting from” including sequential ring‐opening polymerization (ROP) and atom transfer radical polymerization (ATRP). The core structure and the polymer composition of the nonreducible amphiphilic hyperbranched block copolymers were optimized toward better properties and performance for drug delivery applications, and H40‐PCL₁₅‐b‐POEGMA₂₃ was screened as the best polymer construct relative to H20‐PCL₁₅‐b‐POEGMA₂₃ and H40‐PCL₁₅‐b‐POEGMA₃₂ in terms of micelle stability and drug loading capacity. Therefore, the reducible H40‐b‐PCL‐SS‐POEGMA with an identical core and polymer composition to that of H40‐PCL₁₅‐b‐POEGMA₂₃ was further prepared by “grafting to” using click coupling between H40‐PCL‐azide and P(OEGMA)‐alkyne. The delivery efficacy evaluated by an in vitro cytotoxicity study revealed that the resulting DOX‐loaded reducible micelles of H40‐PCL₁₅‐SS‐POEGMA₂₃ produced greater cytotoxicity in cancer cells than in normal cells and macrophages, therefore, are promising carriers for anticancer drug delivery. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1383–1394     

Dendronised block copolymers as potential vectors for gene transfection

A series of block copolymers containing a dendronised cationic block for efficient DNA binding and a poly(ethylene glycol) block for encapsulation of the complex were synthesised in a modular fashion using a combination of click chemistry and ring-opening metathesis polymerisation. DNA binding experiments, investigated using gel electrophoresis, dynamic light scattering and transmission electron microscopy, showed that all polymers prepared in this study strongly complex DNA and self-assemble into polyion complex micelles with apparent hydrodynamic radii ranging from 20-120 nm at physiological pH (7.4). The in vitro transfection efficiency and toxicity of these potential non-viral vectors were also evaluated in HeLadouble dagger cells using plasmid DNA encoding for green fluorescent protein as the reporter gene.     

CdS-containing nano-assemblies of double hydrophilic block copolymers in water

Two samples of poly(sodium(sulfamate-carboxylate)isoprene)-block-poly(ethylene oxide) copolymer (SCIEO-1 and SCIEO-2) differing in molecular weight and relative length of polyelectrolyte blocks have been used as templates for the synthesis of cadmium sulfide (CdS) nanoparticles in aqueous media. The double-hydrophilic copolymer SCIEO has very high 1D charge density, and its polymer chain structure mimics that of polysaccharide heparin. It is soluble in aqueous media, but the addition of cadmium acetate (Cd(Ac)₂) to its aqueous solution causes the formation of micellar aggregates with Cd²⁺containing insoluble cores above the threshold Cd²⁺ concentration. The trapped Cd²⁺ ions can be chemically transformed to CdS nanoparticles. The stability of hybrid SCIEO/CdS micelles depends on the ratio of PEO-to-SCI lengths: it was found that the SCIEO-2 copolymer with sufficiently long PEO block behaves as an effective stabilizer for the synthesis of CdS nanoparticles embedded in micelles, while SCIEO-1 does not. The morphology of aggregates varies with the Cd-to-SCI ratios and ranges from spherical to mixture of spherical and necklace-like micellar aggregates. A number of experimental techniques including static and dynamic light scattering, fluorescence correlation spectroscopy, atomic force and transmission electron microscopy, UV-vis, and fluorescence spectroscopy were employed for the characterization of both CdS containing hybrid micelles and embedded CdS nanoparticles.     

Semipermeable polymer vesicle (PICsome) self-assembled in aqueous medium from a pair of oppositely charged block copolymers: physiologically stable micro-/nanocontainers of water-soluble macromolecules

A new entity of polymer vesicle with a polyion complex (PIC) membrane, a PICsome, was prepared by simple mixing of a pair of oppositely charged block copolymers, composed of biocompatible PEG and poly(amino acid)s, in an aqueous medium. Flow particle image analysis revealed the formation of spherical particles with a size range up to 10 mum. Observation by dark-field and confocal laser scanning microscopes clearly confirmed that the PICsome has a hollow structure with an inner-water phase, in which FITC-dextran emitting green fluorescence was successfully encapsulated simply by the simultaneous mixing with the block copolymers. Confocal laser scanning microscopic observation and spectral analysis revealed the smooth penetration of a low molecular weight fluorescent dye (TRITC; MW = 443.5) emitting red fluorescence into the FITC-dextran encapsulated PICsome to give the PICsome image with a merged color of yellows, indicating the semipermeable nature of the PICsome membrane. The PICsomes showed appreciable physiological stability even in the presence of serum proteins, suggesting their feasibility in biomedical fields such as carriers of therapeutic compounds and compartments for diagnostic enzymes.     

Enhanced release of the poorly soluble drug itraconazole loaded in ordered mesoporous silica

It is known that the energy of the amorphous state of itraconazole loaded in ordered mesoporous materials is high relative to that of the crystalline state and is responsible for enhanced solubility and dissolution rate. We investigated the effects of particle size(0.7–5μm), mesostructure(2D p6 mm, cubic Ia-3d and cubic Fm-3m) and pore size(2.2–15.4 nm) of mesoporous silicas on the release performance of itraconazole. Results indicated that the release performance was not influenced by the particle sizes tested here, that the release performance increased with increasing pore diameter due to the lower probability of drug molecules colliding to recrystallize in large pores, and that the release performance was decreased in the cage-type pore structure(Fm-3m) compared to that in the cylindrical pore structures(p6mm and Ia-3d) because of the small entrance to the cagelike pores that retards the drug release.